Find Research Outputs

Search in all content

Filters for Research Output

Search concepts
Selected filters
Conference contribution

Design and experimental implementation of an active stability system for a high speed bogie

Pearson, J. T., Goodall, R. M., Mei, T. X., Shen, S., Kossmann, C., Polach, O. & Himmelstein, G., 10 Feb 2005, The Dynamics of Vehicles on Roads and on Tracks Supplement to Vehicle System Dynamics: Proceedings of the 18th IAVSD Symposium Held in Kanagawa, Japan, August 24-30, 2003. Abe, M. (ed.). SUPPL. ed. CRC Press, Vol. 41. p. 43-52 10 p. (Vehicle System Dynamics; vol. 41, no. Suppl.).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

21 Citations (Scopus)

Design and Implementation of a Tuned Analog Front-End for Extending VLC Transmission Range

Basha, M., Sibley, M. J. N., Mather, P. J. & Makama, A., 7 Mar 2019, Proceedings - 2018 International Conference on Computing, Electronics and Communications Engineering, iCCECE 2018. Excell, P. S., Ali, M., Jones, A., Soomro, S. & Miraz, M. H. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 173-177 5 p. 8658815

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Design and testing of a travelling-wave looped-tube engine for low-cost electricity generators in remote and rural areas

Yu, Z., Backhaus, S. & Jaworski, A. J., 1 Dec 2009, 7th International Energy Conversion Engineering Conference. 2009-4540

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Design a two-stage looped-tube thermoacoustic cooler for thermal management of enclosures

Yahya, S. G., Mao, X. & Jaworski, A. J., 1 Jan 2015, 24th IIR International Congress of Refrigeration, ICR 2015. International Institute of Refrigeration, 8 p. 528

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Design Implications of High-Speed Digital PPM

Sibley, M. J., 1 Nov 1993, Multigigabit Fiber Communication Systems. Kazovsky, L. G. & Liu, K. (eds.). SPIE, Vol. 2024. p. 342-352 11 p. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 2024).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Design in Action: Understanding the Drivers and Barriers to Strategic Use of Design for Innovation

Hoo Na, J., Evans, M., Zitkus, E. & Walters, A., Aug 2018, 21st DMI: Academic Design Management Conference. p. 127-140 14 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File

Designing a first prototype touchscreen interface for older novice users

Bradley, M. D., Zitkus, E., Kodagoda, N., Murad, S., Westaway, A., Gaggero, C., Fitzsimons, D., Barnard, Y. F. & Lloyd, A. D., 6 Apr 2012, Contemporary Ergonomics and Human Factors 2012: Proceedings of the international conference on Ergonomics & Human Factors 2012, Blackpool, UK, 16-19 April 2012. Anderson, M. (ed.). CRC Press, p. 425-426 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Designing as a court of law

Koskela, L., Arroyo, P. & Ballard, G., 18 Jul 2018, Proc. 26th Annual Conference of the International Group for Lean Construction (IGLC). González, V. A. (ed.). Chennai, India., 10 p. 513

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
1 Citation (Scopus)

Designing a Subscription Service for Earthquake Big Data Analysis from Multiple Sources

Omosebi, O., Sotiriadis, S., Asimakopoulou, E., Bessis, N., Trovati, M. & Hill, R., 4 Nov 2015, 2015 10th International Conference on P2P, Parallel, Grid, Cloud and Internet Computing (3PGCIC). Institute of Electrical and Electronics Engineers Inc., p. 601-604 4 p. 7424635

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Designing Spatial UI as a Solution of the Narrow FOV of Microsoft HoloLens: Prototype of Virtual Museum Guide

Hammady, R. & Ma, M., 21 Apr 2019, Augmented Reality and Virtual Reality: The Power of AR and VR for Business. tom Dieck, M. C. & Jung, T. (eds.). Springer International Publishing, p. 217-231 15 p. (Progress in IS; no. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Design management in a design office: Development of the model for 'to-be'

Pikas, E., Koskela, L. & Seppänen, O., Jul 2017, LC3 2017: Proceedings of the 25th Annual Conference of the International Group for Lean Construction (IGLC). Walsh, K., Sacks, R. & Brilakis, I. (eds.). The International Group for Lean Construction, Vol. 2. p. 555-562 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
1 Citation (Scopus)

