School of Computing and Engineering

  • United Kingdom

Research Output

Filter
Article
2019
Open Access
File
4 Citations (Scopus)

Development and Assessment of Two-Stage Thermoacoustic Electricity Generator

Hamood, A., Jaworski, A. J. & Mao, X., 11 May 2019, In : Energies. 12, 9, p. 1-18 18 p., 1790.

Research output: Contribution to journalArticle

Open Access
File
2 Citations (Scopus)

Development of a Novel Methodology for Calculating the Thermal Efficiency of Clean Fuel Boilers based on Error Analysis Method

liu, X., asim, T., Zhu, G., Zhang, Y. & Mishra, R., 2 Aug 2019, In : International Journal of COMADEM. 22, 2, p. 5-9

Research output: Contribution to journalArticle

Open Access
File
Open Access
4 Citations (Scopus)

Development of Novel Solar Cell Micro Crack Detection Technique

Dhimish, M. & Mather, P., 2 Aug 2019, In : IEEE Transactions on Semiconductor Manufacturing. 32, 3, p. 277 -285 9 p.

Research output: Contribution to journalArticle

Open Access
File
3 Citations (Scopus)

Development of the FE In-House Procedure for Creep Damage Simulation at Grain Boundary Level

Xu, Q., Tu, J. & Lou, Z., 5 Jun 2019, In : Metals. 9, 6, p. 1-24 24 p., 656.

Research output: Contribution to journalArticle

Open Access
4 Citations (Scopus)

Digital Forensic Investigation of Social Media, Acquisition and Analysis of Digital Evidence

Montasari, R., Hill, R., Carpenter, V. & Montaseri, F., 2019, In : International Journal of Strategic Engineering (IJoSE) . 2, 1, p. 52-60 9 p.

Research output: Contribution to journalArticle

Digital Forensics: Challenges and Opportunities for Future Studies

Montasari, R., Hill, R., Parkinson, S., Peltola, P., Hosseinian-Far, A. & Daneshkhah, A., 26 Sep 2019, (Accepted/In press) In : International Journal of Organizational and Collective Intelligence. 10, 2

Research output: Contribution to journalArticle

Discovering and utilising expert knowledge from security event logs

Khan, S. & Parkinson, S., 1 Oct 2019, In : Journal of Information Security and Applications. 48, p. 1-22 22 p., 102375.

Research output: Contribution to journalArticle

Dombi power partitioned Heronian mean operators of q-rung orthopair fuzzy numbers for multiple attribute group decision making

Zhong, Y., Gao, H., Guo, X., Qin, Y., Huang, M. & Luo, X., 22 Oct 2019, In : PLoS One. 14, 10, 37 p., e0222007.

Research output: Contribution to journalArticle

Open Access

Droplet Misalignment Limit for Inkjet Printing into Cavities on Textured Surfaces

Jackson, F. F., Kubiak, K. J., Wilson, M. C. T., Molinari, M. & Stetsyuk, V., 23 Jul 2019, In : Langmuir. 35, 29, p. 9564-9571 8 p.

Research output: Contribution to journalArticle

Dual-channel CNN for efficient abnormal behavior identification through crowd feature engineering

Xu, Y., Lu, L., Xu, Z., He, J., Zhou, J. & Zhang, C., Jul 2019, In : Machine Vision and Applications. 30, 5, p. 945-958 14 p.

Research output: Contribution to journalArticle

Open Access
File
3 Citations (Scopus)

Dynamic analysis and performance of a repoint track switch

Bezin, Y., Sarmiento-carnevali, M. L., Sichani, M. S., Neves, S., Kostovasilis, D., Bemment, S. D., Harrison, T. J., Ward, C. P. & Dixon, R., 9 May 2019, In : Vehicle System Dynamics. 21 p.

Research output: Contribution to journalArticle

Open Access
File
Open Access
File

Dynamic mode decomposition of the acoustic field in radial compressors

Broatch, A., García-Tíscar, J., Roig, F. & Sharma, S., Jul 2019, In : Aerospace Science and Technology. 90, p. 388-400 13 p.

Research output: Contribution to journalArticle

Open Access
File
13 Citations (Scopus)

Dynamic modeling and chatter analysis of a spindle-workpiece-tailstock system for the turning of flexible parts

Lu, K., Wang, Y., Gu, F., Pang, X. & Ball, A., 1 Oct 2019, In : International Journal of Advanced Manufacturing Technology. 104, 5-8, p. 3007-3015 9 p.

Research output: Contribution to journalArticle

Dynamic Modeling and Structural Optimization of a Bistable Electromagnetic Vibration Energy Harvester

Zhang, B., Zhang, Q., Wang, W., Han, J., Tang, X., Gu, F. & Ball, A. D., 23 Jun 2019, In : Energies. 12, 12, p. 1-19 19 p., 2410.

