Centre for Precision Technologies

Research Output

Filter
Conference contribution
Conference contribution

A Better Understanding of the Surface Topography at the Stem-Cement Interface

Zhang, H., Brown, L. & Blunt, L., 2007, 2007 Proceedings of the ASME/STLE International Joint Tribology Conference, IJTC 2007. Vol. PART A. p. 513-515 3 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Absolute height measurement of specular surfaces with modified active fringe reflection photogrammetry

Ren, H., Jiang, X., Gao, F. & Zhang, Z., 18 Aug 2014, Interferometry XVII: Advanced Applications. Furlong, C., Gorecki, C., de Groot, P. J. & Novak, E. L. (eds.). SPIE, Vol. 9204. 8 p. 920408. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 9204).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

A computerised data handling procedure for defect detection and analysis for large area substrates manufactured by roll-to-roll process

Muhamedsalih, H., Elrawemi, M., Blunt, L., Lan, X. & Martin, H., 2015, Laser Metrology and Machine Performance XI - 11th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2015. euspen, p. 82-89 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A correlational study of areal surface texture parameters on some typical machined surfaces

Qi, Q., Li, T., Scott, P. J. & Jiang, X., 2015, 13th CIRP Conference on Computer Aided Tolerancing. Elsevier, Vol. 27. p. 149-154 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
10 Citations (Scopus)

A criterion for comparing measurement results and determining conformity with specifications

Ding, H., Scott, P. J. & Jiang, X., 2015, 13th CIRP Conference on Computer Aided Tolerancing. Elsevier, Vol. 27. p. 143-148 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
2 Citations (Scopus)

Actively stabilised optical device for potential on-line assessment of surfaces in ultra precision manufacturing

Jiang, X. & Wang, K., 2007, Laser Metrology and Machine Performance VIII: 8th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2007. Thornett, E. (ed.). Bedford: euspen, p. 330-338 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Advances in surface analysis technology

Jiang, X. Q. & Blunt, L., 2001, Laser Metrology and Machine Performance V. Peggs, G. N. (ed.). WIT Press, p. 247-257 11 p. (Transactions in Engineering Sciences; vol. 34).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

A Fast Algorithm for the 2nd Order Robust Areal Gaussian Regression Filter

Zeng, W., Jiang, X. & Scott, P., 2010, Proceedings of the 10th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2010. euspen, Vol. 1. p. 508-511 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A fast algorithm for the high order linear and nonlinear Gaussian regression filter

Zeng, W., Jiang, X., Scott, P. J., Xiao, S. & Blunt, L., 2009, Proceedings of the 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009. euspen, Vol. 2. p. 356-359 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

9 Citations (Scopus)

A fast and effective way to improve the merging accuracy of multi-view point cloud data

Li, F., Longstaff, A., Fletcher, S. & Myers, A., 21 Nov 2011, Proceedings of 2011 17th International Conference on Automation and Computing: ICAC 2011. Chen, W., Chen, X. & Xu, Z. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 18-21 4 p. 6084894

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A holistic approach to quantifying and controlling the accuracy, performance and availability of machine tools

Willoughby, P., Verma, M., Longstaff, A. P. & Fletcher, S., 14 Jul 2010, Proceedings of the 36th International MATADOR Conference. Hinduja, S. & Li, L. (eds.). Springer London, p. 313-316 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

A key point method for data registration for MultiSensor fusion

Zeng, W., Jiang, X., Lou, S. & Scott, P., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen, p. 69-70 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Analytical and FE Identification of lowest natural frequency of a ball-screw drive in beaver machine

Xu, Q. & Ford, D., 30 Sep 2002, Advances in Manufacturing Technology XVI : NCMR 2002: Proceedings of the Eighteenth National Conference on Manufacturing Research. Cheng, K. & Webb, D. (eds.). John Wiley and Sons Ltd, p. 247-251 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

An ANOVA method of evaluating the specification uncertainty in roughness measurement

Ding, H., Qi, Q., Scott, P. J. & Jiang, X., 2015, Laser Metrology and Machine Performance XI - 11th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2015. euspen, p. 116-125 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

An Approach of Assessment for Ultra-Precision V-Groove Structured Surfaces

Jiang, X., Gao, F. & Mateboer, A., 2010, Proceedings of the 10th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2010. euspen, Vol. 1. p. 512-516 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

An atomistic investigation of FIB process damage on diamond

Tong, Z., Luo, X., Blunt, L. & Jiang, X., 2013, Proceedings of the 13th International Conference of the European Society for Precision Engineering and Nanotechnology: EUSPEN 2013. euspen, Vol. 2. p. 265-268 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

An atomistic investigation of nanometric cutting process using a multi-tip single crystal diamond tool

Tong, Z. & Luo, X., 2013, Laser Metrology and Machine Performance X - 10th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2013. euspen, p. 283-291 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

An Efficient Offline Method for Determining the Thermally Sensitive Points of a Machine Tool Structure

