Centre for Precision Technologies

Research Output

2008

GPGPU-Based Gaussian Filtering for Surface Metrological Data Processing

Xu, Z., Jiang, X. & Su, Y., 19 Sep 2008, Proceedings of 12th International Conference Information Visualisation, IV08. p. 94-99 6 p. 4577932

Research output: Chapter in Book/Report/Conference proceedingConference contribution

13 Citations (Scopus)
26 Citations (Scopus)
32 Citations (Scopus)

Investigation on the Noise Separation in Watt Balance Experiments

Zeng, W., Jiang, X., Blunt, L. & Scott, P., 17 Jul 2008, In : Key Engineering Materials. 381-382, p. 619-622 4 p.

Research output: Contribution to journalArticle

Linear Feature Extraction Based on Complex Ridgelet Transform

Jiang, X., Zeng, W., Blunt, L., Scott, P. & Ma, J., 4 Mar 2008, In : Wear. 264, 5-6, p. 428-433 6 p.

Research output: Contribution to journalArticle

19 Citations (Scopus)

Measurement and Characterization of Surface Quality in Fast Tool Servo Machining of Optical Microstructures

Jiang, X. Q., Cheung, C. F., Kwok, T. C., To, S., Lee, W. B. & Li, H. F., 17 Jul 2008, In : Key Engineering Materials. 381-382, p. 517-520 4 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Morphological component analysis based detection of transient behaviour in environmental vibration for the watt balance

Zeng, W., Jiang, X., Scott, P. & Blunt, L., 2008, Proceedings of the 10th Anniversary International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2008. Van Brussel, H., Spaan, H., Brinksmeier, E. & Burke, T. (eds.). euspen, Vol. 1. p. 275-279 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Optimal Tolerance Design for Products with Correlated Characteristics by Considering the Present Worth of Quality Loss

Jiang, X. Q., Peng, H. P., Xu, Z. G. & Liu, X. J., Oct 2008, In : International Journal of Advanced Manufacturing Technology. 39, 1-2, p. 1-8 8 p.

Research output: Contribution to journalArticle

Open Access
14 Citations (Scopus)

Recognition of MEMS Microstructure Feature Based on Pattern Analysis and Classification

Jiang, X. Q., Hu, K. & Liu, X. J., 11 Feb 2008, In : Key Engineering Materials. 364-366 I, p. 555-559 5 p.

Research output: Contribution to journalArticle

Research on Specification Uncertainty in the Next Generation GPS

Jiang, X., Lu, W., Liu, X. & Xu, Z., 17 Jul 2008, In : Key Engineering Materials. 381-382, p. 561-564 4 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Signal Denoising of MEMS Microstructure Profile

Jiang, X. Q., Hu, K. & Liu, X. J., 17 Jul 2008, In : Key Engineering Materials. 381-382, p. 69-72 4 p.

Research output: Contribution to journalArticle

Static shear strength between polished stem and seven commercial acrylic bone cements

Zhang, H., Brown, L. & Blunt, L., Feb 2008, In : Journal of Materials Science: Materials in Medicine. 19, 2, p. 591-599 9 p.

Research output: Contribution to journalArticle

16 Citations (Scopus)

Study on the Uncertainties of Form Errors Evaluation Under the New GPS Framework

Jiang, X., Cui, C., Huang, F. & Liu, X., 2008, Advanced Design and Manufacture to Gain a Competitive Edge: New Manufacturing Techniques and their Role in Improving Enterprise Performance. CSREA Press, p. 589-599 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surface and form metrology of polished "freeform" biological surfaces

Charlton, P. & Blunt, L., 4 Mar 2008, In : Wear. 264, 5-6, p. 394-399 6 p.

Research output: Contribution to journalArticle

13 Citations (Scopus)

The Development of User-Friendly Software Measurement Standards for Surface Topography Software Assessment

Blunt, L., Jiang, X., Scott, P., Leach, R. & Harris, P., 4 Mar 2008, In : Wear. 264, 5-6, p. 389-393 5 p.

Research output: Contribution to journalArticle

25 Citations (Scopus)

Vibration Compensating Beam Scanning Interferometer for Surface Measurement

Martin, H., Jiang, X. & Wang, K., Mar 2008, In : Applied Optics. 47, 7, p. 888-893 6 p.

Research output: Contribution to journalArticle

15 Citations (Scopus)

Wavelets and their Applications for Surface Metrology

Jiang, X., Scott, P. & Whitehouse, D., 9 May 2008, In : CIRP Annals - Manufacturing Technology. 57, 1, p. 555-558 4 p.

