Department of Engineering and Technology

Research Output 1982 2019

Filter
Conference contribution
2019

A novel design of a 10-dipole log-periodic antenna with LTE-800 and GSM-900 band rejection

Mistry, K., Lazaridis, P., Hong Lo, T., Zaharis, Z. D., Glover, I. & Liu, B., 3 Feb 2019, (Accepted/In press) 2019 IEEE MTT-S International Conference on Numerical Electromagnetic and Multiphysics Modeling and Optimization (NEMO). Institute of Electrical and Electronics Engineers Inc.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Log periodic antennas
Dipole antennas
Global system for mobile communications
Antennas
Costs

BowTies for the Digital transformation safety management systems

Van Gulijk, C. & McCullogh, P., 21 Jan 2019, (Accepted/In press) HAZARDS 29: IchemE. Derby, Vol. Hazards 29.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hazards
Industry
Big data

Core Temperature Measurement in Subtractive Manufacturing Processes

Olabode, O. F., Fletcher, S., Longstaff, A. & Mian, N., Jan 2019, (Accepted/In press) Lamdamap 13th International Conference & Exhibition: 13th -14th March 2019, AMRC, UK.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Temperature measurement
Acoustic wave velocity
Temperature
Ultrasonics
Machine tools

Increasing compressor wheel fatigue life through residual stress generation

Barrans, S., Allport, J. & Thompson, A., 1 Jan 2019, Advances in Manufacturing Engineering and Materials: Proceedings of the International Conference on Manufacturing Engineering and Materials (ICMEM 2018). Hloch, S., Klichová, D., Krolczyk, G. M., Chattopadhyaya, S. & Ruppenthalová, L. (eds.). Springer Verlag, p. 375-385 11 p. (Lecture Notes in Mechanical Engineering).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Residual stresses
Wheels
Fatigue of materials
Compressive stress

Open Area Concealed Weapon Detection Sensor System Development

Huang, Y., Mather, P. J. & Sibley, M. J. N., 3 Jan 2019, 2018 Progress In Electromagnetics Research Symposium, PIERS-Toyama 2018 - Proceedings. Institute of Electrical and Electronics Engineers Inc., Vol. 2018-August. p. 611-620 10 p. 8598210

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Signal analysis
Sensors
Innovation

Provision of Frequency Support by Wind Power Plants: Assessment of Compliance with Grid Codes

Attya, A., 8 Mar 2019, (Accepted/In press) IEEE PowerTech 2019. IEEE

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wind power
Power plants
Acceptance tests
Kinetic energy
Wind turbines

ProxSynity: A Real-Time, Networked, Performance System

Gibson, I., 16 Mar 2019, (Accepted/In press) Proceedings of the International Computer Music Conference 2019.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2018

1.62GHz Circularly Polarized Pin-Fed Notched Circular Patch Antenna

Tziris, E. N., Lazaridis, P. I., Mistry, K. K., Zaharis, Z. D., Cosmas, J. P., Liu, B. & Glover, I. A., 27 Sep 2018, 2018 2nd URSI Atlantic Radio Science Meeting, AT-RASC 2018. Institute of Electrical and Electronics Engineers Inc., 3 p. 8471447

Research output: Chapter in Book/Report/Conference proceedingConference contribution

antenna design
patch antennas
Antenna feeders
Microstrip antennas
Antennas

A computer leaning approach to obtain safety information from multi-lingual accident reports

Hughes, P., Figueres Esteban, M., El Rashidy, R., Van Gulijk, C. & Slovak, R., 18 Jun 2018, Safety and Reliability - Safe Societies in a Changing World - Proceedings of the 28th International European Safety and Reliability Conference, ESREL 2018: Proceedings of ESREL 2018, June 17-21, 2018, Trondheim, Norway. van Gulijk, C., Haugen, S., Barros, A., Vinnem, J. E. & Kongsvik, T. (eds.). CRC Press / Balkema, Taylor and Francis group, p. 3107-3114 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
Accidents
Ontology

Adaptive collimator design for future particle accelerators

Furness, T., Fletcher, S., Williamson, J., Bertarelli, A., Carra, F., Pasquali, M., Gentini, L. & Redaelli, S., 2018, (Accepted/In press) 7th International Beam Instrumentation Conference: 2018 IBIC. Vol. 187. p. 240-244 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
particle accelerators
collimators
collimation
cleaning
specifications

