Find Research outputs

Search results

• Conference contribution

  Optical single-sideband modulation with delay pre-distortion for fiber-radio applications

  Griffin, RA., Lane, PM. & O'Reilly, JJ., 1998, International Topical Meeting on Microwave Photonics. : Technical Digest (including High Speed Photonics Components Workshop) (Cat. No.98EX181). IEEE, p. 93-94 2 p. 6337874

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Optic axis determination by fiber-based polarization-sensitive swept-source optical coherence tomography

  Lu, Z., Kasaragod, D. K. & Matcher, S. J., 11 Feb 2011, Optical Coherence Tomography and Coherence Domain Optical Methods in Biomedicine XV. Fujimoto, J. G., Izatt, J. A. & Tuchin, V. V. (eds.). SPIE, Vol. 7889. 14 p. 78890W. (Progress in Biomedical Optics and Imaging - Proceedings of SPIE; vol. 7889).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• Optimal architecture of CdZnTe detectors for photon counting, multispectral medical x-ray imaging: Comparison between simulation and experiment

  Rossall, A. K., Myronakis, M. E., Cherlin, A., Radley, I., Ayoub, M. & Darambara, D. G., 8 Jul 2013, 2012 IEEE Nuclear Science Symposium and Medical Imaging Conference Record, NSS/MIC 2012. IEEE, p. 4085-4087 3 p. 6551933

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Optimal control of an advanced high speed train's suspension with a flexible body

  Foo, T. H. & Goodall, R. M., 4 May 2015, 1999 European Control Conference (ECC) . Institute of Electrical and Electronics Engineers Inc., p. 551-556 6 p. 7099362

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Optimal Day Ahead Scheduling for Plug-in Electric Vehicles in an Industrial Microgrid Based on V2G System

  Amamra, S. A., Shi, K., Dinh, T. Q. & Marco, J., 16 Dec 2019, 2019 23rd International Conference on Mechatronics Technology, ICMT. Institute of Electrical and Electronics Engineers Inc., 5 p. 8932121

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• Optimal Design of a Linear Antenna Array using Particle Swarm Optimization

  Zaharis, Z., Kampitaki, D., Papastergiou, A., Hatzigaidas, A., Lazaridis, P. & Spasos, M., 2006, Proceedings of the 5th WSEAS international conference on Data networks, communications and computers: DNCOCO'06. Bojkovic, Z. & Petrescu, T. (eds.). World Scientific and Engineering Academy and Society, p. 69-74 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  13 Citations (Scopus)

• Optimal design of a thermoacoustic system comprising of a standing-wave engine driving a travelling-wave cooler

  Saechan, P., Mao, X. & Jaworski, A. J., 1 Jan 2015, 24th IIR International Congress of Refrigeration, ICR 2015. International Institute of Refrigeration, p. 1316-1323 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Optimal design of coaxial travelling wave thermoacoustic cooler

  Saechan, P., Yu, Z. & Jaworski, A. J., 21 Aug 2011, Proceedings of the 23rd IIR International Congress of Refrigeration (ICR 2011): Prague, Czech Republic, 21-26 August. 8 p. 590

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Optimal design of permanent magnet brushless AC machines for electric vehicle applications

  Schofield, N., Giraud-Audine, C., Powell, D. J. & Howe, D., 1 Jan 2003, Proceedings of the Tenth International Symposium on Applied Electromagnetic and Mechanics. Takagi, T. (ed.). 1-4 ed. IOS Press, Vol. 15. p. 143-148 6 p. (International Journal of Applied Electromagnetics and Mechanics; vol. 15, no. 1-4).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  2 Citations (Scopus)

• Optimal design of UHF TV band log-periodic antenna using invasive weed optimization

  Lazaridis, P. I., Zaharis, Z. D., Skeberis, C., Xenos, T. D., Tziris, E. N. & Gallion, P. B., 23 Oct 2014, 2014 4th International Conference on Wireless Communications, Vehicular Technology, Information Theory and Aerospace and Electronic Systems, VITAE 2014 - Co-located with Global Wireless Summit. Institute of Electrical and Electronics Engineers Inc., 6934491

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  13 Citations (Scopus)

• Optimal energy storage sizing based on wind curtailment reduction

  Moradzadeh, M., Van De Vyver, J. & Vandevelde, L., 22 Jan 2014, 3rd International Conference on Renewable Energy Research and Applications, ICRERA 2014. Institute of Electrical and Electronics Engineers Inc., p. 331-335 5 p. 7016405

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  6 Citations (Scopus)

