Department of Engineering and Technology

Research Output 1982 2020

Filter
Chapter
2019

Tracking with Processing and Coloring as You Go

Moore, A., 19 Mar 2019, Producing Music. Hepworth-Sawyer, R., Hodgson, J. & Marrington, M. (eds.). Routledge Taylor & Francis Group, (Perspectives on Music Production).

Research output: Chapter in Book/Report/Conference proceedingChapter

Coloring
Signal processing
Microphones
Processing
Compressors

Utilization of Non-Conformal Wheel Surfaces for Railway Dynamics

Marques, F., Pacheco Magalhaes, H., Pombo, J., Ambrsio, J. & Flores, P., 14 Jun 2019, Advances in Mechanism and Machine Science: Proceedings of the 15th IFToMM World Congress on Mechanism and Machine Science. Uhl, T. (ed.). p. 3291-3300 10 p. (Mechanisms and Machine Science; vol. 73).

Research output: Chapter in Book/Report/Conference proceedingChapter

Wheels
Dynamic response
Point contacts
Computational efficiency
Dynamic analysis
2018

Characterization of Material Loss from Femoral Stem Taper Surfaces through Development of a Responsive Morphological Filtering Technique

Dransfield, K., Racasan, R., Blunt, L. & Bills, P., 1 Jun 2018, Beyond The Implant: Retrieval Analysis Methods for Implant Surveillance. Mihalko, W. M., Lemons, J. E., Greenwald, A. S. & Kurtz, S. M. (eds.). West Conshohocken, USA: ASTM International, p. 173-190 18 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Bearings (structural)
Arthroplasty
Topography
Diamonds
Wear of materials

Introduction to IT transformation of safety and risk management systems

Van Gulijk, C., Figueres Esteban, M., Hughes, P. & Loukianov, A., 3 Apr 2018, Handbook of RAMS in railway systems: Theory and practice. Mahboob, Q. & Zio, E. (eds.). CRC Press/Balkema, p. 631-650 20 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

safety
railway
research and development
risk management
science

Mechanical design of rotors with surface mounted permanent magnets

Barrans, S. & Mallin, L., 5 Nov 2018, Electric Machines for Smart Grids Applications. El-Shahat, A. (ed.). IntechOpen, p. 87-106 20 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Open Access
Permanent magnets
Rotors
Electric machinery
Magnets
Analytical models

Methods for Characterization of Edge Wear in Ceramic-On-Ceramic Acetabular Cups

Kapadia, D., Racasan, R., Pagani, L., Al-Hajjar, M. & Bills, P., 30 Jun 2018, Beyond the Implant: Retrieval Analysis Methods for Implant Surveillance. Mihalko, W. M., Lemons, J. E., Greenwald, A. S. & Kurtz, S. M. (eds.). ASTM International, Vol. STP 1606. p. 156-172 17 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Bearings (structural)
Wear of materials
Coordinate measuring machines
Geometry
Gages

On-machine metrology for hybrid machining

Jiang, X., Gao, F., Martin, H., Williamson, J. & Li, D., 19 Jun 2018, Hybrid Machining: Theory, Methods, and Case Studies. Luo, X. & Qin, Y. (eds.). Elsevier, p. 239-266 28 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Machining
Interferometry
Calibration
Surface measurement
Time measurement

Testing and PLM: Connecting Process and Product Models in Product Development

Tahera, K. & Earl, C., 2 Nov 2018, Product Lifecycle Management : Terminology and Applications. Udroiu, R. & Bere, P. (eds.).

