Centre for Precision Technologies

Research Output

2011

Predicting plastic deformation and work hardening during V-band formation

Muller, M., Barrans, S. M. & Blunt, L., 1 Apr 2011, In : Journal of Materials Processing Technology. 211, 4, p. 627-636 10 p.

Research output: Contribution to journalArticle

15 Citations (Scopus)

Representing the process of machine tool calibration on first-order logic

Parkinson, S., Longstaff, A. P., Crampton, A., Fletcher, S., Allen, G. & Myers, A., 2011, Proceedings of 2011 17th International Conference on Automation and Computing, ICAC 2011. p. 22-27 6 p. 6084895

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Roundness Filtration by Using a Robust Regression Filter

Zeng, W., Scott, P. J. & Jiang, X., 15 Feb 2011, In : Measurement Science and Technology. 22, 3, 035108.

Research output: Contribution to journalArticle

Open Access
10 Citations (Scopus)

Structured geometry surfaces features for optimised function

Blunt, L., 2011, Proceedings of the 11th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2011. Shore, P., Spaan, H., Burke, T. & Van Brussel, H. (eds.). euspen, Vol. 1. p. 247-250 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

The Contribution of the Micropores in Bone Cement Surface to Generation of Femoral Stem Wear in Total Hip Replacement

Blunt, L., Jiang, X., Barrans, S., Zhang, H. & Brown, L., 1 Oct 2011, In : Tribology International. 44, 11, p. 1476-1482 7 p.

Research output: Contribution to journalArticle

23 Citations (Scopus)

The Significance of the Micropores at the Stem-Cement Interface in Total Hip Replacement

Blunt, L., Jiang, X., Brown, L., Barrans, S. & Zhang, H., 2011, In : Journal of Biomaterials Science, Polymer Edition. 22, 7, p. 845-856 12 p.

Research output: Contribution to journalReview article

21 Citations (Scopus)

The use of surface segmentation methods to characterise laser zone surface structure on hard disc drives

Blunt, L. & Xiao, S., 3 Jun 2011, In : Wear. 271, 3-4, p. 604-609 6 p.

Research output: Contribution to journalArticle

28 Citations (Scopus)

Traceology, quantifying finishing machining and function: A tool and wear mark characterisation study

Thomas, T. R., Rosén, B. G., Zahouani, H., Blunt, L. & Mansori, M. E., 3 Jun 2011, In : Wear. 271, 3-4, p. 553-558 6 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)
2010

A Chip Tuneable Laser Developed for On-Line Micro-Nano Scale Surface Measurements

Xiangqian, J., Yang, S., Maxwell, G., Wyatt, R. & Rogers, D., 9 Aug 2010, In : Measurement Science and Technology. 21, 10, 105901.

Research output: Contribution to journalArticle

Open Access
4 Citations (Scopus)

A Fast Algorithm for the 2nd Order Robust Areal Gaussian Regression Filter

Zeng, W., Jiang, X. & Scott, P., 2010, Proceedings of the 10th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2010. euspen, Vol. 1. p. 508-511 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A holistic approach to quantifying and controlling the accuracy, performance and availability of machine tools

Willoughby, P., Verma, M., Longstaff, A. P. & Fletcher, S., 14 Jul 2010, Proceedings of the 36th International MATADOR Conference. Hinduja, S. & Li, L. (eds.). Springer London, p. 313-316 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

An Approach of Assessment for Ultra-Precision V-Groove Structured Surfaces

Jiang, X., Gao, F. & Mateboer, A., 2010, Proceedings of the 10th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2010. euspen, Vol. 1. p. 512-516 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

An Unambiguous Expression Method of the Surface Texture

Jiang, X., Scott, P. J., Qi, Q. & Liu, X., Dec 2010, In : Measurement: Journal of the International Measurement Confederation. 43, 10, p. 1398-1403 6 p.

Research output: Contribution to journalArticle

8 Citations (Scopus)

Categorical Data Model for Cylindricity Consistent with Geometrical Product Specifications Standard System

Jiang, X., Scott, P., Qi, Q., Lu, W. & Liu, X., 28 Dec 2010, Sixth International Symposium on Precision Engineering Measurements and Instrumentation. Vol. 7544. 75446S

Research output: Chapter in Book/Report/Conference proceedingConference contribution

22 Citations (Scopus)

Characterization of Surface Generation of Optical Microstructures Using a Pattern and Feature Parametric Analysis Method

Jiang, X. Q., Blunt, L., Scott, P., Kong, L. B., Cheung, C. F., Lee, W. B. & To, S., Oct 2010, In : Precision Engineering. 34, 4, p. 755-766 12 p.

