Find Research outputs

Search results

• Conference contribution

  The Higher Order Spectra for Condition Monitoring/NDT in Non-Stationary Conditions: Part I

  Gelman, L. & Petrunin, I., 1 Oct 2009, 10th International Conference of the Slovenian Society for Non-Destructive Testing 2009: Application of Contemporary Non-Destructive Testing in Engineering . Grum, J. (ed.). The Slovenian Society for Non-Destructive Testing, Vol. 1. p. 17-25 9 p. ( E-Journal of Nondestructive Testing & Ultrasonics: The E-Journal of Nondestructive Testing & Ultrasonics; vol. 14, no. 10).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• The Higher Order Spectrum Analysis for Fault Pattern Extraction of Induction Motors

  Liang, B., 30 Jul 2015, 9th International Conference on Power Electronics and ECCE Asia (ICPE-ECCE Asia), (Seoul, 1-5 June 2015). Institute of Electrical and Electronics Engineers Inc., p. 1579-1584 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• The higher the better? Think twice!

  Sasloglou, K., Glover, I. A., Gazis, V., Kikiras, P. & Andonovic, I., 2014, ISCCSP 2014 - 2014 6th International Symposium on Communications, Control and Signal Processing, Proceedings. IEEE Computer Society, p. 274-277 4 p. 6877867

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• The HISSTools impulse response toolbox: Convolution for the masses

  Tremblay, P. A. & Harker, A., 1 Jul 2012, ICMC 2012: Non-Cochlear Sound - Proceedings of the International Computer Music Conference 2012. Marolt, M., Kaltenbrunner, M. & Ciglar, M. (eds.). International Computer Music Association, p. 148-155 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  File
  31 Citations (Scopus)

• The identification of diesel engine noise sources

  Li, W., Gu, F., Ball, A. D. & Leung, A. Y. T., 1 Dec 2000, Proceedings of the 25th International Conference on Noise and Vibration Engineering, ISMA. p. 1299-1305 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• The Identification of Shaft Current Induced Defects on Rolling Bearings in Wind Turbine Generators

  Li, L., Wang, G., Deng, W., Tang, X., Gu, F. & Ball, A., 26 Oct 2017, Proceedings of the 23rd International Conference on Automation and Computing (University of Huddersfield, 7-8 September 2017). Institute of Electrical and Electronics Engineers Inc., 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  1 Citation (Scopus)

• The Image is a Moment – the art of the visual encounter

  Powell, A. & Hibbert, S., 18 Apr 2018, Transimage 2018: Proceedings of the 5th Biennial Transdisciplinary Imaging Conference 2018. p. 168-183 16 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• The impact of cracks on the performance of photovoltaic modules

  Dhimish, M., Holmes, V., Dales, M., Mather, P., Sibley, M., Chong, B. & Zhang, L., 20 Jul 2017, 2017 IEEE Manchester PowerTech. Institute of Electrical and Electronics Engineers Inc., 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  5 Citations (Scopus)

• The impact of local variations in climate on optimum design techniques and discomfort in dwellings of rural villages of SW China

  Pitts, A. & Gao, Y., 5 Sep 2022, Proceedings of the 3rd International conference on comfort at the extremes: COVID, climate change and ventilation. Roaf, S. & Finlayson, W. (eds.). Oxford, UK: Ecohouse Initiative Ltd, p. 182-191 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• The Impact of Motion Scaling and Haptic Guidance on Operators' Workload and Performance in Teleoperation

  Parsa, S., Maior, H. A., Thumwood, A. R. E., Wilson, M. L., Hanheide, M. & Esfahani, A. G., 28 Apr 2022, CHI EA '22 : Extended Abstracts of the 2022 CHI Conference on Human Factors in Computing Systems. Barbosa, S., Lampe, C., Appert, C. & Shamma, D. A. (eds.). Association for Computing Machinery (ACM), 7 p. 253

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• The Impact of New Running Gear Technologies upon Vehicle-Track Interaction

  Iwnicki, S. & Goodall, R., 6 Aug 2022, Advances in Dynamics of Vehicles on Roads and Tracks II : Proceedings of the 27th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2021. Orlova, A. & Cole, D. (eds.). Springer, Cham, p. 429-439 11 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• The Impact of Providing Information Resources on End-Users’ Satisfaction Case Study: The Library of Arab International University in Syria

  Wade, S. & Restoum, M., 2014, Proceedings of the 10th Northumbria International Conference on Performance Measurement in Libraries and Information Services. Hall, I., Thornton, S. & Town, S. (eds.). York: University of York, p. 259-268 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• The Importance of Building Resilience in Tropical Agro-ecosystems for a Sustainable Future

