Qiang Xu

Research output

Research output per year 1996 2012 2013 2015 2017 2020 2021 2022

• 408 Citations
• 12 h-index
• 56 Conference contribution
• 29 Article
• 6 Book
• 6 Conference article
• 5 More
  • 3 Chapter
  • 1 Special issue
  • 1 Review article

Research output per year

Research output per year

Search results

• 2021

  Remuneration Review: Risk, Planning, and Modelling beyond the Covid Crisis

  Cherrington, M., Airehrour, D., Madanian, S., Lu, J., Xu, Q. & Artiushkina, P., 6 Dec 2021, 2021 IEEE 12th Annual Information Technology, Electronics and Mobile Communication Conference, IEMCON 2021. Chakrabarti, S. & Paul, R. (eds.). IEEE, p. 412-419 8 p. 9623069. (Proceedings of the IEEE Annual Information Technology, Electronics and Mobile Communication Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Planning 100%
  • Strategic planning 68%
  • Competitive intelligence 66%
  • Uncertainty 65%
  • Risk analysis 57%
• 2020

  Deep Learning Decision Support for Sustainable Asset Management

  Cherrington, M., Lu, Z. ., Xu, Q., Airehrour, D., Madanian, S. & Dyrkacz, A., 28 Aug 2020, Advances in Asset Management and Condition Monitoring: COMADEM 2019. Ball, A., Gelman, L. & Rao, B. K. N. (eds.). 1st ed. Cham: Springer Nature Switzerland AG, Vol. 166. p. 537-547 11 p. (Smart Innovation, Systems and Technologies; vol. 166).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • sustainable management 100%
  • learning 77%
  • decision 59%
  • sustainability 14%
  • anomaly 12%
  7 Citations (Scopus)

• Digital Asset Management: New Opportunities from High Dimensional Data—A New Zealand Perspective

  Cherrington, M., Lu, Z. J., Xu, Q., Thabtah, F., Airehrour, D. & Madanian, S., 28 Aug 2020, Advances in Asset Management and Condition Monitoring, COMADEM 2019. Ball, A., Gelman, L. & Rao, B. K. N. (eds.). Springer, Cham, Vol. 166. p. 183-193 11 p. (Smart Innovation, Systems and Technologies; vol. 166).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Asset management 100%
  • Asset Management 84%
  • New Zealand 72%
  • Internet of things 34%
  • Emerging Asian Markets 32%
  2 Citations (Scopus)

• Features of Human-Centred Algorithm Design

  Cherrington, M., Airehrour, D., Lu, J., Xu, Q., Cameron-Brown, D. & Dunn, I., 25 Nov 2020, 2020 30th International Telecommunication Networks and Applications Conference, ITNAC 2020. Institute of Electrical and Electronics Engineers Inc., 6 p. 9315169. (International Telecommunication Networks and Applications Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • machine learning 100%
  • Feature extraction 60%
  • Machine learning 57%
  • Learning algorithms 32%
  • performance 17%

• Indigenous Big Data Implications in New Zealand

  Cherrington, M., Airehrour, D., Lu, J., Xu, Q., Wade, S. & Dunn, I., 25 Nov 2020, 2020 30th International Telecommunication Networks and Applications Conference, ITNAC 2020. Institute of Electrical and Electronics Engineers Inc., 6 p. 9315078. (International Telecommunication Networks and Applications Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • New Zealand 100%
  • Big data 60%
  • commerce 56%
  • incentives 49%
  • decision making 44%
• 2019

  Feature Selection: Filter Methods Performance Challenges

  Cherrington, M., Thabtah, F., Lu, J. & Xu, Q., 16 May 2019, 2019 International Conference on Computer and Information Sciences, ICCIS 2019. Institute of Electrical and Electronics Engineers Inc., p. 1-4 4 p. 8716478

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Feature Selection 100%
  • Filter 64%
  • Big data 55%
  • Feature extraction 47%
  • Machine learning 45%
  21 Citations (Scopus)

• Feature Selection: Multi-source and Multi-view Data Limitations, Capabilities and Potentials

  Cherrington, M., Lu, J., Airehrour, D., Thabtah, F., Xu, Q. & Madanian, S., 1 Nov 2019, 29th International Telecommunication Networks and Applications Conference : (ITNAC 2019). IEEE, 6 p. 9077992. (2019 29th International Telecommunication Networks and Applications Conference, ITNAC 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Feature extraction 100%
  • Data Analytics 47%
  • Big data 38%
  5 Citations (Scopus)

