Centre for Precision Technologies

Research Output 1995 2020

Filter
Conference contribution
2019

In-situ axis error detection module

Furness, T., Fletcher, S., Longstaff, A., Bell, A. & McVey, S., Jun 2019, European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 19th International Conference and Exhibition, EUSPEN 2019: 19th International Conference and Exhibition . Leach, R. K., Billington, D., Nisbet, C. & Phillips, D. (eds.). euspen, p. 214-217 4 p. P2.24

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Error detection
modules
Diodes
Calibration
Michelson interferometers

Training in the aeronautic industry for geometrical quality control and large scale metrology

Rocha, L., Bills, P., Marxer, M. & Savio, E., 2019, Proceedings of the 12th International Conference on Measurement and Quality Control. Pleiades Publishing, p. 162-169 8 p. (Lecture Notes in Mechanical Engineering).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aviation
Quality control
Industry
Electronic data interchange
Process control
2018

Characterisation of powder-filled defects in additive manufactured surfaces using X-ray CT

Tawfik, A., Bills, P., Blunt, L. & Racasan, R., 1 Feb 2018, 8th Conference on Industrial Computed Tomography. 8 p. (Open Access Database of Nondestructive Testing).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
Powders
X rays
Defects
3D printers
Inspection
2 Citations (Scopus)

Characterization of Material Loss from Femoral Stem Taper Surfaces through Development of a Responsive Morphological Filtering Technique

Dransfield, K., Racasan, R., Blunt, L. & Bills, P., 1 Jun 2018, Beyond the Implant: Retrieval Analysis Methods for Implant Surveillance. Mihalko, W. M., Lemons, J. E., Greenwald, A. S. & Kurtz, S. M. (eds.). West Conshohocken, USA: ASTM International, Vol. STP 1606. p. 173-190 18 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Arthroplasty
Topography
Diamonds
Wear of materials
3 Citations (Scopus)

Dynamic Testing and Characterization of Advanced Materials in a New Experiment at CERN HiRadMat Facility

Bertarelli, A., Accettura, C., Berthomé, E., Bianchi, L., Carra, F., Fichera, C., Frankl, M., Gobbi, G., Grosclaude, P., Valenzuela, J., Guinchard, M., Lechner, A., Pasquali, M., Redaelli, S., Rigutto, E., Sacristan de Frutos, O., Bolz, P., Simon, P., Furness, T., Mollicone, P. & 1 others, Portelli, M., Jun 2018, 9th International Particle Accelerator Conference . Joint Accelerator Conferences Website (JACoW), p. 2534-2537 4 p. WEPMF071

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
coatings
vibration meters
strain gages
particle beams
temperature sensors

Optimization of surface determination strategies to enhance detection of unfused powder in metal additive manufactured components

Tawfik, A., Bills, P., Blunt, L. & Racasan, R., 2018, Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing. American Society for Precision Engineering, ASPE, p. 281-285 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3D printers
Powders
Inspection
Defects
Metals

Towards smart measurement plan using category ontology modelling

Qi, Q., Scott, P. & Jiang, X., 1 Dec 2018, Advanced Mathematical and Computational Tools in Metrology and Testing XI. Forbes, A. B., Zhang, N-F., Chunovkina, A. & Eichstädt, S. (eds.). Glasgow, Scotland, Vol. 87. p. 315-323 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ontology
Specifications
Knowledge representation
Global positioning system
Textures

Workpiece temperature measurement and stabilization prior to dimensional measurement

Mian, N., Fletcher, S. & Longstaff, A., 23 Mar 2018, Conference on Thermal Issues in Machine Tools: Proceedings. p. 367-377 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Temperature measurement
Stabilization
Surface measurement
Thermodynamic stability
Boundary conditions
2017

Areal surface measurement using multidirectional laser line scanning

Akowua, K., Fletcher, S., Longstaff, A. & Mian, N., 15 Mar 2017, Laser metrology and machine performance XII: Papers presented at the Twelfth International Conference and Exhibition on Laser Metrology, Coordinate Measuring Machine and Machine Tool Performance (LAMDAMAP 2017). Blunt, L. & Knapp, W. (eds.). Bedfordshire: euspen, p. 175-184 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surface measurement
Scanning
Lasers
Machine tools
Data acquisition

Atomistic investigation of FIB-induced damage in diamond cutting tools under various ion irradiation conditions

Tong, Z., Jiang, X., Bai, Q. & Blunt, L., 26 May 2017, Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017. Phillips, D. (ed.). euspen, p. 95-96 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
Diamond cutting tools
Diamond
Focused ion beams
Ion bombardment
ion irradiation

Calibration of an Interferometric Surface Measurement System on an Ultra-Precision Turning Lathe

