Find Research outputs

Search results

• Conference contribution

  Design, Development and Thermal Performance Analysis of Ultra-Low Heat Loss Triple Vacuum Glazing

  Memon, S. & Eames, P. C., 29 Oct 2017, ISES Solar World Congress 2017 - IEA SHC International Conference on Solar Heating and Cooling for Buildings and Industry 2017, Proceedings: SWC 2017: ISES Solar World Congress. Renne, D., Griffiths, S., Romero, M., Guthrie, K. & Mugnier, D. (eds.). International Solar Energy Society, p. 886-893 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Design, fabrication and characterization of low speed open-jet wind tunnel

  Azzawi, I. D. J., Mao, X. & Jaworski, A. J., 2016, Proceedings of the World Congress on Engineering. Ao, S. I., Gelman, L., Hukins, D. W. L., Hunter, A. & Korsunsky, A. M. (eds.). Newswood Limited, Vol. II. p. 883-888 6 p. (Lecture Notes in Engineering and Computer Science; vol. 2224).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  5 Citations (Scopus)

• Design Advisor: How to Supply Designers with Knowledge about Inclusion?

  Zitkus, E., Langdon, P. M. & Clarkson, P. J., 10 Mar 2012, Designing Inclusive Systems: Designing Inclusion for Real-world Applications. Langdon, P., Clarkson, J., Robinson, P., Lazar, J. & Heylighen, A. (eds.). Springer London, p. 145-154 Chapter 15

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  4 Citations (Scopus)

• Design and analysis of non-uniform rate digital controllers

  Khan, M. S., Goodall, R. M. & Dixon, R., 2010, UKACC International Conference on CONTROL 2010. Burnham, K. J. & Ersanilli, V. E. (eds.). IET, p. 530-535 6 p. 0338

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Design and development of a medical product using 3D technologies: Scalp cooling cap design case study

  Unver, E., Sorbie, C., Silkstone, R., Kagioglou, M., Paxman, R. & Burke, P., Apr 2017, Challenges for Technology Innovation: An Agenda for the Future: Proceedings of the International Conference on Sustainable Smart Manufacturing (S2M 2016), October 20-22, 2016, Lisbon, Portugal. Bartolo, H., Moreira da Silva, F., Roseta, F., Bártolo, P., Almendra, R., Amorim Almeida, H. & Lemos, A. C. (eds.). CRC Press, p. 51-56 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Design and development of a novel control regime for microgenerating wind turbines

  Kramer, V., Pradham, S., Mishra, R. & Schmidt, K., 9 Dec 2020, 2020 21st International Conference on Research and Education in Mechatronics, REM 2020. Institute of Electrical and Electronics Engineers Inc., 4 p. 9313935

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Design and development of Sur-Face: an interactive mobile app for educating patients regarding corrective surgery of facial deformities

  Pulijala, Y., Ma, M. & Ayoub, A., 2015, Serious Games - 1st Joint International Conference, JCSG 2015, Proceedings. Springer Verlag, Vol. 9090. p. 26-35 10 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 9090).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  2 Citations (Scopus)

• Design and Development of The Optical System for The Nanosatellite Using Rapid Manufacturing

  Koop, R., Braziulis, D., Olabode, O., Pecollari, K., Gunasekaran, B., Juurma, M., Tamre, M. & Hiiemaa, M., 20 Apr 2016, Proceedings of 11th International Conference of DAAAM Baltic Industrial Engineering. Otto, T. (ed.). Halduskultuur Tallinn University of Technology, p. 31-36 6 p. (DAAAM Baltic Conference Industrial Engineering; vol. 2016).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• Design and experimental evaluation of a travelling wave thermoacoustic cooler driven by a standing wave thermoacoustic engine

  Saechan, P., Yu, Z. & Jaworski, AJ., 1 Dec 2012, Proceedings of the 19th International Conference on Sound and Vibration (ICSV) 2012. International Institute of Acoustics and Vibrations, Vol. 2. p. 1621-1628 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  2 Citations (Scopus)