A Design of Elliptical Edge-Fed Circularly Polarized Patch Antenna for GPS and Iridium Applications

Mistry, K. K., Lazaridis, P. I., Tziris, E. N., Zaharis, Z. D., Liu, B., Xenos, T. D. & Glover, I. A., 27 Sep 2018, 2018 2nd URSI Atlantic Radio Science Meeting, AT-RASC 2018. Institute of Electrical and Electronics Engineers Inc., 4 p. 8471443

Research output: Chapter in Book/Report/Conference proceedingConference contribution

patch antennas
Iridium
Antenna feeders
Microstrip antennas
iridium

Advanced techniques for robotic polishing of aluminum mirrors

Li, H., Walker, D., Zheng, X., Yu, G., Reynolds, C., Zhang, W. & Li, T., 15 Jun 2018, Optical Fabrication, Testing, and Metrology VI. Schröder, S. & Geyl, R. (eds.). SPIE, 13 p. 106920N. (Proceedings of SPIE; vol. 10692).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
Polishing
robotics
Aluminum
polishing
Robotics

Analysing Railway Safety with Systems Thinking

Zhang, Y., Ge, X., Yang, W. & Guo, J., 13 Mar 2018, ICRT 2017: Railway Development, Operations, and Maintenance - Proceedings of the 1st International Conference on Rail Transportation 2017. American Society of Civil Engineers (ASCE), p. 464-475 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
German Federal Railways
Accidents
Computer operating procedures
Fault tree analysis
Systems engineering

Analytical expressions for tuned feedback front end baseband optical receiver

Taha, K. G., Sibley, M. J. N., Mather, P. J., Al-Nedawe, B. M. & Farhat, Z. A., 8 Jan 2018, 2017 25th Telecommunications Forum (TELFOR). Institute of Electrical and Electronics Engineers Inc., 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Optical receivers
Feedback
Bandwidth
Photodiodes
Transfer functions

An electrically assisted turbocharger system for Formula Student

Allport, J. & Latif, R., 12 Jul 2018, (Accepted/In press) Proceedings of the 4th Biennial International Conference on Powertrain Modelling and Control, Testing, Mapping and Calibration.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Torque
Leveling (machinery)
Students
Engines
Motorcycles
2 Citations (Scopus)

An Investigation into Spatial Attributes of 360° Microphone Techniques for Virtual Reality

Millns, C. & Lee, H., 14 May 2018, Proceedings of 144th AES International Convention. Audio Engineering Society, Convention Paper 10005

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
virtual reality
attribute
test

An investigation of a single shot dual wavelength polarised interferometer which uses Carre and Four Step Phase Shift Algorithms

Al-Bashir, S., Muhamedsalih, H., Gao, F. & Jiang, X., 5 Jun 2018, European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 18th International Conference and Exhibition, EUSPEN 2018. Riemer, O., Savio, E., Billington, D., Leach, R. K. & Phillips, D. (eds.). euspen, p. 113-114 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
shot
phase shift
interferometers
wavelengths
ambiguity

An Optimal Design of Printed Log-Periodic Antenna for L-Band EMC Applications

Mistry, K. K., Lazaridis, P. I., Zaharis, Z. D., Xenos, T. D., Tziris, E. N. & Glover, I. A., 25 Jun 2018, 2018 IEEE International Symposium on Electromagnetic Compatibility and 2018 IEEE Asia-Pacific Symposium on Electromagnetic Compatibility, EMC/APEMC 2018. Institute of Electrical and Electronics Engineers Inc., p. 1150-1155 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
log periodic antennas
Log periodic antennas
electromagnetic compatibility
Electromagnetic compatibility
ultrahigh frequencies

A Novel Hyper-Crossing Tool Path Generation Algorithm for Sub-Aperture Polishing

Reynolds, C., Walker, D., Yu, G. & Li, H., 10 Jul 2018, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation III. SPIE, Vol. 10706. 11 p. 107060F

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Tool Path Generation
Polishing
Tool Path
polishing
apertures

A practical method for simulating the evolution of railway wheel polygonalization

Peng, B., Iwnicki, S., Shackleton, P., Zhao, Y. & Cui, D., 22 Jan 2018, The Dynamics of Vehicles on Roads and Tracks: Proceedings of the 25th International Symposium on Dynamics of Vehicles on Roads and Tracks (IAVSD 2017), 14-18 August 2017, Rockhampton, Queensland, Australia. Spiryagin, M., Gordon, T., Cole, C. & McSweeney, T. (eds.). 1st ed. Queensland, Australia, Vol. 2. p. 753-758 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wheels
Wear of materials

