Find Research Outputs

Search concepts
Selected filters

Publication Year

  • 2020
  • 2019
  • 2018
  • 2017
  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011

Author

  • Andrew Ball

Achieving high bit rate logical stochastic resonance in a bistable system by adjusting parameters

Yang, D., Gu, F., Feng, G., Yang, Y. & Ball, A., 10 Oct 2015, In : Chinese Physics B. 24, 11, 110502.

Research output: Contribution to journalArticle

3 Citations (Scopus)

A clamping force measurement system for monitoring the condition of bolted joints on railway track joints and points

Tesfa, B., Horler, G., Al Thobiani, F., Gu, F. & Ball, A. D., 2012, In : Journal of Physics: Conference Series. 364, 1, 012021.

Research output: Contribution to journalArticle

1 Citation (Scopus)

A comparative study of gravitational acceleration cancellation from on-rotor MEMS accelerometers for condition monitoring

Mones, Z., Feng, G., Tang, X., Haba, U., Gu, F. & Ball, A., 2017, Proceedings of the 24th International Congress on Sound and Vibration, ICSV 2017. Gibbs, B. (ed.). International Institute of Acoustics and Vibration, IIAV

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
1 Citation (Scopus)
11 Citations (Scopus)
4 Citations (Scopus)

A comparison of different techniques for induction motor rotor fault diagnosis

Alwodai, A., Gu, F. & Ball, A. D., 2012, In : Journal of Physics: Conference Series. 364, 1, 012066.

Research output: Contribution to journalConference article

24 Citations (Scopus)

Acoustic feature extraction for monitoring the combustion process of diesel engine based on EMD and wavelet analysis

Fang, S., Li, S. C., Zhen, D., Shi, Z., Gu, F. & Ball, A. D., 1 Jul 2017, In : International Journal of COMADEM. 20, 3, p. 25-30 6 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Acoustic measurements for the combustion diagnosis of diesel engines fuelled with biodiesels

Zhen, D., Wang, T., Gu, F., Tesfa, B. & Ball, A., May 2013, In : Measurement Science and Technology. 24, 5, 055005.

Research output: Contribution to journalArticle

9 Citations (Scopus)

Adaptive noise cancelling and time-frequency techniques for rail surface defect detection

Liang, B., Iwnicki, S., Ball, A. & Young, A. E., 1 Mar 2015, In : Mechanical Systems and Signal Processing. 54, p. 41-51 11 p.

Research output: Contribution to journalArticle

31 Citations (Scopus)

A Dynamic Deformation based Lubrication Model between the Piston Rings and Cylinder Liner

Li, G., Gu, F., Wang, T., Lu, X., Zhang, R. & Ball, A., 26 Oct 2017, Proceedings of the 23rd International Conference on Automation & Computing (University of Huddersfield, 7-8 September 2017). Institute of Electrical and Electronics Engineers Inc., 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

A general regression neural network model for gearbox fault detection using motor operating parameters

Baqqar, M., Wang, T., Ahmed, M., Gu, F., Lu, J. & Ball, A., 22 Oct 2012, Proceedings of the 2012 UKACC International Conference on Control, CONTROL 2012. IEEE, p. 584-588 5 p. 6334695

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

A homography transformation based video stabilization method for structural health monitoring using a unmanned aerial vehicle

Li, M., Gu, F., Ball, A. & Song, L., 1 Aug 2019, Sixteenth International Conference on Condition Monitoring and Asset Management (CM 2019) . British Institute of Non-Destructive Testing, Vol. 1. 130

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Airborne Acoustic Signature Analysis for Fault Diagnosis of Reciprocating Compressors Using Modulation Signal Bi-spectrum

Mondal, D., Haba, U., Gu, F. & Ball, A., 11 Nov 2019, 2019 25th IEEE International Conference on Automation and Computing, ICAC 2019: Improving Productivity through Automation and Computing. Yu, H. (ed.). Institute of Electrical and Electronics Engineers Inc., 5 p. 8895097

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A modern diagnostic approach for automobile systems condition monitoring

Selig, M., Shi, Z., Ball, A. & Schmidt, K., 23 May 2012, In : Journal of Physics: Conference Series. 364, 1, 012013.

