Find Research outputs

Search results

• Comparative Evaluation of Simplified and Complex IPM Machine Models on Control Development for Traction Applications

  Hoang, K. D., Atallah, K., Birchall, J. & Calverley, S., 9 Dec 2019, Proceedings: IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society. IEEE, p. 945-950 6 p. 8926742. (IECON Proceedings (Industrial Electronics Conference)).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Comparative evidence on the value relevance of IFRS-based accounting information in Germany and the UK

  Elbakry, A. E., Nwachukwu, J. C., Abdou, H. A. & Elshandidy, T., 1 Jan 2017, In: Journal of International Accounting, Auditing and Taxation. 28, p. 10-30 21 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  19 Citations (Scopus)

• Comparative irradiation response of an austenitic stainless steel with its high-entropy alloy counterpart

  Tunes, M. A., Greaves, G., Bei, H., Edmondson, P. D., Zhang, Y., Donnelly, S. E. & Schön, C. G., 1 May 2021, In: Intermetallics. 132, 13 p., 107130.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File
  6 Citations (Scopus)

• Comparative performance measures, globalising strategies and literacy policy in Scotland

  Tett, L., Jan 2014, In: Globalisation, Societies and Education. 12, 1, p. 127-142 16 p.

  Research output: Contribution to journal › Article › peer-review
  9 Citations (Scopus)

• Comparative performance study of alternate fault-tolerant inverter configurations for direct torque control-based three-phase PM BLAC drives under single-phase open-circuit fault

  Hoang, K. D. & Zhu, Z. Q., 19 Apr 2016, 8th IET International Conference on Power Electronics, Machines and Drives (PEMD 2016). CP684 ed. IET Conference Publications, 6 p. 7739381

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  2 Citations (Scopus)

• Comparative physical, mechanical and crystallographic properties of a series of gemfibrozil salts

  David, S. E., Ramirez, M., Timmins, P. & Conway, B. R., Nov 2010, In: Journal of Pharmacy and Pharmacology. 62, 11, p. 1519-1525 7 p.

  Research output: Contribution to journal › Article › peer-review
  13 Citations (Scopus)

• Comparative point prevalence survey of antimicrobial consumption between a hospital in Northern Ireland and a hospital in Jordan

  Elhajji, F. D., Al-Taani, G. M., Anani, L., Al-Masri, S., Abdalaziz, H., Qabba'H, SA. H., Al Bawab, A. Q., Scott, M., Farren, D., Gilmore, F., Versporten, A., Goossens, H. & Aldeyab, M. A., 12 Nov 2018, In: BMC Health Services Research. 18, p. 1-8 8 p., 849.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  12 Citations (Scopus)

• Comparative quantification of focal and diffuse visual field loss by the SPARK Precision threshold algorithm and SITA

  Foo, S. K., Cubbidge, R. P. & Heitmar, R., 28 Dec 2021, (E-pub ahead of print) In: Graefe's Archive for Clinical and Experimental Ophthalmology. 11 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Comparative reflections upon the Assisted Dying Bill 2013: A plea for a more European approach

  Halliday, S., 2013, In: Medical Law International. 13, 2-3, p. 135-167 33 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File
  3 Citations (Scopus)

• Comparative Research and Critical Child Protection Studies

  Parton, N., 1 Apr 2022, In: Social Sciences. 11, 4, 15 p., 156.

