Centre for Precision Technologies

Research Output

1995

CMOS-process-independent average power dissipation macromodelling

Mather, P. J., Hallam, P. & Brouwer, M., 3 Aug 1995, In : Electronics Letters. 31, 16, p. 1337-1338 2 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

CMOS process independent propagation delay macromodelling

Hallam, P., Mather, P. J. & Brouwer, M., 27 Apr 1995, In : Electronics Letters. 31, 9, p. 702-703 2 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Sensitivity-based CMOS VLSI circuit performance optimisation

Mather, P. J., Hallam, P. & Brouwer, M., 26 Oct 1995, In : Electronics Letters. 31, 22, p. 1918-1919 2 p., 490659.

Research output: Contribution to journalArticle

1999
42 Citations (Scopus)
2000

Constructing virtual environments for manufacturing simulation

Xu, Z., Zhao, Z. & Baines, R. W., 1 Nov 2000, In : International Journal of Production Research. 38, 17, p. 4171-4191 21 p.

Research output: Contribution to journalArticle

20 Citations (Scopus)
66 Citations (Scopus)

Effect of secondary processing on EDM surfaces

Ramasawmy, H., Stout, K. & Blunt, L., 2000, In : Surface Engineering. 16, 6, p. 501-505 5 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)
Open Access
23 Citations (Scopus)
2001
31 Citations (Scopus)

Advances in surface analysis technology

Jiang, X. Q. & Blunt, L., 2001, Laser Metrology and Machine Performance V. Peggs, G. N. (ed.). WIT Press, p. 247-257 11 p. (Transactions in Engineering Sciences; vol. 34).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

An analogue test response compaction technique using delta-sigma modulation

Saine, S., Raczkowycz, J. & Mather, P., 1 Apr 2001, In : Microelectronics Journal. 32, 4, p. 339-350 12 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Application of the Lifting Wavelet to Rough Surfaces

Jiang, X. Q., Blunt, L. & Stout, K. J., 1 Apr 2001, In : Precision Engineering. 25, 2, p. 83-89 7 p.

Research output: Contribution to journalArticle

25 Citations (Scopus)

Comparison Study of the Birthogonal Spline Wavelet Filtering for Areal Rough Surfaces

Jiang, X. Q., Blunt, L., Scott, P. J. & Xiao, S. J., Oct 2001, In : International Journal of Machine Tools and Manufacture. 41, 13-14, p. 2103-2111 9 p.

Research output: Contribution to journalArticle

11 Citations (Scopus)

Lifting Wavelet for Three-Dimensional Surface Analysis

Jiang, X. Q., Blunt, L. & Stout, K. J., Oct 2001, In : International Journal of Machine Tools and Manufacture. 41, 13-14, p. 2163-2169 7 p.

Research output: Contribution to journalArticle

22 Citations (Scopus)

Volumetric Compensation Through The Machine Controller

Fletcher, S., Postlethwaite, S. R. & Ford, D. G., 2001, Laser Metrology and Machine Performance V. Peggs, G. N. (ed.). WIT Press, Vol. 34. p. 321-330 10 p. (WIT Transactions on Engineering Sciences; vol. 34).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
7 Citations (Scopus)
2002
28 Citations (Scopus)
31 Citations (Scopus)

Analytical and FE Identification of lowest natural frequency of a ball-screw drive in beaver machine

Xu, Q. & Ford, D., 30 Sep 2002, Advances in Manufacturing Technology XVI : NCMR 2002: Proceedings of the Eighteenth National Conference on Manufacturing Research. Cheng, K. & Webb, D. (eds.). John Wiley and Sons Ltd., p. 247-251 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Motif Assessment Method of Surface Topography and Its Development

Yang, L., Xie, T., Jiang, X. & Li, Z., 2002, In : Zhongguo Jixie Gongcheng/China Mechanical Engineering. 2002, 21, p. 1862-1865 4 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Progress in surface texture

Jiang, X. Q. & Blunt, L., 18 Aug 2002, Proceedings of the Second International Symposium on Instrumentation Science and Technology. Jiubin, T. & Xianfang, W. (eds.). Harbin Institute of Technology, Vol. 3. p. 462-468 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

The characterisation of grinding wheels using 3D surface measurement techniques

Butler, D. L., Blunt, L. A., See, B. K., Webster, J. A. & Stout, K. J., 30 Sep 2002, In : Journal of Materials Processing Technology. 127, 2, p. 234-237 4 p.