Research output: Contribution to journalArticle

Open Access

Dynamic Response of Advanced Materials Impacted by Particle Beams: The MultiMat Experiment

Pasquali, M., Bertarelli, A., Accettura, C., Berthome, E., Bianchi, L., Bolz, P., Carra, F., Fichera, C., Frankl, M. I., Furness, T., Gobbi, G., Grosclaude, P., Guardia-Valenzuela, J., Guinchard, M., Jedrychowsky, M. D., Harden, F. J., Lechner, A., Mollicone, P., Pastuszak, P. D., Portelli, M. & 4 others, Redaelli, S., Rigutto, E., de Frutos, O. S. & Simon, P., 15 Sep 2019, In : Journal of Dynamic Behavior of Materials. 5, 3, p. 266-295 30 p.

Research output: Contribution to journalArticle

Open Access
2 Citations (Scopus)

Edge control in precision robotic polishing based on space-variant deconvolution

Wan, S., Zhang, X., Wang, W., Xu, M. & Jiang, X., Jan 2019, In : Precision Engineering. 55, p. 110-118 9 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)

Effective Crowd Anomaly Detection Through Spatio-temporal Texture Analysis

Hao, Y., Xu, Z., Liu, Y., Wang, J. & Fan, J., Feb 2019, In : International Journal of Automation and Computing. 16, 1, p. 27-39 13 p.

Research output: Contribution to journalArticle

Open Access
File
2 Citations (Scopus)

Effect of foam copper interlayer on the mechanical properties and fretting wear of sandwich clinched joints

Lei, L., He, X., Xing, B., Zhao, D., Gu, F. & Ball, A., Dec 2019, In : Journal of Materials Processing Technology. 274, 10 p., 116285.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Effect of preparation method on the surface properties and UV imaging of indomethacin solid dispersions

Asare-Addo, K., Totea, A-M., Mawla, N., Walton, K., Taheri, S., Ward, A., Adebisi, A., Al Shafiee, M., Timmins, P. & Conway, B., 1 Apr 2019, In : European Journal of Pharmaceutics and Biopharmaceutics. 137, p. 148-163 16 p.

Research output: Contribution to journalArticle

Open Access
File
5 Citations (Scopus)

Effect of the nonlinear displacement-dependent characteristics of a hydraulic damper on high-speed rail pantograph dynamics

Wang, W., Liang, Y., Zhang, W. & Iwnicki, S., 1 Mar 2019, In : Nonlinear Dynamics. 95, 4, p. 3439-3464 26 p., NODY-D-18-01832R1.

Research output: Contribution to journalArticle

Open Access
File
1 Citation (Scopus)
Open Access
File
2 Citations (Scopus)

Effects of 3d electron configurations on helium bubble formation and void swelling in concentrated solid-solution alloys

Zhang, Y., Wang, X., Osetsky, Y. N., Tong, Y., Harrison, R., Donnelly, S. E., Chen, D., Wang, Y., Bei, H., Sales, B. C., More, K. L., Xiu, P., Wang, L. & Weber, W. J., 1 Dec 2019, In : Acta Materialia. 181, p. 519-529 11 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Effects of asymmetric flow within vaneless diffuser on the performance characteristics of the compressor stage of a turbocharger

Ahmed, N., Asim, T. & Mishra, R., 2 Aug 2019, In : International Journal of COMADEM. 22, 2, p. 39-57 18 p.

Research output: Contribution to journalArticle

Open Access
File

Effects of blade tapering on the performance of vertical axis wind turbines analysed through advanced visualization techniques

Zahariev, M., Asim, T., Mishra, R. & Nsom, B., 2 Aug 2019, In : International Journal of COMADEM. 22, 2, p. 69-74 6 p.

Research output: Contribution to journalArticle

Open Access
File

Effects of Bounded Uncertainties on the Dynamic Characteristics of an Overhung Rotor System with Rubbing Fault

Fu, C., Zhen, D., Yang, Y., Gu, F. & Ball, A., 15 Nov 2019, In : Energies. 12, 22, 15 p., 4365.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)
Open Access
File
2 Citations (Scopus)

Effects of the geometrical features of flow paths on the flow capacity of a control valve trim

Asim, T., Mishra, R., Oliveira, A. & Charlton, M., Jan 2019, In : Journal of Petroleum Science and Engineering. 172, p. 124-138 15 p.

Research output: Contribution to journalArticle

Open Access
File
4 Citations (Scopus)

Efficient phase retrieval of two-directional phase-shifting fringe patterns using geometric constraints of deflectometry

Niu, Z., Xu, X., Zhang, X., Wang, W., Zhu, Y., Ye, J., Xu, M. & Jiang, X., 18 Mar 2019, In : Optics Express. 27, 6, p. 8195-8207 13 p.

Research output: Contribution to journalArticle

Open Access
6 Citations (Scopus)

Enabling metrology-oriented specification of geometrical variability: A categorical approach

Qi, Q., Pagani, L., Jiang, X. & Scott, P., 25 Feb 2019, In : Advanced Engineering Informatics. 39, p. 347-358 12 p.