  Hemachandra, K., De Silva, A., Amaratunga, D., Haigh, R., Dissanayaka, D. M. N. A., Hettiarachchi, D. & Navaratne, C. M., 9 Dec 2021, Proceeding of the International Conference on Geography and Global Sustainability (ICGGS)-2021. Manawadu, L. (ed.). University of Colombo, p. 73-80 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• The influence of assembly on stem taper texture and measurement uncertainty

  Dransfield, K., Racasan, R., Williamson, J., Blunt, L. & Bills, P., 2019, European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 19th International Conference and Exhibition, EUSPEN 2019. Leach, R. K., Billington, D., Nisbet, C. & Phillips, D. (eds.). euspen, p. 530-531 2 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• The influence of loudspeaker-listener distance on the detection of low-bitrate audio coding artefacts

  Pawlak, A. & Lee, H., 28 May 2020, Proceedings of the 148th AES Convention. Audio Engineering Society, 576

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• The influence of secondary flow structures in a turbocharger turbine housing in steady state and pulsating flow conditions

  Lee, S. P., Jupp, M. L. & Nickson, A. K., 23 Aug 2016, Proceedings of 2016 7th International Conference on Mechanical and Aerospace Engineering, ICMAE 2016. Institute of Electrical and Electronics Engineers Inc., p. 154-159 6 p. 7549526

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  10 Citations (Scopus)

• The Influence of Source Spectrum and Loudspeaker Azimuth on Vertical Amplitude Panning

  Mironovs, M. & Lee, H., 11 May 2017, 142nd Audio Engineering Society International Convention 2017. Audio Engineering Society, Vol. 2. p. 830-836 7 p. 9782

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  6 Citations (Scopus)

• The Influence of Space Layout Design on Occupant’s Energy Behaviour

  Delzendeh, E. & Wu, S., 4 Jul 2017, LC3 2017: Proceedings of the Joint Conference on Computing in Construction (JC³). Bosché, F., Brilakis, I. & Sacks, R. (eds.). Vol. 1. p. 601-608 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• The influence of Substrate Temperature and the Anneal Ambient on the Redistribution of Arsenic Implanted into Silicon at Ultra-low Energy

  Whelan, S., Armour, D. G., Van Den Berg, J. A., Zhang, S. & Goldberg, R. D., 2000, 2000 International Conference on Ion Implantation Technology: IIT 2000 - Proceedings. Ryssel, H., Frey, L., Gyulai, J. & Glawischnig, H. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 178-181 4 p. 924119

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• The Influence of the Maintenance State of Track and Bogie Components on the Track-Vehicle Interaction and Loading

  Kuka, N., Verardi, R., Ariaudo, C. & Pombo, J., Apr 2014, Proceedings of the Second International Conference on Railway Technology: Research, Development and Maintenance. Pombo, J. (ed.). Civil-Comp Press, 269. (Civil-Comp Proceedings; vol. 104).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• The Influence of Track Elasticity when travelling on a Railway Turnout

  Lagos Cereceda, R., San Emeterio, A., Vinolas, J., Alonso, A. & Aizpun, M., 2014, Proceedings of the 2nd International Conference on Railway Technology: Research, Development and Maintenance. Pombo, J. (ed.). Corsica: Civil-Comp Press, Vol. 104. 11 p. 208

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• The influence of vehicle tyres pressure on the suspension system response by applying the time-frequency approach

  Hamed, M., Tesfa, B., Aliwan, M., Li, G., Gu, F. & Ball, A. D., 14 Nov 2013, ICAC 2013 - Proceedings of the 19th International Conference on Automation and Computing: Future Energy and Automation. IEEE Computer Society, p. 54-59 6 p. 6662012

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• The influence of wheel/rail contact forces on the material properties of wheels in service

  Molyneux-Berry, P., Davis, C. & Bevan, A., Aug 2012, 9th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, CM 2012. Zhang, W. & Jin, X. (eds.). Southwest Jiaotong University, p. 530-539 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  2 Citations (Scopus)

• The influence of wheelset flexibility on the development of railway wheel polygonalization

  Peng, B., Iwnicki, S., Shackleton, P., Crosbee, D. & Zhao, Y., 27 Sep 2018, Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems. Delft, Netherlands, p. 775-783 9 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  3 Citations (Scopus)

• The Influence of Worn Wheels on Railway Vehicle Dynamics and on their Interaction with the Track

  Pombo, J. & Kuka, N., Sep 2011, Proceedings of the 13th International Conference on Civil, Structural and Environmental Engineering Computing. Topping, B. V. H. & Tsompanakis, Y. (eds.). Civil-Comp Press, 23. (Civil-Comp Proceedings; vol. 96).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• The Influences of Microphone System, Video, and Listening Position on the Perceived Quality of Surround Recording for Sport Content

