Centre for Precision Technologies

Research Output

2017

Influence of surface topography on torsional fretting wear under flat-on-flat contact

Lu, W., Zhang, P., Liu, X., Zhai, W., Zhou, M., Luo, J., Zeng, W. & Jiang, X., 1 May 2017, In : Tribology International. 109, p. 367-372 6 p.

Research output: Contribution to journalArticle

Open Access
28 Citations (Scopus)

Insight into aspheric misfit with hard tools: Mapping the island of low mid-spatial frequencies

Walker, D., Hsing-Yu, W., Yu, G., Li, H., Zhang, W. & Lu, C., 13 Dec 2017, In : Applied Optics. 56, 36, p. 9925-9931 7 p.

Research output: Contribution to journalArticle

Open Access
File
7 Citations (Scopus)

Interferometry for Online/In-Process Surface Inspection

Gao, F., 15 Feb 2017, Optical Interferometry. Banishev, A. A., Bhowmick, M. & Wang, J. (eds.). InTech, p. 41-59 18 p. Chapter 3

Research output: Chapter in Book/Report/Conference proceedingChapter

Open Access
5 Citations (Scopus)

Machine Acceleration Effects on Computer Controlled Polishing

Faehnle, O., Reynolds, C., Yu, G. & Walker, D., 1 Aug 2017, Optical Fabrication and Testing Conference Proceedings 2017. OSA - The Optical Society, 3 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Method for Volumetric Assessment of Edge-Wear in Ceramic-on-Ceramic Acetabular Liners

Kapadia, D., Racasan, R., Pagani, L., Al-Hajjar, M. & Bills, P., 15 Apr 2017, In : Wear. 376-377, A, p. 236-242 7 p.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

Metrology Education Impediment in Developing Countries Considering the Case of Nigeria

Ibrahim, S., Bills, P. & Allport, J., 26 Jun 2017, Canada International Conference on Education (CICE-2017). Shoniregun, C. A. & Akmayeva, G. A. (eds.). p. 471-475 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Modelling Uncertainty Associated with Comparative Coordinate Measurement through Analysis of Variance Techniques

Papananias, M., Fletcher, S., Longstaff, A., Mengot, A., Jonas, K. & Forbes, A. B., Jun 2017, Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017. euspen, p. 407-408 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

More steps towards process automation for optical fabrication

Walker, D., Yu, G., Beaucamp, A., Bibby, M., Li, H., McCluskey, L., Petrovic, S. & Reynolds, C., 15 Jun 2017, Fourth European Seminar on Precision Optics Manufacturing. Fähnle, O. W., Rascher, R. & Wünsche, C. (eds.). SPIE, Vol. 10326. 8 p. 103260S. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10326).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Multiscale analyses of surface failure mechanism of single-crystal silicon during micro-milling process

Bai, J., Bai, Q. & Tong, Z., 13 Dec 2017, In : Materials. 10, 12, 14 p., 1424.

Research output: Contribution to journalArticle

Open Access
4 Citations (Scopus)

Non-Overlap Subaperture Interferometric Testing for Large Optics

Wu, X., Yu, Y., Zeng, W., Qi, T., Chen, M. & Jiang, X., 1 Aug 2017, In : Optics Communications. 396, p. 191-198 8 p.

Research output: Contribution to journalArticle

Open Access

On the Exploitation of Automated Planning for Reducing Machine Tools Energy Consumption Between Manufacturing Operations

Parkinson, S., Longstaff, A., Fletcher, S., Vallati, M. & Chrpa, L., 2017, 27th International Conference on Automated Planning and Scheduling: (ICAPS 2017). Barbulescu, L., Frank, J., M. & Smith, S. F. (eds.). Association for the Advancement of Artificial Intelligence, 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
1 Citation (Scopus)

On the Geometrical Accuracy of High Aspect Ratio Micromilled Pins

Parenti, P., Pagani, L., Annoni, M., Maria Colosimo, B. & Semeraro, Q., 1 May 2017, In : Journal of Manufacturing Science and Engineering, Transactions of the ASME. 139, 5, 051002.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Research on edge-control methods in CNC polishing

Yu, G., Walker, D., Li, H., Zheng, X. & Beaucamp, A., 16 Sep 2017, In : Journal of the European Optical Society. 13, 13 p., 24.

Research output: Contribution to journalArticle

Open Access
3 Citations (Scopus)

Results from an interlaboratory comparison of areal surface texture parameter extraction from X-ray computed tomography of additively manufactured parts

Townsend, A., Racasan, R., Bills, P., Thompson, A., Senin, N., Leach, R. & Blunt, L., 26 May 2017, Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017. Phillips, D. (ed.). euspen, p. 385-386 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
1 Citation (Scopus)

Simultaneous Multi-Type Feature Separation for Complex Structured Surface

Zeng, W., Lou, S., Abdul-Rahman, H. S., Jiang, X. & Scott, P., 15 Mar 2017, Laser Metrology and Machine Performance XII - 12th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2017. euspen, Vol. 2017-January. p. 222-231 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Study of weighted fusion methods for the measurement of surface geometry

Wang, J., Pagani, L., Leach, R. K., Zeng, W., Colosimo, B. M. & Zhou, L., Jan 2017, In : Precision Engineering. 47, p. 111-121 11 p.