• Optimal Fractal Antenna for In-Vehicle Entertainment Application

  Gravas, I. P., Sifakis, N. F., Zaharis, Z. D., Lazaridis, P. I. & Xenos, T. D., 16 Sep 2020, 2020 Wireless Telecommunications Symposium, WTS 2020. IEEE Computer Society, 5 p. 9198719. (Wireless Telecommunications Symposium; vol. 2020-April).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Optimal linear detectors for nonorthogonal amplify-and-forward protocol

  Ahmed, Q. Z., Park, K. H., Alouini, M. S. & Aissa, S., 7 Nov 2013, 2013 IEEE International Conference on Communications, ICC 2013. Institute of Electrical and Electronics Engineers Inc., p. 4829-4833 5 p. 6655339

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  5 Citations (Scopus)

• Optimal Passive Fault Tolerant Control of a High Redundancy Actuator

  Steffen, T., Michail, K., Dixon, R., Zolotas, A. & Goodall, R., 2009, Proceedings of the 7th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes. Escobet, T. (ed.). 8 ed. Elsevier, Vol. 42. p. 1234-1239 6 p. (IFAC Proceedings Volumes (IFAC-PapersOnline); vol. 42, no. 8).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  1 Citation (Scopus)

• Optimal Selection for Sensor Fault Tolerant Control of an EMS System via Loop-Shaping Robust Control

  Michail, K., Zolotas, A. C., Goodall, R. M. & Halikias, G., 12 Aug 2011, 2011 19th Mediterranean Conference on Control and Automation (MED). IEEE, p. 1112-1117 6 p. 5983065

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  4 Citations (Scopus)

• Optimal Sensor Placement and Measurement of Wind for Water Quality Studies in Urban Reservoirs

  Du, W., Xing, Z., Li, M., He, B., Chua, L. H. C. & Miao, H., 8 Jul 2014, Proceedings of the 13th International Symposium on Information Processing in Sensor Networks (Part of CPS Week): IPSN'14. IEEE, p. 167-178 12 p. 6846750

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  48 Citations (Scopus)

• Optimal Vaneless Diffuser Design For A High-End Centrifugal Compressor

  Ahmed, N., Asim, T. & Mishra, R., Sep 2018, 28th International Congress on Condition Monitoring and Diagnostic Engineering Management. p. 406-413 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Optimisation of a Lead Sulphate Settling Process

  Cregan, V. & Lee, W. T., 28 Nov 2018, Extended Abstracts Summer 2016: Slow-Fast Systems and Hysteresis: Theory and Applications. Korobeinikov, A. (ed.). 1st ed. Birkhauser Verlag Basel, p. 1-6 6 p. (Trends in Mathematics; vol. 10).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Optimisation of flat pad aerostatic bearings with the aid of finite element analysis

  Barrans, S. M. & Bhat, N., 2005, Laser Metrology and Machine Performance VII: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2005. Shore, P. (ed.). euspen, p. 392-401 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  3 Citations (Scopus)

• Optimisation of Grolishing Freeform Surfaces with Rigid and Semi-rigid Tools

  Yu, G., Wu, H. Y., Walker, D., Zheng, X., Li, H., Dunn, C. & Gray, C., 22 Jul 2016, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation II. Navarro, R. & Burge, J. H. (eds.). SPIE, Vol. 9912. 6 p. 99123Q. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 9912).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• Optimised sensor configuration for a Maglev suspension

  Michail, K., Zolotas, A. & Goodall, R. M., 2008, Proceedings of the 17th World Congress, International Federation of Automatic Control. 2 ed. Elsevier, Vol. 41. p. 8305-8310 6 p. (IFAC Proceedings Volumes (IFAC-PapersOnline); vol. 41, no. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  6 Citations (Scopus)

• Optimised Sensor Configurations with Reduced Order Controllers Applied to an EMS System

  Michail, K., Zhou, Y., Zolotas, A., Goodall, R. & Halikias, G., 20 Sep 2010, Proceedings of the 29th Chinese Control Conference. Chen, J. (ed.). IEEE, p. 3595-3600 6 p. 5573264

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• Optimised sensor selection for control and fault tolerance: Comparison and some new results

  Michail, K., Zolotas, A. & Goodall, R., 26 Sep 2013, 21st Mediterranean Conference on Control and Automation. Antsaklis, P., Valavanis, K., Tsourveloudis, N., Zingaretti, P. & Moreno, L. (eds.). IEEE, p. 60-65 6 p. 6608699

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Optimising Comfort in Rural Villages of SW China

  Pitts, A., Gao, Y. & Le, V., 19 Apr 2020, Proceedings of 11th Windsor Conference on Thermal Comfort: Resilient Comfort. Roaf, S., Nicol, F. & Finlayson, W. (eds.). Oxford: Ecohouse Initiative Ltd, p. 693-709 17 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  File

