Find Research Outputs

Search in all content

Filters for Research Output

Search concepts
Selected filters
Conference contribution

An Investigation into the Use of Synthetic Jets for the Control of Surface Unsteadiness due to Vortex Breakdown

Watson, M., Jaworski, A. J. & Wood, N. J., 28 Jun 2004, 2nd AIAA Flow Control Conference: Fluid Dynamics and Co-located Conferences. 12 p. AIAA-2004-2212

Research output: Chapter in Book/Report/Conference proceedingConference contribution

An investigation of acoustic emission responses of a self aligning spherical journal bearing

Raharjo, P., Abdusslam, S. A., Wang, T., Gu, F. & Ball, A. D., Aug 2011, 8th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2011, CM 2011/MFPT 2011. British Institute of Non-Destructive Testing, Vol. 1. p. 424-439 16 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

An investigation of a single shot dual wavelength polarised interferometer which uses Carre and Four Step Phase Shift Algorithms

Al-Bashir, S., Muhamedsalih, H., Gao, F. & Jiang, X., 5 Jun 2018, European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 18th International Conference and Exhibition, EUSPEN 2018. Riemer, O., Savio, E., Billington, D., Leach, R. K. & Phillips, D. (eds.). euspen, p. 113-114 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File

An investigation of electrical motor parameters in a sensorless variable speed drive for machine fault diagnosis

Hamad, N., Brethee, K. F., Gu, F. & Ball, A. D., 24 Oct 2016, 22nd International Conference on Automation and Computing: Tackling the New Challenges in Automation and Computing. Institute of Electrical and Electronics Engineers Inc., p. 329-335 7 p. 7604941

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
4 Citations (Scopus)

An Investigation of factors affecting and optimizing material removal rate in computer controlled ultra-precision polishing

Ho, L. T., Cheung, C. F., Blunt, L. & Zeng, S., 2015, Precision Engineering and Nanotechnology V. Trans Tech Publications Ltd, Vol. 625. p. 446-452 7 p. (Key Engineering Materials; vol. 625).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

An investigation of the effect of cloud computing on network management

Panneerselvam, J., Liu, L., Hill, R., Zhan, Y. & Liu, W., 18 Oct 2012, 2012 IEEE 14th International Conference on High Performance Computing and Communication & 2012 IEEE 9th International Conference on Embedded Software and Systems. IEEE Computer Society, p. 1794-1799 6 p. 6332403

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Citations (Scopus)

An investigation on energy recovery analysis of active suspension system

Wang, R., Tran, V. T., Gu, F. & Ball, A. D., 2013, ICAC 2013 - Proceedings of the 19th International Conference on Automation and Computing: Future Energy and Automation. IEEE Computer Society, p. 287-292 6 p. 6662053

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

An investigation on generation of debris at the stem cement interface

Zhang, H., Brown, L., Blunt, L. & Barrans, S., 28 May 2008, 8th World Biomaterials Congress 2008. Vol. 4. p. 1768 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

An investigation on switching behaviour: Shifting creative cycles from hand to digital and back again

Evans, C., 2017, IDEA OF SELF IN PRACTICE- BASED RESEARCH. Vol. 4.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

An Iterative Approach for Development of Safety-Critical Software and Safety Arguments

Ge, X., Paige, R. F. & McDermid, J. A., 7 Sep 2010, Agile 2010 Conference. Fruedenberg, S. & Chao, J. (eds.). Los Alamitos, CA: IEEE, p. 35-43 9 p. 5562808

Research output: Chapter in Book/Report/Conference proceedingConference contribution

35 Citations (Scopus)

A Non-Scaling FFAG Gantry Design for the PAMELA Project

Fenning, R., Khan, A., Kelliher, D., Machida, S. & Edgecock, T. R., Jun 2010, IPAC 2010: Proceedings of 1st International Particle Accelerator Conference. Noda, A., Petit-Jean-Genaz, C., Schaa, V. R. W., Shirai, T. & Shirakawa, A. (eds.). Joint Accelerator Conferences Website (JACoW), p. 4593-4595 3 p. THPE034

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

An open-access database of 3D microphone array recordings

Lee, H. & Johnson, D., 8 Oct 2019, 147th Audio Engineering Society Convention: AES 2019. Andreopoulou, A. & Boren, B. (eds.). Audio Engineering Society, 6 p. 543

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File

An Optimal Design of Printed Log-Periodic Antenna for L-Band EMC Applications

Mistry, K. K., Lazaridis, P. I., Zaharis, Z. D., Xenos, T. D., Tziris, E. N. & Glover, I. A., 25 Jun 2018, 2018 IEEE International Symposium on Electromagnetic Compatibility and 2018 IEEE Asia-Pacific Symposium on Electromagnetic Compatibility, EMC/APEMC 2018. Institute of Electrical and Electronics Engineers Inc., p. 1150-1155 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File

