Centre for Precision Technologies

Research Output

2019
Open Access
File
2 Citations (Scopus)
Open Access
File
Open Access
File
5 Citations (Scopus)

Improvements to dispersed reference interferometry: beyond the linear approximation

Henning, A., Williamson, J., Martin, H. & Jiang, X., 1 Jan 2019, In : Applied Optics. 58, 1, p. 131-136 6 p.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

In-situ axis error detection module

Furness, T., Fletcher, S., Longstaff, A., Bell, A. & McVey, S., Jun 2019, European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 19th International Conference and Exhibition, EUSPEN 2019: 19th International Conference and Exhibition . Leach, R. K., Billington, D., Nisbet, C. & Phillips, D. (eds.). euspen, p. 214-217 4 p. P2.24

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Introduction of a Surface Characterization Parameter Sdrprime for Analysis of Re-entrant Features

Townsend, A., Pagani, L., Scott, P. & Blunt, L., 1 Jun 2019, In : Journal of Nondestructive Evaluation. 38, 2, p. 1-10 10 p., 58.

Research output: Contribution to journalArticle

Open Access
File
4 Citations (Scopus)

Investigation of grinding mechanism of a 2D C f /C–SiC composite by single-grain scratching

Liu, Q., Huang, G., Cui, C., Tong, Z. & Xu, X., 1 Jul 2019, In : Ceramics International. 45, 10, p. 13422-13430 9 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Modelling and experimental investigation on textured surface generation in vibration-assisted micro-milling

Chen, W., Zheng, L., Xie, W., Yang, K. & Huo, D., 1 Apr 2019, In : Journal of Materials Processing Technology. 266, p. 339-350 12 p.

Research output: Contribution to journalArticle

14 Citations (Scopus)

Modulated diamond cutting for the generation of complicated micro/nanofluidic channels

Zhu, Z., To, S., Tong, Z., Zhuang, Z. & Jiang, X., 1 Mar 2019, In : Precision Engineering. 56, p. 136-142 7 p.

Research output: Contribution to journalArticle

Open Access
File
3 Citations (Scopus)

Numerical Analysis of the Effects of Pulsed Laser Spot Heating Parameters on Brazing of Diamond Tools

Wang, Y., Huang, G., Su, Y., Zhang, M., Tong, Z. & Cui, C., 27 May 2019, In : Metals. 9, 5, p. 1-11 11 p., 612.

Research output: Contribution to journalArticle

Open Access
2 Citations (Scopus)
Open Access
1 Citation (Scopus)

Quantitative analysis of cooling and lubricating effects of graphene oxide nanofluids in machining titanium alloy Ti6Al4V

Li, G., Yi, S., Li, N., Pan, W., Wen, C. & Ding, S., Sep 2019, In : Journal of Materials Processing Technology. 271, p. 584-598 15 p.

Research output: Contribution to journalArticle

10 Citations (Scopus)
Open Access
3 Citations (Scopus)

Single-shot 3D shape measurement of discontinuous objects based on a coaxial fringe projection system

Wang, Z., Zhang, Z., Gao, N., Xiao, Y., Gao, F. & Jiang, X., 11 Jan 2019, In : Applied Optics. 58, 5, p. A169-A178

Research output: Contribution to journalArticle

Open Access
16 Citations (Scopus)

Status, comparison, and future of the representations of additive manufacturing data

Qin, Y., Qi, Q., Scott, P. J. & Jiang, X., Jun 2019, In : CAD Computer Aided Design. 111, p. 44-64 21 p.

Research output: Contribution to journalArticle

Open Access
12 Citations (Scopus)
Open Access
4 Citations (Scopus)

Towards a new definition of areal surface texture parameters on freeform surface: Re-entrant features and functional parameters

Pagani, L., Townsend, A., Zeng, W., Lou, S., Blunt, L., Jiang, X. Q. & Scott, P. J., 1 Jul 2019, In : Measurement. 141, p. 442 - 459 18 p.

Research output: Contribution to journalArticle

Open Access
3 Citations (Scopus)

Training in the aeronautic industry for geometrical quality control and large scale metrology

Rocha, L., Bills, P., Marxer, M. & Savio, E., 2019, Proceedings of the 12th International Conference on Measurement and Quality Control. Pleiades Publishing, p. 162-169 8 p. (Lecture Notes in Mechanical Engineering).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Tuned diamond turning of micro-structured surfaces on brittle materials for the improvement of machining efficiency

Zhu, Z., Tong, Z., To, S. & Jiang, X., 2019, In : CIRP Annals. 68, 1, p. 559-562 4 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

UScale: a digital device for automatic urine volume measurement and frequency volume charting

Williamson, J., Qayyum, T., Bryan, N. & Blunt, L., 19 Sep 2019, In : Therapeutic Advances in Urology. 11, 7 p.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)
2018

3D shape measurement of discontinuous specular objects based on advanced PMD with bi-telecentric lens

Niu, Z., Gao, N., Zhang, Z., Gao, F. & Jiang, X., 22 Jan 2018, In : Optics Express. 26, 2, p. 1615-1632 18 p.