Research output: Chapter in Book/Report/Conference proceedingChapter

Open Access
Management process
Product development
Testing
Product lifecycle management
Integrated

The Enterprise Showcase Experience

Allen, G. & Mavromihales, M., 22 Sep 2018, Higher Education Computer Science: A Manual of Practical Approaches . Carter, J., Rosen, C. & O'Grady, M. (eds.). Springer Nature, p. 173-186

Research output: Chapter in Book/Report/Conference proceedingChapter

Students
Industry
Feedback
2017
5 Citations (Scopus)

Interferometry for Online/In-Process Surface Inspection

Gao, F., 15 Feb 2017, Optical Interferometry. Banishev, A. A., Bhowmick, M. & Wang, J. (eds.). InTech, p. 41-59 18 p. Chapter 3

Research output: Chapter in Book/Report/Conference proceedingChapter

Open Access
inspection
interferometry
interferometers
vibration
shot

Rotor Loss Reduction Using Segmented Inverter in Surface-Mounted Permanent Magnet Drive

Al-ani, M., Barrans, S. & Carter, J., 8 Aug 2017, Proceedings of the 2017 IEEE International Electric Machines and Drives Conference (IEMCD) 2017. Institute of Electrical and Electronics Engineers Inc., 5 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Open Access
Permanent magnets
Rotors
Modulation
Phase shift
Eddy currents

Spatial Databases: An overview

Samson, G., Lu, Z., Usman, M. & Xu, Q., Feb 2017, Ontologies and Big Data Considerations for Effective Intelligence. Lu, J. & Xu, Q. (eds.). Hershey PA: IGI Global, p. 111-149 39 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

spatial data
index
attribute
2016

Level-set method for microscale flows

Yap, Y. F., Chai, J. C., Wong, T. N. & Nguyen, N. T., 19 Apr 2016, Microfluidics and Nanofluidics Handbook: Fabrication, Implementation, and Applications. Mitra, S. K. & Chakraborty, S. (eds.). 1st ed. Boca Raton: CRC Press, p. 175-193 19 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

microbalances
Numerical methods
readers
scalars

Numerical analysis of a railway compartment fire

Enbaya, A-A-F., Asim, T., Mishra, R. & Raj Rao, B. K. N., 2016, Current Trends in Reliability, Availability, Maintainability and Safety: An Industry Perspective . Kumar, U., Ahmadi, A., Verma, A. K. & Varde, P. (eds.). Springer Verlag, p. 471-484 14 p. (Lecture Notes in Mechanical Engineering).

Research output: Chapter in Book/Report/Conference proceedingChapter

Numerical analysis
Fires
Smoke
Computational fluid dynamics
Air

Overview of wireless techniques

Glover, I. A. & Atkinson, R., 24 Aug 2016, Wireless MEMS Networks and Applications. Elsevier Inc., p. 1-33 33 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Network protocols
Telecommunication links
Radio links
Medium access control
Flow control

Preliminary assessment of the irradiation behaviour of the FeCrMnNi High-Entropy Alloy for nuclear applications

Edmondson, P. D., Tunes, M. A., Harrison, R., Greaves, G., Hinks, J. & Donnelly, S., Nov 2016, Fusion Materials Research at Oak Ridge National Laboratory in Fiscal Year 2016. Wiffen, F. W., Katoh, Y. & Melton, S. (eds.). Oak Ridge, Tennessee: US Department of Energy, p. 63-66 4 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Open Access
entropy
irradiation
radiation tolerance
ion irradiation
ion accelerators
1 Citation (Scopus)

The distortion paradox: Analyzing contemporary metal production

Mynett, M., 22 Mar 2016, Global Metal Music and Culture: Current Directions in Metal Studies. Taylor and Francis Inc., p. 68-88 21 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

2015
1 Citation (Scopus)

Design and Optimization of Wideband Log-Periodic Dipole Arrays under Requirements for High Gain, High Front-to-Back Ratio, Optimal Gain Flatness, and Low Side Lobe Level: The Application of Invasive Weed

Zaharis, Z. D., Lazaridis, P. I., Skeberis, C., Mastorakis, G., Mavromoustakis, C. X., Pallis, E., Stratakis, D. I. & Xenos, T. D., 18 Nov 2015, Wireless Network Performance Enhancement Via Directional Antennas: Models, Protocols, and Systems. Matyjas, J. D., Hu, F. & Kumar, S. (eds.). CRC Press, p. 21-61 41 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

flatness
high gain
lobes
dipoles
broadband

Optimising Measurement Processes Using Automated Planning

Parkinson, S., Crampton, A. & Longstaff, A., Jun 2015, Advanced Mathematical and Computational Tools in Metrology and Testing X. Pavese, F., Bremser, W., Chunovkina, A., Fischer, N. & Forbes, A. B. (eds.). World Scientific, Vol. 86. p. 286-292 7 p. (Advances in Mathematics for Applied Sciences; vol. 86).