An Optimum Sensor Selection Design Framework Applied to an Electro-Magnetic Suspension System

Michail, K., Zolotas, A. & Goodall, R., 23 Dec 2010, Conference on Control and Fault-Tolerant Systems, SysTol'10: Final Program and Book of Abstracts. IET, p. 684-689 6 p. 5676004

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

An outline of a complementary inspection system for micro-electro-mechanical system (Mems) devices based on radiography and plenoptic camera

Chong, A., Feng, G., Kanfoud, J. & Gan, T. H., 1 Sep 2018, Advances in Manufacturing Technology XXXII: Proceedings of the 16th International Conference on Manufacturing Research, incorporating the 33rd National Conference on Manufacturing Research, September 11-13, 2018, University of Skövde Sweden. Thorvald, P. & Case, K. (eds.). IOS Press BV, Vol. 8. p. 33-38 6 p. (Advances in Transdisciplinary Engineering; vol. 8).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A Novel Air Index Scheme for Twig Queries in On-Demand XML Data Broadcast

Qin, Y., Sun, W., Zhang, Z., Yu, P., He, Z. & Chen, W., 2009, Database and Expert Systems Applications: 20th International Conference, DEXA 2009, Linz, Austria, August 31 – September 4, 2009. Proceedings. Bhowmick, S. S., Küng, J. & Wagner, R. (eds.). Springer-Verlag Berlin Heidelberg, Vol. LNCS 5690. p. 412-426 15 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 5690 LNCS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

11 Citations (Scopus)

A novel application of image processing for the detection of rail surface RCF damage and incorporation in a crack growth model

Sambo, B., Bevan, A. & Pislaru, C., 13 May 2016, The International Conference on Railway Engineering (ICRE) 2016. Brussels, Belgium : Institution of Engineering and Technology, 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File
3 Citations (Scopus)

A novel approach for ANFIS modelling based on Grey system theory for thermal error compensation

Abdulshahed, A. M., Longstaff, A. P. & Fletcher, S., 17 Oct 2014, 2014 14th UK Workshop on Computational Intelligence, UKCI 2014 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 6930155

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

A novel approach to modelling and simulation of the dynamic behaviour of the wheel-rail interface

Anyakwo, A., Pislaru, C., Ball, A. & Gu, F., 2011, Proceedings of 2011 17th International Conference on Automation and Computing, ICAC 2011. p. 283-288 6 p. 6084942

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

A Novel Attack on a FPGA based True Random Number Generator

Johnson, A., Chakraborty, R. S. & Mukhopadhyay, D., 4 Oct 2015, Proceedings of the WESS'15: Workshop on Embedded Systems Security. Association for Computing Machinery (ACM), 6 p. 6

Research output: Chapter in Book/Report/Conference proceedingConference contribution

7 Citations (Scopus)

A novel camera calibration method for deflectometry system

Gao, F., Xu, Y., Ren, H., Zhang, Z. & Jiang, X., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A novel design of a 10-dipole log-periodic antenna with LTE-800 and GSM-900 band rejection

Mistry, K., Lazaridis, P., Hong Lo, T., Zaharis, Z., Glover, I. & Liu, B., 3 Oct 2019, 2019 IEEE MTT-S International Conference on Numerical Electromagnetic and Multiphysics Modeling and Optimization (NEMO). Institute of Electrical and Electronics Engineers Inc., 4 p. 8853709

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
File

A Novel Group Decision Making Approach using Pythagorean Fuzzy Preference Relation

Zhang, H., Chen, T., Wang, Z., Chen, Y. & Chen, C., Jul 2020, 2020 IEEE International Conference on Fuzzy Systems (FUZZ-IEEE). IEEE, 6 p. 9177738. (IEEE International Fuzzy Systems conference proceedings).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A Novel Hybrid Engineering Methodology to Enhance Collaboration During the Design and Development of Meta Product Services

Iram, S., Fernando, T. & Bassanino, M., 20 Sep 2016, Collaboration in a Hyperconnected World: 17th IFIP WG 5.5 Working Conference on Virtual Enterprises, PRO-VE 2016, Porto, Portugal, October 3-5, 2016, Proceedings. Afsarmanesh, H., Camarinha-Matos, L. M. & Lucas Soares, A. (eds.). Springer, Cham, p. 385-393 (IFIP Advances in Information and Communication Technology; vol. 480).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A novel hyper-crossing tool path generation algorithm for subaperture polishing