Li, D., Jiang, X., Blunt, L., Tong, Z. & Ding, F., 1 Jan 2017, Laser Metrology and Machine Performance XII - 12th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2017. euspen, p. 252-255 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surface measurement
Calibration
machine tools
Machine tools
Machine vibrations

Development of an ultra-precision grinding technique for the production of structured micro-patches on ceramics and tool steel

Young, C., Blunt, L. & Tong, Z., 26 May 2017, Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017. Phillips, D. (ed.). euspen, p. 207-208 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
Tool steel
grinding
steels
ceramics
Diamond

Development of on-machine measurement for ultra-precision machining

Li, D., Jiang, X., Blunt, L., Tong, Z., Williamson, J. & Young, C., 26 May 2017, Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017. Phillips, D. (ed.). euspen, p. 73-74 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
machining
Machining
Interferometers
interferometers
manufacturing
1 Citation (Scopus)

Development of Precision Polishing Machine Based on Parallel-Kinematic System

Mohamed, Z., Blunt, L., Young, C., Tong, Z. & Li, D., 1 Jan 2017, Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017. euspen, p. 273-274 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Polishing machines
Polishing
polishing
Kinematics
kinematics
1 Citation (Scopus)

Effect of machining parameters on surface roughness in Al 2618 alloy subject to multi-axis machining process using ball nose cutting tools

Tabriz, M. S. E., Barrans, S. & Bills, P., 18 Sep 2017, 2017 8th International Conference on Mechanical and Aerospace Engineering, ICMAE 2017. Institute of Electrical and Electronics Engineers Inc., p. 16-20 5 p. 8038609

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
Cutting tools
Machining
Surface roughness
Durability
Fatigue of materials
2 Citations (Scopus)

Evaluation of automated flexible gauge performance using experimental designs

Papananias, M., Fletcher, S., Longstaff, A., Mengot, A., Jonas, K. & Forbes, A., 15 Mar 2017, Laser metrology and machine performance XII: Papers presented at the Twelfth International Conference and Exhibition on Laser Metrology, Coordinate Measuring Machine and Machine Tool Performance (LAMDAMAP 2017). Blunt, L. & Knapp, W. (eds.). Bedfordshire: euspen, p. 45-54 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Design of experiments
Gages
Scanning
Gaging
Environmental impact

Expedient identification of the dynamics of ball-screw drives using online-validation

Hatwesh, A., Fletcher, S., Longstaff, A., Pan, W. & Gu, F., 26 Oct 2017, 2017 23rd International Conference on Automation and Computing (ICAC). Institute of Electrical and Electronics Engineers Inc., 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ball screws
Modal analysis
Machine tool drives
Dynamic models
Productivity
3 Citations (Scopus)

Full-field 3D shape measurement of specular object having discontinuous surfaces

Zhang, Z., Huang, S., Gao, N., Gao, F. & Jiang, X., 13 Jun 2017, Proceedings Volume 10449, Fifth International Conference on Optical and Photonics Engineering. Asundi, A. K. (ed.). Washington, USA: SPIE, 11 p. 104490T

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
Mirrors
Position measurement
Computer vision
Cameras
Calibration

Machine Acceleration Effects on Computer Controlled Polishing

Faehnle, O., Reynolds, C., Yu, G. & Walker, D., 1 Aug 2017, Optical Fabrication and Testing Conference Proceedings 2017. OSA - The Optical Society, 3 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Polishing
Pressure distribution
Derivatives

Metrology Education Impediment in Developing Countries Considering the Case of Nigeria

Ibrahim, S., Bills, P. & Allport, J., 26 Jun 2017, Canada International Conference on Education (CICE-2017). Shoniregun, C. A. & Akmayeva, G. A. (eds.). p. 471-475 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
Nigeria
developing country
educational institution
curriculum
education
2 Citations (Scopus)

Modelling Uncertainty Associated with Comparative Coordinate Measurement through Analysis of Variance Techniques

Papananias, M., Fletcher, S., Longstaff, A., Mengot, A., Jonas, K. & Forbes, A. B., Jun 2017, Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017. euspen, p. 407-408 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

analysis of variance
Analysis of variance (ANOVA)
Gaging
equators
Design of experiments
1 Citation (Scopus)

More steps towards process automation for optical fabrication

Walker, D., Yu, G., Beaucamp, A., Bibby, M., Li, H., McCluskey, L., Petrovic, S. & Reynolds, C., 2017, Fourth European Seminar on Precision Optics Manufacturing. Fähnle, O. W., Rascher, R. & Wünsche, C. (eds.). SPIE, 8 p. 103260S. (Proceedings of SPIE; vol. 10326).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Optical Fabrication
automation
Automation
Fabrication
fabrication
1 Citation (Scopus)

On the Exploitation of Automated Planning for Reducing Machine Tools Energy Consumption Between Manufacturing Operations