• Feature Selection Methods for Linked Data: Limitations, Capabilities and Potentials

  Cherrington, M., Airehrour, D., Lu, J., Xu, Q., Wade, S. & Madanian, S., 2 Dec 2019, BDCAT 2019: Proceedings of the 6th IEEE/ACM International Conference on Big Data Computing, Applications and Technologies. New York: Association for Computing Machinery, Inc, p. 103-112 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Feature Selection 100%
  • Linked Data 92%
  • Linked data 75%
  • Feature extraction 47%
  • Data mining 20%
  5 Citations (Scopus)

• Particle Swarm Optimization for Feature Selection: A Review of Filter-based Classification to Identify Challenges and Opportunities

  Cherrington, M., Airehrour, D., Lu, J., Thabtah, F., Xu, Q. & Madanian, S., 19 Dec 2019, 2019 IEEE 10th Annual Information Technology, Electronics and Mobile Communication Conference (IEMCON). Chakrabarti, S. & Saha, H. N. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 523-529 7 p. 8936185

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Feature Selection 100%
  • Particle Swarm Optimization 89%
  • Filter 64%
  • Particle swarm optimization (PSO) 51%
  • Feature extraction 47%
  6 Citations (Scopus)
• 2018

  Wireless Response System for multidisciplinary teaching and learning: Case studies

  Lu, J., Xu, Q., Joy, M., McKenna, S., Panowska, M., Toddington, S., Boyarchuk, A. & Guo, S., 31 Dec 2018, Proceedings of the 2018 International Conference on Internet Computing & Internet of Things: ICOMP'18. Arabnia, H. R., Deligiannidis, L. & Tinetti, F. G. (eds.). CSREA Press, p. 108-113 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  • Teaching 100%
  • learning 79%
  • university 72%
  • confidence 58%
  • student 57%
• 2016

  Arabic information retrieval: A relevancy assessment survey

  Ababneh, A. H., Lu, J. & Xu, Q., 2016, 25th International Conference on Information Systems Development, ISD 2016. Association for Information Systems, p. 345-357 13 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  • Information retrieval 100%
  • Statistical methods 21%
  2 Citations (Scopus)

• Hybrid classification system design using a decision learning approach and three layered structure: A Meta learning paradigm in Data Mining

  Ighoroje, L., Lu, J. & Xu, Q., 2016, 25th International Conference on Information Systems Development, ISD 2016. Association for Information Systems, p. 402-412 11 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Data mining 100%
  • Systems analysis 90%
  • Machine learning 88%
  • Learning algorithms 66%
  • Unsupervised learning 45%
• 2015

  A Review of Creep Deformation and Rupture Mechanisms of Low Cr-Mo Alloy for the Development of Creep Damage Constitutive Equations Under Lower Stress

  Xu, Q., Xu, Q., Lou, Z., Pang, Y. X. & Short, M., 1 May 2015, Scientific Computing. Arabnia, H. R., Gravvanis, G. A., Jandieri, G., Solo, A. M. G. & Tinetti, F. G. (eds.). CSREA Press, p. 165-171 7 p. (The 2013 WorldComp International Conference Proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  • constitutive equations 100%
  • damage 67%
  • cavities 23%
  • nucleation 14%
  • temperature 5%

• Determination of the material constants of creep damage constitutive equations using Matlab optimization procedure

  Igual, J. Z. & Xu, Q., 30 Oct 2015, 2015 21st International Conference on Automation and Computing: Automation, Computing and Manufacturing for New Economic Growth, ICAC 2015. Institute of Electrical and Electronics Engineers Inc., 7313991

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Creep 100%
  • Damage 93%
  • Constitutive Equation 88%
  • Constitutive equations 86%
  • MATLAB 83%
  4 Citations (Scopus)

• Practical Guidance on the Application of R-K Integration Method in Finite Element Analysis of Creep Damage Problem

  Tan, F., Xu, Q., Lou, Z., Xu, D. & Liu, D., 1 May 2015, Scientific Computing. Arabnia, H. R., Gravvanis, G. A., Jandieri, G., Solo, A. M. G. & Tinetti, F. G. (eds.). CSREA Press, p. 141-145 5 p. (The 2013 WorldComp International Conference Proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  • Creep 100%
  • Finite element method 71%
  • Mechanics 50%
  • Numerical analysis 50%
  • Software engineering 47%
  2 Citations (Scopus)