Reynolds, C., Walker, D., Yu, G. & Li, H., 10 Jul 2018, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation III. Navarro, R. & Geyl, R. (eds.). SPIE, Vol. 10706. 11 p. 107060F. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 10706).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

A novel method based on Bayesian regularized artificial neural networks for measurement uncertainty evaluation

Papananias, M., Fletcher, S., Longstaff, A. & Mengot, A., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen, 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
2 Citations (Scopus)

A novel method to analyze EEG synchrony for the early diagnosis of Alzheimer's disease in optimized frequency bands

Al-jumeily, D., Iram, S., Vialatte, F. & Fergus, P., Jan 2014, 2014 IEEE 11th Consumer Communications and Networking Conference (CCNC). IEEE, 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A novel method to improve the resolution of envelope spectrum for bearing fault diagnosis based on a wireless sensor node

Feng, G., Zhen, D., Tian, X., Gu, F. & Ball, A. D., 2015, Vibration Engineering and Technology of Machinery - Proceedings of VETOMAC X, 2014. Kluwer Academic Publishers, Vol. 23. p. 765-775 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

A novel processor architecture for real-time control

Xiaofeng, W., Chouliaras, V., Nunez-Yanez, J., Goodall, R. & Vladimirova, T., Sep 2006, Advances in Computer Systems Architecture - 11th Asia-Pacific Conference, ACSAC 2006, Proceedings. Springer Verlag, p. 270-280 11 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 4186 LNCS).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

A novel surface temperature measurement system for industrial applications

Tansley, D., Fletcher, S. & Longstaff, A., 2015, Laser Metrology and Machine Performance XI - 11th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2015. euspen, p. 51-60 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

A Novel Wavelet Thresholding Method for Vibration Data Denoising and Diagnostic Feature Enhancement in Condition Monitoring

Rabeyee, K., Xu, Y., Gu, F. & Ball, A. D., 11 Nov 2019, 2019 25th IEEE International Conference on Automation and Computing, ICAC 2019: Improving Productivity through Automation and Computing. Yu, H. (ed.). Institute of Electrical and Electronics Engineers Inc., 6 p. 8894986

Research output: Chapter in Book/Report/Conference proceedingConference contribution

An Overview of the Marketed Functionalities of Web-based Construction Collaboration Extranets

Liu, N., Kagioglou, M. & Liu, L., 10 May 2011, International Conference on Information Science and Technology. Institution of Electrical Engineers (IEE), p. 306-313 8 p. (International Conference on Information Science and Technology).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

An SCC Recursive Meta-Algorithm for Computing Preferred Labellings in Abstract Argumentation

Cerutti, F., Giacomin, M., Vallati, M. & Zanella, M., 4 May 2014, 14th International Conference on the Principles of Knowledge Representation and Reasoning, KR 2014. AAAI press, p. 42-51 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
22 Citations (Scopus)

Answer set programming for qualitative spatio-temporal reasoning: Methods and experiments

Brenton, C., Faber, W. & Batsakis, S., 13 Nov 2016, Technical Communications of the 32nd International Conference on Logic Programming: ICLP 2016. Carro, M., King, A., Saeedloei, N. & Vos, M. D. (eds.). Schloss Dagstuhl- Leibniz-Zentrum fur Informatik GmbH, Dagstuhl Publishing, Vol. 52. p. 4:1-4:15 15 p. 4

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
6 Citations (Scopus)

An ultrawideband patch antenna for UHF detection of partial discharge

Zhang, Y., Upton, D., Jaber, A., Khan, U., Saeed, B., Ahmed, H., Mather, P., Atkinson, R., Lazaridis, P., Vieira, M. D. F. Q. & Glover, I., Oct 2015, 2015 1st URSI Atlantic Radio Science Conference (URSI AT-RASC). Institute of Electrical and Electronics Engineers Inc.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

An ultrawideband patch antenna for UHF detection of partial discharge

Zhang, Y., Upton, D., Jaber, A., Khan, U., Saeed, B., Ahmed, H., Mather, P., Atkinson, R., Lazaridis, P., Vieira, M. F. Q. & Glover, I. A., 21 Oct 2015, 2015 1st URSI Atlantic Radio Science Conference, URSI AT-RASC 2015. Institute of Electrical and Electronics Engineers Inc., 7302824

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

AOG-ags Algorithms and Applications

Wang, L., Lu, J., Lu, J. & Yip, J., 10 Sep 2007, Advanced Data Mining and Applications : Third International Conference, ADMA 2007, Proceedings. Alhajj, R., Gao, H., Li, J., Li, X. & Zaïane, O. R. (eds.). 1 ed. Springer, Vol. 4632. p. 323-334 12 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 4632 LNAI).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A particle swarm optimisation-based grey prediction model for thermal error compensation on CNC machine tools