Research output: Contribution to journalArticle

Open Access
Open Access
File

Energy Efficient Mobility Enhancement in LTE Pico–Macro HetNet Systems

Khwandah, S. A., Cosmas, J. P., Lazaridis, P. I., Glover, I. A., Zaharis, Z. D. & Prasad, N. R., 1 Dec 2019, In : Wireless Personal Communications. 109, 3, p. 1491-1502 12 p.

Research output: Contribution to journalArticle

Open Access

Entropy-based method for evaluating spatial distribution of form errors for precision assembly

Zhang, Q., Zhang, Z., Jin, X., Zeng, W., Lou, S., Jiang, X. & Zhang, Z., 1 Nov 2019, In : Precision Engineering. 60, p. 374-382 9 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Estimating the impact of azimuth-angle variations on photovoltaic annual energy production

Dhimish, M. & Silvestre, S., 1 Mar 2019, In : Clean Energy - Oxford University Press. 3, 1, p. 47-58 12 p.

Research output: Contribution to journalArticle

Open Access
4 Citations (Scopus)

Evolution of radiation-induced lattice defects in 20/25 Nb-stabilised austenitic stainless steel during in-situ proton irradiation

Barcellini, C., Harrison, R. W., Dumbill, S., Donnelly, S. E. & Jimenez-Melero, E., Feb 2019, In : Journal of Nuclear Materials. 514, p. 90-100 11 p.

Research output: Contribution to journalArticle

Open Access
5 Citations (Scopus)

Experimental investigation of the flow structures over a 40° swept wing

Zhang, S., Jaworski, A. J., McParlin, S. C. & Turner, J. T., 27 Feb 2019, In : Aeronautical Journal. 123, 1259, p. 39-55 17 p.

Research output: Contribution to journalArticle

Open Access
File

Experimental Investigations on a Grate Incinerator of L-shaped Flame Fueled by Rural Solid Waste

Liu, X., Asim, T., Zhu, G., Zhang, Y. & Mishra, R., 2 Aug 2019, In : International Journal of COMADEM. 22, 2, p. 11-19 9 p.

Research output: Contribution to journalArticle

Open Access
File

Exploiting Bayesian networks for fault isolation: A diagnostic case study of diesel fuel injection system

Wang, J., Wang, Z., Stetsyuk, V., Ma, X., Gu, F. & Li, W., Mar 2019, In : ISA Transactions. 86, p. 276-286 11 p.

Research output: Contribution to journalArticle

Open Access
File
3 Citations (Scopus)
1 Citation (Scopus)

Extracting safety information from multi-lingual accident reports using an ontology-based approach

Hughes, P., Robinson, R., Figueres Esteban, M. & Van Gulijk, C., 1 Oct 2019, In : Safety Science. 118, p. 288-297 10 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Extraction of the largest amplitude impact transients for diagnosing rolling element defects in bearings

Hu, L., Zhang, L., Gu, F., Hu, N. & Ball, A., 1 Feb 2019, In : Mechanical Systems and Signal Processing. 116, p. 796-815 20 p.

Research output: Contribution to journalArticle

Open Access
File
3 Citations (Scopus)

Fabrication and characterisation of metal-doped pectin films

Kalathaki, I., Alba, J., Muhamedsalih, H. & Kontogiorgos, V., 1 Jul 2019, In : Food Hydrocolloids. 92, p. 259-266 8 p.

Research output: Contribution to journalArticle

Open Access
File
1 Citation (Scopus)

Fast and accurate mean-shift vector based wavelength extraction for chromatic confocal microscopy

Lu, W., Chen, C., Zhu, H., Wang, J., Leach, R., Liu, X., Wang, J. & Jiang, X., 4 Sep 2019, In : Measurement Science and Technology. 30, 11, p. 1-7 7 p., 115104.

Research output: Contribution to journalArticle

Fast hierarchical fusion model based on least squares B-splines approximation

Pagani, L., Wang, J., Colosimo, B. M., Jiang, X. & Scott, P. J., 1 Nov 2019, In : Precision Engineering. 60, p. 570-586 17 p.

Research output: Contribution to journalArticle

Open Access

Fast implementation of pattern mining algorithms with time stamp uncertainties and temporal constraints

Titarenko, S., Titarenko, V., Aivaliotis, G. & Palczewski, J., 13 May 2019, In : Journal of Big Data. 6, 1, p. 1-34 34 p., 37.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

Fault Detection for Closed-Loop Control Systems Based on Parity Space Transformation

Sun, B., Wang, J., He, Z., Qin, Y., Wang, D. & Zhou, H., 15 May 2019, In : IEEE Access. 7, p. 75153-75165 13 p., 8715502.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

Fault feature extraction for rolling element bearing diagnosis based on a multi-stage noise reduction method

Guo, J., Zhen, D., Li, H., Shi, Z., Gu, F. & Ball, A. D., Jun 2019, In : Measurement: Journal of the International Measurement Confederation. 139, p. 226-235 10 p.

Research output: Contribution to journalArticle

Open Access
File
10 Citations (Scopus)