• Design and experimental implementation of an active stability system for a high speed bogie

  Pearson, J. T., Goodall, R. M., Mei, T. X., Shen, S., Kossmann, C., Polach, O. & Himmelstein, G., 10 Feb 2005, The Dynamics of Vehicles on Roads and on Tracks Supplement to Vehicle System Dynamics: Proceedings of the 18th IAVSD Symposium Held in Kanagawa, Japan, August 24-30, 2003. Abe, M. (ed.). SUPPL. ed. CRC Press, Vol. 41. p. 43-52 10 p. (Vehicle System Dynamics; vol. 41, no. Suppl.).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  23 Citations (Scopus)

• Design and Implementation of a Data Processing and Visualization System for STEP-NC Programs

  Liu, R., Zhang, X. & Zhang, C., 2009, e-Engineering and Digital Enterprise Technology VII. Cheng, K., Liu, Y., Xu, X. & Xie, H. (eds.). Trans Tech Publications Ltd, Vol. 1. p. 1015-1019 5 p. (Applied Mechanics and Materials; vol. 16-19).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Design and Implementation of a RISC V Processor on FPGA

  Poli, L., Saha, S., Zhai, X. & McDonald-Maier, K. D., 13 Apr 2022, Proceedings - 2021 17th International Conference on Mobility, Sensing and Networking, MSN 2021. Gurrola, J. (ed.). Institute of Electrical and Electronics Engineers Inc., p. 161-166 6 p. 9751566

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Design and Implementation of a Tuned Analog Front-End for Extending VLC Transmission Range

  Basha, M., Sibley, M. J. N., Mather, P. J. & Makama, A., 7 Mar 2019, Proceedings - 2018 International Conference on Computing, Electronics and Communications Engineering, iCCECE 2018. Excell, P. S., Ali, M., Jones, A., Soomro, S. & Miraz, M. H. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 173-177 5 p. 8658815

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• Design and operational experience of the MICE target

  Booth, C., Hodgson, P., Howlett, L., Mohammad, M. T., Nicholson, R., Smith, P. J. & Schofield, N., 1 Jul 2008, Proceedings of the 11th European Particle Accelerator Conference, EPAC08. Andrian, I., Brüning, O., Petit-Jean-Genaz, C. & Pierini, P. (eds.). European Physical Society Accelerator Group (EPS-AG), p. 2764-2766 3 p. WEPP110

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• Design and Performance Evaluation of a Novel 6/10 Switched Reluctance Machine

  Desai, P. C., Krishnamurthy, M., Schofield, N. & Emadi, A., 16 Jun 2009, 2009 IEEE International Electric Machines and Drives Conference, IEMDC '09. IEEE, p. 755-762 8 p. 5075289

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  8 Citations (Scopus)

• Design and testing of a travelling-wave looped-tube engine for low-cost electricity generators in remote and rural areas

  Yu, Z., Backhaus, S. & Jaworski, A. J., 1 Dec 2009, 7th International Energy Conversion Engineering Conference. 2009-4540

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  5 Citations (Scopus)

• Design and validation of a thermo-mechanical Self-Calibrating displacement sensor for embedded applications

  Furness, T., Fletcher, S. & Longstaff, A., 1 Jun 2022, Proceedings of the Special Interest Group Meeting : Thermal Issues. euspen, 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• Design a two-stage looped-tube thermoacoustic cooler for thermal management of enclosures

  Yahya, S. G., Mao, X. & Jaworski, A. J., 1 Jan 2015, 24th IIR International Congress of Refrigeration, ICR 2015. International Institute of Refrigeration, 8 p. 528

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• Design Computation to Robotic Production Methods for Reciprocal Tessellation of Free-from Timber Structures: Design, production, and assembly of 100 years Bauhaus wood Pavilion

