Centre for Precision Technologies

Research Output

2016

Thermal error modelling of a gantry-type 5-axis machine tool using a Grey Neural Network Model

Abdulshahed, A. M., Longstaff, A. P., Fletcher, S. & Potdar, A., Oct 2016, In : Journal of Manufacturing Systems. 41, p. 130-142 13 p.

Research output: Contribution to journalArticle

Open Access
23 Citations (Scopus)

The ultra-precision cutting Titanium alloy (Ti-6Al-4V): Effects on its microstructure and surface mechanical properties

Bai, J., Bai, Q., He, X. & Tong, Z., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
Open Access
3 Citations (Scopus)
2015

Accurate projector calibration method by using an optical coaxial camera

Huang, S., Xie, L., Wang, Z., Zhang, Z., Gao, F. & Jiang, X., 2015, In : Applied Optics. 54, 4, p. 789-795 7 p.

Research output: Contribution to journalArticle

28 Citations (Scopus)

A computerised data handling procedure for defect detection and analysis for large area substrates manufactured by roll-to-roll process

Muhamedsalih, H., Elrawemi, M., Blunt, L., Lan, X. & Martin, H., 2015, Laser Metrology and Machine Performance XI - 11th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2015. euspen, p. 82-89 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A correlational study of areal surface texture parameters on some typical machined surfaces

Qi, Q., Li, T., Scott, P. J. & Jiang, X., 2015, 13th CIRP Conference on Computer Aided Tolerancing. Elsevier, Vol. 27. p. 149-154 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
10 Citations (Scopus)

A criterion for comparing measurement results and determining conformity with specifications

Ding, H., Scott, P. J. & Jiang, X., 2015, 13th CIRP Conference on Computer Aided Tolerancing. Elsevier, Vol. 27. p. 143-148 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
2 Citations (Scopus)

An ANOVA method of evaluating the specification uncertainty in roughness measurement

Ding, H., Qi, Q., Scott, P. J. & Jiang, X., 2015, Laser Metrology and Machine Performance XI - 11th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2015. euspen, p. 116-125 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

An integrated opto-mechanical measurement system for in-process defect measurement on a roll-to-roll process

Muhamedsalih, H., Blunt, L., Martin, H., Hamersma, I., Elrawemi, M. & Gao, F., 2015, Laser Metrology and Machine Performance XI - 11th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2015. euspen, p. 97-105 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

An Investigation of factors affecting and optimizing material removal rate in computer controlled ultra-precision polishing

Ho, L. T., Cheung, C. F., Blunt, L. & Zeng, S., 2015, Precision Engineering and Nanotechnology V. Trans Tech Publications Ltd, Vol. 625. p. 446-452 7 p. (Key Engineering Materials; vol. 625).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A novel surface temperature measurement system for industrial applications

Tansley, D., Fletcher, S. & Longstaff, A., 2015, Laser Metrology and Machine Performance XI - 11th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2015. euspen, p. 51-60 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

A particle swarm optimisation-based grey prediction model for thermal error compensation on CNC machine tools

Abdulshahed, A. M., Longstaff, A. P. & Fletcher, S., 2015, Laser Metrology and Machine Performance XI - 11th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2015. euspen, p. 363-372 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
2 Citations (Scopus)

Application of multi sensor data fusion based on principal component analysis and artificial neural network for machine tool thermal monitoring

Potdar, A. A., Longstaff, A. P., Fletcher, S. & Mian, N. S., 2015, Laser Metrology and Machine Performance XI - 11th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2015. euspen, p. 224-233 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
3 Citations (Scopus)

A single-shot line-scanning spatially dispersed short coherence interferometer using Fourier transform profilometry

Hassan, M., Martin, H. & Jiang, X., 2015, Laser Metrology and Machine Performance XI - 11th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2015. euspen, p. 2-7 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
7 Citations (Scopus)
2 Citations (Scopus)

Calibration and verification of areal surface texture measuring instruments

Leach, R. K., Giusca, C. L., Haitjema, H., Evans, C. & Jiang, X., 2015, In : CIRP Annals - Manufacturing Technology. 64, 2, p. 797-813 17 p.

Research output: Contribution to journalArticle

54 Citations (Scopus)

Computer numerical control vertical machining centre feed drive modelling using the transmission line technique

Ford, D. G., Castaneda, V. Y. M., Longstaff, A. P., Pislaru, C. & Myers, A., 8 Jun 2015, In : Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 229, 9, p. 1578-1599 22 p.

