Department of Engineering and Technology

Research Output 1982 2020

2019
Open Access
File
Electric potential
Hot Temperature

A candidate accident tolerant fuel system based on a highly concentrated alloy thin film

Tunes, M. A., Vishnyakov, V., Camara, O., Greaves, G., Edmondson, P., Zhang, Y. & Donnelly, S., Jun 2019, In : Materials Today Energy. 12, p. 356-362 7 p.

Research output: Contribution to journalArticle

Fuel systems
Accidents
Thin films
Noble Gases
Heavy Ions
2 Citations (Scopus)

Accurate and efficient height extraction in chromatic confocal microscopy using corrected fitting of the differential signal

Chen, J-C., Yang, W., Wang, J., Lu, W., Liu, X. & Jiang, X., Mar 2019, In : Precision Engineering. 56, p. 447-454 8 p.

Research output: Contribution to journalArticle

Confocal microscopy
Computational efficiency
Differential equations
Wavelength
Experiments
1 Citation (Scopus)

A composite resilience index for road transport networks

El Rashidy, R. & Grant-Muller, S., 1 Jun 2019, In : Proceedings of the Institution of Civil Engineers: Transport. 172, 3, p. 174 - 183 10 p.

Research output: Contribution to journalArticle

Open Access
transport network
resilience
road
Composite materials
Travel time

A Comprehensive Review on Regenerative Shock Absorber Systems

Zheng, P., Wang, R. & Gao, J., 3 Apr 2019, In : Journal of Vibration Engineering & Technologies. 22 p.

Research output: Contribution to journalArticle

Shock absorbers
Vibrations (mechanical)
Automobile suspensions
Recovery
Railroad cars
3 Citations (Scopus)

A co-simulation approach to the wheel–rail contact with flexible railway track

Antunes, P., Magalhães, H., Ambrósio, J., Pombo, J. & Costa, J., 15 Feb 2019, In : Multibody System Dynamics. 45, 2, p. 245-272 28 p.

Research output: Contribution to journalArticle

Co-simulation
Railroad tracks
Railway
Wheel
Rails

Acoustic and pressure characteristics of a ported shroud turbocompressor operating at near surge conditions

Sharma, S., Broatch, A., García-Tíscar, J., Nickson, K. & Allport, J., May 2019, In : Applied Acoustics. 148, p. 434-447 14 p.

Research output: Contribution to journalArticle

turbocompressors
shrouds
compressors
acoustics
turbochargers

Adaptive Beamforming with Sidelobe Suppression by Placing Extra Radiation Pattern Nulls

Gravas, I. P., Zaharis, Z. D., Yioultsis, T. V., Lazaridis, P. & Xenos, T. D., 1 Jun 2019, In : IEEE Transactions on Antennas and Propagation. 67, 6, p. 3853-3862 10 p., 8668532.

Research output: Contribution to journalArticle

Open Access
File
Beamforming
Signal interference
Direction of arrival
Iterative methods
Antenna arrays

Adaptive collimator design for future particle accelerators

Furness, T., Fletcher, S., Williamson, J., Bertarelli, A., Carra, F., Pasquali, M., Gentini, L. & Redaelli, S., 29 Jan 2019, 7th International Beam Instrumentation Conference: 2018 IBIC. Vol. 187. p. 240-244 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
particle accelerators
collimators
collimation
cleaning
specifications

Advances in Optical Fabrication for Astronomy

Walker, D., Yu, G., Li, H., Myer, B. W., Beaucamp, A. T., Namba, Y. & Wu, L., 11 May 2019, In : Monthly Notices of the Royal Astronomical Society. 485, 2, p. 2071–2082 12 p.

Research output: Contribution to journalArticle

Open Access
Astronomy
astronomy
Fabrication
fabrication
Optical design

A methodology for 3D geometrical characterisation of microfluidic channels using optical microscopy

Medeossi, F., Senin, N., Balcon, M., Carmignato, S., Savio, E. & Blunt, L., 6 Mar 2019, In : Journal of Micromechanics and Microengineering. 29, 4, 045011.