Research output: Contribution to journalArticle

Open Access
17 Citations (Scopus)

A comparative study on torsional fretting and torsional sliding wear of CuNiAl under different lubricated conditions

Zhang, P., Lu, W., Liu, X., Zhai, W., Zhou, M. & Jiang, X. J., 1 Jan 2018, In : Tribology International. 117, p. 78-86 9 p.

Research output: Contribution to journalArticle

15 Citations (Scopus)
Open Access
4 Citations (Scopus)

A holistic calibration method with iterative distortion compensation for stereo deflectometry

Xu, Y., Gao, F., Zhang, Z. & Jiang, X., 1 Jul 2018, In : Optics and Lasers in Engineering. 106, p. 111-118 8 p.

Research output: Contribution to journalArticle

10 Citations (Scopus)

A new surface topography-based method to quantify axial error of high speed milling cutters

Chen, W., Lu, L., Xie, W., Huo, D. & Yang, K., 31 Aug 2018, In : Journal of Manufacturing Science and Engineering, Transactions of the ASME. 140, 11, 9 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

A review of representation models of tolerance information

Qin, Y., Qi, Q., Lu, W., Liu, X., Scott, P. & Jiang, X., Mar 2018, In : International Journal of Advanced Manufacturing Technology. 95, 5-8, p. 2193-2206 14 p.

Research output: Contribution to journalArticle

Open Access
File
10 Citations (Scopus)

Behavior of In Situ Cross-Linked Hydrogels with Rapid Gelation Kinetics on Contact with Physiological Fluids

Diryak, R., Kontogiorgos, V., Ghori, M. U., Bills, P., Tawfik, A., Morris, G. A. & Smith, A., Apr 2018, In : Macromolecular Chemistry and Physics. 219, 8, 6 p., 1700584.

Research output: Contribution to journalArticle

Open Access
File
5 Citations (Scopus)
Open Access
File
16 Citations (Scopus)

Characterisation of powder-filled defects in additive manufactured surfaces using X-ray CT

Tawfik, A., Bills, P., Blunt, L. & Racasan, R., 1 Feb 2018, 8th Conference on Industrial Computed Tomography. 8 p. (Open Access Database of Nondestructive Testing).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File

Characterisation of wear areas on UHMWPE total knee replacement prostheses through study of their areal surface topographical parameters

Holland, M., Fleming, L., Walton, K., Cerquiglini, A., Hothi, H., Hart, A., Skinner, J. & Bills, P. J., 5 Jun 2018, In : Surface Topography: Metrology and Properties. 6, 3

Research output: Contribution to journalArticle

Open Access
File
2 Citations (Scopus)

Characterization of Material Loss from Femoral Stem Taper Surfaces through Development of a Responsive Morphological Filtering Technique

Dransfield, K., Racasan, R., Blunt, L. & Bills, P., 1 Jun 2018, Beyond the Implant: Retrieval Analysis Methods for Implant Surveillance. Mihalko, W. M., Lemons, J. E., Greenwald, A. S. & Kurtz, S. M. (eds.). West Conshohocken, USA: ASTM International, Vol. STP 1606. p. 173-190 18 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Chatter and deformation in machining thin-walled flexible components

Wu, G., Pan, W., Wang, X., Mo, J. & Ding, S., 1 Oct 2018, In : IOP Conference Series: Materials Science and Engineering. 423, 1, 012035.

Research output: Contribution to journalConference article

Open Access

Curvature based sampling of curves and surfaces

Pagani, L. & Scott, P. J., 1 Jan 2018, In : Computer Aided Geometric Design. 59, p. 32-48 17 p.

Research output: Contribution to journalArticle

Open Access
15 Citations (Scopus)

Distance Calibration between Reference Plane and Screen in Direct Phase Measuring Deflectometry

Huang, S., Liu, Y., Gao, N., Zhang, Z., Gao, F. & Jiang, X., 6 Jan 2018, In : Sensors. 18, 1, 15 p., 144.