Mian, N., Fletcher, S., Longstaff, A. & Myers, A., 1 Dec 2013, Proceedings of the 37th International MATADOR 2012 Conference. Hinduja, S. & Li, L. (eds.). Springer London, p. 101-104 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

A new approach to surface metrology - Structured surfaces

Blunt, L., Jiang, X. & Scott, P., 2007, Proceedings of the 7th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2007. Thornett, E. (ed.). euspen, Vol. 1. p. 254-257 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

A new strategy for improving vision based tracking accuracy based on utilization of camera calibration information

Alzarok, H., Fletcher, S. & Longstaff, A. P., 24 Oct 2016, 22nd International Conference on Automation and Computing: ICAC 2016: Tackling the New Challenges in Automation and Computing. Institute of Electrical and Electronics Engineers Inc., p. 278-283 6 p. 7604932

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
4 Citations (Scopus)

An fast and efficient algorithm for spline filters

Zeng, W., Jiang, X., Lou, S. & Scott, P. J., 24 Oct 2014, ICAC 2014 - Proceedings of the 20th International Conference on Automation and Computing: Future Automation, Computing and Manufacturing. Institute of Electrical and Electronics Engineers Inc., p. 237-242 6 p. 6935493

Research output: Chapter in Book/Report/Conference proceedingConference contribution

An integrated opto-mechanical measurement system for in-process defect measurement on a roll-to-roll process

Muhamedsalih, H., Blunt, L., Martin, H., Hamersma, I., Elrawemi, M. & Gao, F., 2015, Laser Metrology and Machine Performance XI - 11th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2015. euspen, p. 97-105 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

An interferometric auto-focusing method for on-line defect assessment on a roll-to-roll process using wavelength scanning interferometry

Muhamedsalih, H., Blunt, L., Martin, H., Jiang, X. & Elrawemi, M., 2014, Conference Proceedings - 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014. euspen, Vol. 1. p. 177-180 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

An Investigation of factors affecting and optimizing material removal rate in computer controlled ultra-precision polishing

Ho, L. T., Cheung, C. F., Blunt, L. & Zeng, S., 2015, Precision Engineering and Nanotechnology V. Trans Tech Publications Ltd, Vol. 625. p. 446-452 7 p. (Key Engineering Materials; vol. 625).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

An investigation on generation of debris at the stem cement interface

Zhang, H., Brown, L., Blunt, L. & Barrans, S., 28 May 2008, 8th World Biomaterials Congress 2008. Vol. 4. p. 1768 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A novel approach for ANFIS modelling based on Grey system theory for thermal error compensation

Abdulshahed, A. M., Longstaff, A. P. & Fletcher, S., 17 Oct 2014, 2014 14th UK Workshop on Computational Intelligence, UKCI 2014 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 6930155

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

A novel camera calibration method for deflectometry system

Gao, F., Xu, Y., Ren, H., Zhang, Z. & Jiang, X., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A novel method based on Bayesian regularized artificial neural networks for measurement uncertainty evaluation

Papananias, M., Fletcher, S., Longstaff, A. & Mengot, A., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen, 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
2 Citations (Scopus)

A novel surface temperature measurement system for industrial applications

Tansley, D., Fletcher, S. & Longstaff, A., 2015, Laser Metrology and Machine Performance XI - 11th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2015. euspen, p. 51-60 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

A particle swarm optimisation-based grey prediction model for thermal error compensation on CNC machine tools

Abdulshahed, A. M., Longstaff, A. P. & Fletcher, S., 2015, Laser Metrology and Machine Performance XI - 11th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2015. euspen, p. 363-372 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
2 Citations (Scopus)

Application of multi sensor data fusion based on principal component analysis and artificial neural network for machine tool thermal monitoring

Potdar, A. A., Longstaff, A. P., Fletcher, S. & Mian, N. S., 2015, Laser Metrology and Machine Performance XI - 11th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2015. euspen, p. 224-233 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
3 Citations (Scopus)

Areal surface measurement using multidirectional laser line scanning

Akowua, K., Fletcher, S., Longstaff, A. & Mian, N., 15 Mar 2017, Laser metrology and machine performance XII: Papers presented at the Twelfth International Conference and Exhibition on Laser Metrology, Coordinate Measuring Machine and Machine Tool Performance (LAMDAMAP 2017). Blunt, L. & Knapp, W. (eds.). Bedfordshire: euspen, p. 175-184 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Areal surface texture parameters on surface

Pagani, L. & Scott, P. J., 2016, Proceedings - ASPE/euspen 2016 Summer Topical Meeting: Dimensional Accuracy and Surface Finish in Additive Manufacturing. American Society for Precision Engineering, ASPE, p. 162-167 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

A review of the fundamentals of the finite element simulation of metal cutting

Xu, Q., Miller, B. & Ford, D., 2003, Laser Metrology and Machine Performance VI: Proceedings of the 6th International Conference on Laser Metrology, Machine Tool, CMM and Robot Performance. Lamdamap 2003. Ford, D. G. (ed.). WIT Press, Vol. 44. p. 391-399 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
1 Citation (Scopus)