  Moulson, A. & Lee, H., 8 Oct 2019, Proceedings of the 147th AES Convention. Andreopoulou, A. & Boren, B. (eds.). Audio Engineering Society

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• The instrumentalization of the communicative citizenship field in the context of armed conflict: the case of the Association of Organized Women of Eastern Antioquia in Colombia

  Tamayo Gomez, C., 24 May 2012, Creating Communities: Local, National and Global: Local, National and Global: Proceedings of the fourteenth Conference of the Children’s Identity and Citizenship in Europe Academic Network. Cunningham, P. & Fretwell, N. (eds.). London Metropolitan University, p. 755-767 13 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• The Interface of Problem-based Learning and Technology: The SONIC Experience

  Gibbon, C. & McLoughlin, M., 4 Jul 2005, Proceedings of the IASTED International Conference on Education and Technology, ICET 2005. Montgomerie, T. C. & Parker, J. R. (eds.). ACTA Press, p. 242-246 5 p. 495-809. (Proceedings of the IASTED International Conference on Education and Technology, ICET 2005; vol. 2005).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• The International Competition on Knowledge Engineering for Planning and Scheduling: Food for Thoughts (and Call to Action)

  Vallati, M. & Chrpa, L., 7 May 2020, Proceedings of the Workshop on Knowledge Engineering for Planning and Scheduling (KEPS): ICAPS 2019 Workshop. OpenReview, 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  File

• The International Competitiveness of Universities: How Do We Measure it?

  Anchor, J. & Soliman, S., 13 Sep 2021, Proceedings of the 15th International Conference: Liberec Economic Forum 2021. Antlová, K. & Semerádová, T. (eds.). Liberec: Technical University of Liberec, p. 349-354 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  File

• The Internationalisation of English Business Schools: a Dynamic Capabilities Approach

  Anchor, J. & John, A., 3 Sep 2019, Proceedings from the British Academy of Management Conference 2019: Building and Sustaining High Performance Organisations During Uncertain Times. British Academy of Management, 7 p. 935

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• The interpretation of experimental observation date for the development of mechanisms based creep damage constitutive equations for high chromium steel

  Yang, X., Lu, Z. & Xu, Q., 2015, 21st International Conference on Automation and Computing (ICAC) 2015. Institute of Electrical and Electronics Engineers Inc., 7313992

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  2 Citations (Scopus)

• The Intersubjective Cyborg as Producer of Surreal and Autonomous Graphic Design Doctoral Symposium

  Czolacz, L., 12 Jul 2021, Proceedings of the Ninth xCoAx International conference on Computation, Communication, Aesthetics & X. Carvalhais, M., Verdicchio, M., Ribas, L. & Rangel, A. (eds.). I2ADS, p. 596-604 9 p. (xCoAx Proceedings of the Conference on Computation, Communication, Asethetics & X).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  File

• The Introduction and Design of a New Form of Supermarket: Smart Market

  Zheng, F., Huang, J. & Meagher, M., 28 Jul 2009, 2009 International Symposium on Information Engineering and Electronic Commerce, IEEC 2009. IEEE, p. 608-611 4 p. 5175191

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  5 Citations (Scopus)

• The introduction of a tilted volute design for operation with a mixed flow turbine for turbocharger applications

  Lee, S. P., Jupp, M. L. & Nickson, A. K., 23 Aug 2016, Proceedings of 2016 7th International Conference on Mechanical and Aerospace Engineering, ICMAE 2016. Institute of Electrical and Electronics Engineers Inc., p. 165-170 6 p. 7549528

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  2 Citations (Scopus)

• The Investigation of Material Removal in Bonnet Polishing of CoCr Alloy Artificial Joints

  Blunt, L., Jiang, X. & Zeng, S., 1 Jan 2012, Proceedings of the 12th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2012. euspen, Vol. 2. p. 352-355 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  2 Citations (Scopus)

• The IRiMaS software: Integrating interactive listening and play into musicological research

  Dufeu, F., Takahashi, K., Roebel, A. & Clarke, M., 1 Sep 2019, Proceedings of the 2019 International Computer Music Conference, ICMC-NYCEMF 2019 : International Computer Music Conference New York City Electroacoustic Music Festival. International Computer Music Association, p. 124-129 6 p. (International Computer Music Conference Proceedings ).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  2 Citations (Scopus)

• The Just Intonation Automat – a Musically Adaptive Interface

  Rudi, J., 25 Sep 2015, 41st International Computer Music Conference, ICMC 2015: Looking Back, Looking Forward - Proceedings. Dudas, R. (ed.). International Computer Music Association, Vol. 2015. p. 42-45 4 p. (International Computer Music, Conference Proceedings; vol. 2015).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  1 Citation (Scopus)