Design management in a design office: Development of the knowledge base

Pikas, E., Koskela, L. & Liias, R., 2017, IGLC 2017 - Proceedings of the 25th Annual Conference of the International Group for Lean Construction. The International Group for Lean Construction, p. 539-546 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
1 Citation (Scopus)

Design Management in a Design Office: Solving the Problem of Relevance

Pikas, E., Koskela, L. & Seppänen, O., 2017, IGLC 2017 - Proceedings of the 25th Annual Conference of the International Group for Lean Construction. The International Group for Lean Construction, p. 547-554 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Design of a low-cost thermoacoustic electricity generator and its experimental verification

Yu, Z., Jaworski, A. J. & Backhaus, S., 1 Dec 2010, ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis, ESDA2010. Vol. 1. p. 191-199 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Design of a low-cost two-stage thermoacoustic electricity generator for rural communities in developing countries

Abdoulla, K., Yu, Z. & Jaworski, A. J., 1 Dec 2012, 19th International Congress on Sound and Vibration 2012, ICSV 2012. Vol. 4. p. 2566-2573 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Design of a Minimal OSA-CBM Model for an Aircraft Generator

Sreenuch, T., Tsourdos, A. & Gelman, L., 2010, 7th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2010: CM 2010/MFPT 2010. British Institute of Non-Destructive Testing, Vol. 1. p. 1090-1101 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Design of an integrated throughput based control and information system

Duty, D., 30 Mar 1999, Proceedings of the second International SMESME conference. Child, S. (ed.). Plymouth: Manufacturing and Business Systems Research Group, p. 271-281 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Design of a novel, low impact bogie for a freight locomotive

Marsilla, M., Iwnicki, S., Bruni, S., Berg, M., Cervello, S., Hecht, M., Demadonna, A., Hawksbee, S. & Baumgartel, Y., 16 Apr 2018, Proceedings of 7th Transport Research Arena TRA 2018, April 16-19, 2018, Vienna, Austria. 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File

Design of an ultrawideband VHF/UHF antenna for partial discharge detection

Zhang, Y. & Glover, I., 15 Dec 2014, 2014 IEEE International Conference on Signal Processing, Communications and Computing, ICSPCC 2014. Institute of Electrical and Electronics Engineers Inc., p. 487-490 4 p. 6986241

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Design of flat pad aerostatic bearings with the aid of finite element analysis

Barrans, S. M. & Bhat, N., 2003, Laser Metrology and Machine Performance VI: Proceedings of the 6th International Conference on Laser Metrology and Machine Performance. Ford, D. (ed.). WIT Press, Vol. 44. p. 361-370 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Design of high directivity directional couplers in multilayer ceramic technologies

Al-Taei, S., Lane, P. & Passiopoulos, G., 20 May 2001, 2001 IEEE MTT-S International Microwave Symposium Digest. Institute of Electrical and Electronics Engineers Inc., p. 51-54 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

27 Citations (Scopus)

Design of Photonic Crystal Klystrons

Xu, Y. & Seviour, R., Jun 2010, IPAC 2010 : Proceedings of the 1st International Particle Accelerator Conference. Noda, A., Petit-Jean-Genaz, C., Schaa, V., Shirai, T. & Shirakawa, A. (eds.). Joint Accelerator Conferences Website (JACoW), p. 4002-4004 3 p. THPEB057

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
3 Citations (Scopus)

Design of thermoacoustic rig for the analysis of thermal and hydraulic performance of heat exchangers in oscillatory flow

Ilori, OM., Mao, X. & Jaworski, AJ., 2013, Lecture Notes in Engineering and Computer Science. Newswood Limited, Vol. III. p. 1669-1674 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
3 Citations (Scopus)

Design of the running gear for the SUSTRAIL freight vehicle

Iwnicki, S. D., Orlova, A., Jonsson, P. A. & Fartan, M., 2015, Stephenson Conference Research for Railways 2015. Institution of Mechanical Engineers, p. 299-305 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Design of two-stage thermoacoustic stirling engine coupled with push-pull linear alternator for waste heat recovery

Hamood, A., Mao, X. & Jaworski, AJ., 1 Aug 2015, Proceedings of the 24th IIR International Congress of Refrigeration (ICR): Improving Quality of Life, Preserving the Earth, (Yokohama, Japan: 16-22 August 2015). International Institute of Refrigeration, 8 p. 531