  Research output: Contribution to journal › Article › peer-review

  Open Access

• Comparative studies on the processing and performance of carbon nanotube and nanofibre based multi-scale composites

  Rana, S., Bhattacharyya, A., Parveen, S., Fangueiro, R., Alagirusamy, R. & Joshi, M., 2014, ECCM16–16th European Conference on Composite Materials. European Conference on Composite Materials, ECCM, 8 p. (ECCM16–16th European Conference on Composite Materials).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter › peer-review

  Open Access

• Comparative Study Between Interior and Surface Permanent Magnet Traction Machine Designs

  Yang, R., Schofield, N. & Emadi, A., 25 Jul 2016, 2016 IEEE Transportation Electrification Conference and Expo, ITEC 2016. Institute of Electrical and Electronics Engineers Inc., 6 p. 7520249

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  7 Citations (Scopus)

• Comparative study of adaptive multiuser detections in hybrid direct-sequence time-hopping ultrawide bandwidth systems

  Ahmed, Q. Z. & Yang, L. L., 28 Feb 2014, Handbook of Research on Progressive Trends in Wireless Communications and Networking. Matin, M. A. (ed.). IGI Global, p. 459-478 20 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter › peer-review

• Comparative study of ANN and ANFIS predprediction models for thermal error compensation on CNC machine tools

  Abdulshahed, A., Longstaff, A., Fletcher, S. & Myers, A., 1 Mar 2013, Laser Metrology and Machine Performance X : 10th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2013. Blunt, L. (ed.). euspen, p. 79-89 11 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  22 Citations (Scopus)

• Comparative study of broadcasting antenna array optimization using evolutionary algorithms

  Lazaridis, P. I., Tziris, E. N., Zaharis, Z. D., Xenos, T. D., Holmes, V., Cosmas, J. P. & Glover, I., 20 Oct 2016, 2016 URSI Asia-Pacific Radio Science Conference, URSI AP-RASC 2016. Institute of Electrical and Electronics Engineers Inc., p. 1299-1301 3 p. 7601166

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• Comparative study of current vector control performance of alternate fault tolerant inverter topologies for three-phase PM brushless AC machine with one phase open-circuit fault

  Hoang, K. D., Zhu, Z. Q., Foster, M. P. & Stone, D. A., 26 Jul 2010, 5th IET International Conference on Power Electronics, Machines and Drives, PEMD 2010. 563 CP ed. IET Conference Publications, 6 p. 5523742

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  31 Citations (Scopus)

• Comparative study of delay factors in Libyan and the UK construction industry

  Shebob, A., Dawood, N., Shah, R. K. & Xu, Q., 9 Nov 2012, In: Engineering, Construction and Architectural Management. 19, 6, p. 688-712 25 p.

  Research output: Contribution to journal › Article › peer-review
  31 Citations (Scopus)

• Comparative Study of Diethylaminoethyl-Chitosan and Methylglycol-Chitosan as Potential Non-Viral Vectors for Gene Therapy

  Raik, S. V., Andranovitš, S., Petrova, V. A., Xu, Y., Lam, J. K-W., Morris, G., Brodskaia, A. V., Casettari, L., Kritchenkov, A. S. & Skorik, Y. A., 14 Apr 2018, In: Polymers. 10, 4, 15 p., 442.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File
  33 Citations (Scopus)

• Comparative Study of Lateral Profile Knife-Edge Diffraction and Ray Tracing Technique Using GTD in Urban Environment

  Mokhtari, H. & Lazaridis, P., Jan 1999, In: IEEE Transactions on Vehicular Technology. 48, 1, p. 255-261 7 p.

  Research output: Contribution to journal › Article › peer-review
  3 Citations (Scopus)

• Comparative study of material loss at the taper interface in retrieved metal-on-polyethylene and metal-on-metal femoral components from a single manufacturer

  Bills, P., Racasan, R., Bhattacharya, S., Blunt, L. & Isaac, G., 1 Aug 2017, In: Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 231, 8, p. 683-690 8 p.

