Centre for Precision Technologies

Research Output

2017
Open Access
20 Citations (Scopus)
Open Access
3 Citations (Scopus)
Open Access
9 Citations (Scopus)

Virtual fringe projection system with nonparallel illumination based on iteration

Zhou, D., Wang, Z., Gao, N., Zhang, Z. & Jiang, X., 11 Apr 2017, In : Measurement Science and Technology. 28, 6, p. 1-9 9 p., 065201.

Research output: Contribution to journalArticle

3 Citations (Scopus)
2016

A Hierarchical Category Model for Geometrical Product Specifications (GPS)

Qi, Q., Scott, P. J., Jiang, X. & Lu, W., 2016, In : Procedia CIRP. 43, p. 214-219 6 p.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

A key point method for data registration for MultiSensor fusion

Zeng, W., Jiang, X., Lou, S. & Scott, P., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen, p. 69-70 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

An atomistic investigation of the effect of strain on frictional properties of suspended graphene

Bai, Q., He, X., Bai, J. & Tong, Z., May 2016, In : AIP Advances. 6, 5, p. 1-9 9 p., 055308.

Research output: Contribution to journalArticle

Open Access
8 Citations (Scopus)

A new strategy for improving vision based tracking accuracy based on utilization of camera calibration information

Alzarok, H., Fletcher, S. & Longstaff, A. P., 24 Oct 2016, 22nd International Conference on Automation and Computing: ICAC 2016: Tackling the New Challenges in Automation and Computing. Institute of Electrical and Electronics Engineers Inc., p. 278-283 6 p. 7604932

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
4 Citations (Scopus)

A novel camera calibration method for deflectometry system

Gao, F., Xu, Y., Ren, H., Zhang, Z. & Jiang, X., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A novel method based on Bayesian regularized artificial neural networks for measurement uncertainty evaluation

Papananias, M., Fletcher, S., Longstaff, A. & Mengot, A., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen, 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
2 Citations (Scopus)

Areal surface texture parameters on surface

Pagani, L. & Scott, P. J., 2016, Proceedings - ASPE/euspen 2016 Summer Topical Meeting: Dimensional Accuracy and Surface Finish in Additive Manufacturing. American Society for Precision Engineering, ASPE, p. 162-167 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

A Sampling Strategy Based on B-wavelets Decomposition

Pagani, L. & Scott, P. J., 2016, In : Procedia CIRP. 43, p. 29-34 6 p.

Research output: Contribution to journalArticle

Open Access
4 Citations (Scopus)

Atomistic investigation of the wear of nanoscale diamond cutting tools shaped by focused ion beam

Tong, Z., Jiang, X., Bai, Q., Blunt, L. & Luo, X., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
Open Access
1 Citation (Scopus)

Closing the metrology/process loop in CNC polishing

Walker, D. D., Yu, G., Bibby, M., Li, H. & Dunn, C. R., 30 Jun 2016, Third European Seminar on Precision Optics Manufacturing. Rascher, R., Fähnle, O., Wünsche, C. & Schopf, C. (eds.). SPIE, Vol. 10009. 5 p. 100090O. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10009).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Comparison of different additive manufacturing methods using computed tomography

Shah, P., Racasan, R. & Bills, P., 1 Nov 2016, In : Case Studies in Nondestructive Testing and Evaluation. 6, B, p. 69-78 10 p.

Research output: Contribution to journalArticle

Open Access
34 Citations (Scopus)

Design of Deformable Tools for Sheet Metal Forming

Iorio, L., Pagani, L., Strano, M. & Monno, M., 1 Sep 2016, In : Journal of Manufacturing Science and Engineering, Transactions of the ASME. 138, 9, 094701.