A Supervisory System for Partial Discharge Monitoring

Saeed, B., Upton, D., Vieira, M. D. F. Q., Torres, F., Mohamed, H., Mistry, K., Mather, P., Lazaridis, P., Khan, U., Tachtatzis, C., Atkinson, R., Judd, M. & Glover, I., 20 Feb 2018, (Accepted/In press) 2nd URSI Atlantic Radio Science Conference (URSI AT-RASC). 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
Partial discharges
Monitoring
Sensors
Wireless networks
Visualization
1 Citation (Scopus)

A Survey on Relay Selection in Cooperative Device-to-Device (D2D) Communication for 5G Cellular Networks

Kumarapandian, S. & Sibley, M. J. N., 19 Jun 2018, 2017 International Conference on Energy, Communication, Data Analytics and Soft Computing, ICECDS 2017. Institute of Electrical and Electronics Engineers Inc., p. 42-46 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Communication
Time delay
Feedback
Degradation
Node

Automated train driver competency performance indicators using real train driving data

El Rashidy, R., Hughes, P., Figueres Esteban, M. & Van Gulijk, C., 15 Jun 2018, Safety and Reliability – Safe Societies in a Changing World: Proceedings of ESREL 2018, June 17-21, 2018, Trondheim, Norway. Haugen, S., Barros, A., van Gulijk, C., Kongsvik, T. & Vinnem, J. E. (eds.). 1st ed. London: CRC Press/Balkema, p. 3071-3075 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
Alarm systems
Brakes
Controllers

Automixing of multitrack material using modified loudness models

Fenton, S., 7 Oct 2018, 145th AES Convention: AES Convention Papers. Andreopoulou, A. & Boren, B. (eds.). Audio Engineering Society, 7 p. 10041

Research output: Chapter in Book/Report/Conference proceedingConference contribution

BESS Techno-economic challenges to support wind energy: Mind mapping and correlation matrix

Attya, A., Dhimish, M. & Schofield, N., 13 Dec 2018, Proceedings - 2018 IEEE PES Innovative Smart Grid Technologies Conference Europe, ISGT-Europe 2018. IEEE, 8571465

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
Energy storage
Wind power
Economics
Industry

Characterisation of powder-filled defects in additive manufactured surfaces using X-ray CT

Tawfik, A., Bills, P., Blunt, L. & Racasan, R., 1 Feb 2018, 8th Conference on Industrial Computed Tomography. 8 p. (Open Access Database of Nondestructive Testing).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
Powders
X rays
Defects
3D printers
Inspection
1 Citation (Scopus)

Characterization of Material Loss from Femoral Stem Taper Surfaces through Development of a Responsive Morphological Filtering Technique

Dransfeld, K., Racasan, R., Blunt, L. & Bills, P., Jun 2018, Beyond the Implant: Retrieval Analysis Methods for Implant Surveillance. Mihalko, W. M., Lemons, J. E., Greenwald, A. S. & Kurtz, S. M. (eds.). ASTM International, Vol. STP 1606. p. 173-190 18 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Arthroplasty
Diamond
Topography
Diamonds

Determination of the Convective Heat Transfer Coefficient of Nanofluids

Liu, L., Stetsyuk, V., Kubiak, K., Fatt, Y. Y., Goharzadeh, A. & Chai, J., 30 Apr 2018, (Accepted/In press) Proceedings of the 16th International Heat Transfer Conference, IHTC-16. 9 p. IHTC16-24177

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat transfer coefficients
Nanoparticles
Flow rate
Fluids
Water

Deterministic fabrication of surface micro-step features using a facet diamond cutting tool

Tong, Z., Jiang, X. & Blunt, L., 5 Jun 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN): June 4th-8th 2018, Venice, IT. Riemer, O., Savio, E., Billington, D., Leach, R. K. & Phillips, D. (eds.). euspen, p. 91-92 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
Diamond cutting tools
Fabrication
Cutting tools
Brass
Focused ion beams

Developing an Inerter Model using Multibody Dynamics Software for Railway Vehicle Applications