  Research output: Contribution to journal › Article › peer-review
  2 Citations (Scopus)

• Comparative Study of Neural Network Training Applied to Adaptive Beamforming of Antenna Arrays

  Zaharis, Z. D., Gotsis, K. A. & Sahalos, J. N., 20 Mar 2012, In: Progress in Electromagnetics Research. 126, p. 269-283 15 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  18 Citations (Scopus)

• Comparative study of Partial Discharge emulators for the calibration of Free-Space radiometric measurements

  Jaber, A., Lazaridis, P., Saeed, B., Zhang, Y., Khan, U., Upton, D., Ahmed, H., Mather, P., Vieira, M. F. Q., Atkinson, R., Judd, M. & Glover, I. A., 24 Oct 2016, 2016 22nd International Conference on Automation and Computing, ICAC 2016: Tackling the New Challenges in Automation and Computing. Institute of Electrical and Electronics Engineers Inc., p. 313-316 4 p. 7604938

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  7 Citations (Scopus)

• Comparative study of Radio Mobile and ICS Telecom propagation prediction models for DVB-T

  Fratu, O., Martian, A., Craciunescu, R., Vulpe, A., Halunga, S., Zaharis, Z. D., Lazaridis, P. & Kasampalis, S., 6 Aug 2015, 2015 IEEE International Symposium on Broadband Multimedia Systems and Broadcasting (BMSB), (Ghent, 17-19 June 2015). Institute of Electrical and Electronics Engineers Inc., 6 p. 7177260

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  14 Citations (Scopus)

• Comparative Study of the Discrete Cosine Transform and the Discrete Orthogonal Gauss-Hermite Transform for Biomedical Signal Compression

  Lazaridis, P., Debarge, G., Gallion, P., Zaharis, Z., Kampitaki, D., Hatzigaidas, A., Papastergiou, A. & Grammatikopoulos, G., Nov 2006, In: WSEAS Transactions on Information Science and Applications. 3, 11, p. 2264-2269 6 p.

  Research output: Contribution to journal › Article

• Comparative study of the electromagnetic performance of switched flux permanent magnet machines

  Zhu, Z. Q., Al-Ani, M., Lee, B. & Liu, X., 1 Apr 2015, In: IET Electric Power Applications. 9, 4, p. 297-306 10 p.

  Research output: Contribution to journal › Article › peer-review
  19 Citations (Scopus)

• Comparative study of the surface roughness of Nicalon and Tyranno silicon carbide fibres

  Vanswijgenhoven, E., Lambrinou, K., Wevers, M. & Van Der Biest, O., Nov 1998, In: Composites Part A: Applied Science and Manufacturing. 29, 11, p. 1417-1423 7 p.

  Research output: Contribution to journal › Article › peer-review
  10 Citations (Scopus)

• Comparative study of torque-speed characteristics of alternate switched-flux permanent magnet machine topologies

  Zhu, Z. Q., Al-Ani, M. M. J., Liu, X., Hasegawa, M., Pride, A. & Deodhar, R., 19 Jul 2012, 6th IET International Conference on Power Electronics, Machines and Drives, PEMD 2012. 592 CP ed. Institution of Engineering and Technology, Vol. 2012.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  15 Citations (Scopus)

• Comparative study of two non-intrusive measurement methods for bubbling gas-solids fluidized beds: Electrical capacitance tomography and pressure fluctuations

  Li, X., Jaworski, A. J. & Mao, X., 1 Aug 2018, In: Flow Measurement and Instrumentation. 62, p. 255-268 14 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File
  22 Citations (Scopus)

• Comparative Study of Vibration and Acoustic Emission Strategies Applied on Monitoring of Diesel Engine Fault

  Okhionkpamwonyi, S., Li, G., Xu, Y., Gu, F. & Ball, A., 16 May 2021, Proceedings of IncoME-V & CEPE Net-2020: Condition Monitoring, Plant Maintenance and Reliability. Zhen, D., Wang, D., Wang, T., Wang, H., Huang, B., Sinha, J. K. & Ball, A. D. (eds.). 1st ed. Cham: Springer Nature Switzerland AG, Vol. 105. p. 310-319 10 p. (Mechanisms and Machine Science; vol. 105).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Comparative study on interferometric techniques for measurement of the optical properties of a fibre

  Hamza, A. A., Sokkar, T. Z. N., El-Farahaty, K. A. & El-Dessouky, H. M., 1999, In: Journal of Optics A: Pure and Applied Optics. 1, 1, p. 41-50 10 p.