Research output: Contribution to journalReview article

1 Citation (Scopus)

Development of Swinging Part Profilometer for Optics

Zhang, P., Li, J., Yu, G. & Walker, D., 11 Nov 2016, Optics and Measurement International Conference 2016. Kovacicinova, J. (ed.). SPIE, Vol. 10151. 8 p. 101510B. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10151).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
3 Citations (Scopus)

Development of ultra-precision abrasive machining of functional structured surfaces

Young, C., Blunt, L., Mohamed, Z. & Tong, Z., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen, 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Developments in automated flexible gauging and the uncertainty associated with comparative coordinate measurement

Forbes, A., Papananias, M., Longstaff, A., Fletcher, S., Mengot, A. & Jonas, K., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen, 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
4 Citations (Scopus)

Evaluating the Trezzo range of static foam surfaces: results of a comparative study

Ousey, K., Stephenson, J. & Fleming, L., 9 Nov 2016, In : Wounds UK. 12, 4, p. 66-73 8 p.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

Evolution of surface grain structure and mechanical properties in orthogonal cutting of titanium alloy

Bai, J., Bai, Q., Tong, Z., Hu, C. & He, X., 28 Dec 2016, In : Journal of Materials Research. 31, 24, p. 3919-3929 11 p.

Research output: Contribution to journalArticle

Open Access
8 Citations (Scopus)
Open Access
6 Citations (Scopus)

Full-Field 3D Shape Measurement of Specular Surfaces by Direct Phase to Depth Relationship

Zhang, Z., Liu, Y., Huang, S., Niu, Z., Guo, J., Gao, N., Gao, F. & Jiang, X., 24 Nov 2016, Optical Metrology and Inspection for Industrial Applications IV. Han, S., Yoshizawa, T. & Zhang, S. (eds.). SPIE, Vol. 10023. 11 p. 100230X. (Proceedings of SPIE; vol. 10023).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

15 Citations (Scopus)

Full-field calibration and compensation of lateral chromatic aberration based on unwrapped phase

Liu, X., Huang, S., Zhang, Z., Gao, F. & Jiang, X., 31 Oct 2016, Optical Design and Testing VII. Wang, Y., Kidger, T. E. & Tatsuno, K. (eds.). SPIE, Vol. 10021. 9 p. 1002119. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10021).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
Open Access
5 Citations (Scopus)

High resolution position measurement from dispersed reference interferometry using template matching

Williamson, J., Martin, H. & Jiang, X., 2 May 2016, In : Optics Express. 24, 9, p. 10103-10114 12 p.

Research output: Contribution to journalArticle

Open Access
12 Citations (Scopus)

Implementation of line-scan dispersive interferometry for defect detection

Tang, D., Gao, F. & Jiang, X., 2016, Proceedings of the 16th International Conference and 18th General Meeting of the European Society for Precision Engineering and Nanotechnology: EUSPEN 2016. Leach, R. (ed.). euspen, 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Influence of supramolecular forces on the linear viscoelasticity of gluten

Kontogiorgos, V., Shah, P. & Bills, P., 1 Mar 2016, In : Rheologica Acta. 55, 3, p. 187-195 9 p.

Research output: Contribution to journalArticle

Open Access
8 Citations (Scopus)

Investigating the capability of microfocus x-ray computed tomography for areal surface analysis of additively manufactured parts

Townsend, A., Blunt, L. & Bills, P., 2016, Proceedings - ASPE/euspen 2016 Summer Topical Meeting: Dimensional Accuracy and Surface Finish in Additive Manufacturing. American Society for Precision Engineering, ASPE, p. 206-210 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
2 Citations (Scopus)

Least-squares method for data reconstruction from gradient data in deflectometry

Ren, H., Gao, F. & Jiang, X., 1 Aug 2016, In : Applied Optics. 55, 22, p. 6052-6059 8 p.

Research output: Contribution to journalArticle

Open Access
18 Citations (Scopus)

Meso-scale Modeling of the Drilling of Carbon Fibre Reinforced Plastic: Geometry and Numerical Analysis

Al-wandi, S., Pan, W., Ding, S. & P.t. Mo, J., 30 Aug 2016, In : Universal Journal of Mechanical Engineering. 4, 4, p. 75-82 8 p.