A single-shot line-scanning spatially dispersed short coherence interferometer using Fourier transform profilometry

Hassan, M., Martin, H. & Jiang, X., 2015, Laser Metrology and Machine Performance XI - 11th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2015. euspen, p. 2-7 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

A study of pattern and feature analysis of surface generation in fast tool servo machining of optical microstructures

Cheung, C. F., Jiang, X. Q., To, S., Lee, W. B., Kwok, T. C. & Li, H. F., Oct 2006, Proceedings of the 21st Annual ASPE Meeting: ASPE 2006. American Society for Precision Engineering, ASPE, 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Atomistic investigation of FIB-induced damage in diamond cutting tools under various ion irradiation conditions

Tong, Z., Jiang, X., Bai, Q. & Blunt, L., 26 May 2017, Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017. Phillips, D. (ed.). euspen, p. 95-96 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Atomistic investigation of the wear of nanoscale diamond cutting tools shaped by focused ion beam

Tong, Z., Jiang, X., Bai, Q., Blunt, L. & Luo, X., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Calibration of an Interferometric Surface Measurement System on an Ultra-Precision Turning Lathe

Li, D., Jiang, X., Blunt, L., Tong, Z. & Ding, F., 1 Jan 2017, Laser Metrology and Machine Performance XII - 12th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2017. euspen, p. 252-255 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Categorical Data Model for Cylindricity Consistent with Geometrical Product Specifications Standard System

Jiang, X., Scott, P., Qi, Q., Lu, W. & Liu, X., 28 Dec 2010, Sixth International Symposium on Precision Engineering Measurements and Instrumentation. Vol. 7544. 75446S

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Characterisation of powder-filled defects in additive manufactured surfaces using X-ray CT

Tawfik, A., Bills, P., Blunt, L. & Racasan, R., 1 Feb 2018, 8th Conference on Industrial Computed Tomography. 8 p. (Open Access Database of Nondestructive Testing).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File

Characterisation techniques to assess functional properties of barrier coatings for flexible PV substrates

Fleming, L., Blunt, L., Robbins, D. & Elrawemi, M., 1 Mar 2013, Laser Metrology and Machine Performance X : 10th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2013. Knapp, W. & Blunt, L. (eds.). euspen, p. 59-68 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Characterization of Material Loss from Femoral Stem Taper Surfaces through Development of a Responsive Morphological Filtering Technique

Dransfield, K., Racasan, R., Blunt, L. & Bills, P., 1 Jun 2018, Beyond the Implant: Retrieval Analysis Methods for Implant Surveillance. Mihalko, W. M., Lemons, J. E., Greenwald, A. S. & Kurtz, S. M. (eds.). West Conshohocken, USA: ASTM International, Vol. STP 1606. p. 173-190 18 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Closing the metrology/process loop in CNC polishing

Walker, D. D., Yu, G., Bibby, M., Li, H. & Dunn, C. R., 30 Jun 2016, Third European Seminar on Precision Optics Manufacturing. Rascher, R., Fähnle, O., Wünsche, C. & Schopf, C. (eds.). SPIE, Vol. 10009. 5 p. 100090O. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10009).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Comparative study of ANN and ANFIS predprediction models for thermal error compensation on CNC machine tools

Abdulshahed, A., Longstaff, A., Fletcher, S. & Myers, A., 1 Mar 2013, Laser Metrology and Machine Performance X : 10th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2013. Blunt, L. (ed.). euspen, p. 79-89 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
11 Citations (Scopus)

Comparison of Fast Fourier Transform and Convolution in Wavelength Scanning Interferometry

Muhamedsalih, H., Jiang, X. & Gao, F., 26 May 2011, Optical Measurement Systems for Industrial Inspection VII. Lehmann, P. H., Osten, W. & Gastinger, K. (eds.). SPIE, Vol. 8082. 8 p. 80820Q. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 8082).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Citations (Scopus)

Comparison of volumetric analysis methods for machine tools with rotary axes

Longstaff, A. P., Fletcher, S., Poxton, A. J. & Myers, A., 2009, Laser Metrology and Machine Performance IX : 9th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2009. Cranfield: euspen, p. 87-96 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
1 Citation (Scopus)

Compensation of thermal errors on a small vertical milling machine

Fletcher, S., Longstaff, A. P. & Myers, A., 2005, Laser Metrology and Machine Performance VII: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2005. Shore, P. (ed.). euspen, p. 432-441 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Complex wavelet transform based surface topography analysis

Zeng, W. & Jiang, X., 2005, Laser Metrology and Machine Performance VII: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2005. Shore, P. (ed.). euspen, p. 304-313 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Construct surface characterization system by assembling functional components dynamically

Lan, X., Jiang, X., Zeng, W. & Blunt, L., 2015, 13th CIRP Conference on Computer Aided Tolerancing. Elsevier, Vol. 27. p. 198-201 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access