• Review of Creep Deformation and Rupture Mechanism of P91 Alloy for the Development of Creep Damage Constitutive Equations Under Low Stress Level

  An, L., Xu, Q., Xu, D. & Lou, Z., 1 May 2015, Scientific Computing. Arabnia, H. R., Gravvanis, G. A., Jandieri, G., Solo, A. M. G. & Tinetti, F. G. (eds.). CSREA Press, p. 184-187 4 p. (The 2013 WorldComp International Conference Proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  • Constitutive equations 100%
  • Creep 79%
  • Continuum damage mechanics 24%
  • Industry 8%
  • Temperature 7%

• The Development and Validation of the Creep Damage Constitutive Equations for P91 Alloy

  Yang, X., Xu, Q. & Lou, Z., 1 May 2015, Scientific Computing. Arabnia, H. R., Gravvanis, G. A., Jandieri, G., Solo, A. M. G. & Tinetti, F. G. (eds.). CSREA Press, p. 121-127 7 p. (The 2013 WorldComp International Conference Series).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  • Constitutive equations 100%
  • Creep 79%
  • Set theory 19%
  • Industrial applications 14%
  • Mechanics 13%

• The Development of Finite Element Analysis Software for Creep Damage Analysis

  Liu, D., Xu, Q., Lou, Z., Xu, D. & Tan, F., 1 May 2015, Scientific Computing. Arabnia, H. R., Gravvanis, G. A., Jandieri, G., Solo, A. M. G. & Tinetti, F. G. (eds.). CSREA Press, 5 p. (The 2013 WorldComp International Conference proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  • Creep 100%
  • Finite element method 71%
  • Software engineering 31%
  • Industry 16%
  • Temperature 15%

• The interpretation of experimental observation date for the development of mechanisms based creep damage constitutive equations for high chromium steel

  Yang, X., Lu, Z. & Xu, Q., 2015, 21st International Conference on Automation and Computing (ICAC) 2015. Institute of Electrical and Electronics Engineers Inc., 7313992

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  • Chromium 100%
  • Creep 79%
  • Chromium steel 77%
  • Steel 76%
  • Date 75%
  1 Citation (Scopus)
• 2014

  Contact pressure distribution in joints formed by V-band clamps

  Barrans, S. M., Khodabakhshi, G. & Xu, Q., 2014, Mechanical and Aerospace Engineering V. Trans Tech Publications Ltd, Vol. 1016. p. 34-38 5 p. (Advanced Materials Research; vol. 1016).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Clamping devices 100%
  • Pressure distribution 86%
  • Friction 41%
  • Bolts 30%
  • Flanges 30%
  6 Citations (Scopus)

• Preliminary review of the influence of cavitation behavior in creep damage constitutive equations

  Yang, X., Xu, Q., Lu, Z. Y. & Barrans, S., 2014, Machinery, Materials Science and Engineering Applications 2014. Gao, Q., Barrans, S. & Xu, Q. (eds.). Trans Tech Publications Ltd, Vol. 940. p. 46-51 6 p. (Advanced Materials Research; vol. 940).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Chromium steel 100%
  • Cavitation 89%
  • Constitutive equations 89%
  • X rays 74%
  • Creep 70%
  3 Citations (Scopus)

• The effect of initial estimated points on objective functions for optimization

  Soltani, M., Pola, A. & Xu, Q., 2014, Proceedings - 28th European Conference on Modelling and Simulation, ECMS 2014. European Council for Modelling and Simulation, p. 304-308 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Creep 100%
  • Damage 93%
  • Objective function 66%
  • Influence 61%
  • Optimization 60%
  1 Citation (Scopus)
• 2013

  Analyzing the Characteristics of the Cavity Nucleation, Growth and Coalescence Mechanism of 9Cr-1Mo-VNb Steel (P91) Steel

  An, L., Xu, Q., Lou, Z. & Xu, D., 2013, Advanced Materials Research, Mechanical Engineering and Manufacturing. Gao, Q. (ed.). Trans Tech Publications Ltd, Vol. 744. p. 412-416 5 p. (Advanced Materials Research; vol. 744).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Nucleation 90%
  • Steel 49%
  • Creep 49%
  • Continuum damage mechanics 38%
  • Constitutive equations 31%
  2 Citations (Scopus)

• Damage Modelling: the current state and the latest progress on the developing of creep damage constitutive equations for high Cr steels