Research output: Contribution to journalArticle

23 Citations (Scopus)

E-Learning course sam-emu - Statistical analysis of measurement data for the evaluation of measurement uncertainty

Plowucha, W., Jakubiec, W., Werner, T., Savio, E. & Blunt, L., 14 Apr 2010, Advances in Coordinate Metrology. Sladek, J. & Jukubiec, W. (eds.). p. 382-389 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
20 Citations (Scopus)

Fast Surface Measurement Using Wavelength Scanning Interferometry with Compensation of Environmental Noise

Jiang, X., Gao, F., Muhamedsalih, H. & Wang, K., 20 May 2010, In : Applied Optics. 49, 15, p. 2903-2909 7 p.

Research output: Contribution to journalArticle

74 Citations (Scopus)

Modeling and Simulation of an Identical Double Micro-Ring Resonator

Jiang, X. & Yang, S., 29 Nov 2010, 2010 IEEE 5th International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2010. p. 1149-1153 5 p. 5592534

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Modeling the Integration Between Specifications and Verification for Cylindricity Based on Category Theory

Jiang, X., Scott, P., Qi, Q., Lu, W. & Liu, X., 13 Oct 2010, In : Measurement Science and Technology. 21, 11, 115107.

Research output: Contribution to journalArticle

Open Access
11 Citations (Scopus)

Rapid Phase Shifting Fiber Interferometer with Optical Stylus

Martin, H. & Jiang, X., Mar 2010, In : Optics Letters. 35, 5, p. 655-657 3 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

Robust Solution for the Evaluation of Stratified Functional Surfaces

Jiang, X., 14 Apr 2010, In : CIRP Annals - Manufacturing Technology. 59, 1, p. 573-576 4 p.

Research output: Contribution to journalArticle

13 Citations (Scopus)
Open Access
37 Citations (Scopus)

Transient Signal Separation in Watt Balance Experiments

Zeng, W., Jiang, X., Scott, P. & Smith, I. M., 1 Mar 2010, In : Physics Letters, Section A: General, Atomic and Solid State Physics. 374, 11-12, p. 1301-1306 6 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Wavelength scanning interferometer for structured surfaces

Jiang, X. & Gao, F., 1 Dec 2010, Proceedings - ASPE Summer Topical Meeting on Precision Interferometric Metrology, ASPE 2010. Vol. 49. p. 11-15 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2009

A fast algorithm for the high order linear and nonlinear Gaussian regression filter

Zeng, W., Jiang, X., Scott, P. J., Xiao, S. & Blunt, L., 2009, Proceedings of the 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009. euspen, Vol. 2. p. 356-359 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

9 Citations (Scopus)

A New Free-Form Surface Fitting Method for Precision Coordinate Metrology

Jiang, X., Scott, P. J. & Zhang, X., 15 Mar 2009, In : Wear. 266, 5-6, p. 543-547 5 p.

Research output: Contribution to journalArticle

12 Citations (Scopus)

Assessment mean lines of surface texture based on ISO5436-2

Cui, C., Jiang, X. Q., Li, X. G. & Liu, X. J., 1 May 2009, In : Guangxue Jingmi Gongcheng/Optics and Precision Engineering. 17, 5, p. 1063-1071 9 p.

Research output: Contribution to journalArticle

Automated Bullet-Identification System Based on Surface Topography Techniques

Blunt, L., Zeng, W., Jiang, X., Xiao, S. & Xie, F., 15 Mar 2009, In : Wear. 266, 5-6, p. 518-522 5 p.