Zhao, Y., Tucker, G., Goodall, R., Iwnicki, S., Jaing, J. Z. & Smith, M., 22 Jan 2018, Dynamics of Vehicles on Roads and Tracks: Proceedings of the 25th International Symposium on Dynamics of Vehicles on Roads and Tracks (IAVSD 2017), 14-18 August 2017, Rockhampton, Queensland, Australia. Spiryagin, M., Gordon, T., Cole, C. & McSweeney, T. (eds.). CRC Press, Vol. 2. p. 1267-1272

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Vehicle suspensions
Software packages
Computer simulation

Developing a wheel motor controller for an actively steered bogie using co-simulation

Zhao, Y., Goodall, R., Stow, J., Cooney, N. & Hawley, J., 22 Jan 2018, The Dynamics of Vehicles on Roads and Tracks: Proceedings of the 25th International Symposium on Dynamics of Vehicles on Roads and Tracks. Spiryagin, M., Gordon, T., Cole, C. & McSweeney, T. (eds.). CRC Press/Balkema, Vol. 2. p. 723-727 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wheels
Controllers
Axles

Development of an AM artefact to characterize unfused powder using computer tomography

Tawfik, A., Bills, P., Blunt, L. & Racasan, R., 5 Jun 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN): June 4th-8th 2018, Venice, IT. Riemer, O., Savio, E., Billington, D., Leach, R. K. & Phillips, D. (eds.). euspen, p. 97-98 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
3D printers
Tomography
Powders
Defects
Porosity

Development of a Real-time Punch Meter Plugin

Parker, A., Fenton, S. & Lee, H., Sep 2018, Proceedings of the 4th Workshop on Intelligent Music Production. University of Huddersfield

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File

Dynamic Testing and Characterization of Advanced Materials in a New Experiment at CERN HiRadMat Facility

Bertarelli, A., Accettura, C., Berthomé, E., Bianchi, L., Carra, F., Fichera, C., Frankl, M., Gobbi, G., Grosclaude, P., Valenzuela, J., Guinchard, M., Lechner, A., Pasquali, M., Redaelli, S., Rigutto, E., Sacristan de Frutos, O., Bolz, P., Simon, P., Furness, T., Mollicone, P. & 1 othersPortelli, M., Jun 2018, 9th International Particle Accelerator Conference . Joint Accelerator Conferences Website (JACoW), p. 2534-2537 4 p. WEPMF071

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
coatings
vibration meters
strain gages
particle beams
temperature sensors

Effect of Solar Heat Flux and Thermal Loading on the Flow Distribution within the Riser Pipes of a Closed-Loop Solar Thermo-syphon Hot Water System

Freegah, B., Asim, T., Mishra, R. & Ubbi, K., Sep 2018, 28th International Congress on Condition Monitoring and Diagnostic Engineering Management. p. 398-405 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Siphons
Heat flux
Pipe
Water
Solar energy

Elicitation and Quantitative Analysis of User Requirements for Audio Mixing Interface

Dewey, C. & Wakefield, J., 14 May 2018, 144th Audio Engineering Society European Convention. Audio Engineering Society, 9 p. 9935

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Chemical analysis
Feedback
Visualization
Students
Experiments

Enabling the optimisation of the primary suspension with passive components for an industrial railway vehicle model

Lewis, T., Li, Y., Jiang, J. Z., Neild, S. A., Tucker, G., Iwnicki, S., Goodall, R. & Smith, M., 17 Sep 2018, Proceedings of ISMA 2018 - International Conference on Noise and Vibration Engineering and USD 2018 - International Conference on Uncertainty in Structural Dynamics. Moens, D., Desmet, W., Pluymers, B. & Rottiers, W. (eds.). KU Leuven - Departement Werktuigkunde, p. 3269-3281 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

vehicles
industries
optimization
passengers
comfort

Extension of an Analytical Method for Novel Volute Design

Baker, P., 25 Sep 2018, (Accepted/In press) 14th IEEE International Conference on Emerging Technologies, ICET 2018. IEEE, 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
Fans
Conservation

Feature Extraction of Binaural Recordings for Acoustic Scene Classification

Zieliński, S. & Lee, H., 1 Jul 2018, (Accepted/In press) IEEE Federated Conference on Computer Science and Information Systems, FedCSIS 2018. IEEE

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
acoustics
artificial intelligence
multimedia
method

FPGA-based Fault-injection and Data Acquisition of Self-repairing Spiking Neural Network Hardware

Karim, S., Harkin, J., McDaid, L., Gardiner, B., Liu, J., Halliday, D., Tyrrell, A., Timmis, J., Millard, A. & Johnson, A., 4 May 2018, 2018 IEEE International Symposium on Circuits and Systems (ISCAS). IEEE, 5 p. 8351512