Research output: Contribution to journalArticle

Open Access
3 Citations (Scopus)

Construct surface characterization system by assembling functional components dynamically

Lan, X., Jiang, X., Zeng, W. & Blunt, L., 2015, 13th CIRP Conference on Computer Aided Tolerancing. Elsevier, Vol. 27. p. 198-201 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Derivation of a cost model to aid management of CNC machine tool accuracy maintenance

Shagluf, A., Longstaff, A. & Fletcher, S., 2015, In : Journal of Machine Engineering. 15, 2, p. 17-43 27 p.

Research output: Contribution to journalArticle

Open Access

Description logic-based automatic generation of geometric tolerance zones

Qin, Y., Lu, W., Liu, X., Huang, M., Zhou, L. & Jiang, X., 3 Jul 2015, In : International Journal of Advanced Manufacturing Technology. 79, 5-8, p. 1221-1237 17 p.

Research output: Contribution to journalArticle

19 Citations (Scopus)

Detailed inspection of metal implants

Hothi, H. S., Berber, R., Whittaker, R. K., Bills, P. J., Skinner, J. A. & Hart, A. J., 1 May 2015, In : HIP International. 25, 3, p. 227-231 5 p.

Research output: Contribution to journalArticle

9 Citations (Scopus)

Effect of Ag thin films on the photoluminescence of ZnO films

Han, F., Yang, S., Jing, W., Wang, L., Li, L., Jiang, Z. & Gao, F., 1 May 2015, In : Journal of Nanoscience and Nanotechnology. 15, 5, p. 3796-3801 6 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Enhanced in-line detection cleaning and repair of nano-scale defects in thin-films used for flexible photovoltaic and food packaging applications

Blunt, L. & Bagshaw, S., 13 May 2015, 15th TAPPI European PLACE Conference 2015. TAPPI Press, Vol. 2015-May. p. 458 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Enriching the semantics of variational geometric constraint data with ontology

Lu, W., Qin, Y., Liu, X., Huang, M., Zhou, L. & Jiang, X., 2015, In : CAD Computer Aided Design. 63, p. 72-85 14 p.

Research output: Contribution to journalArticle

29 Citations (Scopus)

Evaluation of MEMS structures with directional characteristics based on FRAT and lifting wavelet

Lu, W., Yu, N., Zou, X., Liu, X., Zhou, L. & Li, T., 2015, 13th CIRP Conference on Computer Aided Tolerancing. Elsevier, Vol. 27. p. 298-302 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
2 Citations (Scopus)

Extending the vertical range of wavelength scanning interferometry

Moschetti, G., Muhamedsalih, H., Jiang, X., Leach, R. K. & O'Connor, D., 2015, Proceedings - ASPE 2015 Summer Topical Meeting: Precision Interferometric Metrology. American Society for Precision Engineering, ASPE, p. 50-55 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

FEA-based design study for optimising non-rigid error detection on machine tools

Mian, N. S., Fletcher, S., Longstaff, A. P. & Myers, A., 2015, Laser Metrology and Machine Performance XI - 11th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2015. euspen, p. 254-263 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
1 Citation (Scopus)

Fundaments of measurement for testing software in computationally-intensive metrology

Scott, P. J., 2015, Laser Metrology and Machine Performance XI - 11th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2015. euspen, p. 18-24 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
Open Access
8 Citations (Scopus)

Implementation of wavelength scanning interferometry for R2R flexible PV barrier films

Blunt, L., Muhamedsalih, H., Elrawemi, M., Martin, H., Hamersma, I., Gao, F. & Jiang, X., 2015, Proceedings of the 15th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2015. euspen, p. 199-200 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Improvement of high-order least-squares integration method for stereo deflectometry

Ren, H., Gao, F. & Jiang, X., 30 Nov 2015, In : Applied Optics. 54, 34, p. 10249-10255 7 p.

Research output: Contribution to journalArticle

17 Citations (Scopus)

In-situ defect detection systems for R2R flexible PV barrier films

Gao, F., Muhamedsalih, H., Tang, D., Elrawemi, M., Blunt, L., Jiang, X., Edge, S., Bird, D. & Hollis, P., 2015, Proceedings - ASPE 2015 Summer Topical Meeting: Precision Interferometric Metrology. American Society for Precision Engineering, ASPE, p. 44-49 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

In-situ defect detection systems for R2R flexible PV barrier films

Gao, F., Muhamedsalih, H., Tang, D., Elrawemi, M., Blunt, L., Jiang, X., Edge, S., Bird, D. & Hollis, P., 5 Aug 2015, 2015 International Conference on Optical Instruments and Technology: Optoelectronic Imaging and Processing Technology. Shi, G., Li, X. & Huang, B. (eds.). SPIE, Vol. 9622. 9 p. 96220E. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 9622).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Investigation of a new method for improving image resolution for camera tracking applications