Research output: Contribution to journalArticle

58 Citations (Scopus)
2003

Applications of Numerical Parameters and Filtration

Blunt, L. & Jiang, X., 2003, Advanced Techniques for Assessment Surface Topography: Development of a Basis for 3D Surface Texture Standards "SURFSTAND". Blunt, L. & Jiang, X. (eds.). Elsevier Inc., p. 221-247 27 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

22 Citations (Scopus)

A review of the fundamentals of the finite element simulation of metal cutting

Xu, Q., Miller, B. & Ford, D., 2003, Laser Metrology and Machine Performance VI: Proceedings of the 6th International Conference on Laser Metrology, Machine Tool, CMM and Robot Performance. Lamdamap 2003. Ford, D. G. (ed.). WIT Press, Vol. 44. p. 391-399 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
1 Citation (Scopus)

Finite element analysis of the structural dynamics of a vertical milling machine

Myers, A., Ford, D. & Xu, Q., 2003, Laser Metrology and Machine Performance VI: Proceedings of the 6th International Conference on Laser Metrology, Machine Tool, CMM and Robot Performance. Lamdamap 2003. Ford, D. G. (ed.). WIT Press, Vol. 44. p. 431-440 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
9 Citations (Scopus)

Future Developments in Surface Metrology

Blunt, L., Jiang, X. & Scott, P. J., 6 Jun 2003, Advanced Techniques for Assessment Surface Topography: Development of a Basis for 3D Surface Texture Standards "SURFSTAND". Blunt, L. & Jiang, X. (eds.). Elsevier Inc., p. 339-347 9 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

2 Citations (Scopus)

Introduction: The History and Current State of 3D Surface Characterisation

Blunt, L., 2003, Advanced Techniques for Assessment Surface Topography: Development of a Basis for 3D Surface Texture Standards "Surfstand". Blunt, L. & Jiang, X. (eds.). Elsevier Inc., p. 1-13 13 p.

Research output: Chapter in Book/Report/Conference proceedingForeword/postscript

7 Citations (Scopus)

Investigation of the cutting force coefficients in ball-end milling

Liu, X. W., Cheng, K., Webb, D., Longstaff, A. P., Widiyarto, M. H., Jiang, X. Q., Blunt, L. & Ford, D. G., 1 Dec 2003, Laser Metrology and Machine Performance VI. Ford, D. G. (ed.). WIT Press, Vol. 44. p. 45-54 10 p. (Transactions on Engineering Sciences; vol. 44).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
2 Citations (Scopus)

Numerical Parameters for Characterisation of Topography

Blunt, L. & Jiang, X., 2003, Advanced Techniques for Assessment Surface Topography: Development of a Basis for 3D Surface Texture Standards "SURFSTAND". Blunt, L. & Jiang, X. (eds.). Elsevier Inc., p. 17-41 25 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

70 Citations (Scopus)
2004

Effect of EDM process parameters on 3D surface topography

Ramasawmy, H. & Blunt, L., 15 May 2004, In : Journal of Materials Processing Technology. 148, 2, p. 155-164 10 p.

Research output: Contribution to journalArticle

105 Citations (Scopus)

Experimental Investigation of the Machined Surface Waviness, Vibrations and Cutting Forces in Peripheral Milling

Liu, X. W., Cheng, K., Webb, D., Jiang, X. Q., Xiao, S. J., Longstaff, A. P., Widiyarto, M. H., Blunt, L. & Ford, D., 17 Feb 2004, In : Key Engineering Materials. 257-258, p. 213-218 6 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

High stability multiplexed fibre interferometer and its application on absolute displacement measurement and on-line surface metrology

Lin, D., Jiang, X., Xie, F., Zhang, W., Lin, Z. & Bennion, I., 15 Nov 2004, In : Optics Express. 12, 23, p. 5729-5734 6 p.

Research output: Contribution to journalArticle

Open Access
61 Citations (Scopus)

Improved dynamic cutting force model in peripheral milling. Part II: Experimental verification and prediction

Liu, X. W., Cheng, K., Webb, D., Longstaff, A. P. & Widiyarto, M. H., 1 Dec 2004, In : International Journal of Advanced Manufacturing Technology. 24, 11-12, p. 794-805 12 p.