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Field programmable gate arrays (FPGA)
Data acquisition
Neurons
Neural networks
Hardware

Fundaments of measurement for computationally-intensive metrology

Scott, P., Dec 2018, Advanced mathematical and computational tools in metrology and testing XI. Forbes, A., Zhang, N., Chunovkina, A., Eichstadt, S. & Pavese, F. (eds.). World Scientific Publishing Co. Pte Ltd, Vol. 89. p. 119-127 9 p. (Series on Advances in Mathematics for Applied Sciences; vol. 89).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

metrology
computer programs
scanners
mathematical models
interferometers

Grid-based Stage Paradigm with Equalisation Extension for ‘Flat’ Mix Production

Wakefield, J., Dewey, C. & Gale, W., May 2018, 144th Audio Engineering Society European Convention. Audio Engineering Society, 10 p. 9930

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Visualization

Impact of Impeller Casing Treatment on the Acoustics of a Small High Speed Centrifugal Compressor

Sharma, S., García-Tíscar, J., Allport, J., Jupp, M. & Nickson, A., Jun 2018, ASME Turbo Expo 2018 : Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers (ASME), Vol. 2B: Turbomachinery. GT2018-76815

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal compressors
Compressors
Acoustics
Aerodynamic stability
Ducts

Implementation of the water induced low adhesion creep force model (wilac) into the low adhesion braking dynamic optimisation for rolling stock model (Labrador)

Alturbeh, H., Lewis, R., Six, K., Trummer, G. & Stow, J., 27 Sep 2018, Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018. Nunez, A. & Li, Z. (eds.). TU Delft, p. 37-43 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dynamic Optimization
Creep
Adhesion
Braking
Water

Incorporating incident reports in bow-ties with Big Data techniques

Van Gulijk, C., Figueres Esteban, M., Hughes, P. & McCullogh, P., 1 May 2018, Hazards 28 Conference Proceedings. 163 ed. ImechE, Vol. 2018-May. 9 p. (Institution of Chemical Engineers Symposium Series).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
Chemical industry
Ontology
Industry
Big data

In-situ areal inspection of powder bed for electron beam fusion AM system based on fringe projection

Liu, Y., Zhang, Z., Blunt, L., Saunby, G., Dawes, J., Blackham, B., Rahman, H. A., Smith, C., Gao, F. & Jiang, X., 2018, Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing. American Society for Precision Engineering, ASPE, p. 259-264 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Invasive weed optimized planar elliptical dipole antenna for ultra-wideband EMC applications

Tziris, E. N., Cosmas, J. P., Lazaridis, P. I., Mistry, K. M., Glover, I. A., Zaharis, Z. D. & Xenos, T. D., 25 Jun 2018, 2018 IEEE International Symposium on Electromagnetic Compatibility and 2018 IEEE Asia-Pacific Symposium on Electromagnetic Compatibility, EMC/APEMC 2018. Institute of Electrical and Electronics Engineers Inc., p. 233-236 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

boresights
dipole antennas
Dipole antennas
Electromagnetic compatibility
Ultra-wideband (UWB)

Investigation into the impact of span-wise flow distribution on the performance of a mixed flow turbine

Lee, S., Barrans, S., Jupp, M. & Nickson, A., 11 Jun 2018, ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers (ASME), Vol. 2B-2018. 12 p. GT2018-76992

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Turbines
Engines
Inlet flow
Fibers
Axial flow

Investigation of kinematics error influence on on-machine measurement for ultra-precision turning

Li, D., Tong, Z., Blunt, L., Ding, F. & Jiang, X., 5 Jun 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN): June 4th-8th 2018, Venice, IT. Riemer, O., Savio, E., Billington, D., Leach, R. K. & Phillips, D. (eds.). euspen, p. 143-144 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
Kinematics
Measurement errors
Machine tools
Interferometers
Diamonds

Localization of Partial Discharge by Using Received Signal Strength

Saeed, B., Lazaridis, P., Mohamed, H., Upton, D., Mistry, K., Mather, P., Vieira, M. D. F. Q., Atkinson, R., Tachtatzis, C. & Glover, I., 20 Feb 2018, (Accepted/In press) 2nd URSI Atlantic Radio Science Conference Proceedings. 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
Partial discharges
Insulation
Wireless sensor networks
Cracks
Defects