If you made any changes in Pure these will be visible here soon.

Research Output 2000 2020

Filter
Conference contribution
2019

Increasing compressor wheel fatigue life through residual stress generation

Barrans, S., Allport, J. & Thompson, A., 1 Jan 2019, Advances in Manufacturing Engineering and Materials: Proceedings of the International Conference on Manufacturing Engineering and Materials (ICMEM 2018). Hloch, S., Klichová, D., Krolczyk, G. M., Chattopadhyaya, S. & Ruppenthalová, L. (eds.). Springer Verlag, p. 375-385 11 p. (Lecture Notes in Mechanical Engineering).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressors
Residual stresses
Wheels
Fatigue of materials
Compressive stress
2018
1 Citation (Scopus)

Investigation into the impact of span-wise flow distribution on the performance of a mixed flow turbine

Lee, S., Barrans, S., Jupp, M. & Nickson, A., 11 Jun 2018, ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers (ASME), Vol. 2B-2018. 12 p. GT2018-76992

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Turbines
Engines
Inlet flow
Fibers
Axial flow
2017
2 Citations (Scopus)

Determining Stress in Turbocharger Impellers due to Component Machining Process

Barrans, S., Tabriz, M. S. E. & Ellis, C., 2017, ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers (ASME), Vol. Volume 7A: Structures and Dynamics. 11 p. V07AT30A006

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Impellers
Wheels
Machining
Geometry
Computer aided design
1 Citation (Scopus)

Effect of machining parameters on surface roughness in Al 2618 alloy subject to multi-axis machining process using ball nose cutting tools

Tabriz, M. S. E., Barrans, S. & Bills, P., 18 Sep 2017, 2017 8th International Conference on Mechanical and Aerospace Engineering, ICMAE 2017. Institute of Electrical and Electronics Engineers Inc., p. 16-20 5 p. 8038609

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
Cutting tools
Machining
Surface roughness
Durability
Fatigue of materials
2 Citations (Scopus)

Electromagnetic and Mechanical Analysis of High Speed SPM Rotor with Copper Shield

Al-ani, M., Barrans, S. & Carter, J., 8 Aug 2017, 2017 IEEE International Electric Machines and Drives Conference (IEMDC). 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
Permanent magnets
Rotors
Copper
Pulse amplitude modulation
Eddy currents

Empirical method for determining axial load distribution in joints formed by V-band clamps

Ali, A., Barrans, S. M. & Ghiradi, F., 18 Sep 2017, 2017 8th International Conference on Mechanical and Aerospace Engineering, ICMAE 2017. Institute of Electrical and Electronics Engineers Inc., p. 11-15 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Axial loads
Clamping devices
Flanges
Pressure transducers
Strain gages
2014

Analysis of the torsional load capacity of V-section band clamps

Barrans, S. M., Waterworth, A. & Sahboun, S., 2014, Mechanical and Aerospace Engineering V. Trans Tech Publications Ltd, Vol. 1016. p. 59-64 6 p. (Advanced Materials Research; vol. 1016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Clamping devices
Flanges
Friction
Point contacts
2 Citations (Scopus)

Contact pressure distribution in joints formed by V-band clamps

Barrans, S. M., Khodabakhshi, G. & Xu, Q., 2014, Mechanical and Aerospace Engineering V. Trans Tech Publications Ltd, Vol. 1016. p. 34-38 5 p. (Advanced Materials Research; vol. 1016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Clamping devices
Pressure distribution
Friction
Bolts
Flanges

Determining a robust, Pareto optimal geometry for a welded joint

Barrans, S. M. & Radhi, H. E., 2014, Mechanical and Aerospace Engineering V. Trans Tech Publications Ltd, Vol. 1016. p. 39-43 5 p. (Advanced Materials Research; vol. 1016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Welds
Geometry
1 Citation (Scopus)

Preliminary review of the influence of cavitation behavior in creep damage constitutive equations

Yang, X., Xu, Q., Lu, Z. Y. & Barrans, S., 2014, Machinery, Materials Science and Engineering Applications 2014. Gao, Q., Barrans, S. & Xu, Q. (eds.). Trans Tech Publications Ltd, Vol. 940. p. 46-51 6 p. (Advanced Materials Research; vol. 940).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Constitutive equations
Cavitation
Creep
Steel
X rays
2012
3 Citations (Scopus)

Comparison between multiobjective population-based algorithms in mechanical problem

Radhi, H. E. & Barrans, S. M., 28 Feb 2012, Mechanical and Aerospace Engineering: ICMAE2011. Fan, W. (ed.). Scientific.net, Vol. 1. p. 2383-2389 7 p. (Applied Mechanics and Materials; vol. 110-116).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Multiobjective optimization
Experiments
1 Citation (Scopus)

Practical energy storage utilising Kinetic Energy Storage Batteries (KESB)