Research output: Contribution to journalArticle

Microfluidics
Optical microscopy
Surface topography
Lithography
Microscopes

A Multi-layer Security Model for 5G-enabled Industrial Internet of Things

Hill, G., Al-Aqrabi, H., Pulikkakudi Johnson, A., Lane, P. & Liu, L., 17 Aug 2019, (Accepted/In press) 7th International Conference on Smart City and Informatization (iSCI 2019), Guangzhou, China, November 12-15, 2019. Springer International Publishing AG, 14 p. (Lecture Notes in Computer Science).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hardware
Cloud computing
Authentication
Field programmable gate arrays (FPGA)
Throughput
Open Access
File
Turbines
Rotors
Inlet flow
Secondary flow
Flow structure
Open Access
File
ion scattering
Pulsed laser deposition
Oxide films
pulsed laser deposition
Transition metals

Analysis of vibration and temperature on the axle box bearing of a high-speed train

Wang, Z., Cheng, Y., Allen, P., Yin, Z., Zou, D. & Zhang, W., 12 Aug 2019, In : Vehicle System Dynamics.

Research output: Contribution to journalArticle

Bearings (structural)
Axles
Railroad cars
Light trailers
Temperature

An Approach to Reducing Input Parameter Volume for Fault Classifiers

Smith, A., Gu, F. & Ball, A., Apr 2019, In : International Journal of Automation and Computing. 16, 2, p. 199-212 14 p.

Research output: Contribution to journalArticle

Open Access
Fault
Classifiers
Classifier
Naive Bayes Classifier
Harmonic

An evaluation of gearbox condition monitoring using infrared thermal images applied with convolutional neural networks

Li, Y., Xi Gu, J., Zhen, D., Xu, M. & Ball, A., May 2019, In : Sensors (Switzerland). 19, 9, 16 p., 2205.

Research output: Contribution to journalArticle

Open Access
transmissions (machine elements)
Condition monitoring
Vibration
Hot Temperature
Infrared radiation

A new methodology to study the pantograph-catenary dynamics in curved railway tracks

Antunes, P., Ambrosio, J., Pombo, J. & Facchinetti, A., 20 Mar 2019, In : Vehicle System Dynamics. 28 p.

Research output: Contribution to journalArticle

Pantographs
Rails
Trajectories
Electric traction
Dynamic analysis
1 Citation (Scopus)

A new nonlinear displacement-dependent parametric model of a high-speed rail pantograph hydraulic damper

Wang, W., Zhou, Z., Zhang, W. & Iwnicki, S., 22 Feb 2019, In : Vehicle System Dynamics.

Research output: Contribution to journalArticle

Pantographs
Rails
Hydraulics
Shims
Computer simulation

A New SOFA Object Collection for Max

Johnson, D. & Lee, H., 17 Mar 2019, 2019 AES International Conference on Immersive and Interactive Audio. Tew, T. & Williams, D. (eds.). Audio Engineering Society, 104

Research output: Chapter in Book/Report/Conference proceedingConference contribution

acoustics
engineering
resources

An Introduction of a Robust OMA Method: CoS-SSI and Its Performance Evaluation through the Simulation and a Case Study

Liu, F., Wu, J., Gu, F. & Ball, A. D., 31 Jan 2019, In : Shock and Vibration. 2019, p. 1-14 14 p., 6581516.

Research output: Contribution to journalArticle

Open Access
Correlation methods
Modal analysis
set theory
evaluation
Structural health monitoring

An Investigation into the Acoustic Emissions of Internal Combustion Engines with Modelling and Wavelet Package Analysis for Monitoring Lubrication Conditions

Wei, N., Gu, J. X., Gu, F., Chen, Z., Li, G. & Ball, A., 16 Feb 2019, In : Energies. 12, 4, 19 p., 640.

Research output: Contribution to journalArticle

Open Access
Internal Combustion Engine
Acoustic Emission
Lubrication
Acoustic emissions
Internal combustion engines
Open Access
File
Coordinate measuring machines
Tomography
X rays
tomography
Measurement errors

A novel design of a 10-dipole log-periodic antenna with LTE-800 and GSM-900 band rejection

Mistry, K., Lazaridis, P., Hong Lo, T., Zaharis, Z. D., Glover, I. & Liu, B., 3 Feb 2019, (Accepted/In press) 2019 IEEE MTT-S International Conference on Numerical Electromagnetic and Multiphysics Modeling and Optimization (NEMO). Institute of Electrical and Electronics Engineers Inc.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Log periodic antennas
Dipole antennas
Global system for mobile communications
Antennas
Costs

A Novel Method to Valorize Frequency Support Procurement by Wind Power Plants

Attya, A. & Dominguez-Garcia, J. L., 3 Jan 2019, In : IEEE Transactions on Sustainable Energy. 10 p.

Research output: Contribution to journalArticle

Open Access
File
Wind power
Power plants
Kinetic energy
Frequency response
Dynamic response

A Parallel Surrogate Model Assisted Evolutionary Algorithm for Electromagnetic Design Optimization

Akinsolu, M., Liu, B., Grout, V., Lazaridis, P., Mognaschi, M. E. & Di Barba, P., Apr 2019, In : IEEE Transactions on Emerging Topics in Computational Intelligence. 3, 2, p. 93-105 13 p.

Research output: Contribution to journalArticle

Open Access
File
Evolutionary algorithms
Parallel processing systems
Machine design
Dielectric resonators
Design optimization

A Perceptual Model of Punch Based on Weighted Transient Loudness

Fenton, S. & Lee, H., 9 Jun 2019, In : AES: Journal of the Audio Engineering Society. 67, 6, p. 429-439 11 p.

Research output: Contribution to journalArticle

Regression analysis
Loudness
Acoustic waves
Onset
Stimulus
1 Citation (Scopus)

A Performance Evaluation of Two Bispectrum Analysis Methods Applied to Electrical Current Signals for Monitoring Induction Motor-Driven Systems

Huang, B., Feng, G., Tang, X., Gu, J. X., Xu, G., Cattley, R., Gu, F. & Ball, A., 15 Apr 2019, In : Energies. 12, 8, 23 p., 1438.

Research output: Contribution to journalArticle

Open Access
Bispectrum
Induction Motor
Induction motors
Performance Evaluation
Rotors

A predictive integrated framework based on the radial basis function for the modelling of the flow of pharmaceutical powders

Alshafiee, M., AlAlaween, W. H., Markl, D., Soundaranathan, M., Almajaan, A., Walton, K., Blunt, L. & Asare-Addo, K., 19 Jul 2019, In : International Journal of Pharmaceutics. 568, 11 p., 118542.

Research output: Contribution to journalArticle

Particle Size
Powders
Excipients
Artificial Intelligence
Pharmaceutical Preparations
3 Citations (Scopus)

Areal topography measurement of metal additive surfaces using focus variation microscopy

Newton, L., Senin, N., Gomez, C., Danzl, R., Helmli, F., Blunt, L. & Leach, R., Jan 2019, In : Additive Manufacturing. 25, p. 365-389 25 p.

Research output: Contribution to journalArticle

Open Access
Topography
Microscopic examination
Metals
Textures
Powders

A review on energy harvesting supplying wireless sensor nodes for machine condition monitoring

Tang, X., Mones, Z., Wang, X., Gu, F. & Ball, A. D., 1 Jul 2019, 2018 24th IEEE International Conference on Automation and Computing ICAC 2018. Ma, X. (ed.). Institute of Electrical and Electronics Engineers Inc., 8748946

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Condition Monitoring
Energy Harvesting
Energy harvesting
Wireless Sensors
Condition monitoring

A search algorithm for accuracy improvement of holistic calibration of stereo stereo deflectometry

Xu, Y., Gao, F. & Jiang, X., 16 Jul 2019, (Accepted/In press) International Conference on Optical and Photonic Engineering: icOpen Proceedings. SPIE, (Proceedings of SPIE).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Calibration
Pixels
Function evaluation
Imaging systems
2 Citations (Scopus)
Open Access
File
Solar cells
Modulation
Controllers
Electric potential
Experiments
2 Citations (Scopus)

A Transmission Electron Microscopy study of the neutron-irradiation response of Ti-based MAX phases at high temperatures

Tunes, M. A., Harrison, R. W., Donnelly, S. E. & Edmondson, P. D., 1 May 2019, In : Acta Materialia. 169, p. 237-247 11 p.

Research output: Contribution to journalArticle

Open Access
Neutron irradiation
Transmission electron microscopy
Atoms
Radiation
Temperature

Automatic Spatial Audio Scene Classification in Binaural Recordings of Music

Zieliński, S. & Lee, H., 1 May 2019, In : Applied Sciences (Switzerland). 9, 9, 22 p., 1724.