Parkinson, S., Longstaff, A., Fletcher, S., Vallati, M. & Chrpa, L., 2017, 27th International Conference on Automated Planning and Scheduling: (ICAPS 2017). Barbulescu, L., Frank, J., M. & Smith, S. F. (eds.). Association for the Advancement of Artificial Intelligence, 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
Machine tools
Energy utilization
Planning
Environmental impact
Machining
1 Citation (Scopus)

Results from an interlaboratory comparison of areal surface texture parameter extraction from X-ray computed tomography of additively manufactured parts

Townsend, A., Racasan, R., Bills, P., Thompson, A., Senin, N., Leach, R. & Blunt, L., 26 May 2017, Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017. Phillips, D. (ed.). euspen, p. 385-386 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
Parameter extraction
Tomography
textures
Textures
tomography

Simultaneous Multi-Type Feature Separation for Complex Structured Surface

Zeng, W., Lou, S., Abdul-Rahman, H. S., Jiang, X. & Scott, P., 15 Mar 2017, Laser Metrology and Machine Performance XII - 12th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2017. euspen, Vol. 2017-January. p. 222-231 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
medical electronics
textures
Textures
bioengineering
Electronic medical equipment
2016

A key point method for data registration for MultiSensor fusion

Zeng, W., Jiang, X., Lou, S. & Scott, P., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen, p. 69-70 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
Sensor data fusion
multisensor fusion
Data fusion
Feature extraction
shift
4 Citations (Scopus)

A new strategy for improving vision based tracking accuracy based on utilization of camera calibration information

Alzarok, H., Fletcher, S. & Longstaff, A. P., 24 Oct 2016, 22nd International Conference on Automation and Computing: ICAC 2016: Tackling the New Challenges in Automation and Computing. Institute of Electrical and Electronics Engineers Inc., p. 278-283 6 p. 7604932

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
Camera Calibration
Cameras
Calibration
Camera
Error Detection

A novel camera calibration method for deflectometry system

Gao, F., Xu, Y., Ren, H., Zhang, Z. & Jiang, X., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cameras
cameras
Calibration
Pixels
pixels
2 Citations (Scopus)

A novel method based on Bayesian regularized artificial neural networks for measurement uncertainty evaluation

Papananias, M., Fletcher, S., Longstaff, A. & Mengot, A., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen, 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
Coordinate measuring machines
Neural networks
evaluation
Temperature
Uncertainty
1 Citation (Scopus)

Areal surface texture parameters on surface

Pagani, L. & Scott, P. J., 2016, Proceedings - ASPE/euspen 2016 Summer Topical Meeting: Dimensional Accuracy and Surface Finish in Additive Manufacturing. American Society for Precision Engineering, ASPE, p. 162-167 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Textures
3D printers
Tomography
Parameterization
Software packages

Atomistic investigation of the wear of nanoscale diamond cutting tools shaped by focused ion beam

Tong, Z., Jiang, X., Bai, Q., Blunt, L. & Luo, X., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
Diamond cutting tools
Focused ion beams
diamonds
ion beams
Wear of materials
1 Citation (Scopus)

Closing the metrology/process loop in CNC polishing

Walker, D. D., Yu, G., Bibby, M., Li, H. & Dunn, C. R., 2016, Third European Seminar on Precision Optics Manufacturing. SPIE, Vol. 10009. 6 p. 100090O

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Polishing
closing
Metrology
robots
polishing
1 Citation (Scopus)

Development of ultra-precision abrasive machining of functional structured surfaces

Young, C., Blunt, L., Mohamed, Z. & Tong, Z., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen, 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

abrasives
Abrasives
machining
Machining
grinding
4 Citations (Scopus)

Developments in automated flexible gauging and the uncertainty associated with comparative coordinate measurement

Forbes, A., Papananias, M., Longstaff, A., Fletcher, S., Mengot, A. & Jonas, K., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen, 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
Gaging
Coordinate measuring machines
Inspection
inspection
Uncertainty
14 Citations (Scopus)

Full-field 3D shape measurement of specular surfaces by direct phase to depth relationship

Zhang, Z., Liu, Y., Huang, S., Niu, Z., Guo, J., Gao, N., Gao, F. & Jiang, X., 24 Nov 2016, Optical Metrology and Inspection for Industrial Applications IV. SPIE, Vol. 10023. 100230X

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3D Shape Measurement
3D shape
Beam Splitter
Machine Vision
computer vision
1 Citation (Scopus)

Full-field calibration and compensation of lateral chromatic aberration based on unwrapped phase

Liu, X., Huang, S., Zhang, Z., Gao, F. & Jiang, X., 31 Oct 2016, Optical Design and Testing VII. SPIE, Vol. 10021. 10 p. 1002119

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aberrations
Aberration
aberration
Lateral
Calibration