  Mostafavi, S., Kastrati, V., Badr, H. & Mazlan, S., 16 Sep 2020, Proceedings of the 38th eCAADe Conference on Education and Research in Computer Aided Architectural Design in Europe - eCAADe: Anthropologic - Architecture and Fabrication in the cognitive age. Werner, L. C. & Koering, D. (eds.). eCAADe (Education and Research in Computer Aided Architectural Design in Europe) and University of Ljubljana, Faculty of Architecture, Slovenia, Vol. 2. p. 413-421 9 p. (Proceedings of the International Conference on Education and Research in Computer Aided Architectural Design in Europe; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• Design Implications of High-Speed Digital PPM

  Sibley, M. J., 1 Nov 1993, Multigigabit Fiber Communication Systems. Kazovsky, L. G. & Liu, K. (eds.). SPIE, Vol. 2024. p. 342-352 11 p. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 2024).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• Design in Action: Understanding the Drivers and Barriers to Strategic Use of Design for Innovation

  Hoo Na, J., Evans, M., Zitkus, E. & Walters, A., Aug 2018, 21st DMI: Academic Design Management Conference. p. 127-140 14 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  File

• Designing a first prototype touchscreen interface for older novice users

  Bradley, M. D., Zitkus, E., Kodagoda, N., Murad, S., Westaway, A., Gaggero, C., Fitzsimons, D., Barnard, Y. F. & Lloyd, A. D., 6 Apr 2012, Contemporary Ergonomics and Human Factors 2012: Proceedings of the international conference on Ergonomics & Human Factors 2012, Blackpool, UK, 16-19 April 2012. Anderson, M. (ed.). CRC Press, p. 425-426 2 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Designing as a court of law

  Koskela, L., Arroyo, P. & Ballard, G., 18 Jul 2018, Proc. 26th Annual Conference of the International Group for Lean Construction (IGLC). González, V. A. (ed.). Chennai, India., 10 p. 513

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  2 Citations (Scopus)

• Designing a Serious Game to Raise Awareness of Intimate Partner Violence Among Adolescents in the UK: The Use of ‘Good Games’ Principles for Effective Behavioural Change

  Pearson, J., Wu, S., Royston, H., Smailes, H., Robinson, N., Cowell, A. & Jones, A., 28 Jul 2020, Interactivity, Game Creation, Design, Learning, and Innovation : 8th EAI International Conference, ArtsIT 2019, and 4th EAI International Conference, DLI 2019, Aalborg, Denmark, November 6–8, 2019, Proceedings. Brooks, A. & Brooks, E. I. (eds.). 1st ed. Springer Nature Switzerland AG, p. 458-476 19 p. (Lecture Notes of the Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering, LNICST; vol. 328 LNICST).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  2 Citations (Scopus)

• Designing a Subscription Service for Earthquake Big Data Analysis from Multiple Sources

  Omosebi, O., Sotiriadis, S., Asimakopoulou, E., Bessis, N., Trovati, M. & Hill, R., 4 Nov 2015, 2015 10th International Conference on P2P, Parallel, Grid, Cloud and Internet Computing (3PGCIC). Institute of Electrical and Electronics Engineers Inc., p. 601-604 4 p. 7424635

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• Designing Spatial UI as a Solution of the Narrow FOV of Microsoft HoloLens: Prototype of Virtual Museum Guide

  Hammady, R. & Ma, M., 21 Apr 2019, Augmented Reality and Virtual Reality: The Power of AR and VR for Business. tom Dieck, M. C. & Jung, T. (eds.). Springer International Publishing, p. 217-231 15 p. (Progress in IS; no. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Design management in a design office: Development of the knowledge base

  Pikas, E., Koskela, L. & Liias, R., 2017, IGLC 2017 - Proceedings of the 25th Annual Conference of the International Group for Lean Construction. The International Group for Lean Construction, p. 539-546 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  1 Citation (Scopus)

