• University of Huddersfield Queensgate Huddersfield HD1 3DH

    United Kingdom

20122020
If you made any changes in Pure these will be visible here soon.

Research Output 2012 2020

  • 13 Article
  • 9 Conference contribution
2020

An accurate instantaneous angular speed estimation method based on a dual detector setup

Zeng, Q., Feng, G., Shao, Y., Devitt, J., Gu, F. & Ball, A., 6 Feb 2020, In : Mechanical Systems and Signal Processing. 140, 16 p., 106674.

Research output: Contribution to journalArticle

Detectors
Rotors
Masks
Monitoring
Computer simulation

Locating Sensors in Complex Engineering Systems for Fault Isolation Using Population-Based Incremental Learning

Wang, J., Wang, Z., Ma, X., Feng, G. & Zhang, C., 8 Jan 2020, In : Energies. 13, 2, 14 p., 310.

Research output: Contribution to journalArticle

Open Access
Fault Isolation
Incremental Learning
Systems Engineering
Systems engineering
Fault
2019
4 Citations (Scopus)

A Performance Evaluation of Two Bispectrum Analysis Methods Applied to Electrical Current Signals for Monitoring Induction Motor-Driven Systems

Huang, B., Feng, G., Tang, X., Gu, J. X., Xu, G., Cattley, R., Gu, F. & Ball, A., 15 Apr 2019, In : Energies. 12, 8, 23 p., 1438.

Research output: Contribution to journalArticle

Open Access
Bispectrum
Induction Motor
Induction motors
Performance Evaluation
Rotors

Automated Quality Characterization for Composites Using Hybrid Ultrasonic Imaging Techniques

Sun, J., Chong, A. Y. B., Tavakoli, S., Feng, G., Kanfoud, J., Selcuk, C. & Gan, T. H., 4 Jul 2019, In : Research in Nondestructive Evaluation. 30, 4, p. 205-230 26 p.

Research output: Contribution to journalArticle

Ultrasonic imaging
hybrid composites
imaging techniques
ultrasonics
Imaging techniques

Investigation of induced charge mechanism on a rod electrode

Li, J., Li, J., Cheng, X. & Feng, G., 1 Sep 2019, In : Electronics (Switzerland). 8, 9, 24 p., 977.

Research output: Contribution to journalArticle

Open Access
Electrodes
Induced currents
Charge density
Industrial applications
Electrostatics
2018

An outline of a complementary inspection system for micro-electro-mechanical system (Mems) devices based on radiography and plenoptic camera

Chong, A., Feng, G., Kanfoud, J. & Gan, T. H., 1 Sep 2018, Advances in Manufacturing Technology XXXII: Proceedings of the 16th International Conference on Manufacturing Research, incorporating the 33rd National Conference on Manufacturing Research, September 11-13, 2018, University of Skövde Sweden. Thorvald, P. & Case, K. (eds.). IOS Press BV, Vol. 8. p. 33-38 6 p. (Advances in Transdisciplinary Engineering; vol. 8).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Radiography
Micro-electro-mechanical Systems
Inspection
Camera
Cameras
2017

A case study of image data processing in automated ultrasonic testing based aerospace composites inspection

Feng, G., Sun, J., Chong, A. Y. B., Kanfoud, J., Gan, T. H., Kimball, M., Al Rashed, M., Vega, L. M., Garcia, A. & Virk, G. S., 1 Oct 2017, 1st World Congress on Condition Monitoring (WCCM 2017). British Institute of Non-Destructive Testing, Vol. 1. p. 1095-1106 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ultrasonic testing
Inspection
Defects
Robotics
Composite materials
1 Citation (Scopus)

A comparative study of gravitational acceleration cancellation from on-rotor MEMS accelerometers for condition monitoring

Mones, Z., Feng, G., Tang, X., Haba, U., Gu, F. & Ball, A., 2017, Proceedings of the 24th International Congress on Sound and Vibration, ICSV 2017. Gibbs, B. (ed.). International Institute of Acoustics and Vibration, IIAV

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
accelerometers
cancellation
rotors
compressors
rotor dynamics

Application of wavelet packet transform and envelope analysis to non-stationary vibration signals for fault diagnosis of a reciprocating compressor

Ogbulafor, U. E., Feng, G., Mones, Z., Gu, F. & Ball, A. D., 2017, 1st World Congress on Condition Monitoring: (WCCM 2017). British Institute of Non-Destructive Testing

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
Reciprocating compressors
Failure analysis
Condition monitoring
Petrochemicals
Turbulent flow
1 Citation (Scopus)
Open Access
3D printers
Nondestructive examination
Tomography
Powder metallurgy
manufacturing
4 Citations (Scopus)
Open Access
Bearings (structural)
spectral correlation
Sensor nodes
Failure analysis
resources

Motor Current Signature Analysis for the Compound Fault Diagnosis of Reciprocating Compressors

Haba, U., Feng, G., Shaeboub, A., Peng, X., Gu, F. & Ball, A., 1 Jul 2017, In : International Journal of COMADEM. 20, 3, p. 31-37 7 p.