Research output: Contribution to journalArticle

Open Access
7 Citations (Scopus)

Dynamic Testing and Characterization of Advanced Materials in a New Experiment at CERN HiRadMat Facility

Bertarelli, A., Accettura, C., Berthomé, E., Bianchi, L., Carra, F., Fichera, C., Frankl, M., Gobbi, G., Grosclaude, P., Valenzuela, J., Guinchard, M., Lechner, A., Pasquali, M., Redaelli, S., Rigutto, E., Sacristan de Frutos, O., Bolz, P., Simon, P., Furness, T., Mollicone, P. & 1 others, Portelli, M., Jun 2018, 9th International Particle Accelerator Conference . Joint Accelerator Conferences Website (JACoW), p. 2534-2537 4 p. WEPMF071

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
3 Citations (Scopus)
Open Access
7 Citations (Scopus)
Open Access
File
11 Citations (Scopus)

Generalization of profile texture parameters for additively manufactured surfaces

Pagani, L., Zanini, F., Carmignato, S., Jiang, X. & Scott, PJ., 13 Nov 2018, In : Journal of Physics: Conference Series. 1065, 21, 4 p., 212019.

Research output: Contribution to journalConference article

Open Access

Generic exponential fringe model for alleviating phase error in phase measuring profilometry

Chen, C., Gao, N., Wang, X., Zhang, Z., Gao, F. & Jiang, X., 1 Nov 2018, In : Optics and Lasers in Engineering. 110, p. 179-185 7 p.

Research output: Contribution to journalArticle

Open Access
File
16 Citations (Scopus)
Open Access
3 Citations (Scopus)

Modeling and analysis of sub-aperture tool influence functions for polishing curved surfaces

Wan, S., Zhang, X., Zhang, H., Xu, M. & Jiang, X., Jan 2018, In : Precision Engineering. 51, p. 415-425 11 p.

Research output: Contribution to journalArticle

13 Citations (Scopus)

Optimization of surface determination strategies to enhance detection of unfused powder in metal additive manufactured components

Tawfik, A., Bills, P., Blunt, L. & Racasan, R., 2018, Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing. American Society for Precision Engineering, ASPE, p. 281-285 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Performance analysis and evaluation of direct phase measuring deflectometry

Zhao, P., Gao, N., Zhang, Z., Gao, F. & Jiang, X., 1 Apr 2018, In : Optics and Lasers in Engineering. 103, p. 24-33 10 p.

Research output: Contribution to journalArticle

Open Access
20 Citations (Scopus)

Performance Analysis and Evaluation of Geometric Parameters in Stereo Deflectometry

Xu, Y., Gao, F. & Jiang, X., Dec 2018, In : Engineering. 4, 6, p. 806-815 10 p.

Research output: Contribution to journalArticle

Open Access
5 Citations (Scopus)

Phase unwrapping in digital holography based on non-subsampled contourlet transform

Zhang, X., Zhang, X., Xu, M., Zhang, H. & Jiang, X., 15 Jan 2018, In : Optics Communications. 407, p. 367-374 8 p.

Research output: Contribution to journalArticle

9 Citations (Scopus)

Resolution enhancement for topography measurement of high-dynamic-range surfaces via image fusion

Wang, J., Su, R., Leach, R., Lu, W., Zhou, L. & Jiang, X., 24 Dec 2018, In : Optics Express. 26, 26, p. 34805-34819 15 p.

Research output: Contribution to journalArticle

Open Access
6 Citations (Scopus)

Technical note: Comparison of metal-on-metal hip simulator wear measured by gravimetric, CMM and optical profiling methods

Alberts, L. R., Martinez-Nogues, V., Baker Cook, R., Maul, C., Bills, P., Racasan, R., Stolz, M. & Wood, R., 29 Jan 2018, In : Surface Topography: Metrology and Properties. 6, 1, p. 1-8 8 p., 014002.

Research output: Contribution to journalArticle

Open Access
File

The Impact of Alkaliphilic Biofilm Formation on the Release and Retention of Carbon Isotopes from Nuclear Reactor Graphite

Rout, S., Payne, L., Walker, S., Scott, T., Heard, P., Eccles, H., Bond, G., Shah, P., Bills, P., Jackson, B. R., Boxall, S. A., Laws, A., Charles, C., Williams, S. J. & Humphreys, P., 13 Mar 2018, In : Scientific Reports. 8, 1, 9 p., 4455.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

The influence of cutting parameters on the defect structure of subsurface in orthogonal cutting of titanium alloy

Bai, J., Bai, Q., Tong, Z. & Chen, G., 28 Mar 2018, In : Journal of Materials Research. 33, 6, p. 720-732 13 p.

Research output: Contribution to journalArticle

Open Access
File
2 Citations (Scopus)

Theoretical and Experimental Investigation of Surface Topography Generation in Slow Tool Servo Ultra-Precision Machining of Freeform Surfaces

Li, D., Qiao, Z., Walton, K., Liu, Y., Xue, J., Wang, B. & Jiang, X., 17 Dec 2018, In : Materials. 11, 12, p. 1-21 21 p., 2566.

Research output: Contribution to journalArticle

Open Access
4 Citations (Scopus)