• The key performance indicators of the BIM implementation process

  Coates, P., Arayici, Y., Koskela, L., Kagioglou, M., Usher, C. & O'Reilly, K., 2010, Proceedings of the International Conference on Computing in Civil and Building Engineering. Tizani, W. (ed.). Nottingham University Press, 6 p. 79

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• The life cycle process model for efficient construction manager: Conceptual modelling at the level of personality and at micro, meso and macro levels

  Kaklauskas, A., Amaratunga, D. & Lill, I., 1 Dec 2010, COBRA 2010 : Construction, Building and Real Estate Research Conference of the Royal Institution of Chartered Surveyors.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• The lightweight design of a dump truck frame based on dynamic responses

  Chen, Z., Wang, T., Zhao, Z., Shen, J., Zhen, D. & Gu, F., 15 Oct 2012, ICAC 12 - Proceedings of the 18th International Conference on Automation and Computing: Integration of Design and Engineering. IEEE, p. 280-284 5 p. 6330487

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  2 Citations (Scopus)

• The limits of inclusive design in the current design practice

  Zitkus, E., Langdon, P. & Clarkson, P. J., 6 Jun 2013, Green Design, Materials and Manufacturing Processes. CRC Press, p. 539-544 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• The LOw Cost Upper atmosphere Sounder: The "elegant breadboard" programme

  Swinyard, B., Auriacombe, O., Bradshaw, T., Brooks, D. J., Charlton, J., Crook, M., Davies, G., Ellison, B., Emes, M., Friend, J., Gerber, D., Gray, C., Henry, M., Hunt, T., Linfield, E., Navarathinam, N., Parks, S., Rawlings, T., Rea, S., Saunders, C., & 5 othersSavini, G., Tun, S. M., Walker, D., Wang, H. & Winter, B., 26 Apr 2016, 2015 8th UK, Europe, China Millimeter Waves and THz Technology Workshop, UCMMT 2015. Institute of Electrical and Electronics Engineers Inc., 4 p. 7460627

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• The Memetics of Music and its Implications for Psychology

  Jan, S., 2000, Proceedings of the Sixth International Conference on Music Perception and Cognition (ICMPC 6). Woods, C., Luck, G., Brochard, R., Seddon, F. & Sloboda, J. (eds.). Keele, UK: University of Keele Department of Psychology

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• The method of analysis in production management

  Codinhoto, R., Koskela, L., Tzortzopoulos, P. & Kagioglou, M., 18 Jul 2007, Proceedings of the 15th Annual Conference of the International Group for Lean Construction (IGLC15): Lean Construction: A New Paradigm for Managing Capital Projects. Pasquire, C. & Tzortzopoulos, P. (eds.). The International Group for Lean Construction, p. 37-45 9 p. (Proceedings of the Annual Conference of the International Group for Lean Construction; vol. 2012).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  1 Citation (Scopus)

• The need for a condition monitoring database management system

  El-Shtewi, H. F., Li, Y., Gu, F. & Ball, A. D., 30 Sep 2004, Proceedings of the 7th Biennial Conference on Engineering Systems Design and Analysis. Vol. 3. p. 139-148 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• The New Coudé Échelle Spectrograph for the Anglo Australian Telescope

  Walker, D. D. & Diego, F., 1 Jan 1984, International Astronomical Union Colloquium: Very Large Telescopes, their Instrumentation and Programs. Ulrich, M. H. & Kjaer, K. (eds.). Garching: European Southern Observatory, Vol. 79. p. 499-513 15 p. (Proceedings of the International Astronomical Union; vol. 79).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  3 Citations (Scopus)

• The New Higher Order Spectral Techniques for Non-Linearity Monitoring of Structures and Machinery

  Gelman, L., 2013, 12th International Conference of the Slovenian Society for Non-Destructive Testing: Application of Contemporary Non-Destructive Testing in Engineering, ICNDT 2013 - Conference Proceedings. Kek, T. & Grum, J. (eds.). The Slovenian Society for Non-Destructive Testing, p. 525-529 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  1 Citation (Scopus)

• The Next Generation of Legal Expert Systems - New Dawn or False Dawn?

  Stevens, C., Barot, V. & Carter, J., 1 Dec 2011, Research and Development in Intelligent Systems XXVII: Incorporating Applications and Innovations in Intelligent Systems XVIII Proceedings of AI-2010, The Thirtieth SGAI International Conference on Innovative Techniques and Applications of Artificial Intelligence. Bramer, M., Petridis, M. & Hopgood, A. (eds.). Springer Verlag, p. 439-452 14 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  6 Citations (Scopus)

• The Novel Technology for Vibration Diagnosis of Bearings

  Gelman, L., Murray, B., Patel, T. H. & Thomson, A., 2013, 10th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2013: CM 2013/MFPT 2013. British Institute of Non-Destructive Testing, Vol. 1. p. 924-938 15 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review