• Design management in a design office: Development of the model for 'to-be'

  Pikas, E., Koskela, L. & Seppänen, O., Jul 2017, LC3 2017: Proceedings of the 25th Annual Conference of the International Group for Lean Construction (IGLC). Walsh, K., Sacks, R. & Brilakis, I. (eds.). The International Group for Lean Construction, Vol. 2. p. 555-562 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  1 Citation (Scopus)

• Design Management in a Design Office: Solving the Problem of Relevance

  Pikas, E., Koskela, L. & Seppänen, O., 2017, IGLC 2017 - Proceedings of the 25th Annual Conference of the International Group for Lean Construction. The International Group for Lean Construction, p. 547-554 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• Design of a low-cost thermoacoustic electricity generator and its experimental verification

  Yu, Z., Jaworski, A. J. & Backhaus, S., 1 Dec 2010, ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis, ESDA2010. Vol. 1. p. 191-199 9 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  7 Citations (Scopus)

• Design of a low-cost two-stage thermoacoustic electricity generator for rural communities in developing countries

  Abdoulla, K., Yu, Z. & Jaworski, A. J., 1 Dec 2012, 19th International Congress on Sound and Vibration 2012, ICSV 2012. Vol. 4. p. 2566-2573 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  3 Citations (Scopus)

• Design of a Minimal OSA-CBM Model for an Aircraft Generator

  Sreenuch, T., Tsourdos, A. & Gelman, L., 2010, 7th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2010: CM 2010/MFPT 2010. British Institute of Non-Destructive Testing, Vol. 1. p. 1090-1101 12 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Design of an integrated throughput based control and information system

  Duty, D., 30 Mar 1999, Proceedings of the second International SMESME conference. Child, S. (ed.). Plymouth: Manufacturing and Business Systems Research Group, p. 271-281 11 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Design of a novel, low impact bogie for a freight locomotive

  Marsilla, M., Iwnicki, S., Bruni, S., Berg, M., Cervello, S., Hecht, M., Demadonna, A., Hawksbee, S. & Baumgartel, Y., 16 Apr 2018, Proceedings of 7th Transport Research Arena TRA 2018, April 16-19, 2018, Vienna, Austria. 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  File

• Design of an ultrawideband VHF/UHF antenna for partial discharge detection

  Zhang, Y. & Glover, I., 15 Dec 2014, 2014 IEEE International Conference on Signal Processing, Communications and Computing, ICSPCC 2014. Institute of Electrical and Electronics Engineers Inc., p. 487-490 4 p. 6986241

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  11 Citations (Scopus)

• Design of a STEP-compliant CNC System for Intelligent Manufacturing

  Liu, R. L., Zhang, C. R. & Zhang, X. Z., 2008, e-Engineering and Digital Enterprise Technology. Cheng, K., Yao, Y. & Zhou, L. (eds.). Trans Tech Publications Ltd, p. 717-721 5 p. (Applied Mechanics and Materials; vol. 10-12).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Design of a structural strain measurement system based on slotted photomicrosensors

  Fletcher, S., Chuku, D., Furness, T. & Longstaff, A., 1 Dec 2021, Laser metrology and machine performance XIV: 14th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance : Lamdamap 2021. Blunt, L. & Archenti, A. (eds.). euspen, Vol. 14. p. 54-59 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• Design of a surface-roughness measuring sensor with high accuracy and wide dynamic range

  Lu, X-D., Jiang, J., Xie, T-B. & Li, Z., 22 Sep 1993, Proceedings of SPIE - The International Society for Optical Engineering. SPIE, Vol. 2101. p. 348-351 4 p. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 2101).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Design of a Video Games Art Museum: Concepts, Design Process and Educational Values of a Design Studio Project