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Design optimisation of the head of a high-precision optical polishing machine

Barrans, S. M., Ghurbal, E. M. & Freeman, R., 2003, Laser Metrology and Machine Performance VI: Sixth International Conference on Laser Metrology, Machine Tool, CMM and Robot Performance. Ford, D. (ed.). WIT Press, Vol. 44. p. 325-336 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Design science research in lean construction: Process and outcomes

Da Rocha, C. G., Formoso, C. T., Tzortzopoulos-Fazenda, P., Koskela, L. & Tezel, A., 2012, Proceedings for the 20th Annual Conference of the International Group for Lean Construction: IGLC 2012. 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

10 Citations (Scopus)

Design Should be Managed as a Physical Process, Too

Ballard, G. & Koskela, L., 24 Aug 2009, DS 58-2: Proceedings of ICED'09, Volume 2, Design Theory and Research Methodology. Norell Bergendahl, M., Grimheden, M., Leifer, L., Skogstad, P., Lindemann, U. & Reich, Y. (eds.). The Design Society, Vol. 2. p. 251-262 12 p. (ICED; no. 09).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

Detailed Models for Dynamic Analysis of Railway Vehicles

Magalhães, H., Pombo, J., Ambrósio, J. & Pereira, M., Apr 2014, Proceedings of the Second International Conference on Railway Technology: Research, Development and Maintenance. Pombo, J. (ed.). Civil-Comp Press, 271. (Civil-Comp Proceedings; vol. 104).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Detecting Bearing Faults Using an Ensemble Average Autocorrelation Based Stochastic Subspace Identification

Xu, Y., van Vuuren, P., Tang, X., Gu, F. & Ball, A., Jul 2017, Proceedings of COMADEM 2017. Sherrington, I., Onsy, A., Rao, R., Brooks, H. & Philip, J. (eds.). p. 389-395 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Detection and Diagnosis of Broken Rotor Bar Based on the Analysis of Signals from a Variable Speed Drive

Ashari, D., Lane, M., Ball, A. & Gu, F., 2014, Proceedings of the 3rd International Workshop and Congress on eMaintenance: eMaintenance2014 - Trends in technologies and methodologies, challenges, possibilities and applications. Kumar, U., Karim, R., Parida, A. & Tretten, P. (eds.). p. 41-46 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Detection and Diagnosis of Centrifugal Pump Bearing Faults Based on the Envelope Analysis of Airborne Sound Signals

Daraz, A., Alabied, S., Smith, A., Gu, F. & Ball, A., 1 Jul 2019, 2018 24th International Conference on Automation and Computing (ICAC). Ma, X. (ed.). Institute of Electrical and Electronics Engineers Inc., 6 p. 8749053

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Detection and diagnosis of compound faults in induction motors using electric signals from variable speed drives

Shaeboub, A., Lane, M., Haba, U., Gu, F. & Ball, A. D., 24 Oct 2016, 2016 22nd International Conference on Automation and Computing, ICAC 2016: Tackling the New Challenges in Automation and Computing. Institute of Electrical and Electronics Engineers Inc., p. 306-312 7 p. 7604937

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
6 Citations (Scopus)

Detection and diagnosis of motor stator faults using electric signals from variable speed drives

Shaeboub, A., Abusaad, S., Hu, N., Gu, F. & Ball, A., 2 Nov 2015, Proceedings of the 21st International Conference on Automation & Computing. IEEE, 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
5 Citations (Scopus)

Detection of Chipped Tooth in Gears by the Novel Residual Technology

Gelman, L., Jennions, I. & Petrunin, I., 2011, 8th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2011: CM 2011/MFPT 2011. British Institute of Non-Destructive Testing, Vol. 1. p. 966-977 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Detection of diesel engine injector faults using acoustic emissions

Elamin, F., Fan, Y., Gu, F. & Ball, A., 10 Sep 2010, COMADEM 2010 - Advances in Maintenance and Condition Diagnosis Technologies Towards Sustainable Society, Proc. 23rd Int. Congr. Condition Monitoring and Diagnostic Engineering Management. p. 297-303 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Detection of induction motors faults using instantaneous phase variation