Research output: Contribution to journalArticle

Open Access

On characterising surface topography of metal powder bed fusion additive manufactured parts

Lou, S., Townsend, A., Jiang, X., Blunt, L., Zeng, W. & Scott, P., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen, 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
4 Citations (Scopus)

Optimisation of Grolishing Freeform Surfaces with Rigid and Semi-rigid Tools

Yu, G., Wu, H. Y., Walker, D., Zheng, X., Li, H., Dunn, C. & Gray, C., 22 Jul 2016, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation II. Navarro, R. & Burge, J. H. (eds.). SPIE, Vol. 9912. 6 p. 99123Q. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 9912).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)
Open Access
14 Citations (Scopus)

Phase and fringe order determination in wavelength scanning interferometry

Moschetti, G., Forbes, A. B., Leach, R. K., Jiang, X. & O'Connor, D., 15 Apr 2016, In : Optics Express. 24, 8, p. 8997-9012 16 p.

Research output: Contribution to journalArticle

Open Access
10 Citations (Scopus)

Quadrature Wavelength Scanning Interferometry

Moschetti, G., Forbes, A., Leach, R. K., Jiang, X. & O'Connor, D., 6 Jul 2016, In : Applied Optics. 55, 20, p. 5332-5340 9 p.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

Review on FIB-induced damage in diamond materials

Tong, Z., Jiang, X., Luo, X., Bai, Q., Xu, Z., Blunt, L. & Liang, Y., 1 Dec 2016, In : Current Nanoscience. 12, 6, p. 685-695 11 p.

Research output: Contribution to journalReview article

1 Citation (Scopus)

Robotic automation in computer controlled polishing

Walker, D. D., Yu, G., Bibby, M., Dunn, C., Li, H., Wu, H. Y., Zheng, X. & Zhang, P., 6 Feb 2016, In : Journal of the European Optical Society. 11, 7 p., 16005.

Research output: Contribution to journalArticle

Open Access
11 Citations (Scopus)

Selecting a semantic similarity measure for concepts in two different CAD model data ontologies

Lu, W., Qin, Y., Qi, Q., Zeng, W., Zhong, Y., Liu, X. & Jiang, X., Aug 2016, In : Advanced Engineering Informatics. 30, 3, p. 449-466 18 p.

Research output: Contribution to journalArticle

Open Access
14 Citations (Scopus)

Simulation study of a refined approach for specular surfaces reconstruction in deflectometry

Gao, F., Ren, H. & Jiang, X., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, (EUSPEN), (University of Nottingham; 30 May - 3 June 2016). euspen, 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Special Issue Collection on Additive Manufacturing

Blunt, L. & Tuck, C., 9 May 2016, In : Surface Topography: Metrology and Properties. 4, 2, 020201.

Research output: Contribution to journalEditorial

Open Access
2 Citations (Scopus)
15 Citations (Scopus)

Surface texture metrology for metal additive manufacturing: a review

Townsend, A., Senin, N., Blunt, L., Leach, R. K. & Taylor, J. S., 1 Oct 2016, In : Precision Engineering. 46, p. 34-47 14 p.

Research output: Contribution to journalReview article

Open Access
216 Citations (Scopus)

The application of 3D-motif analysis to characterize diamond grinding wheel topography

Ye, R., Jiang, X., Blunt, L., Cui, C. & Yu, Q., Jan 2016, In : Measurement: Journal of the International Measurement Confederation. 77, p. 73-79 7 p.

Research output: Contribution to journalArticle

15 Citations (Scopus)

The Limitations of using "ra" to describe surface roughness

Goodhand, M. N., Walton, K., Blunt, L., Lung, H. W., Miller, R. J. & Marsden, R., 26 Apr 2016, In : Journal of Turbomachinery. 138, 10, 8 p., 101003.

Research output: Contribution to journalArticle

14 Citations (Scopus)
Open Access

Thermal error modelling of a gantry-type 5-axis machine tool using a Grey Neural Network Model

Abdulshahed, A. M., Longstaff, A. P., Fletcher, S. & Potdar, A., Oct 2016, In : Journal of Manufacturing Systems. 41, p. 130-142 13 p.

Research output: Contribution to journalArticle

Open Access
23 Citations (Scopus)

The ultra-precision cutting Titanium alloy (Ti-6Al-4V): Effects on its microstructure and surface mechanical properties

Bai, J., Bai, Q., He, X. & Tong, Z., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)