Abdulshahed, A. M., Longstaff, A. P. & Fletcher, S., 2015, Laser Metrology and Machine Performance XI - 11th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2015. euspen, p. 363-372 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
2 Citations (Scopus)

A permissive graphical patcher for SuperCollider synths

Dufeu, F., Sep 2016, ICMC 2016 - 42nd International Computer Music Conference, Proceedings. HKU University of the Arts Utrecht, HKU Music and Technology, p. 134-139 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

A pilot aided averaging channel estimator for DVB-T2

Zettas, S., Lazaridis, P. I., Zaharis, Z. D., Kasampalis, S. & Cosmas, J., Oct 2013, BMSB 2013 - IEEE International Symposium on Broadband Multimedia Systems and Broadcasting. IEEE Computer Society, 8 p. 6621712

Research output: Chapter in Book/Report/Conference proceedingConference contribution

5 Citations (Scopus)

A portable capacitance probe for detection of interface levels in multi-phase flows – A case study

Jaworski, A. J., Dyakowski, T. & Davies, G. A., 1 Jan 1999, 1st World Congress on Industrial Process Tomography. International Society for Industrial Process Tomography, p. 289-296 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

14 Citations (Scopus)

Apparent source width and listener envelopment in relation to source-listener distance

Lee, H., 1 Jan 2013, 52nd AES International Conference 2013: Sound Field Control. Audio Engineering Society, p. 156-161 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Application of a Twin-plane Electrical Capacitance Tomography Sensor for Characterising Bubble Behaviour in a Gas-solids Fluidized Bed

Li, X., Jaworski, A. & Mao, X., 1 Jul 2016, Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2017, WCE 2017, 5-7 July, 2017, London, U.K. Ao, S. I., Gelman, L., Hukins, D. W. L., Hunter, A. & Korsunsky, A. M. (eds.). Newswood Limited, Vol. 2. p. 1100-1105 6 p. (Lecture Notes in Engineering and Computer Science; vol. 2230).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Application of DTF method in disturbance propagation analysis of complex chemical process

Li, K., Xie, L., Ge, X. & Wang, X., 2014, Proceedings of the 11th IEEE International Conference on Networking, Sensing and Control, ICNSC 2014. IEEE Computer Society, p. 685-689 5 p. 6819708

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Application of EKF for an electro-hydraulic servo system using model-based approach

Zheng, L., Wu, L. L., Gu, X., Shi, Z. & Ball, A., 2013, Applied Scientific Research and Engineering Developments for Industry. Vol. 385-386. p. 609-613 5 p. (Applied Mechanics and Materials; vol. 385-386).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Application of electrical impedance spectroscopy for measurement of the composition of oil-water mixture

Jaworski, A. J. & Dyakowski, T., 27 May 2001, Proceedings of the 4th International Conference on Multiphase Flow: 27 May – 1 June, 2001, New Orleans, Louisiana, USA. 7 p. 845

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Application of Language Models to Suspect Prioritisation and Suspect Likelihood in Serial Crimes

Bache, R., Crestani, F., Canter, D. & Youngs, D., 10 Sep 2007, Third International Symposium on Information Assurance and Security. Zhang, N., Abraham, A., Shi, Q. & Thomas, J. (eds.). Institute of Electrical and Electronics Engineers, p. 399-404 6 p. 4299806

Research output: Chapter in Book/Report/Conference proceedingConference contribution

11 Citations (Scopus)

Application of minimum entropy deconvolution in diagnosis of reciprocating compressor faults based on airborne acoustic analysis

Mondal, D., Gu, F. & Ball, A., 1 Aug 2019, Sixteenth International Conference on Condition Monitoring and Asset Management (CM 2019) . British Institute of Non-Destructive Testing, Vol. 1. 139

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Application of monoclonal antibodies to the characterisation and improved serodiagnosis of equine Babesias

Bruning-Richardson, A., 1999, Proceedings of the Eighth International Conference on Equine Infectious Diseases. Wernery, U., Wade, JF., Mumford, JA. & Kaaden, OR. (eds.). R&W Publications (Newmarket), p. 223-227 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Application of multi sensor data fusion based on principal component analysis and artificial neural network for machine tool thermal monitoring

Potdar, A. A., Longstaff, A. P., Fletcher, S. & Mian, N. S., 2015, Laser Metrology and Machine Performance XI - 11th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2015. euspen, p. 224-233 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
3 Citations (Scopus)