Research output: Contribution to journalArticle

Reciprocating compressors
Failure analysis
Stators
Torque
Induction motors

Thermal Energy Harvesting in Wireless Temperature Sensor Nodes for Condition Monitoring

Elforjani, B., Feng, G., Gu, F. & Ball, A., 1 Jul 2017, In : International Journal of COMADEM. 20, 3, p. 5-11 7 p.

Research output: Contribution to journalArticle

Energy harvesting
Condition monitoring
Temperature sensors
Thermal energy
Sensor nodes
2016
13 Citations (Scopus)
Open Access
Reciprocating compressors
Condition monitoring
Accelerometers
MEMS
Rotors
1 Citation (Scopus)

Enabling the multiple use of condition monitoring devices for real-time monitoring, real-time data logging and remote condition monitoring

Morris, E. P. C., Feng, G. & Horler, G., 28 Sep 2016, 7th IET Conference on Railway Condition Monitoring 2016 (RCM 2016). Institution of Engineering and Technology, Vol. 2016. 5 p. 7920675

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Condition monitoring
Monitoring
Ecosystems
1 Citation (Scopus)

Performance evaluation of wireless MEMS accelerometer for reciprocating compressor condition monitoring

Mones, Z., Feng, G., Ogbulaor, U. E., Wang, T., Gu, F. & Ball, A., 25 Nov 2016, Power Engineering: Proceedings of the International Conference on Power Transmissions 2016 (ICPT 2016), Chongqing, P.R. China, 27–30 October 2016. Qin, D. & Shao, Y. (eds.). CRC Press/Balkema, p. 895-900 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
Reciprocating compressors
Condition monitoring
Accelerometers
Compressors
Flywheels
2015
3 Citations (Scopus)

Achieving high bit rate logical stochastic resonance in a bistable system by adjusting parameters

Yang, D., Gu, F., Feng, G., Yang, Y. & Ball, A., 10 Oct 2015, In : Chinese Physics B. 24, 11, 110502.

Research output: Contribution to journalArticle

logic
adjusting
simulation
engineering
substitutes
2 Citations (Scopus)

A novel method to improve the resolution of envelope spectrum for bearing fault diagnosis based on a wireless sensor node

Feng, G., Zhen, D., Tian, X., Gu, F. & Ball, A. D., 2015, Vibration Engineering and Technology of Machinery - Proceedings of VETOMAC X, 2014. Kluwer Academic Publishers, Vol. 23. p. 765-775 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Sensor nodes
Failure analysis
Condition monitoring
Data communication systems
11 Citations (Scopus)

Implementation of envelope analysis on a wireless condition monitoring system for bearing fault diagnosis

Feng, G., Gu, J., Zhen, D., Aliwan, M., Gu, F. & Ball, A. D., 1 Feb 2015, In : International Journal of Automation and Computing. 12, 1, p. 14-24 11 p.

Research output: Contribution to journalArticle

Bearings (structural)
Condition Monitoring
Condition monitoring
Fault Diagnosis
Monitoring System
2014
2 Citations (Scopus)

Experimental free vibration analysis of clinched beams

He, X. C., Zhen, D., Yang, H. Y., Feng, G. J., Xing, B. Y., Gu, F. S. & Ball, A., 2014, Materials Science and Mechanical Engineering. Vol. 467. p. 338-342 5 p. (Applied Mechanics and Materials; vol. 467).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Vibration analysis
Damage detection
Joining
Frequency response
Dynamic response
2013
8 Citations (Scopus)

The real-time implementation of envelope analysis for bearing fault diagnosis based on wireless sensor network

Feng, G., Mustafa, A., Gu, J. X., Zhen, D., Gu, F. & Ball, A. D., 14 Nov 2013, ICAC 2013 - Proceedings of the 19th International Conference on Automation and Computing: Future Energy and Automation. IEEE, p. 31-36 6 p. 6662008

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Failure analysis
Wireless sensor networks
Condition monitoring
Signal processing
2012

基于TMS320VC5509A的数字化指向性扬声器

Translated title of the contribution: Digital directional loudspeaker based on TMS320VC5509AZhao, H., Wang, T., Feng, G. & Sun, K., 1 Nov 2012, In : Shuju Caiji Yu Chuli/Journal of Data Acquisition and Processing. 27, 6, p. 747-753 7 p.

Research output: Contribution to journalArticle

Loudspeakers
Ultrasonic sensors
Nonlinear distortion
Digital signal processors
Sensor arrays