  Research output: Contribution to journal › Article › peer-review
  11 Citations (Scopus)

• Comparing child protection systems: Towards a global perspective

  Parton, N., 16 Feb 2017, The Routledge Handbook of Global Child Welfare. Dolan, P. & Frost, N. (eds.). Abingdon, Oxon.: Routledge, p. 225-242 18 p. (Routledge International Handbooks).

  Research output: Chapter in Book/Report/Conference proceeding › Chapter › peer-review
  3 Citations (Scopus)

• Comparing factors related to school-bullying and cyber-bullying

  Tzani Pepelasi, K., Ioannou, M., Synnott, J. & Ashton, S-A., 12 Jun 2018, In: Crime Psychology Review. 4, 1, p. 1-25 25 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File
  7 Citations (Scopus)

• Comparing health, stress, wellbeing and greenspace across six cities in three continents

  Neale, C., Besa, M. C., Dickin, S., Hongsathavij, V., Kuldna, P., Muhoza, C., Pravalprukskul, P. & Cinderby, S., 1 Oct 2020, In: Cities and Health. 4, 3, p. 290-302 13 p.

  Research output: Contribution to journal › Article › peer-review
  4 Citations (Scopus)

• Comparing Mamdani Sugeno Fuzzy Logic and RBF ANN Network for PV Fault Detection

  Dhimish, M., Holmes, V., Mehrdadi, B. & Dales, M., 1 Mar 2018, In: Renewable Energy. 117, p. 257-274 18 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  124 Citations (Scopus)

• Comparing production design activities and location-based planning tools

  Biotto, C., Kagioglou, M., Koskela, L. & Tzortzopoulos, P., 1 Jul 2017, LC3 2017: Proceedings of the 25th Annual Conference of the International Group for Lean Construction (IGLC). Walsh, K., Sacks, R. & Brilakis, I. (eds.). The International Group for Lean Construction, Vol. 2. p. 705-712 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  5 Citations (Scopus)

• Comparing self-affirmation manipulations to reduce alcohol consumption in university students

  Vogt, K., Stephenson, J. & Norman, P., 3 Nov 2021, (E-pub ahead of print) In: Journal of American College Health. 10 p.

  Research output: Contribution to journal › Article › peer-review
  1 Citation (Scopus)

• Comparing the Methods of A3 and Canvas

  Koskela, L., Broft, R. D., Pikas, E. & Tezel, A., 6 Jul 2020, Proceedings of the 28th Annual Conference of the International Group for Lean Construction: (IGCL 28). Tommelein, I. D. & Daniel, E. (eds.). Berkeley, USA: The International Group for Lean Construction, p. 13-24 12 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• Comparing the reimbursement of new medicines between Australia and New Zealand

  Ragupathy, R. & Babar, Z. UD. D., 1 Jan 2016, In: Australian Health Review. 40, 1, p. 118-119 2 p.

  Research output: Contribution to journal › Letter › peer-review
  1 Citation (Scopus)

• Comparison and appraisal of techniques for the determination of material loss from tapered orthopaedic surfaces

  Dransfield, K., Addinall, K. & Bills, P., 15 Aug 2021, In: Wear. 478-479, 16 p., 203903.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

• Comparison between ASME and ISO Standards on surface texture

  Hu, K., Jiang, X., Liu, X. & Xu, Z., 13 Oct 2006, Third International Symposium on Precision Mechanical Measurements. Fan, K-C., Gao, W., Yu, X., Huang, W. & Hu, P. (eds.). SPIE, Vol. 6280. 7 p. 62801W. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 6280 ).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Comparison between multiobjective population-based algorithms in mechanical problem

  Radhi, H. E. & Barrans, S. M., 28 Feb 2012, Mechanical and Aerospace Engineering: ICMAE2011. Fan, W. (ed.). Scientific.net, Vol. 1. p. 2383-2389 7 p. (Applied Mechanics and Materials; vol. 110-116).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• Comparison between the SIMS and MEIS techniques for the characterization of ultra shallow arsenic implants

  Giubertoni, D., Bersani, M., Barozzi, M., Pederzoli, S., Iacob, E., van den Berg, J. A. & Werner, M., 30 Jul 2006, In: Applied Surface Science. 252, 19, p. 7214-7217 4 p.