Alzarok, H., Fletcher, S., Longstaff, A. & Myers, A., 17 Mar 2015, Laser Metrology and Machine Performance XI - 11th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2015. Blunt, L. & Hansen, H. N. (eds.). euspen, p. 40-50 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Investigation of a scale-up manufacturing approach for nanostructures by using a nanoscale multi-tip diamond tool

Tong, Z., Luo, X., Sun, J., Liang, Y. & Jiang, X., 3 Apr 2015, In : International Journal of Advanced Manufacturing Technology. 80, 1-4, p. 699-710 12 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)

Iterative optimization calibration method for stereo deflectometry

Ren, H., Gao, F. & Jiang, X., 24 Aug 2015, In : Optics Express. 23, 17, p. 2260-22068 19809 p.

Research output: Contribution to journalArticle

Open Access
37 Citations (Scopus)

Key research on computer aided tolerancing

Cao, Y. L., Mathieu, L. & Jiang, J., 1 May 2015, In : Journal of Zhejiang University: Science A. 16, 5, p. 335-340 6 p.

Research output: Contribution to journalEditorial

9 Citations (Scopus)

Machine structure simulation using FEA and optimised thermal parameters

Abuaniza, A., Fletcher, S., Mian, N. S. & Longstaff, A. P., 2015, Laser Metrology and Machine Performance XI - 11th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2015. euspen, p. 335-344 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Measures of improvement MUVoT, a Blended Learning course on the topic of measurement uncertainty for advanced vocational training

Gröschl, A., Götz, J., Loderer, A., Bills, P. & Hausotte, T., 2015, 13th CIRP Conference on Computer Aided Tolerancing. Elsevier, Vol. 27. p. 111-116 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Method for characterization of material loss from modular head-stem taper surfaces of hip replacement devices

Racasan, R., Bills, P., Blunt, L., Hart, A. & Skinner, J. A., 1 Jan 2015, In : ASTM Special Technical Publication. STP 1591, p. 132-146 15 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Metrology of Al2O3 Barrier Film for Flexible CIGS Solar Cells

Elrawemi, M., Blunt, L., Fleming, L., Sweeney, F., Robbins, D. & Bird, D., 1 Oct 2015, In : International Journal of Energy Optimization and Engineering. 4, 4, 15 p.

Research output: Contribution to journalArticle

10 Citations (Scopus)

Multi-objective optimisation of machine tool error mapping using automated planning

Parkinson, S. & Longstaff, A. P., 15 Apr 2015, In : Expert Systems with Applications. 42, 6, p. 3005-3015 11 p.

Research output: Contribution to journalArticle

Open Access
5 Citations (Scopus)

Novel end-fly-cutting-servo system for deterministic generation of hierarchical micro-nanostructures

To, S., Zhu, Z. & Zeng, W., 2015, In : CIRP Annals - Manufacturing Technology. 64, 1, p. 133-136 4 p.

Research output: Contribution to journalArticle

12 Citations (Scopus)

Ontology-based semantic interpretation of cylindricity specification in the next-generation GPS

Qin, Y., Lu, W., Qi, Q., Liu, X., Zhou, L. & Li, T., 1 May 2015, In : Procedia CIRP. 27, p. 124-130 7 p.

Research output: Contribution to journalConference article

Open Access
1 Citation (Scopus)

Optimising Measurement Processes Using Automated Planning

Parkinson, S., Crampton, A. & Longstaff, A., Jun 2015, Advanced Mathematical and Computational Tools in Metrology and Testing X. Pavese, F., Bremser, W., Chunovkina, A., Fischer, N. & Forbes, A. B. (eds.). World Scientific, Vol. 86. p. 286-292 7 p. (Advances in Mathematics for Applied Sciences; vol. 86).

Research output: Chapter in Book/Report/Conference proceedingChapter

Review of the mathematical foundations of data fusion techniques in surface metrology

Wang, J., Leach, R. K. & Jiang, X., 1 Apr 2015, In : Surface Topography: Metrology and Properties. 3, 2, e023001.

Research output: Contribution to journalReview article

31 Citations (Scopus)

Surface topography and the impact on fatigue performance

Tardi, D., Gli, Y., Chan, H. K., Blunt, L. & Bache, M. R., 1 Jan 2015, In : Surface Topography: Metrology and Properties. 3, 1, 015007.

Research output: Contribution to journalArticle

2 Citations (Scopus)
6 Citations (Scopus)