Research output: Contribution to journalArticle

33 Citations (Scopus)
2007

A Better Understanding of the Surface Topography at the Stem-Cement Interface

Zhang, H., Brown, L. & Blunt, L., 2007, 2007 Proceedings of the ASME/STLE International Joint Tribology Conference, IJTC 2007. Vol. PART A. p. 513-515 3 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Actively stabilised optical device for potential on-line assessment of surfaces in ultra precision manufacturing

Jiang, X. & Wang, K., 2007, Laser Metrology and Machine Performance VIII: 8th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2007. Thornett, E. (ed.). Bedford: euspen, p. 330-338 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A new approach to surface metrology - Structured surfaces

Blunt, L., Jiang, X. & Scott, P., 2007, Proceedings of the 7th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2007. Thornett, E. (ed.). euspen, Vol. 1. p. 254-257 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Development of a technique for accurately determining clinical wear in explanted total hip replacements

Bills, P., Blunt, L. & Jiang, X., 10 Sep 2007, In : Wear. 263, 7-12 SPEC. ISS., p. 1133-1137 5 p.

Research output: Contribution to journalArticle

35 Citations (Scopus)

Freeform Surface Characterisation - A Fresh Strategy

Jiang, X., Scott, P. & Whitehouse, D., 14 Jun 2007, In : CIRP Annals - Manufacturing Technology. 56, 1, p. 553-556 4 p.

Research output: Contribution to journalArticle

62 Citations (Scopus)

Light-beam scanning interferometry for on-line ultra precision surface measurement

Wang, K., Jiang, X., Martin, H. & Blunt, L., 24 May 2007, Proceedings of the 7th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2007. euspen, Vol. 1. p. 302-305 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Micromechanical versus chemical bonding between CoCr alloys and methacrylate resins

Barclay, C. W., Spence, D., Laird, W. R. E., Marquis, P. M. & Blunt, L., May 2007, In : Journal of Biomedical Materials Research - Part B Applied Biomaterials. 81B, 2, p. 351-357 7 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)

Paradigm Shifts in Surface Metrology. Part I. Historical Philosophy

Jiang, X., Blunt, L., Scott, P. J. & Whitehouse, D. J., 8 Sep 2007, In : Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences. 463, 2085, p. 2049-2070 22 p.

Research output: Contribution to journalReview article

84 Citations (Scopus)

Paradigm Shifts in Surface Metrology. Part II. The Current Shift

Jiang, X., Blunt, L., Scott, P. J. & Whitehouse, D. J., 8 Sep 2007, In : Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences. 463, 2085, p. 2071-2099 29 p.

Research output: Contribution to journalReview article

158 Citations (Scopus)
22 Citations (Scopus)

The Detection of Transient Behaviour in Environmental Vibration for the Watt Balance

Jiang, X., Zeng, W., Scott, P., Smith, I. M. & Malétras, F. X., 27 Mar 2007, In : Measurement Science and Technology. 18, 5, p. 1487-1494 8 p., 039.

Research output: Contribution to journalArticle

7 Citations (Scopus)
2006

A novel robust Gaussian filtering method for the characterization of surface generation in ultra-precision machining

Li, H., Cheung, C. F., Jiang, X. Q., Lee, W. B. & To, S., 1 Oct 2006, In : Precision Engineering. 30, 4, p. 421-430 10 p.

Research output: Contribution to journalArticle

21 Citations (Scopus)

A study of pattern and feature analysis of surface generation in fast tool servo machining of optical microstructures

Cheung, C. F., Jiang, X. Q., To, S., Lee, W. B., Kwok, T. C. & Li, H. F., Oct 2006, Proceedings of the 21st Annual ASPE Meeting: ASPE 2006. American Society for Precision Engineering, ASPE, 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Decision rules for workpieces based on total uncertainty

Wang, J. X., Jiang, X., Ma, L. M., Xu, Z. G. & Li, Z., 1 May 2006, In : International Journal of Advanced Manufacturing Technology. 28, 11-12, p. 1169-1174 6 p.

Research output: Contribution to journalArticle

16 Citations (Scopus)

Design of Softgauge for Surface Profile Evaluation

Jiang, X. Q., Nie, M. Q. & Liu, X. J., Oct 2006, In : Journal of Physics: Conference Series. 48, 1, p. 138-142 5 p., 025.

Research output: Contribution to journalArticle

Open Access
2 Citations (Scopus)

Evaluation & management of measurement uncertainty in the new generation Geometrical Product Specification (GPS)

Peng, H., Liu, X., Jiang, X. & Xu, Z., 13 Oct 2006, Third International Symposium on Precision Mechanical Measurements. Fan, K-C., Gao, W., Yu, X., Huang, W. & Hu, P. (eds.). SPIE, Vol. 6280. 10 p. 628038. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 6280).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Feature Extraction for Structured Surface Based on Surface Networks and Edge Detection

Blunt, L., Scott, P., Jiang, X., Xiao, S. & Xie, F., 1 Feb 2006, In : Materials Science in Semiconductor Processing. 9, 1-3, p. 210-214 5 p.