Research output: Contribution to journalArticle

16 Citations (Scopus)
Open Access

The influence of hydroalcoholic media on the performance of Grewia polysaccharide in sustained release tablets

Nep, E. I., Mahdi, M., Adebisi, A., Dawson, C., Walton, K., Bills, P., Conway, B., Smith, A. & Asare-Addo, K., 30 Oct 2017, In : International Journal of Pharmaceutics. 532, 1, p. 352-364 13 p.

Research output: Contribution to journalArticle

Open Access
6 Citations (Scopus)

The 'Multimat' Experiment at CERN HiRadMat Facility: Advanced Testing of Novel Materials and Instrumentation for HL-LHC Collimators

Carra, F., Bertarelli, A., Berthomé, E., Fichera, C., Furness, T., Guinchard, M., Mettler, L. K., Portelli, M., Redaelli, S. & Sacristan de Frutos, O., 20 Jul 2017, In : Journal of Physics: Conference Series. 874, 7 p., 012001.

Research output: Contribution to journalArticle

Open Access
4 Citations (Scopus)

Three-Dimensional Shape Measurements of Specular Objects Using Phase-Measuring Deflectometry

Zhang, Z., Wang, Y., Huang, S., Liu, Y., Chang, C., Gao, F. & Jiang, X., 7 Dec 2017, In : Sensors. 17, 12, p. 2835 26 p.

Research output: Contribution to journalArticle

Open Access
20 Citations (Scopus)

Torsional fretting wear behavior of CuNiAl against 42CrMo4 under flat on flat contact

Zhang, P., Lu, W., Liu, X., Zhou, M., Zhai, W., Zhang, G., Zeng, W. & Jiang, X. J., 15 Jun 2017, In : Wear. 380-381, p. 6-14 9 p.

Research output: Contribution to journalArticle

16 Citations (Scopus)
Open Access
15 Citations (Scopus)
Open Access
3 Citations (Scopus)
Open Access
7 Citations (Scopus)

Virtual fringe projection system with nonparallel illumination based on iteration

Zhou, D., Wang, Z., Gao, N., Zhang, Z. & Jiang, X., 11 Apr 2017, In : Measurement Science and Technology. 28, 6, p. 1-9 9 p., 065201.

Research output: Contribution to journalArticle

2 Citations (Scopus)
2016

A Hierarchical Category Model for Geometrical Product Specifications (GPS)

Qi, Q., Scott, P. J., Jiang, X. & Lu, W., 2016, In : Procedia CIRP. 43, p. 214-219 6 p.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

A key point method for data registration for MultiSensor fusion

Zeng, W., Jiang, X., Lou, S. & Scott, P., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen, p. 69-70 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

An atomistic investigation of the effect of strain on frictional properties of suspended graphene

Bai, Q., He, X., Bai, J. & Tong, Z., May 2016, In : AIP Advances. 6, 5, p. 1-9 9 p., 055308.

Research output: Contribution to journalArticle

Open Access
8 Citations (Scopus)

A new strategy for improving vision based tracking accuracy based on utilization of camera calibration information

Alzarok, H., Fletcher, S. & Longstaff, A. P., 24 Oct 2016, 22nd International Conference on Automation and Computing: ICAC 2016: Tackling the New Challenges in Automation and Computing. Institute of Electrical and Electronics Engineers Inc., p. 278-283 6 p. 7604932

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
4 Citations (Scopus)

A novel camera calibration method for deflectometry system

Gao, F., Xu, Y., Ren, H., Zhang, Z. & Jiang, X., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A novel method based on Bayesian regularized artificial neural networks for measurement uncertainty evaluation

Papananias, M., Fletcher, S., Longstaff, A. & Mengot, A., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen, 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
2 Citations (Scopus)

Areal surface texture parameters on surface

Pagani, L. & Scott, P. J., 2016, Proceedings - ASPE/euspen 2016 Summer Topical Meeting: Dimensional Accuracy and Surface Finish in Additive Manufacturing. American Society for Precision Engineering, ASPE, p. 162-167 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

A Sampling Strategy Based on B-wavelets Decomposition

Pagani, L. & Scott, P. J., 2016, In : Procedia CIRP. 43, p. 29-34 6 p.