Johnson, A., Dooley, M., Gibson, A. G. & Barrans, S. M., 22 Oct 2012, Proceedings of the 2nd International Symposium on Environment Friendly Energies and Applications, EFEA 2012. Rajbhandari, S., Busawon, K., Maheri, A. & Djemai, M. (eds.). IEEE, p. 112-117 6 p. 6294076

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Kinetic energy
Energy storage
Electricity
Costs
Flywheels
2010
2 Citations (Scopus)

Impact of flange geometry on the ultimate axial load capacity of V-band clamps

Muller, M. & Barrans, S. M., 1 Dec 2010, 9th International Conference on Turbochargers and Turbocharging . Institution of Mechanical Engineers, p. 183-192 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Axial loads
Clamping devices
Flanges
Geometry
Bearings (structural)
2009
2 Citations (Scopus)

Evaluation and comparison of a large machine tool structure with ISO standard alignment tests

Myers, A., Barrans, S. M., Longstaff, A. P., Fletcher, S. & Ford, D. G., 1 Jun 2009, Laser Metrology and Machine Performance IX : 9th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2009. Cheng, K. (ed.). euspen, p. 57-66 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
machine tools
Machine tools
alignment
evaluation
geometric accuracy
1 Citation (Scopus)

Manufacturing error sensitivity of flat pad air bearings

Barrans, S. M., Bhat, N. & Kumar, A. S., 1 Jun 2009, Laser Metrology and Machine Performance IX: 9th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2009. Cheng, K. (ed.). euspen, p. 515-524 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Bearing pads
gas bearings
manufacturing
sensitivity
2008

An investigation on generation of debris at the stem cement interface

Zhang, H., Brown, L., Blunt, L. & Barrans, S., 28 May 2008, 8th World Biomaterials Congress 2008. Vol. 4. p. 1768 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2007
1 Citation (Scopus)

Profiled Surface Aerostatic Bearings

Barrans, S. M., Yao, S. & Charlton, P., 25 Jun 2007, Laser Metrology and Machine Performance VIII : 8th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2007. Thornett, E. (ed.). euspen, p. 242-251 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
aerostatics
Orifices
orifices
Polishing machines
1 Citation (Scopus)

Structural analysis of a large moving gantry milling machine including its work support system and foundation

Myers, A., Barrans, S. M. & Ford, D. G., 25 Jun 2007, Laser Metrology and Machine Performance VIII : 8th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2007. Thornett, E. (ed.). euspen, p. 63-72 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

milling machines
gantry cranes
Milling machines
support systems
structural analysis
2006
9 Citations (Scopus)

Axial Load Capacity of V-Section Band Clamp Joints

Shoghi, K., Barrans, S. & Ramasamy, P., 2006, 8th International Conference on Turbochargers and Turbocharging. Woodhead Publishing Ltd., p. 273-285 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Axial loads
Clamping devices
Friction
Finite element method
2005
5 Citations (Scopus)

Finite element analysis of the static stiffness of a foundation for large machine tool

Myers, A., Ford, D. G. & Barrans, S., 1 Jun 2005, Laser Metrology and Machine Performance VII : 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2005. Shore, P. (ed.). euspen, p. 77-86 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

machine tools
Machine tools
stiffness
Stiffness
Finite element method
2 Citations (Scopus)

Optimisation of flat pad aerostatic bearings with the aid of finite element analysis

Barrans, S. M. & Bhat, N., 2005, Laser Metrology and Machine Performance VII: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2005. Shore, P. (ed.). euspen, p. 392-401 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

aerostatics
Bearing pads
Bearings (structural)
Finite element method
optimization
2004

Understanding the dynamic response of a machine tool structure by finite element analysis

Xu, Q., Barrans, S., Holmes, A. & Ford, D. G., 2004, Proceedings of the 4th EUSPEN international conference: Conference proceedings, 4th international conference of the European Society for Precision Engineering and Nanotechnology. euspen, p. 410-411 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2003
3 Citations (Scopus)

Design of flat pad aerostatic bearings with the aid of finite element analysis

Barrans, S. M. & Bhat, N., 2003, Laser Metrology and Machine Performance VI: Proceedings of the 6th International Conference on Laser Metrology and Machine Performance. Ford, D. (ed.). WIT Press, Vol. 44. p. 361-370 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearing pads
Bearings (structural)
Finite element method
Mesh generation
Journal bearings

Design optimisation of the head of a high-precision optical polishing machine

Barrans, S. M., Ghurbal, E. M. & Freeman, R., 2003, Laser Metrology and Machine Performance VI: Sixth International Conference on Laser Metrology, Machine Tool, CMM and Robot Performance. Ford, D. (ed.). WIT Press, Vol. 44. p. 325-336 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Polishing machines
Polishing
Rubber
Finite element method
Design optimization