  Di Mascio, D., 20 Oct 2021, 2021 Design Communication Conference: Perception to Execution. Uddin, M. S., Welty, C. & Soleimani, A. (eds.). Atlanta, USA: Design Communication Association, p. 305-312 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  File

• Design of flat pad aerostatic bearings with the aid of finite element analysis

  Barrans, S. M. & Bhat, N., 2003, Laser Metrology and Machine Performance VI: Proceedings of the 6th International Conference on Laser Metrology and Machine Performance. Ford, D. (ed.). WIT Press, Vol. 44. p. 361-370 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• Design of high directivity directional couplers in multilayer ceramic technologies

  Al-Taei, S., Lane, P. & Passiopoulos, G., 20 May 2001, 2001 IEEE MTT-S International Microwave Symposium Digest. Institute of Electrical and Electronics Engineers Inc., p. 51-54 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  27 Citations (Scopus)

• Design of Photonic Crystal Klystrons

  Xu, Y. & Seviour, R., Jun 2010, IPAC 2010 : Proceedings of the 1st International Particle Accelerator Conference. Noda, A., Petit-Jean-Genaz, C., Schaa, V., Shirai, T. & Shirakawa, A. (eds.). Joint Accelerator Conferences Website (JACoW), p. 4002-4004 3 p. THPEB057

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  5 Citations (Scopus)

• Design of robust current tracking control for active power filters

  Wu, Z. Y., Schofield, N., Bingham, C. M., Howe, D. & Stone, D. A., 7 Aug 2002, IEMDC 2001 - IEEE International Electric Machines and Drives Conference. IEEE, p. 948-953 6 p. 939436

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  4 Citations (Scopus)

• Design of thermoacoustic rig for the analysis of thermal and hydraulic performance of heat exchangers in oscillatory flow

  Ilori, OM., Mao, X. & Jaworski, AJ., 2013, Lecture Notes in Engineering and Computer Science. Newswood Limited, Vol. III. p. 1669-1674 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  4 Citations (Scopus)

• Design of the running gear for the SUSTRAIL freight vehicle

  Iwnicki, S. D., Orlova, A., Jonsson, P. A. & Fartan, M., 2015, Stephenson Conference Research for Railways 2015. Institution of Mechanical Engineers, p. 299-305 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Design of two-stage thermoacoustic stirling engine coupled with push-pull linear alternator for waste heat recovery

  Hamood, A., Mao, X. & Jaworski, AJ., 1 Aug 2015, Proceedings of the 24th IIR International Congress of Refrigeration (ICR): Improving Quality of Life, Preserving the Earth, (Yokohama, Japan: 16-22 August 2015). International Institute of Refrigeration, 8 p. 531

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Design optimisation of the head of a high-precision optical polishing machine

  Barrans, S. M., Ghurbal, E. M. & Freeman, R., 2003, Laser Metrology and Machine Performance VI: Sixth International Conference on Laser Metrology, Machine Tool, CMM and Robot Performance. Ford, D. (ed.). WIT Press, Vol. 44. p. 325-336 12 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Design Optimization of High Frequency Transformer for Dual Active Bridge DC-DC Converter

  Hoang, K. D. & Wang, J., 12 Nov 2012, Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012. IEEE, p. 2311-2317 7 p. 6350205

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  31 Citations (Scopus)

• Design procedure for brushless PM traction machines for electric vehicle applications

  Schofield, N. & Giraud-Audine, C., 5 Dec 2005, 2005 IEEE International Conference on Electric Machines and Drives. IEEE Computer Society, p. 1788-1792 5 p. 1531580

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  13 Citations (Scopus)

• Design science research in lean construction: Process and outcomes

  Da Rocha, C. G., Formoso, C. T., Tzortzopoulos-Fazenda, P., Koskela, L. & Tezel, A., 2012, Proceedings for the 20th Annual Conference of the International Group for Lean Construction: IGLC 2012. The International Group for Lean Construction, 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  24 Citations (Scopus)