  Xu, Q., Lou, Z. & Wang, X., 2013, 6th International ‘HIDA’ Conference: Life/Defect Assessment & Failures in High Temperature Plant. Shibli, A. (ed.). ETD Ltd, UK

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  • constitutive equations 100%
  • steels 69%
  • damage 67%
  • cavities 29%
  • suggestion 23%

• The development of advanced creep constitutive equations for high chromium steel P91 at low stress range

  An, L., Xu, Q. & Lou, Z., 2013, 6th International “HIDA” Conference: Life/Defect Assessment & Failures in High Temperature Plant. Shibli, A. (ed.). ETD Ltd, UK, Poster Paper 6

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  • chromium steels 100%
  • constitutive equations 72%
  • Laves phases 20%
  • strain rate 14%
  • cavities 10%

• The development of computational FE system for creep damage analysis of weldment

  Tan, F., Xu, Q., Lou, Z. & Barrans, S., 2013, 6th International ‘HIDA’ Conference: Life/Defect Assessment & Failures in High Temperature Plant. Shibli, A. (ed.). ETD Ltd, UK

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  • Subroutines 100%
  • Creep 76%
  • Finite element method 54%
  • Constitutive equations 32%
  • Numerical methods 26%

• The development of creep damage constitutive equations for low Cr-Mo alloy steel and its weldment at low stress

  Xu, Q., Xu, Q. & Lou, Z., 2013, 6th International ‘HIDA’ Conference: Life/Defect Assessment & Failures in High Temperature Plant. Shibli, A. (ed.). ETD Ltd, UK

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  • constitutive equations 100%
  • steels 69%
  • damage 67%
  • nucleation 28%
  • research projects 23%

• The development of finite element software for creep deformation and damage analysis of weldment

  Liu, D., Xu, Q., Lu, J. & Barrans, S., 2013, 6th International ‘HIDA’ Conference: Life/Defect Assessment & Failures in High Temperature Plant. Shibli, A. (ed.). ETD Ltd, UK

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  • Creep 100%
  • Mechanics 33%

• The relative significance of internal damage mechanisms on the overall creep damage and ultimate failure of P91 steel

  Yang, X., Xu, Q. & Lou, Z., 2013, 6th International ‘HIDA’ Conference: Life/Defect Assessment & Failures in High Temperature Plant. Shibli, A. (ed.). ETD Ltd, UK, Poster Paper 5

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  • Creep 100%
  • Steel 67%
  • Micromechanics 20%
  • Nucleation 17%
  • Mechanics 14%

• The Techniques in Developing Finite Element Software for Creep Damage Analysis

  Liu, D., Xu, Q., Lou, Z., Xu, D. & Xu, Q., 2013, Advances in Material Science, Mechanical Engineering and Manufacturing. Gao, Q. (ed.). Scientific.net, p. 199-204 6 p. (Advanced Materials Research; vol. 744).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Creep 100%
  • Subroutines 65%
  • Industry 25%
  • Temperature 23%
  3 Citations (Scopus)

• The validation of computational FE software for creep damage mechanics

  Liu, D. Z., Xu, Q., Lu, Z., Xu, D. L. & Tan, F., 30 Sep 2013, Advances in Material Science, Mechanical Engineering and Manufacturing. Gao, Q. (ed.). Trans Tech Publications Ltd, p. 205-210 6 p. (Advanced Materials Research; vol. 744).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Mechanics 100%
  • Creep 98%
  • Finite element method 71%
  2 Citations (Scopus)

• The Validation of Computational Software System for Creep Damage Analysis

  Tan, F., Xu, Q., Lou, Z., Xu, D. & Liu, D., 2013, Advances in Material Science, Mechanical Engineering and Manufacturing. Gao, Q. (ed.). Scientific.net, Vol. 744. p. 449-454 6 p. (Advanced Materials Research; vol. 744).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Creep 100%
  1 Citation (Scopus)
• 2012

  Current State of Developing Creep Damage Constitutive Equation for 0.5Cr0.5Mo0.25V Ferritic Steel

  Xu, Q., Xu, Q., Pan, Y. & Short, M., 31 Aug 2012, Machinery, Materials Science and Engineering Applications: MMSE 2012. Gao, Q. (ed.). Trans Tech Publications Ltd, Vol. 510. p. 812-816 5 p. (Advanced Materials Research; vol. 510).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Ferritic stainless steel 100%
  • Constitutive equations 93%
  • Creep 73%
  • Alloy steel 19%
  • Stainless steel 14%
  4 Citations (Scopus)