Research output: Contribution to journalArticle

16 Citations (Scopus)

Foundation of Digital Manufacture: The Improved GPS system

Cui, C., Jiang, X., Liu, X. & Li, Z., 2006, In : Wuhan Ligong Daxue Xuebao/Journal of Wuhan University of Technology. 2006, SUPPL. 1, p. 132-136 5 p.

Research output: Contribution to journalArticle

Frequency Stabilisation of Transverse Zeeman He-Ne Laser by Means of Model Predictive Control

Jiang, X., Lin, D., Dai, G. & Yin, C., 1 Dec 2006, In : Review of Scientific Instruments. 77, 12, 123301.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Investigation of Some Critical Aspects of On-Line Surface Measurement by a Wavelength-Division-Multiplexing Technique

Jiang, X., Blunt, L., Lin, D., Zhang, W. & Zhang, L., 31 Jan 2006, In : Measurement Science and Technology. 17, 3, p. 483-487 5 p.

Research output: Contribution to journalArticle

Open Access
9 Citations (Scopus)

Knowledge structure of form specification of the next generation GPS information system

Lu, W., Liu, X., Jiang, X. & Xu, Z., 30 Oct 2006, Sixth International Symposium on Instrumentation and Control Technology: Sensors, Automatic Measurement, Control, and Computer Simulation. Fang, J. & Wang, Z. (eds.). SPIE, Vol. 6358. 6 p. 63585B. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 6358 ).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Miniaturized Optical Measurement Methods for Surface Nanotechnology

Jiang, X. & Whitehouse, D., 2006, In : CIRP Annals - Manufacturing Technology. 55, 1, p. 577-580 4 p.

Research output: Contribution to journalArticle

10 Citations (Scopus)

Near Common-Path Optical Fiber Interferometer for Potentially Fast On-Line Microscale-Nanoscale Surface Measurement

Jiang, X., Martin, H. & Wang, K., 15 Dec 2006, In : Optics Letters. 31, 24, p. 3603-3605 3 p.

Research output: Contribution to journalArticle

15 Citations (Scopus)

New advance in confocal microscopy

Yin, C., Lin, D., Liu, Z. & Jiang, X., 31 Jan 2006, In : Measurement Science and Technology. 17, 3, p. 596-600 5 p.

Research output: Contribution to journalArticle

12 Citations (Scopus)

Seventh International Symposium on Measurement Technology and Intelligent Instrument

Jiang, X. & Whitehouse, D., 1 Mar 2006, In : Measurement Science and Technology. 17, 3

Research output: Contribution to journalEditorial

Open Access

Surface integrity of provisional resin materials

Abouelatta, O. B., El-Bediwi, A., Sakrana, A., Jiang, X. Q. & Blunt, L., 1 Mar 2006, In : Measurement Science and Technology. 17, 3, p. 584-591 8 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

The application of optics polishing to free form knee implants

Blunt, L., Charlton, P., Beaucamp, A. & Jiang, X., 2006, Proceedings of the 6th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2006. Zervos, H. (ed.). euspen, Vol. 2. p. 188-191 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

The case of surface texture parameter RSm

Scott, P. J., Mar 2006, In : Measurement Science and Technology. 17, 3, p. 559-564 6 p.

Research output: Contribution to journalArticle

8 Citations (Scopus)

The development of measurement protocol for characterisation of ultra smooth surfaces

Brown, L. & Blunt, L., 2006, Proceedings of the 6th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2006. Zervos, H. (ed.). euspen, Vol. 1. p. 516-519 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

The primary structure design of a birefringent lens with the concept of pseudo-chromatic aberration

Zhang, R., Lin, D., Yin, C. & Jiang, X., 1 May 2006, In : Measurement Science and Technology. 17, 6, p. 1367-1371 5 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

The use of CMM techniques to assess the wear of total knee replacements

Blunt, L., Bills, P. J., Hardaker, C. & Pantelis, C., 1 Aug 2006, Nordtrib 2006 - The 12th Nordic Symposium on Tribology. Lyngby, Denmark: DTU Tryk, p. 61 1 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

2005

A metrology solution for the orthopaedic industry

Bills, P., Brown, L., Jiang, X. & Blunt, L., 1 Jan 2005, In : Journal of Physics: Conference Series. 13, 1, p. 316-319 4 p.

Research output: Contribution to journalArticle

17 Citations (Scopus)