If you made any changes in Pure these will be visible here soon.

Research Output

  • 36 Article
  • 21 Conference contribution
  • 1 Conference article
Article

A Fast Gauss filtering Algorithm for 3D Surface Roughness

Zeng, W. H., Gao, Y., Xie, T. B. & Li, Z., 2003, In : Jiliang Xuebao/Acta Metrologica Sinica. 2003, 1, p. 10-13 4 p.

Research output: Contribution to journalArticle

9 Citations (Scopus)

A Generalised Linear and Nonlinear Spline Filter

Zeng, W., Jiang, X. & Scott, P., 3 Jun 2011, In : Wear. 271, 3-4, p. 544-547 4 p.

Research output: Contribution to journalArticle

14 Citations (Scopus)

A new method to characterize the structured tessellation surface

Zeng, W., Jiang, X., Scott, P. J. & Li, T., 2013, In : Procedia CIRP. 10, p. 155-161 7 p.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)
Open Access
File
Open Access
2 Citations (Scopus)

Automated Bullet-Identification System Based on Surface Topography Techniques

Blunt, L., Zeng, W., Jiang, X., Xiao, S. & Xie, F., 15 Mar 2009, In : Wear. 266, 5-6, p. 518-522 5 p.

Research output: Contribution to journalArticle

13 Citations (Scopus)

Characterisation methods for powder bed fusion processed surface topography

Lou, S., Jiang, X., Sun, W., Zeng, W., Pagani, L. & Scott, P., 1 May 2019, In : Precision Engineering. 57, p. 1-15 15 p.

Research output: Contribution to journalArticle

Open Access
File
6 Citations (Scopus)
Open Access
3 Citations (Scopus)
1 Citation (Scopus)

Entropy-based method for evaluating spatial distribution of form errors for precision assembly

Zhang, Q., Zhang, Z., Jin, X., Zeng, W., Lou, S., Jiang, X. & Zhang, Z., 1 Nov 2019, In : Precision Engineering. 60, p. 374-382 9 p.

Research output: Contribution to journalArticle

Open Access
20 Citations (Scopus)
Open Access
6 Citations (Scopus)

High fidelity replication of surface texture and geometric form of a high aspect ratio aerodynamic test component

Walton, K., Fleming, L., Goodhand, M. N., Racasan, R. & Zeng, W., 2 Apr 2016, In : Surface Topography: Metrology and Properties. 4, 2, 12 p., 025003.

Research output: Contribution to journalArticle

Open Access
5 Citations (Scopus)

Influence of surface topography on torsional fretting wear under flat-on-flat contact

Lu, W., Zhang, P., Liu, X., Zhai, W., Zhou, M., Luo, J., Zeng, W. & Jiang, X., 1 May 2017, In : Tribology International. 109, p. 367-372 6 p.

Research output: Contribution to journalArticle

Open Access
28 Citations (Scopus)

Investigation on the Noise Separation in Watt Balance Experiments

Zeng, W., Jiang, X., Blunt, L. & Scott, P., 17 Jul 2008, In : Key Engineering Materials. 381-382, p. 619-622 4 p.

Research output: Contribution to journalArticle

Linear Feature Extraction Based on Complex Ridgelet Transform

Jiang, X., Zeng, W., Blunt, L., Scott, P. & Ma, J., 4 Mar 2008, In : Wear. 264, 5-6, p. 428-433 6 p.

Research output: Contribution to journalArticle

19 Citations (Scopus)

Metrological Characteristics of Dual-Tree Complex Wavelet Transform for Surface Analysis

Zeng, W., Jiang, X. & Scott, P., 27 May 2005, In : Measurement Science and Technology. 16, 7, p. 1410-1417 8 p.

Research output: Contribution to journalArticle

Open Access
24 Citations (Scopus)

Model-driven photometric stereo for in-process inspection of non-diffuse curved surfaces

Ren, M., Xiao, G., Zhu, L., Zeng, W. & Whitehouse, D., 2019, In : CIRP Annals. 68, 1, p. 563-566 4 p.

Research output: Contribution to journalArticle

Non-Overlap Subaperture Interferometric Testing for Large Optics

Wu, X., Yu, Y., Zeng, W., Qi, T., Chen, M. & Jiang, X., 1 Aug 2017, In : Optics Communications. 396, p. 191-198 8 p.