• Literature Review on the Development of Computational Software System for Creep Damage Analysis for Weldment

  Tan, F., Xu, Q., Lou, Z. & Xu, D., 25 Apr 2012, Machinery, Materials Science and Engineering Applications: MMSE2012. Gao, Q. (ed.). Trans Tech Publications Ltd, p. 490-494 5 p. (Advanced Materials Research; vol. 510).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Creep 100%
  • Subroutines 43%
  • Constitutive equations 42%
  • Availability 27%
  1 Citation (Scopus)

• Preliminary analysing of experimental data for the development of high Cr Alloy Creep damage constitutive equations

  An, L., Xu, Q., Xu, D. & Lu, J., 15 Oct 2012, Proceedings of the 18th International Conference on Automation and Computing (ICAC): Integration of Design and Engineering. Qin, S., Chen, W., Liu, J. & Guan, C. (eds.). IEEE, p. 207-211 5 p. 6330535

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Constitutive equations 100%
  • Creep 79%
  • Continuum damage mechanics 20%
  • Set theory 19%
  • Experiments 5%
  1 Citation (Scopus)

• Research in the development of computational FE software for creep damage mechanics

  Liu, D., Xu, Q., Lu, Z. & Xu, D., 15 Oct 2012, Proceedings of the 18th International Conference on Automation and Computing (ICAC 12): Integration of Design and Engineering. Qin, S., Chen, W., Liu, J. & Guan, C. (eds.). IEEE, 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Mechanics 100%
  • Creep 98%
  3 Citations (Scopus)

• Review on the Current State of Developing of Advanced Creep Damage Constitutive Equations for High Chromium Alloy

  An, L., Xu, Q., Xu, D. & Lou, Z., 25 Apr 2012, Machinery, Materials Science and Engineering Applications: MMSE2012. Gao, Q. (ed.). Trans Tech Publications, p. 776-780 5 p. (Advanced Materials Research; vol. 510).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • chromium alloys 100%
  • constitutive equations 79%
  • damage 53%
  3 Citations (Scopus)

• The preliminary development of computational software system for creep damage analysis in weldment

  Tan, F., Xu, Q., Lou, Z. & Xu, D., 15 Oct 2012, Proceedings of 18th International Conference on Automation and Computing (ICAC), 2012: Integration of Design and Engineering. Qin, S., Chen, W., Liu, J. & Guan, C. (eds.). IEEE, 4 p. 6330534

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Creep 100%
  • Software engineering 94%
  2 Citations (Scopus)

• The review of computational FE software for creep damage mechanics

  Liu, D., Xu, Q., Lu, Z. & Xu, D., 15 May 2012, Machinery, Materials Science and Engineering Applications. Gao, Q. (ed.). Trans Tech Publications Ltd, p. 495-499 5 p. (Advanced Materials Research; vol. 510).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Mechanics 100%
  • Creep 98%
  3 Citations (Scopus)
• 2011

  Analysing construction delay factors: A case study of building construction project in Libya

  Shebob, A., Dawood, N. & Xu, Q., 1 Dec 2011, ARCOM 2011: Proceedings 27th Annual ARCOM Conference. Egbu, C. & Lou, E. C. W. (eds.). Association of Researchers in Construction Management, p. 1005-1012 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  • Construction industry 98%
  • Contractors 92%
  • Managers 81%
  • Industry 41%
  • Experiments 33%
  9 Citations (Scopus)

• Finite element investigation of nano-indentation of coated stainless steel

  Xu, Q., Jiang, C., Liu, D., Pang, Y. & Hodgson, S., 21 Nov 2011, Proceedings of 2011 17th International Conference on Automation & Computing: University of Huddersfield, Huddersfield, UK, 10 September 2011 . Chen, W., Chen, X. & Xu, Z. (eds.). IEEE, p. 172-176 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Nanoindentation 100%
  • Stainless steel 71%
  • Coatings 61%
  • Austenitic stainless steel 39%
  • Finite element method 17%

• The Development and Validation of Multi-axial Creep Damage Constitutive Equations for P91

  Xu, Q., Wright, M. & Xu, Q., 21 Nov 2011, Proceedings of 2011 17th International Conference on Automation & Computing: ICAC 2011. Chen, W., Chen, X. & Xu, Z. (eds.). IEEE, p. 177-182 6 p. 6084923