Research output: Contribution to journalArticle

19 Citations (Scopus)

In Vivo Surface Wear Mechanisms of Femoral Components of Cemented Total Hip Arthroplasties: The Influence of Wear Mechanism on Clinical Outcome

Howell, J. R., Blunt, L. A., Doyle, C., Hooper, R. M., Lee, A. J. C. & Ling, R. S. M., Jan 2004, In : Journal of Arthroplasty. 19, 1, p. 88-101 14 p.

Research output: Contribution to journalArticle

73 Citations (Scopus)

Research on Method of Robust Extraction of Surface Roughness

Zeng, W., Xie, T., Jiang, X. & Li, Z., 2004, In : Zhongguo Jixie Gongcheng/China Mechanical Engineering. 2004, 2, p. 127-130 4 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)

Robust estimation in Gaussian filtering for engineering surface characterization

Li, H., Jiang, X. & Li, Z., 1 Apr 2004, In : Precision Engineering. 28, 2, p. 186-193 8 p.

Research output: Contribution to journalArticle

23 Citations (Scopus)

The use of CMM techniques to assess the functionality of total knee replacements

Bills, P., Blunt, L. & Hardaker, C., 7 Dec 2004, In : VDI Berichte. 1860

Research output: Contribution to journalArticle

2 Citations (Scopus)

Wear ranking of hard on hard bearings for prosthetic hip joints

Blunt, L. & Thomas, T. R., Dec 2004, In : Wear. 257, 12 SPEC.ISS., p. 1208-1212 5 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)
2005

A metrology solution for the orthopaedic industry

Bills, P., Brown, L., Jiang, X. & Blunt, L., 1 Jan 2005, In : Journal of Physics: Conference Series. 13, 1, p. 316-319 4 p.

Research output: Contribution to journalArticle

17 Citations (Scopus)

An Investigation on the Technical Standard Strategy for China's Manufacturing Industry

Limin, M., Xiangqian, J., Zhengao, X. & Zhu, L., 2005, In : Journal of Physics: Conference Series. 13, 1, p. 389-393 5 p.

Research output: Contribution to journalConference article

Open Access
2 Citations (Scopus)

Approximation of surface texture profiles

Brennan, J. K., Crampton, A., Jiang, X., Leach, R. K. & Harris, P. A., 1 Jan 2005, In : Journal of Physics: Conference Series. 13, 1, p. 264-267 4 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Characterisation of Surface Roughness for Ultra-Precision Freeform Surfaces

Jiang, X. Q., Li, H., Cheung, C. F., Lee, W. B. & To, S., 2005, In : Journal of Physics: Conference Series. 13, 1, p. 32-35 4 p.

Research output: Contribution to journalArticle

Open Access

Compensation of thermal errors on a small vertical milling machine

Fletcher, S., Longstaff, A. P. & Myers, A., 2005, Laser Metrology and Machine Performance VII: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2005. Shore, P. (ed.). euspen, p. 432-441 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)
14 Citations (Scopus)
Open Access
3 Citations (Scopus)

Complex wavelet transform based surface topography analysis

Zeng, W. & Jiang, X., 2005, Laser Metrology and Machine Performance VII: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2005. Shore, P. (ed.). euspen, p. 304-313 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Flexible modelling and compensation of machine tool thermal errors

Fletcher, S., Longstaff, A. P. & Myers, A., 1 Dec 2005, Proceedings of the 20th Annual ASPE Meeting, ASPE 2005.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Geometrical Characterisation of MST and Microfluidic Devices Using Novel Surface Metrology Techniques

Blunt, L., Xiao, S., Jiang, J. & Scott, P., 2005, Proceedings of the 5th International Conference of the European society for precision engineering and nanotechnology. Chevrier, F., Taliercio, T., Falgayrettes, P. & Gall-Borrut, P. (eds.). euspen, Vol. 1. p. 97-100 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Hybrid modelling technique applied to digital feed drives

Widiyarto, M. H. N., Pislaru, C., Ford, D. G., Longstaff, A. P. & Myers, A., 1 Jun 2005, Laser Metrology and Machine Performance VII : 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2005. Shore, P. (ed.). euspen, p. 454-463 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Improved dynamic cutting force model in ball-end milling. Part I: Theoretical modelling and experimental calibration

Liu, X. W., Cheng, K., Longstaff, A. P., Widiyarto, M. H. & Ford, D., 1 Sep 2005, In : International Journal of Advanced Manufacturing Technology. 26, 5-6, p. 457-465 9 p.

Research output: Contribution to journalArticle

15 Citations (Scopus)
4 Citations (Scopus)