Research output: Contribution to journalArticle

Open Access

Novel end-fly-cutting-servo system for deterministic generation of hierarchical micro-nanostructures

To, S., Zhu, Z. & Zeng, W., 2015, In : CIRP Annals - Manufacturing Technology. 64, 1, p. 133-136 4 p.

Research output: Contribution to journalArticle

10 Citations (Scopus)

Research on Method of Robust Extraction of Surface Roughness

Zeng, W., Xie, T., Jiang, X. & Li, Z., 2004, In : Zhongguo Jixie Gongcheng/China Mechanical Engineering. 2004, 2, p. 127-130 4 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)
17 Citations (Scopus)

Roundness Filtration by Using a Robust Regression Filter

Zeng, W., Scott, P. J. & Jiang, X., 15 Feb 2011, In : Measurement Science and Technology. 22, 3, 035108.

Research output: Contribution to journalArticle

Open Access
10 Citations (Scopus)

Selecting a semantic similarity measure for concepts in two different CAD model data ontologies

Lu, W., Qin, Y., Qi, Q., Zeng, W., Zhong, Y., Liu, X. & Jiang, X., Aug 2016, In : Advanced Engineering Informatics. 30, 3, p. 449-466 18 p.

Research output: Contribution to journalArticle

Open Access
14 Citations (Scopus)

Study of weighted fusion methods for the measurement of surface geometry

Wang, J., Pagani, L., Leach, R. K., Zeng, W., Colosimo, B. M. & Zhou, L., Jan 2017, In : Precision Engineering. 47, p. 111-121 11 p.

Research output: Contribution to journalArticle

16 Citations (Scopus)
Open Access
15 Citations (Scopus)
Open Access
3 Citations (Scopus)

Texture Extraction and Identification of 3D Engineering Surfaces

Zeng, W., Jiang, X., Gao, Y. & Xie, T., 15 Oct 2005, In : Key Engineering Materials. 295-296, p. 453-458 6 p.

Research output: Contribution to journalArticle

The Detection of Transient Behaviour in Environmental Vibration for the Watt Balance

Jiang, X., Zeng, W., Scott, P., Smith, I. M. & Malétras, F. X., 27 Mar 2007, In : Measurement Science and Technology. 18, 5, p. 1487-1494 8 p., 039.

Research output: Contribution to journalArticle

7 Citations (Scopus)

The effect of primer cap material on ballistic toolmark evidence

Addinall, K., Zeng, W., Bills, P., Wilcock, P. & Blunt, L., 1 May 2019, In : Forensic Science International. 298, p. 149-156 8 p.

Research output: Contribution to journalArticle

Open Access
File

Torsional Fretting and Torsional Sliding Wear Behaviors of CuNiAl against 42CrMo4 under Dry Condition

Zhang, P., Lu, W., Liu, X., Zhai, W., Zhou, M. & Zeng, W., Feb 2018, In : Tribology International. 118, p. 11-19 9 p.

Research output: Contribution to journalArticle

Open Access
11 Citations (Scopus)

Torsional fretting wear behavior of CuNiAl against 42CrMo4 under flat on flat contact

Zhang, P., Lu, W., Liu, X., Zhou, M., Zhai, W., Zhang, G., Zeng, W. & Jiang, X. J., 15 Jun 2017, In : Wear. 380-381, p. 6-14 9 p.

Research output: Contribution to journalArticle

16 Citations (Scopus)
Open Access

Transient Signal Separation in Watt Balance Experiments

Zeng, W., Jiang, X., Scott, P. & Smith, I. M., 1 Mar 2010, In : Physics Letters, Section A: General, Atomic and Solid State Physics. 374, 11-12, p. 1301-1306 6 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

高阶高斯滤波和Radon变换结合的缸体特征提取

Translated title of the contribution: Cylinder Surface Feature Extraction Combining High-Order Gaussian Filter with Radon TransformDai, J., Zeng, W., Yang, W., Lu, W., Liu, X. & Qin, H., 10 Apr 2019, In : Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University. 53, 4, p. 136-142 7 p.