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Constitutive equations 100%
  • Creep 79%
  • Set theory 19%
  • Steel 17%
  4 Citations (Scopus)
• 2010

  Understanding the Dynamic Response of a Machine Tool Structure by Finite Element Analysis

  Xu, Q. & Barrans, S., 1 Jan 2010, Proceedings of 19th International Conference on Flexible Automation and Intelligent Manufacturing 2009 (FAIM 2009). Nabhani, F., Frost, C., Zarei, S., Ahmad, M. & Sullivan, W. G. (eds.). Curran Associates, Inc, Vol. 1. p. 919-924 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
• 2009

  An Intelligent System for Analyzing Welding Defects using Image Retrieval Techniques

  Pein, R. P., Lou, Z., Stav, J. B., Xu, Q., Uran, M. & Mráz, L., 2009, 19th International Conference on Flexible Automation and Intelligent Manufacturing 2009 (FAIM 2009): Proceedings of a meeting held 6-8 July 2009, Middlesbrough, United Kingdom. Nabhani, F., Frost, C., Zarei, S., Ahmad, M. & Sullivan, W. G. (eds.). Curran Associates, Inc, Vol. 1. p. 939-946 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Image retrieval 100%
  • Intelligent systems 99%
  • Welding 77%
  • Defects 66%
  • Image processing 25%

• A review of finite element analysis of metal cutting

  Xu, Q. & Lu, J., 2009, 19th International Conference on Flexible Automation and Intelligent Manufacturing 2009 (FAIM 2009): Proceedings of a meeting held 6-8 July 2009, Middlesbrough, United Kingdom. Nabhani, F., Frost, C., Zarei, S., Ahmad, M. & Sullivan, W. G. (eds.). Curran Associates, Inc, p. 932-938 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Automatic Digital X-Ray Control with Content-Based Image Retrieval Techniques

  Pein, R. P., Lu, J., Stav, J. B., Xu, Q., Uran, M. & Mráz, L., 1 Oct 2009, 10th International Conference of the Slovenian Society for Non-Destructive Testing 2009: Application of Contemporary Non-Destructive Testing in Engineering . Grum, J. (ed.). The Slovenian Society for Non-Destructive Testing, Vol. 1. p. 167-176 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  • Image retrieval 100%
  • X rays 87%
  • Welding 77%
  • Image processing 25%
  • Inspection 24%
  2 Citations (Scopus)
• 2004

  Co-operative design based on multi-agent system

  Hua, C., Chao, L., Yan, C., Rujia, Z. & Xu, Q., Aug 2004, Advances in e-Engineering and Digital Enterprise Technology: Proceedings of the 4th International Conference on E-Engineering and Digital Enterprise. Cheng, K., Webb, D. & Marsh, R. (eds.). Wiley, p. 315-320 6 p. (IMechE Event Publications).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Multi agent systems 100%
  • Product design 26%
  • Information technology 23%
  • Artificial intelligence 23%
  • Managers 22%
  1 Citation (Scopus)

• Understanding the dynamic response of a machine tool structure by finite element analysis

  Xu, Q., Barrans, S., Holmes, A. & Ford, D. G., 2004, Proceedings of the 4th EUSPEN international conference: Conference proceedings, 4th international conference of the European Society for Precision Engineering and Nanotechnology. euspen, p. 410-411 2 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
• 2003

  A review of the fundamentals of the finite element simulation of metal cutting

  Xu, Q., Miller, B. & Ford, D., 2003, Laser Metrology and Machine Performance VI: Proceedings of the 6th International Conference on Laser Metrology, Machine Tool, CMM and Robot Performance. Lamdamap 2003. Ford, D. G. (ed.). WIT Press, Vol. 44. p. 391-399 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  • Metal cutting 100%
  • Experiments 5%
  1 Citation (Scopus)

• Finite element analysis of the structural dynamics of a vertical milling machine

  Myers, A., Ford, D. & Xu, Q., 2003, Laser Metrology and Machine Performance VI: Proceedings of the 6th International Conference on Laser Metrology, Machine Tool, CMM and Robot Performance. Lamdamap 2003. Ford, D. G. (ed.). WIT Press, Vol. 44. p. 431-440 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  • stiffness 100%
  • deflection 30%
  • vibration 27%
  • analysis 27%
  • need 15%
  11 Citations (Scopus)