• Optimising Neutron Production from Compact Low Energy Accelerators

  Ratcliffe, N., Barlow, R., Bungau, A., Cywinski, R. & Edgecock, T. R., Jul 2012, IPAC 2012: International Particle Accelerator Conference 2012. Corbett, J. (ed.). Joint Accelerator Conferences Website (JACoW), p. 4154-4156 3 p. THPPR076

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  1 Citation (Scopus)

• Optimization-driven design of a 90° metasurface phase shifter at 60 GHz

  Cano, P. H. Z., Vassos, E., Zaharis, Z. D., Lazaridis, P., Yioultsis, T. V., Kantartzis, N. V. & Feresidis, A., 24 Aug 2022, 2022 IEEE International Black Sea Conference on Communications and Networking, BlackSeaCom 2022. Institute of Electrical and Electronics Engineers Inc., p. 26-29 4 p. 9858206

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Optimization of Log-Periodic Dipole Antenna with LTE Band Rejection

  Mistry, K., Lazaridis, P., Zaharis, Z., Xenos, T. D. & Glover, I., 24 May 2018, Loughborough Antennas & Propagation Conference (LAPC 2017). Institute of Electrical and Electronics Engineers Inc., 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  7 Citations (Scopus)

• Optimization of support stiffness at a railway crossing panel

  Grossoni, I., Bezin, Y. & Neves, S. G. M., 2016, Proceedings of the third international conference on railway technology: Research, development and maintenance. Civil-Comp Press, Vol. 110. (Civil-Comp Proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  2 Citations (Scopus)

• Optimization of surface determination strategies to enhance detection of unfused powder in metal additive manufactured components

  Tawfik, A., Bills, P., Blunt, L. & Racasan, R., 2018, Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing. American Society for Precision Engineering, ASPE, p. 281-285 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  2 Citations (Scopus)

• Optimizations for Query Index Updating in Finite Automaton Based XML Stream Filtering Systems

  Qin, Y., Sun, W., Yu, P. & Zhang, Z., 8 Aug 2008, Proceedings of 2008 IEEE 8th International Conference on Computer and Information Technology: (CIT 2008). Wu, Q., He, X., Nguyen, Q. V., Jia, W. & Huang, M. (eds.). IEEE, p. 509-514 6 p. 4594727

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Optimizing a Deformable Secondary Mirror for Adaptive Optics

  Bigelow, B. C., Bingham, R. G. & Walker, D. D., 31 May 1994, Adaptive Optics in Astronomy. Ealey, M. A. & Merkle, F. (eds.). SPIE, Vol. 2201. p. 800-810 11 p. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 2201).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Optimizing Overlap between Testing and Design in Engineering Product Development Processes

  Tahera, K., Eckert, C. & Earl, C., 2013, Smart Product Engineering: Proceedings of the 23rd CIRP Design Conference, Bochum, Germany, March 11th - 13th, 2013. Abramovici, M. & Stark, R. (eds.). Springer Heidelberg, p. 201-210 10 p. (Lecture Notes in Production Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Optimizing plans through analysis of action dependencies and independencies

  Chrpa, L., McCluskey, T. L. & Osborne, H., 2012, ICAPS 2012 - Proceedings of the 22nd International Conference on Automated Planning and Scheduling. p. 338-342 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  17 Citations (Scopus)

• Optimizing X-Ray Computed Tomography Settings for Dimensional Metrology Using 2D Image Analysis

  Chahid, M., Townsend, A., Liu, A., Bills, P., Sperling, P. & Racasan, R., 1 Sep 2020, Structural Integrity of Additive Manufactured Materials and Parts. Nima, S. & Mohsen, S. (eds.). ASTM International, p. 88-101 14 p. (ASTM Special Technical Publication; vol. STP 1631).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  2 Citations (Scopus)

• Optimum design of planar redundant cable-suspended robots for minimum time trajectory tracking

  Fahham, H. R. & Farid, M., 17 Dec 2010, ICCAS 2010 - International Conference on Control, Automation and Systems. IEEE, p. 2156-2163 8 p. 5670228

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  4 Citations (Scopus)

• Optimum look-up table for reduction of current harmonics in direct torque controlled dual three-phase permanent magnet brushless AC machine drives

  Hoang, K. D., Zhu, Z. Q. & Foster, M., 19 Jul 2012, 6th IET International Conference on Power Electronics, Machines and Drives, PEMD 2012. 592 CP ed. IET Conference Publications, 6 p. 6242032

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• Optimum reactor design for the phenol production

  Khodabakhshi, G. & Sayyar, M. H., 2007, Conference of the Computing and Systems Technology Division 2007, Held at the 2007 AIChE Spring National Meeting. AIChE, p. 15-22 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Order-Preserving Encryption Using Approximate Integer Common Divisors