Alshandoli, A. F. S., Gu, F. & Ball, A. D., 30 Sep 2004, Proceedings of the 7th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2004. American Society of Mechanical Engineers (ASME), Vol. 3. p. 715-721 7 p. ESDA2004-58207

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Detection of Low Adhesion in the Railway Vehicle Wheel/Rail Interface: Assessment of Multi-Bodied Simulation Data

Ward, C., Goodall, R., Dixon, R. & Charles, G., 22 Oct 2012, Proceedings of the 2012 UKACC International Conference on Control. IEEE, p. 725-730 6 p. 6334719

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Determination of the material constants of creep damage constitutive equations using Matlab optimization procedure

Igual, J. Z. & Xu, Q., 30 Oct 2015, 2015 21st International Conference on Automation and Computing: Automation, Computing and Manufacturing for New Economic Growth, ICAC 2015. Institute of Electrical and Electronics Engineers Inc., 7313991

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Determining a robust, Pareto optimal geometry for a welded joint

Barrans, S. M. & Radhi, H. E., 2014, Mechanical and Aerospace Engineering V. Trans Tech Publications Ltd, Vol. 1016. p. 39-43 5 p. (Advanced Materials Research; vol. 1016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Determining linearity of optimal plans by operator schema analysis

Chrpa, L., Vallati, M. & McCluskey, T. L., 2013, Proceedings of the 10th Symposium on Abstraction, Reformulation, and Approximation, SARA 2013. p. 34-41 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Determining redundant actions in sequential plans

Chrpa, L., McCluskey, T. L. & Osborne, H., 2012, Proceedings - 2012 IEEE 24th International Conference on Tools with Artificial Intelligence, ICTAI 2012. Vol. 1. p. 484-491 8 p. 6495084

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Determining Representativeness of Training Plans: A Case of Macro-operators

Chrpa, L. & Vallati, M., 13 Dec 2018, 30th IEEE International Conference on Tools with Artificial Intelligence (ICTAI 2018). IEEE, p. 488-492 5 p. 8576079

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
1 Citation (Scopus)

Determining Sample Size in Binary Measurement System

Zhao, Y., He, Z., Blunt, L., Jiang, X., Cao, Y. & Zhang, H., 31 Dec 2008, Fourth International Symposium on Precision Mechanical Measurements. Fei, Y., Fan, K-C. & Lu, R. (eds.). SPIE, Vol. 7130. 7 p. 71305X. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 7130).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Determining Stress in Turbocharger Impellers due to Component Machining Process

Barrans, S., Tabriz, M. S. E. & Ellis, C., 2017, ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers (ASME), Vol. Volume 7A: Structures and Dynamics. 11 p. V07AT30A006

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Determining the Elastic Moduli of the Individual Component Layers of Cylindrical Thermal Barrier Coatings by means of a Mixed Numerical Experimental Technique

Lauwagie, T., Lambrinou, K., Mircea, I., Bartsch, M., Heylen, W. & Van Der Biest, O., 30 Aug 2005, Functionally Graded Materials VIII. Van der Biest, O., Gasik, M. & Vleugels, J. (eds.). Trans Tech Publications Ltd, p. 653-658 6 p. (Materials Science Forum; vol. 492-493).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Deterministic fabrication of surface micro-step features using a facet diamond cutting tool

Tong, Z., Jiang, X. & Blunt, L., 5 Jun 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN): June 4th-8th 2018, Venice, IT. Riemer, O., Savio, E., Billington, D., Leach, R. K. & Phillips, D. (eds.). euspen, p. 91-92 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Developing a conceptual framework for investigating the resilience of construction SMEs and their supply chains against extreme weather events

Wedawatta, G., Ingirige, B. & Amaratunga, D., 1 Dec 2010, COBRA 2010: Construction, Building and Real Estate Research Conference of the Royal Institution of Chartered Surveyors. Royal Institution of Chartered Surveyors

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Developing a Domain Ontology of Information Science (OIS)

Sawsaa, A. F. & Lu, J., 1 Nov 2012, International Conference on Information Society, i-Society 2012, Proceedings. IEEE, Vol. 1. p. 447-452 6 p. 6285013

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Developing a Multi-professional e-Learning Mentor Update Package

Ousey, K. J. & White, S. A., Feb 2009, 2009 International Conference on Mobile, Hybrid, and On-line Learning. IEEE Computer Society, p. 103-107 5 p. 4782611

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)