Implementation of line-scan dispersive interferometry for defect detection

Tang, D., Gao, F. & Jiang, X., 2016, Proceedings of the 16th International Conference and 18th General Meeting of the European Society for Precision Engineering and Nanotechnology: EUSPEN 2016. Leach, R. (ed.). euspen, 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
Interferometry
interferometry
defects
manufacturing
life span
2 Citations (Scopus)

Investigating the capability of microfocus x-ray computed tomography for areal surface analysis of additively manufactured parts

Townsend, A., Blunt, L. & Bills, P., 2016, Proceedings - ASPE/euspen 2016 Summer Topical Meeting: Dimensional Accuracy and Surface Finish in Additive Manufacturing. American Society for Precision Engineering, ASPE, p. 206-210 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
Surface analysis
Tomography
X rays
Surface measurement
Product development
2 Citations (Scopus)

On characterising surface topography of metal powder bed fusion additive manufactured parts

Lou, S., Townsend, A., Jiang, X., Blunt, L., Zeng, W. & Scott, P., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen, 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
metal powder
Powder metals
Surface topography
beds
topography
3 Citations (Scopus)

Optimisation of grolishing freeform surfaces with rigid and semi-rigid tools

Yu, G., Wu, H. Y., Walker, D., Zheng, X., Li, H., Dunn, C. & Gray, C., 2016, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation II. SPIE, Vol. 9912. 6 p. 99123Q

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Free-form Surface
optimization
Optimization
spindles
Tool Path Generation

Simulation study of a refined approach for specular surfaces reconstruction in deflectometry

Gao, F., Ren, H. & Jiang, X., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, (EUSPEN), (University of Nottingham; 30 May - 3 June 2016). euspen, 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surface reconstruction
simulation
ambiguity
approximation
1 Citation (Scopus)

The ultra-precision cutting Titanium alloy (Ti-6Al-4V): Effects on its microstructure and surface mechanical properties

Bai, J., Bai, Q., He, X. & Tong, Z., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen

Research output: Chapter in Book/Report/Conference proceedingConference contribution

titanium alloys
Titanium alloys
mechanical properties
Mechanical properties
microstructure
2015

A computerised data handling procedure for defect detection and analysis for large area substrates manufactured by roll-to-roll process

Muhamedsalih, H., Elrawemi, M., Blunt, L., Lan, X. & Martin, H., 2015, Laser Metrology and Machine Performance XI - 11th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2015. euspen, p. 82-89 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

files
defects
atomic layer epitaxy
field of view
water vapor
10 Citations (Scopus)

A correlational study of areal surface texture parameters on some typical machined surfaces

Qi, Q., Li, T., Scott, P. J. & Jiang, X., 2015, 13th CIRP Conference on Computer Aided Tolerancing. Elsevier, Vol. 27. p. 149-154 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
Textures
Optical instruments
Machining
Specifications
Engineers
2 Citations (Scopus)

A criterion for comparing measurement results and determining conformity with specifications

Ding, H., Scott, P. J. & Jiang, X., 2015, 13th CIRP Conference on Computer Aided Tolerancing. Elsevier, Vol. 27. p. 143-148 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
Specifications
Uncertainty

An ANOVA method of evaluating the specification uncertainty in roughness measurement

Ding, H., Qi, Q., Scott, P. J. & Jiang, X., 2015, Laser Metrology and Machine Performance XI - 11th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2015. euspen, p. 116-125 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

specifications
roughness
interferometers
industries
sampling
3 Citations (Scopus)

An integrated opto-mechanical measurement system for in-process defect measurement on a roll-to-roll process

Muhamedsalih, H., Blunt, L., Martin, H., Hamersma, I., Elrawemi, M. & Gao, F., 2015, Laser Metrology and Machine Performance XI - 11th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2015. euspen, p. 97-105 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

mechanical measurement
foils
defects
inspection
vapors

An Investigation of factors affecting and optimizing material removal rate in computer controlled ultra-precision polishing

Ho, L. T., Cheung, C. F., Blunt, L. & Zeng, S., 2015, Precision Engineering and Nanotechnology V. Trans Tech Publications Ltd, Vol. 625. p. 446-452 7 p. (Key Engineering Materials; vol. 625).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Polishing
Orthopedics

A novel surface temperature measurement system for industrial applications

Tansley, D., Fletcher, S. & Longstaff, A., 2015, Laser Metrology and Machine Performance XI - 11th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2015. euspen, p. 51-60 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

surface temperature
temperature measurement
sensors
industries
thermistors
2 Citations (Scopus)

A particle swarm optimisation-based grey prediction model for thermal error compensation on CNC machine tools

Abdulshahed, A. M., Longstaff, A. P. & Fletcher, S., 2015, Laser Metrology and Machine Performance XI - 11th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2015. euspen, p. 363-372 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

machine tools
optimization
predictions
temperature sensors
convolution integrals