  Dyer, J., Dyer, M. & Xu, J., 13 Sep 2017, Data Privacy Management, Cryptocurrencies and Blockchain Technology: ESORICS 2017 International Workshops, DPM 2017 and CBT 2017, Oslo, Norway, September 14-15, 2017, Proceedings. Garcia-Alfaro, J., Navarro-Arribas, G., Hartenstein, H. & Herrera-Joancomartí, J. (eds.). Springer Verlag, p. 257-274 18 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 10436 LNCS).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  10 Citations (Scopus)

• Organizing, Managing, Designing: Double meanings, doings and (new?) dilemmas

  Hearn, J., 17 Feb 2017, Dilemmas 2015 Papers from the 18th annual International Conference Dilemmas for Human Services: Organizing, Designing and Managing. Llinnaeus University, 9 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• Orthogonal Distance Fitting of Precision Freeform Surfaces Based on L₁ Norm

  Zhang, X., Jiang, X. & Scott, P. J., 1 Apr 2009, Advanced Mathematical and Computational Tools in Metrology and Testing VIII. Pavese, F., Bär, M., Forbes, A. B., Linares, J. M., Perruchet, C. & Zhang, N. F. (eds.). World Scientific Publishing Co., Vol. 78. p. 385-390 6 p. (Advances in Mathematics for Applied Sciences; vol. 78).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• Oscillating flow in a parallel-plate stack in a standing wave thermoacoustic resonator: PIV measurements within the entrance region

  Mao, X., Yu, Z. & Jaworski, A. J., 9 Apr 2007, Proceedings of the International Congress on Ultrasonics: Vienna, April 9-13. 4 p. 1564

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Oscillatory flow and heat transfer within parallel-plate heat exchangers of thermoacoustic systems

  Saat, F. A. Z. M. & Jaworski, A. J., 25 Nov 2013, Proceedings of the World Congress on Engineering 2013, WCE 2013. Vol. 3 LNECS. p. 1699-1704 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  3 Citations (Scopus)

• Outage analysis of causal cognitive radio channel

  Khan, F. A., Ratnarajah, T., Sellathurai, M. & Prakriya, S., 1 Dec 2009, Proceedings - 2009 1st UK-India International Workshop on Cognitive Wireless Systems, UKIWCWS 2009. 5749415

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• Outage analysis of cognitive Z-interference channel with two-path cognitive relaying

  Khan, F. A., Ratnarajah, T. & Prakriya, S., 3 Mar 2011, Proceedings - 2010 2nd UK-India-IDRC International Workshop on Cognitive Wireless Systems, UKIWCWS 2010. 5724234

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Outage Performance Analysis of Content Delivery in Multiple Devices to Single Device Communications

  Daghal, A. S., Zhu, H., Ahmed, Q. Z. & Pan, Y., 14 Nov 2017, 2017 IEEE 85th Vehicular Technology Conference, VTC Spring 2017 - Proceedings. Institute of Electrical and Electronics Engineers Inc., Vol. 2017-June. 5 p. 8108401

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  2 Citations (Scopus)

• Outage performance of causal cognitive radio Z-interference fading channel with cognitive relaying

  Khan, F. A., Ratnarajah, T. & Prakriya, S., 2 Sep 2010, 2010 International Conference on Signal Processing and Communications, SPCOM 2010. 5560508

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  2 Citations (Scopus)

• Outage performance of cognitive radio wireless network with secondary relaying

  Khan, F. A., Ratnarajah, T. & Ding, Z., 7 Feb 2013, 2012 International Conference on Computer Systems and Industrial Informatics, ICCSII 2012. 6454571

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  2 Citations (Scopus)

• Outage Probability Analysis of Shared UE-Side Distributed Antenna System Based Cooperative AF Relaying Network for 5G Systems

  Singya, P. K., Kumar, N., Bhatia, V. & Khan, F. A., 16 Nov 2017, Proceedings of the 85th Vehicular Technology Conference, VTC Spring 2017 . IEEE, 6 p. 8108244. (IEEE Vehicular Technology Conference; vol. 2017-June).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Outlines and Outliers: A mix-method study of garment silhouette and the ageing body shape

  Zhang, M., Gill, S. & Andrew, S., 1 Nov 2021, 91st Textile Institute World Conference 2018: Integrating Design with Sustainable Technology. Curran Associates, Inc, Vol. 1. p. 605-617 13 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Overcoming Terminological Barriers in Nursing

  Hardiker, N. & Kirby, J., 1996, Medical Informatics Europe ’96: Human Facets in Information Technologies. Brender, J., Christensen, J. P., Scherrer, J. R. & McNair, P. (eds.). IOS Press, Vol. 34. p. 227 - 231 5 p. (Studies in Health Technology and Informatics).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  2 Citations (Scopus)