Research output: Contribution to journalArticle

Open Access
4 Citations (Scopus)

Atomistic investigation of the wear of nanoscale diamond cutting tools shaped by focused ion beam

Tong, Z., Jiang, X., Bai, Q., Blunt, L. & Luo, X., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
Open Access
1 Citation (Scopus)

Closing the metrology/process loop in CNC polishing

Walker, D. D., Yu, G., Bibby, M., Li, H. & Dunn, C. R., 30 Jun 2016, Third European Seminar on Precision Optics Manufacturing. Rascher, R., Fähnle, O., Wünsche, C. & Schopf, C. (eds.). SPIE, Vol. 10009. 5 p. 100090O. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10009).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Comparison of different additive manufacturing methods using computed tomography

Shah, P., Racasan, R. & Bills, P., 1 Nov 2016, In : Case Studies in Nondestructive Testing and Evaluation. 6, B, p. 69-78 10 p.

Research output: Contribution to journalArticle

Open Access
29 Citations (Scopus)

Design of Deformable Tools for Sheet Metal Forming

Iorio, L., Pagani, L., Strano, M. & Monno, M., 1 Sep 2016, In : Journal of Manufacturing Science and Engineering, Transactions of the ASME. 138, 9, 094701.

Research output: Contribution to journalReview article

1 Citation (Scopus)

Development of Swinging Part Profilometer for Optics

Zhang, P., Li, J., Yu, G. & Walker, D., 11 Nov 2016, Optics and Measurement International Conference 2016. Kovacicinova, J. (ed.). SPIE, Vol. 10151. 8 p. 101510B. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10151).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
3 Citations (Scopus)

Development of ultra-precision abrasive machining of functional structured surfaces

Young, C., Blunt, L., Mohamed, Z. & Tong, Z., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen, 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Developments in automated flexible gauging and the uncertainty associated with comparative coordinate measurement

Forbes, A., Papananias, M., Longstaff, A., Fletcher, S., Mengot, A. & Jonas, K., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen, 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
4 Citations (Scopus)

Evaluating the Trezzo range of static foam surfaces: results of a comparative study

Ousey, K., Stephenson, J. & Fleming, L., 9 Nov 2016, In : Wounds UK. 12, 4, p. 66-73 8 p.

Research output: Contribution to journalArticle

Open Access

Evolution of surface grain structure and mechanical properties in orthogonal cutting of titanium alloy

Bai, J., Bai, Q., Tong, Z., Hu, C. & He, X., 28 Dec 2016, In : Journal of Materials Research. 31, 24, p. 3919-3929 11 p.

Research output: Contribution to journalArticle

Open Access
7 Citations (Scopus)
Open Access
6 Citations (Scopus)

Full-Field 3D Shape Measurement of Specular Surfaces by Direct Phase to Depth Relationship

Zhang, Z., Liu, Y., Huang, S., Niu, Z., Guo, J., Gao, N., Gao, F. & Jiang, X., 24 Nov 2016, Optical Metrology and Inspection for Industrial Applications IV. Han, S., Yoshizawa, T. & Zhang, S. (eds.). SPIE, Vol. 10023. 11 p. 100230X. (Proceedings of SPIE; vol. 10023).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

14 Citations (Scopus)

Full-field calibration and compensation of lateral chromatic aberration based on unwrapped phase

Liu, X., Huang, S., Zhang, Z., Gao, F. & Jiang, X., 31 Oct 2016, Optical Design and Testing VII. Wang, Y., Kidger, T. E. & Tatsuno, K. (eds.). SPIE, Vol. 10021. 9 p. 1002119. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10021).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

High fidelity replication of surface texture and geometric form of a high aspect ratio aerodynamic test component

Walton, K., Fleming, L., Goodhand, M. N., Racasan, R. & Zeng, W., 2 Apr 2016, In : Surface Topography: Metrology and Properties. 4, 2, 12 p., 025003.

Research output: Contribution to journalArticle

Open Access
5 Citations (Scopus)

High resolution position measurement from dispersed reference interferometry using template matching

Williamson, J., Martin, H. & Jiang, X., 2 May 2016, In : Optics Express. 24, 9, p. 10103-10114 12 p.

Research output: Contribution to journalArticle

Open Access
11 Citations (Scopus)

Implementation of line-scan dispersive interferometry for defect detection

Tang, D., Gao, F. & Jiang, X., 2016, Proceedings of the 16th International Conference and 18th General Meeting of the European Society for Precision Engineering and Nanotechnology: EUSPEN 2016. Leach, R. (ed.). euspen, 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Influence of supramolecular forces on the linear viscoelasticity of gluten

Kontogiorgos, V., Shah, P. & Bills, P., 1 Mar 2016, In : Rheologica Acta. 55, 3, p. 187-195 9 p.

Research output: Contribution to journalArticle

Open Access
8 Citations (Scopus)