• University of Huddersfield Queensgate Huddersfield HD1 3DH

    United Kingdom

Accepting PhD Students

  • 263 Citations
  • 9 h-Index
20102020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

  • 263 Citations
  • 9 h-Index
  • 29 Article
  • 20 Conference contribution
  • 2 Review article
Filter
Conference contribution
2019

Development of an adaptive toolpath planning strategy for diamond face turning of freeform surfaces

Zhong, W., Tong, Z., Chen, W. & Jiang, X., 2019, European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 19th International Conference and Exhibition, EUSPEN 2019. Leach, R. K., Billington, D., Nisbet, C. & Phillips, D. (eds.). euspen, p. 126-127 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2018

Deterministic fabrication of surface micro-step features using a facet diamond cutting tool

Tong, Z., Jiang, X. & Blunt, L., 5 Jun 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN): June 4th-8th 2018, Venice, IT. Riemer, O., Savio, E., Billington, D., Leach, R. K. & Phillips, D. (eds.). euspen, p. 91-92 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Investigation of kinematics error influence on on-machine measurement for ultra-precision turning

Li, D., Tong, Z., Blunt, L., Ding, F. & Jiang, X., 5 Jun 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN): June 4th-8th 2018, Venice, IT. Riemer, O., Savio, E., Billington, D., Leach, R. K. & Phillips, D. (eds.). euspen, p. 143-144 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
2017

Atomistic investigation of FIB-induced damage in diamond cutting tools under various ion irradiation conditions

Tong, Z., Jiang, X., Bai, Q. & Blunt, L., 26 May 2017, Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017. Phillips, D. (ed.). euspen, p. 95-96 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Calibration of an Interferometric Surface Measurement System on an Ultra-Precision Turning Lathe

Li, D., Jiang, X., Blunt, L., Tong, Z. & Ding, F., 1 Jan 2017, Laser Metrology and Machine Performance XII - 12th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2017. euspen, p. 252-255 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of an ultra-precision grinding technique for the production of structured micro-patches on ceramics and tool steel

Young, C., Blunt, L. & Tong, Z., 26 May 2017, Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017. Phillips, D. (ed.). euspen, p. 207-208 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Development of on-machine measurement for ultra-precision machining

Li, D., Jiang, X., Blunt, L., Tong, Z., Williamson, J. & Young, C., 26 May 2017, Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017. Phillips, D. (ed.). euspen, p. 73-74 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Development of Precision Polishing Machine Based on Parallel-Kinematic System

Mohamed, Z., Blunt, L., Young, C., Tong, Z. & Li, D., 1 Jan 2017, Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017. euspen, p. 273-274 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2016

Atomistic investigation of the wear of nanoscale diamond cutting tools shaped by focused ion beam

Tong, Z., Jiang, X., Bai, Q., Blunt, L. & Luo, X., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Development of ultra-precision abrasive machining of functional structured surfaces

Young, C., Blunt, L., Mohamed, Z. & Tong, Z., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen, 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

The ultra-precision cutting Titanium alloy (Ti-6Al-4V): Effects on its microstructure and surface mechanical properties

Bai, J., Bai, Q., He, X. & Tong, Z., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2014

Investigation of a scale-up manufacturing approach for nanostructures using multi-tip nanoscale diamond tool

Tong, Z., Luo, X. & Sun, J., 2014, Proceedings of the 14th International Conference of the European Society for Precision Engineering and Nanotechnology. Vol. 2. p. 347-350 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2013

An atomistic investigation of FIB process damage on diamond

Tong, Z., Luo, X., Blunt, L. & Jiang, X., 2013, Proceedings of the 13th International Conference of the European Society for Precision Engineering and Nanotechnology: EUSPEN 2013. euspen, Vol. 2. p. 265-268 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

An atomistic investigation of nanometric cutting process using a multi-tip single crystal diamond tool

Tong, Z. & Luo, X., 2013, Laser Metrology and Machine Performance X - 10th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2013. euspen, p. 283-291 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2012

Simulation research on FIB processing: A comparison between silicon and diamond

Tong, Z., Luo, X. C., Liang, Y. C., Bai, Q. S. & Sun, J. N., 2012, ICAC 12 - Proceedings of the 18th International Conference on Automation and Computing: Integration of Design and Engineering. p. 269-273 5 p. 6330521

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)
2011

Deformation mechanism of diamond nanocutting single-crystal copper using molecular dynamics simulatio

Chen, J. X., Liang, Y. C., Yu, X., Wang, Z. G. & Tong, Z., 2011, Advanced Materials. Vol. 239-242. p. 2775-2778 4 p. (Advanced Materials Research; vol. 239-242).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Potential analysis in nanoturning of single crystal silicon using molecular dynamics

Liang, Y. C., Wang, Z. G., Chen, M. J., Chen, J. X. & Tong, Z., 2011, Advanced Materials. Vol. 239-242. p. 3236-3239 4 p. (Advanced Materials Research; vol. 239-242).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Simulation on tensile mechanical properties of single crystal copper nanostructures with different holes configurations

Liang, Y. C., Tong, Z., Bai, Q. S., Chen, J. X. & Wang, Z. G., 2011, Conference Program for the 3rd International Conference on Heterogeneous Materials Mechanics, ICHMM 2011. p. 132-135 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2010

Analysis about diamond tool wear in nano-metric cutting of single crystal silicon using molecular dynamics method

Wang, Z., Liang, Y., Chen, M., Tong, Z. & Chen, J., 2010, 5th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies. PART 1 ed. Vol. 7655. 76550O

Research output: Chapter in Book/Report/Conference proceedingConference contribution

9 Citations (Scopus)

MD simulation of nanocutting process: Removal mechanism, defects evolvement, and characterization

Chen, J. X., Liang, Y. C., Wang, L. Q., Chen, M. J., Tong, Z. & Chen, W. Q., 2010, 5th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies. PART 1 ed. Vol. 7655. 76550J

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)