Research output: Chapter in Book/Report/Conference proceedingChapter

Planning
Time measurement
Machine tools
Calibration
Uncertainty

Simulation of Drops on Surfaces

Wilson, M. C. T. & Kubiak, K. J., 18 Dec 2015, Fundamentals of Inkjet Printing: The Science of Inkjet and Droplets. Hoath, S. D. (ed.). Wiley-VCH Verlag GmbH & Co. KGaA, p. 281-312 32 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Contact Angle
Diffuse Interface
Predictive Modeling
Contact Line
Simulation
2013
15 Citations (Scopus)

Characterisation of individual areal features

Senin, N. & Blunt, L., 1 Jun 2013, Characterisation of Areal Surface Texture. Leach, R. (ed.). Springer-Verlag Berlin Heidelberg, p. 179-216 38 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Textures
Reverse engineering
Surface topography
Computer vision
Computer aided design

Overview of wireless techniques for use with MEMS

Glover, I. A. & Atkinson, R., 31 Aug 2013, Handbook of Mems for Wireless and Mobile Applications. Elsevier Inc., p. 30-66 37 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

MEMS
Network protocols
Telecommunication links
Radio links
Medium access control
2010

Intelligent Equalisation Principles and Techniques for Minimising Masking when Mixing the Extreme Modern Metal Genre

Mynett, M., Wakefield, J. & Till, R., 1 Feb 2010, Heavy Fundamentalisms: Music, Metal and Politics. Spracklen, K. & Hill, R. (eds.). Inter-Disciplinary Press, p. 141-146

Research output: Chapter in Book/Report/Conference proceedingChapter

Metals
Acoustic waves
Masks
2008

Developing techniques for the dimensional assessment of true clinical wear in retrieved total joint replacements

Bills, P. J., Blunt, L. & Chakrabarty, G., 1 Jan 2008, Materials for Improved Wear Resistance of Total Artificial Joints. Igartua, A., Fuentes, E., Bayon, R. & Viteri, V. S. D. (eds.). Eibar, Spain: Tekniker, p. 109-118 10 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

2006

The use of CMM techniques to assess the wear of total knee replacements

Blunt, L., Bills, P. J., Hardaker, C. & Pantelis, C., 1 Aug 2006, Nordtrib 2006 - The 12th Nordic Symposium on Tribology. Lyngby, Denmark: DTU Tryk, p. 61 1 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

2003
17 Citations (Scopus)

Applications of Numerical Parameters and Filtration

Blunt, L. & Jiang, X., 2003, Advanced Techniques for Assessment Surface Topography: Development of a Basis for 3D Surface Texture Standards "SURFSTAND". Blunt, L. & Jiang, X. (eds.). Elsevier Inc., p. 221-247 27 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Wear of materials
Surface topography
Bone cement
Ultrahigh molecular weight polyethylenes
Engineers
2 Citations (Scopus)

Future Developments in Surface Metrology

Blunt, L., Jiang, X. & Scott, P. J., 6 Jun 2003, Advanced Techniques for Assessment Surface Topography: Development of a Basis for 3D Surface Texture Standards "SURFSTAND". Blunt, L. & Jiang, X. (eds.). Elsevier Inc., p. 339-347 9 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

metrology
Global positioning system
textures
Textures
requirements
69 Citations (Scopus)

Numerical Parameters for Characterisation of Topography

Blunt, L. & Jiang, X., 2003, Advanced Techniques for Assessment Surface Topography: Development of a Basis for 3D Surface Texture Standards "SURFSTAND". Blunt, L. & Jiang, X. (eds.). Elsevier Inc., p. 17-41 25 p.

Research output: Chapter in Book/Report/Conference proceedingChapter

Topography
Drawing (graphics)
Textures
Communication
Feature extraction