Research output: Contribution to journalArticle

Open Access
music
rooms
recording
Impulse response
impulses
Ballistics
Silicon Dioxide
ballistics
Precipitates
precipitates

Binaural Rendering of Phantom Image Elevation Using VHAP

Lee, H., Mironovs, M. & Johnson, D., 10 Mar 2019, 146th AES Convention: Excite Your Ears. Loughran, R. & Angus-Whiteoak, J. (eds.). Audio Engineering Society, 498

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Loudspeakers
Virtual reality
Costs

Binaural Rendering of Virtual Elevation using the VHAP Plugin

Lee, H., Mironovs, M. & Johnson, D., 11 Jan 2019, (Accepted/In press)

Research output: Non-textual formSoftware

File
Loudspeakers
Virtual reality
Costs

BowTies for the Digital transformation safety management systems

Van Gulijk, C. & McCullogh, P., 2019, HAZARDS 29: IchemE. Derby, Vol. Hazards 29.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hazards
Industry
Big data
2 Citations (Scopus)

Capturing 360° Audio using an Equal Segment Microphone Array (ESMA)

Lee, H., 13 Jan 2019, In : AES: Journal of the Audio Engineering Society. 67, 1/2, p. 13-26 14 p.

Research output: Contribution to journalArticle

Open Access
File
Microphones
Loudspeakers
Acoustic fields
Stereophonic recordings
Spacing
1 Citation (Scopus)

Carbon nanotubes catalysis in liquid-phase aerobic oxidation of hydrocarbons: Influence of nanotube impurities

Zeynalov, E., Allen, N. S., Salmanova, N. & Vishnyakov, V., 1 Apr 2019, In : Journal of Physics and Chemistry of Solids. 127, p. 245-251 7 p.

Research output: Contribution to journalArticle

Carbon Nanotubes
Hydrocarbons
Nanotubes
Catalysis
catalysis
1 Citation (Scopus)

Cascade size and dose rate effects on α′ precipitation in ion-irradiated Fe14Cr alloy

Harrison, R. W., Carruthers, A. W., Hinks, J. A., Burke, M. G. & Donnelly, S. E., 11 Jul 2019, In : Scripta Materialia. 172, p. 33-37 5 p.

Research output: Contribution to journalArticle

Open Access
Ion bombardment
Precipitates
cascades
Ions
dosage
Open Access
File
Crystalline materials
Silicon
Air
Temperature

Changes in the morphology of microgrooved stem tapers with differing assembly conditions

Dransfield, K., Williamson, J., Racasan, R. & Bills, P., Jun 2019, In : Biotribology. 18, p. 1-11 11 p., 100096.

Research output: Contribution to journalArticle

Cones
Plastic deformation
Textures
Corrosion
Geometry
paints
fading
Crystallite size
Polymorphism
Paint
1 Citation (Scopus)

Characterisation methods for powder bed fusion processed surface topography

Lou, S., Jiang, X., Sun, W., Zeng, W., Pagani, L. & Scott, P., 1 May 2019, In : Precision Engineering. 57, p. 1-15 15 p.

Research output: Contribution to journalArticle

Open Access
File
Surface topography
Fusion reactions
Powders
3D printers
Watersheds
1 Citation (Scopus)

Characterisation of additively manufactured metal surfaces by means of X-ray computed tomography and generalised surface texture parameters

Zanini, F., Pagani, L., Savio, E. & Carmignato, S., 4 Jul 2019, In : CIRP Annals. 68, 1, p. 515-518 4 p.

Research output: Contribution to journalArticle

Tomography
Textures
Surface topography
X rays
3D printers

Characterisation of helium ion irradiated bulk tungsten: A comparison with the in-situ TEM technique

Harrison, R. W., Peng, N., Webb, R. P., Hinks, J. A. & Donnelly, S. E., 1 Jan 2019, In : Fusion Engineering and Design. 138, p. 210-216 7 p.

Research output: Contribution to journalArticle

Helium
Tungsten
Ions
Transmission electron microscopy
Experiments
Open Access
File
Arsenic
Doping (additives)
Scattering
Plasmas
Silicon

Chemical effects on He bubble superlattice formation in high entropy alloys

Harrison, R. W., Greaves, G., Le, H., Bei, H., Zhang, Y. & Donnelly, S. E., 17 Jul 2019, In : Current Opinion in Solid State and Materials Science. 8 p.

Research output: Contribution to journalArticle

Open Access
Bubble formation
Entropy
Solid solutions
Atoms
Ion bombardment