Research output: Contribution to journalArticle

13 Citations (Scopus)

Comparison of volumetric analysis methods for machine tools with rotary axes

Longstaff, A. P., Fletcher, S., Poxton, A. J. & Myers, A., 2009, Laser Metrology and Machine Performance IX : 9th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2009. Cranfield: euspen, p. 87-96 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
1 Citation (Scopus)

Defining and computing machine tool accuracy

Fletcher, S., Longstaff, A. & Myers, A., 1 Jun 2009, Laser Metrology and Machine Performance IX : 9th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2009. Cheng, K. (ed.). euspen, p. 77-86 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
2 Citations (Scopus)

Evaluation and comparison of a large machine tool structure with ISO standard alignment tests

Myers, A., Barrans, S. M., Longstaff, A. P., Fletcher, S. & Ford, D. G., 1 Jun 2009, Laser Metrology and Machine Performance IX : 9th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2009. Cheng, K. (ed.). euspen, p. 57-66 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
2 Citations (Scopus)
17 Citations (Scopus)

Functions and three dimensional parameters of surface texture

Qi, Q., Liu, X. & Jiang, X., 12 Jan 2009, Fifth International Symposium on Instrumentation Science and Technology. Tan, J. & Wen, X. (eds.). SPIE, Vol. 7133. 7 p. 713303. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 7133).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
23 Citations (Scopus)

Multisensor Data Fusion in Dimensional Metrology

Jiang, X., Weckenmann, A., Sommer, K. D., Neuschaefer-Rube, U., Seewig, J., Shaw, L. & Estler, T., 16 Oct 2009, In : CIRP Annals - Manufacturing Technology. 58, 2, p. 701-721 21 p.

Research output: Contribution to journalArticle

212 Citations (Scopus)
Open Access
Open Access
15 Citations (Scopus)

The 11th International Conference on Metrology and Properties of Engineering Surfaces

Blunt, L., 15 Mar 2009, In : Wear. 266, 5-6, 1 p.

Research output: Contribution to journalEditorial

The role of tribology and metrology in the latest development of bio-materials

Blunt, L., Bills, P., Jiang, X., Hardaker, C. & Chakrabarty, G., 5 Feb 2009, In : Wear. 266, 3-4, p. 424-431 8 p.

Research output: Contribution to journalArticle

32 Citations (Scopus)

Understanding Initiation and Propogation of Fretting Wear on the Femoral Stem in Total Hip Replacement

Blunt, L. A., Jiang, X., Barrans, S. M., Brown, L. T. & Zhang, H., 15 Mar 2009, In : Wear. 266, 5-6, p. 566-569 4 p.

Research output: Contribution to journalArticle

39 Citations (Scopus)

What Results in Fretting Wear on Polished Femoral Stems

Blunt, L. A., Barrans, S. M., Jiang, X., Brown, L. T. & Zhang, H., Dec 2009, In : Tribology International. 42, 11-12, p. 1605-1614 10 p.

Research output: Contribution to journalArticle

24 Citations (Scopus)
2008
6 Citations (Scopus)

An Integrated Optical Coupler Used in a Fibre Interferometry System for On-Line Surface Measurements

Jiang, X., Maxwell, G., Yang, S. & Wang, K., 1 Mar 2008, In : Optics Communications. 281, 5, p. 1099-1107 9 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)

An investigation on generation of debris at the stem cement interface

Zhang, H., Brown, L., Blunt, L. & Barrans, S., 28 May 2008, 8th World Biomaterials Congress 2008. Vol. 4. p. 1768 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A surface texture information system integrated with AutoCAD for next generation GPS

Qi, Q., Liu, X. & Jiang, X., 12 Jun 2008, In : Key Engineering Materials. 381-382, p. 237-240 4 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
5 Citations (Scopus)

Determining Sample Size in Binary Measurement System

Zhao, Y., He, Z., Blunt, L., Jiang, X., Cao, Y. & Zhang, H., 31 Dec 2008, Fourth International Symposium on Precision Mechanical Measurements. Fei, Y., Fan, K-C. & Lu, R. (eds.). SPIE, Vol. 7130. 7 p. 71305X. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 7130).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Developing techniques for the dimensional assessment of true clinical wear in retrieved total joint replacements

Bills, P. J., Blunt, L. & Chakrabarty, G., 1 Jan 2008, Materials for Improved Wear Resistance of Total Artificial Joints. Igartua, A., Fuentes, E., Bayon, R. & Viteri, V. S. D. (eds.). Eibar, Spain: Tekniker, p. 109-118 10 p.

Research output: Chapter in Book/Report/Conference proceedingChapter