Research output: Contribution to journalArticle

Open Access
Conference article

An Information Model for Surface Metrology

Li, T., Blunt, L. A., Jiang, X. & Zeng, W., 2013, In : Procedia CIRP. 10, p. 251-258 8 p.

Research output: Contribution to journalConference article

Open Access
Conference contribution

A Fast Algorithm for the 2nd Order Robust Areal Gaussian Regression Filter

Zeng, W., Jiang, X. & Scott, P., 2010, Proceedings of the 10th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2010. euspen, Vol. 1. p. 508-511 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A fast algorithm for the high order linear and nonlinear Gaussian regression filter

Zeng, W., Jiang, X., Scott, P. J., Xiao, S. & Blunt, L., 2009, Proceedings of the 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009. euspen, Vol. 2. p. 356-359 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

9 Citations (Scopus)

A key point method for data registration for MultiSensor fusion

Zeng, W., Jiang, X., Lou, S. & Scott, P., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen, p. 69-70 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

An fast and efficient algorithm for spline filters

Zeng, W., Jiang, X., Lou, S. & Scott, P. J., 24 Oct 2014, ICAC 2014 - Proceedings of the 20th International Conference on Automation and Computing: Future Automation, Computing and Manufacturing. Institute of Electrical and Electronics Engineers Inc., p. 237-242 6 p. 6935493

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A Preliminary Investigation on Surface Roughness Assessement of Complex Additive Manufactured Parts Scanned by X-ray Computed Tomography

Lou, S., Abdul-Rahman, H., Zeng, W., Jiang, X. & Scott, P., 7 Feb 2017, 7th Conference on Industrial Computed Tomography. (Open Access Database of Nondestructive Testing).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File

Comparison of Robust Filtration Techniques in Geometrical Metrology

Lou, S., Zeng, W., Jiang, X. & Scott, P. J., 15 Oct 2012, 18th International Conference on Automation and Computing (ICAC): Integration of Design and Engineering. IEEE, p. 224-229 6 p. 6330518

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Complex wavelet transform based surface topography analysis

Zeng, W. & Jiang, X., 2005, Laser Metrology and Machine Performance VII: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2005. Shore, P. (ed.). euspen, p. 304-313 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Construct surface characterization system by assembling functional components dynamically

Lan, X., Jiang, X., Zeng, W. & Blunt, L., 2015, 13th CIRP Conference on Computer Aided Tolerancing. Elsevier, Vol. 27. p. 198-201 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Development of Surface Characterisation Toolbox for Additive Manufactured Components: from Planar Layer Surfaces to Complex Functional Surfaces

Lou, S., Zeng, W., Pagani, L., Abdul-Rahman, H., Jiang, X. & Scott, P., 10 Oct 2017, Proceedings of the Special Interest Group meeting on Dimensional Accuracy and Surface Finish in Additive Manufacturing. p. 124-128 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Geometric Errors and CAD Model Integration Method for Precision Assembly

Zhang, Q., Zeng, W., Lou, S., Jin, X., Scott, P. & Jiang, X., 11 Nov 2019, 2019 25th International Conference on Automation & Computing (ICAC). Yu, H. (ed.). IEEE, p. 75-79 5 p. 8895082

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File

Influence of Exposure Energy Control for High Voltage Pulsed Xenon Lamp on the Lithography Accuracy of Linear Grating

Ren, D., Zhao, Z., Li, B. & Zeng, W., 11 Nov 2019, 2019 25th International Conference on Automation & Computing (ICAC). Yu, H. (ed.). IEEE, p. 285-289 5 p. 8895223

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File

Metrological Characteristics of Complex Wavelet Transform for Surface Topography Analysis

Zeng, W., Jiang, J., Scott, P. & Blunt, L., 2005, Proceedings of the 5th International Conference of the European Society for Precision Rngineering and nanotechnology. Chevrier, F., Taliercio, T., Falgayrettes, P. & Gall-Borrut, P. (eds.). euspen, Vol. 1. p. 254-248 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Morphological component analysis based detection of transient behaviour in environmental vibration for the watt balance

Zeng, W., Jiang, X., Scott, P. & Blunt, L., 2008, Proceedings of the 10th Anniversary International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2008. Van Brussel, H., Spaan, H., Brinksmeier, E. & Burke, T. (eds.). euspen, Vol. 1. p. 275-279 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution