Find Research outputs

Search results

• Conference contribution

  Design and Implementation of a Data Processing and Visualization System for STEP-NC Programs

  Liu, R., Zhang, X. & Zhang, C., 2009, e-Engineering and Digital Enterprise Technology VII. Cheng, K., Liu, Y., Xu, X. & Xie, H. (eds.). Trans Tech Publications Ltd, Vol. 1. p. 1015-1019 5 p. (Applied Mechanics and Materials; vol. 16-19).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Design and Implementation of a RISC V Processor on FPGA

  Poli, L., Saha, S., Zhai, X. & McDonald-Maier, K. D., 13 Apr 2022, Proceedings - 2021 17th International Conference on Mobility, Sensing and Networking, MSN 2021. Gurrola, J. (ed.). Institute of Electrical and Electronics Engineers Inc., p. 161-166 6 p. 9751566

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Design and Implementation of a Tuned Analog Front-End for Extending VLC Transmission Range

  Basha, M., Sibley, M. J. N., Mather, P. J. & Makama, A., 7 Mar 2019, Proceedings - 2018 International Conference on Computing, Electronics and Communications Engineering, iCCECE 2018. Excell, P. S., Ali, M., Jones, A., Soomro, S. & Miraz, M. H. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 173-177 5 p. 8658815

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  4 Citations (Scopus)

• Design and operational experience of the MICE target

  Booth, C., Hodgson, P., Howlett, L., Mohammad, M. T., Nicholson, R., Smith, P. J. & Schofield, N., 1 Jul 2008, Proceedings of the 11th European Particle Accelerator Conference, EPAC08. Andrian, I., Brüning, O., Petit-Jean-Genaz, C. & Pierini, P. (eds.). European Physical Society Accelerator Group (EPS-AG), p. 2764-2766 3 p. WEPP110

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• Design and Optimization of GaN/AlGaN Quantum Wells and Bragg Confined Structures for Short Wavelength (1.3μm<λ<2μm) Intersubband Absorption

  Radovanović, J., Ikonić, Z., Jovanović, V., Milanović, V., Indjin, D. & Harrison, P., 19 Jul 2004, Proceedings of 24th International Conference on Microelectronics: MIEL 2004. IEEE, Vol. 1. p. 321-324 4 p. 1314629

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Design and Performance Evaluation of a Novel 6/10 Switched Reluctance Machine

  Desai, P. C., Krishnamurthy, M., Schofield, N. & Emadi, A., 16 Jun 2009, 2009 IEEE International Electric Machines and Drives Conference, IEMDC '09. IEEE, p. 755-762 8 p. 5075289

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  9 Citations (Scopus)

• Design and testing of a travelling-wave looped-tube engine for low-cost electricity generators in remote and rural areas

  Yu, Z., Backhaus, S. & Jaworski, A. J., 1 Dec 2009, 7th International Energy Conversion Engineering Conference. 2009-4540

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  5 Citations (Scopus)

• Design and validation of a thermo-mechanical Self-Calibrating displacement sensor for embedded applications

  Furness, T., Fletcher, S. & Longstaff, A., 1 Jun 2022, Proceedings of the Special Interest Group Meeting : Thermal Issues. euspen, 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• Design a two-stage looped-tube thermoacoustic cooler for thermal management of enclosures

  Yahya, S. G., Mao, X. & Jaworski, A. J., 1 Jan 2015, 24th IIR International Congress of Refrigeration, ICR 2015. International Institute of Refrigeration, 8 p. 528

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• Design Computation to Robotic Production Methods for Reciprocal Tessellation of Free-from Timber Structures: Design, production, and assembly of 100 years Bauhaus wood Pavilion

  Mostafavi, S., Kastrati, V., Badr, H. & Mazlan, S., 16 Sep 2020, Proceedings of the 38th eCAADe Conference on Education and Research in Computer Aided Architectural Design in Europe - eCAADe: Anthropologic - Architecture and Fabrication in the cognitive age. Werner, L. C. & Koering, D. (eds.). eCAADe (Education and Research in Computer Aided Architectural Design in Europe) and University of Ljubljana, Faculty of Architecture, Slovenia, Vol. 2. p. 413-421 9 p. (Proceedings of the International Conference on Education and Research in Computer Aided Architectural Design in Europe; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  2 Citations (Scopus)

• Design considerations for GaN/AlN based unipolar (opto-)electronic devices, and interface quality aspects

  Grier, A., Valavanis, A., Edmunds, C., Shao, J., Cooper, J. D., Gardner, G., Mantra, M. J., Malis, O., Indjin, D., Ikonić, Z. & Harrison, P., 25 Aug 2016, 2016 IEEE Photonics Society Summer Topical Meeting Series, SUM 2016. Institute of Electrical and Electronics Engineers Inc., p. 90-91 2 p. 7548743

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Design Implications of High-Speed Digital PPM

  Sibley, M. J., 1 Nov 1993, Multigigabit Fiber Communication Systems. Kazovsky, L. G. & Liu, K. (eds.). SPIE, Vol. 2024. p. 342-352 11 p. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 2024).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• Design in Action: Understanding the Drivers and Barriers to Strategic Use of Design for Innovation

  Hoo Na, J., Evans, M., Zitkus, E. & Walters, A., Aug 2018, 21st DMI: Academic Design Management Conference. p. 127-140 14 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  File

• Designing a first prototype touchscreen interface for older novice users

  Bradley, M. D., Zitkus, E., Kodagoda, N., Murad, S., Westaway, A., Gaggero, C., Fitzsimons, D., Barnard, Y. F. & Lloyd, A. D., 6 Apr 2012, Contemporary Ergonomics and Human Factors 2012: Proceedings of the international conference on Ergonomics & Human Factors 2012, Blackpool, UK, 16-19 April 2012. Anderson, M. (ed.). CRC Press, p. 425-426 2 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• De-Signing Ambiguity

  Dyer, J. & Petersen, C., 1 Jul 2021, Design Culture(s): Cumulus Conference Proceedings Roma 2021. Di Lucchio, L., Imbesi, L., Giambattista, A. & Malakuczi, V. (eds.). Cumulus, Vol. 2. p. 4500-4513 14 p. (Cumulus Roma; vol. 2, no. 7).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Designing as a court of law

  Koskela, L., Arroyo, P. & Ballard, G., 18 Jul 2018, Proc. 26th Annual Conference of the International Group for Lean Construction (IGLC). González, V. A. (ed.). Chennai, India., 10 p. 513

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  2 Citations (Scopus)

• Designing a Serious Game to Raise Awareness of Intimate Partner Violence Among Adolescents in the UK: The Use of ‘Good Games’ Principles for Effective Behavioural Change

  Pearson, J., Wu, S., Royston, H., Smailes, H., Robinson, N., Cowell, A. & Jones, A., 28 Jul 2020, Interactivity, Game Creation, Design, Learning, and Innovation : 8th EAI International Conference, ArtsIT 2019, and 4th EAI International Conference, DLI 2019, Aalborg, Denmark, November 6–8, 2019, Proceedings. Brooks, A. & Brooks, E. I. (eds.). 1st ed. Springer Nature Switzerland AG, p. 458-476 19 p. (Lecture Notes of the Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering, LNICST; vol. 328 LNICST).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  2 Citations (Scopus)

• Designing a Subscription Service for Earthquake Big Data Analysis from Multiple Sources

  Omosebi, O., Sotiriadis, S., Asimakopoulou, E., Bessis, N., Trovati, M. & Hill, R., 4 Nov 2015, 2015 10th International Conference on P2P, Parallel, Grid, Cloud and Internet Computing (3PGCIC). Institute of Electrical and Electronics Engineers Inc., p. 601-604 4 p. 7424635

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  4 Citations (Scopus)

• Designing Spatial UI as a Solution of the Narrow FOV of Microsoft HoloLens: Prototype of Virtual Museum Guide

  Hammady, R. & Ma, M., 21 Apr 2019, Augmented Reality and Virtual Reality: The Power of AR and VR for Business. tom Dieck, M. C. & Jung, T. (eds.). Springer International Publishing, p. 217-231 15 p. (Progress in IS; no. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Design management in a design office: Development of the knowledge base

  Pikas, E., Koskela, L. & Liias, R., 2017, IGLC 2017 - Proceedings of the 25th Annual Conference of the International Group for Lean Construction. The International Group for Lean Construction, p. 539-546 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  1 Citation (Scopus)

• Design management in a design office: Development of the model for 'to-be'

  Pikas, E., Koskela, L. & Seppänen, O., Jul 2017, LC3 2017: Proceedings of the 25th Annual Conference of the International Group for Lean Construction (IGLC). Walsh, K., Sacks, R. & Brilakis, I. (eds.). The International Group for Lean Construction, Vol. 2. p. 555-562 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  1 Citation (Scopus)

• Design Management in a Design Office: Solving the Problem of Relevance

  Pikas, E., Koskela, L. & Seppänen, O., 2017, IGLC 2017 - Proceedings of the 25th Annual Conference of the International Group for Lean Construction. The International Group for Lean Construction, p. 547-554 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• Design of a low-cost thermoacoustic electricity generator and its experimental verification

  Yu, Z., Jaworski, A. J. & Backhaus, S., 1 Dec 2010, ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis, ESDA2010. Vol. 1. p. 191-199 9 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  9 Citations (Scopus)

• Design of a low-cost two-stage thermoacoustic electricity generator for rural communities in developing countries

  Abdoulla, K., Yu, Z. & Jaworski, A. J., 1 Dec 2012, 19th International Congress on Sound and Vibration 2012, ICSV 2012. Vol. 4. p. 2566-2573 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  3 Citations (Scopus)

• Design of a Minimal OSA-CBM Model for an Aircraft Generator

  Sreenuch, T., Tsourdos, A. & Gelman, L., 2010, 7th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2010: CM 2010/MFPT 2010. British Institute of Non-Destructive Testing, Vol. 1. p. 1090-1101 12 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Design of an integrated throughput based control and information system

  Duty, D., 30 Mar 1999, Proceedings of the second International SMESME conference. Child, S. (ed.). Plymouth: Manufacturing and Business Systems Research Group, p. 271-281 11 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Design of a novel, low impact bogie for a freight locomotive

  Marsilla, M., Iwnicki, S., Bruni, S., Berg, M., Cervello, S., Hecht, M., Demadonna, A., Hawksbee, S. & Baumgartel, Y., 16 Apr 2018, Proceedings of 7th Transport Research Arena TRA 2018, April 16-19, 2018, Vienna, Austria. 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  File

• Design of an ultrawideband VHF/UHF antenna for partial discharge detection

  Zhang, Y. & Glover, I., 15 Dec 2014, 2014 IEEE International Conference on Signal Processing, Communications and Computing, ICSPCC 2014. Institute of Electrical and Electronics Engineers Inc., p. 487-490 4 p. 6986241

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  15 Citations (Scopus)

• Design of a Rig to Assess the Structural Performance of Rotors for High Speed Electric Machines

  Mallin, L., 17 Mar 2021, Advances in Manufacturing Engineering and Materials II : Proceedings of the International Conference on Manufacturing Engineering and Materials, ICMEM 2020. Hloch, S., Klichová, D., Pude, F., Krolczyk, G. M. & Chattopadhyaya, S. (eds.). Springer, Cham, Vol. 51. p. 301-323 23 p. (Lecture Notes in Mechanical Engineering; vol. 51).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Design of a STEP-compliant CNC System for Intelligent Manufacturing

  Liu, R. L., Zhang, C. R. & Zhang, X. Z., 2008, e-Engineering and Digital Enterprise Technology. Cheng, K., Yao, Y. & Zhou, L. (eds.). Trans Tech Publications Ltd, p. 717-721 5 p. (Applied Mechanics and Materials; vol. 10-12).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Design of a structural strain measurement system based on slotted photomicrosensors

  Fletcher, S., Chuku, D., Furness, T. & Longstaff, A., 1 Dec 2021, Laser metrology and machine performance XIV: 14th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance : Lamdamap 2021. Blunt, L. & Archenti, A. (eds.). euspen, Vol. 14. p. 54-59 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• Design of a surface-roughness measuring sensor with high accuracy and wide dynamic range

  Lu, X-D., Jiang, J., Xie, T-B. & Li, Z., 22 Sep 1993, Proceedings of SPIE - The International Society for Optical Engineering. SPIE, Vol. 2101. p. 348-351 4 p. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 2101).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Design of a Video Games Art Museum: Concepts, Design Process and Educational Values of a Design Studio Project

  Di Mascio, D., 20 Oct 2021, 2021 Design Communication Conference: Perception to Execution. Uddin, M. S., Welty, C. & Soleimani, A. (eds.). Atlanta, USA: Design Communication Association, p. 305-312 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  File

• Design of flat pad aerostatic bearings with the aid of finite element analysis

  Barrans, S. M. & Bhat, N., 2003, Laser Metrology and Machine Performance VI: Proceedings of the 6th International Conference on Laser Metrology and Machine Performance. Ford, D. (ed.). WIT Press, Vol. 44. p. 361-370 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• Design of high directivity directional couplers in multilayer ceramic technologies

  Al-Taei, S., Lane, P. & Passiopoulos, G., 20 May 2001, 2001 IEEE MTT-S International Microwave Symposium Digest. Institute of Electrical and Electronics Engineers Inc., p. 51-54 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  27 Citations (Scopus)

• Design of Photonic Crystal Klystrons

  Xu, Y. & Seviour, R., Jun 2010, IPAC 2010 : Proceedings of the 1st International Particle Accelerator Conference. Noda, A., Petit-Jean-Genaz, C., Schaa, V., Shirai, T. & Shirakawa, A. (eds.). Joint Accelerator Conferences Website (JACoW), p. 4002-4004 3 p. THPEB057

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  6 Citations (Scopus)

• Design of robust current tracking control for active power filters

  Wu, Z. Y., Schofield, N., Bingham, C. M., Howe, D. & Stone, D. A., 7 Aug 2002, IEMDC 2001 - IEEE International Electric Machines and Drives Conference. IEEE, p. 948-953 6 p. 939436

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  4 Citations (Scopus)

• Design of thermoacoustic rig for the analysis of thermal and hydraulic performance of heat exchangers in oscillatory flow

  Ilori, OM., Mao, X. & Jaworski, AJ., 2013, Lecture Notes in Engineering and Computer Science. Newswood Limited, Vol. III. p. 1669-1674 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  4 Citations (Scopus)

• Design of the running gear for the SUSTRAIL freight vehicle

  Iwnicki, S. D., Orlova, A., Jonsson, P. A. & Fartan, M., 2015, Stephenson Conference Research for Railways 2015. Institution of Mechanical Engineers, p. 299-305 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  1 Citation (Scopus)

• Design of two-stage thermoacoustic stirling engine coupled with push-pull linear alternator for waste heat recovery

  Hamood, A., Mao, X. & Jaworski, AJ., 1 Aug 2015, Proceedings of the 24th IIR International Congress of Refrigeration (ICR): Improving Quality of Life, Preserving the Earth, (Yokohama, Japan: 16-22 August 2015). International Institute of Refrigeration, 8 p. 531

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Design optimisation of the head of a high-precision optical polishing machine

  Barrans, S. M., Ghurbal, E. M. & Freeman, R., 2003, Laser Metrology and Machine Performance VI: Sixth International Conference on Laser Metrology, Machine Tool, CMM and Robot Performance. Ford, D. (ed.). WIT Press, Vol. 44. p. 325-336 12 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Design Optimization of High Frequency Transformer for Dual Active Bridge DC-DC Converter

  Hoang, K. D. & Wang, J., 12 Nov 2012, Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012. IEEE, p. 2311-2317 7 p. 6350205

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  39 Citations (Scopus)

• Design procedure for brushless PM traction machines for electric vehicle applications

  Schofield, N. & Giraud-Audine, C., 5 Dec 2005, 2005 IEEE International Conference on Electric Machines and Drives. IEEE Computer Society, p. 1788-1792 5 p. 1531580

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  13 Citations (Scopus)

• Design science research in lean construction: Process and outcomes

  Da Rocha, C. G., Formoso, C. T., Tzortzopoulos-Fazenda, P., Koskela, L. & Tezel, A., 2012, Proceedings for the 20th Annual Conference of the International Group for Lean Construction: IGLC 2012. The International Group for Lean Construction, 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  24 Citations (Scopus)

• Design Should be Managed as a Physical Process, Too

  Ballard, G. & Koskela, L., 24 Aug 2009, DS 58-2: Proceedings of ICED'09, Volume 2, Design Theory and Research Methodology. Norell Bergendahl, M., Grimheden, M., Leifer, L., Skogstad, P., Lindemann, U. & Reich, Y. (eds.). The Design Society, Vol. 2. p. 251-262 12 p. (ICED; no. 09).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  8 Citations (Scopus)

• Design to fabrication integration and material craftsmanship: A performance driven stone architecture design system based on material, structural and fabrication constraints and criteria

  Mostafavi, S. & Tanti, M., 10 Sep 2014, Proceedings of Education and Research in Computer Aided Architectural Design in Europe - eCAASe 2014: Fusion: Data Integration at its Best. Thompson, E. M. (ed.). eCAADe (Education and Research in Computer Aided Architectural Design in Europe) and University of Ljubljana, Faculty of Architecture, Slovenia, Vol. 1. p. 445-454 10 p. (Proceedings of the International Conference on Education and Research in Computer Aided Architectural Design in Europe; vol. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  3 Citations (Scopus)

• Detailed Models for Dynamic Analysis of Railway Vehicles

  Magalhães, H., Pombo, J., Ambrósio, J. & Pereira, M., Apr 2014, Proceedings of the Second International Conference on Railway Technology: Research, Development and Maintenance. Pombo, J. (ed.). Civil-Comp Press, 271. (Civil-Comp Proceedings; vol. 104).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Detecting Bearing Faults Using an Ensemble Average Autocorrelation Based Stochastic Subspace Identification

  Xu, Y., van Vuuren, P., Tang, X., Gu, F. & Ball, A., Jul 2017, Proceedings of COMADEM 2017. Sherrington, I., Onsy, A., Rao, R., Brooks, H. & Philip, J. (eds.). p. 389-395 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Detecting Railway Under-Track Voids using Multi-Train In-Service Vehicle Accelerometer

  Balouchi, F., Bevan, A. & Formston, R., 27 Sep 2016, 7th IET Conference on Railway Condition Monitoring 2016 (RCM 2016). CP701 ed. Institution of Engineering and Technology, 6 p. 7920668. (IET Conference Publications; vol. 2016, no. CP701).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  11 Citations (Scopus)

• Detection and Diagnosis of Broken Rotor Bar Based on the Analysis of Signals from a Variable Speed Drive

  Ashari, D., Lane, M., Ball, A. & Gu, F., 2014, Proceedings of the 3rd International Workshop and Congress on eMaintenance: eMaintenance2014 - Trends in technologies and methodologies, challenges, possibilities and applications. Kumar, U., Karim, R., Parida, A. & Tretten, P. (eds.). p. 41-46 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access