  Research output: Contribution to journal › Article › peer-review
  18 Citations (Scopus)

• Comparison between two fast threshold strategies: SPARK and SITA in normal subjects

  Foo, S. K., Cubbidge, R. P. & Heitmar, R., 1 Jul 2021, In: European Journal of Ophthalmology. 31, 4, p. 1870-1876 7 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access
  1 Citation (Scopus)

• Comparison of adjustment speeds in target research and development and capital investment: What did the financial crisis of 2007 change?

  Coldbeck, B. & Ozkan, A., 1 Mar 2018, In: Journal of Business Research. 84, p. 1-10 10 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File
  13 Citations (Scopus)

• Comparison of alternate mechanically adjusted variable flux switched flux permanent magnet machines

  Zhu, Z. Q., Al-Ani, M. M. J., Liu, X., Hasegawa, M., Pride, A. & Deodhar, R., 12 Nov 2012, 2012 IEEE Energy Conversion Congress and Exposition, ECCE 2012. Institution of Engineering and Technology, p. 3655-3662 8 p. 6342481

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  10 Citations (Scopus)

• Comparison of bacterial counts in expressed breast milk following standard or strict infection control regimens in neonatal intensive care units: Compliance of mothers does matter

  Haiden, N., Pimpel, B., Assadian, O., Binder, C., Kreissl, A., Repa, A., Thanhäuser, M., Roberts, C. D. & Berger, A., Mar 2016, In: Journal of Hospital Infection. 92, 3, p. 226-228 3 p.

  Research output: Contribution to journal › Article › peer-review
  12 Citations (Scopus)

• Comparison of bubble velocity components in a swirling gas-liquid pipe flow using dual-plane EIT and a novel 4-sensor local probe

  Lucas, G. P., Wang, M. & Mishra, R., 5 Sep 2005, 4th World Congress in Industrial Process Tomography. International Society for Industrial Process Tomography, p. 392-397 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• Comparison of Commercial Software Packages for Calculating Surface Texture Parameters

  Li, T., Jiang, X., Blunt, L., Leach, R. & Giusca, C., 2010, Proceedings of the 10th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2010. Spaan, H. (ed.). euspen, Vol. 1. p. 87-90 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  2 Citations (Scopus)

• Comparison of contact measurement and free-space radiation measurement of partial discharge signals

  Jaber, A., Lazaridis, P., Zhang, Y., Upton, D., Ahmed, H., Khan, U., Saeed, B., Mather, P., Vieira, M. F. Q., Atkinson, R., Judd, M. & Glover, I. A., 30 Oct 2015, 2015 21st International Conference on Automation and Computing (ICAC): Automation, Computing and Manufacturing for New Economic Growth. Institute of Electrical and Electronics Engineers Inc., 7313955

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  9 Citations (Scopus)

• Comparison of Current Balancing Configurations for Primary Parallel Isolated Boost Converter

  Sen, G., Dehghan, S. M., Thomsen, O. C., Andersen, M. A. E. & Moller, L., 10 Sep 2011, International Aegean Conference on Electrical Machines and Power Electronics, ACEMP 2011 and Electromotion 2011 Joint Conference. Bülent Ertan, H. (ed.). Institute of Electrical and Electronics Engineers Inc., p. 449-454 6 p. 6490641

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  6 Citations (Scopus)