Research output: Contribution to journalConference article

1 Citation (Scopus)

An accurate instantaneous angular speed estimation method based on a dual detector setup

Zeng, Q., Feng, G., Shao, Y., Devitt, J., Gu, F. & Ball, A., 6 Feb 2020, In : Mechanical Systems and Signal Processing. 140, 16 p., 106674.

Research output: Contribution to journalArticle

Analysis of frictional effects on the dynamic response of gear systems and the implications for diagnostics

Brethee, K. F., Gao, J., Gu, F. & Ball, A. D., 30 Oct 2015, 2015 21st International Conference on Automation and Computing: Automation, Computing and Manufacturing for New Economic Growth, ICAC 2015. Institute of Electrical and Electronics Engineers Inc., 7313957

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

An application to transient current signal based induction motor fault diagnosis of Fourier-Bessel expansion and simplified fuzzy ARTMAP

Tran, V. T., AlThobiani, F., Ball, A. & Choi, B. K., 1 Oct 2013, In : Expert Systems with Applications. 40, 13, p. 5372-5384 13 p.

Research output: Contribution to journalArticle

32 Citations (Scopus)

An approach to fault diagnosis of reciprocating compressor valves using Teager-Kaiser energy operator and deep belief networks

Tran, V. T., Al Thobiani, F. & Ball, A., Jul 2014, In : Expert Systems with Applications. 41, 9, p. 4113-4122 10 p.

Research output: Contribution to journalArticle

221 Citations (Scopus)

An Approach to Reducing Input Parameter Volume for Fault Classifiers

Smith, A., Gu, F. & Ball, A., Apr 2019, In : International Journal of Automation and Computing. 16, 2, p. 199-212 14 p.

Research output: Contribution to journalArticle

Open Access
2 Citations (Scopus)

An Empirical Study of Link Quality Assessment in Wireless Sensor Networks applicable to Transmission Power Control Protocols

Hughes, J., Lazaridis, P., Glover, I. & Ball, A., 24 May 2018, Loughborough Antennas & Propagation Conference (LAPC 2017). IET, 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

An evaluation of gearbox condition monitoring using infrared thermal images applied with convolutional neural networks

Li, Y., Xi Gu, J., Zhen, D., Xu, M. & Ball, A., May 2019, In : Sensors (Switzerland). 19, 9, 16 p., 2205.

Research output: Contribution to journalArticle

Open Access
3 Citations (Scopus)

A New Method for Modelling and Simulation of the Dynamic Behaviour of the Wheel Rail Contact

Anyakwo, A., Pislaru, C. & Ball, A., 1 Jun 2012, In : International Journal of Automation and Computing. 9, 3, p. 237-247 11 p.

Research output: Contribution to journalArticle

14 Citations (Scopus)

A new method of accurate broken rotor bar diagnosis based on modulation signal bispectrum analysis of motor current signals

Gu, F., Wang, T., Alwodai, A., Tian, X., Shao, Y. & Ball, A. D., 2015, In : Mechanical Systems and Signal Processing. 50-51, p. 400-413 14 p.

Research output: Contribution to journalArticle

56 Citations (Scopus)

A new method of vibration analysis for the diganosis of impeller in a centrifugal pump

Hamomd, O., Tian, X., Chen, Z., Albraik, A., Gu, F. & Ball, A., 2014, 21st International Congress on Sound and Vibration 2014, ICSV 2014. International Institute of Acoustics and Vibrations, Vol. 4. p. 2750-2758 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
1 Citation (Scopus)

An Improved Lubrication Model between Piston Rings and Cylinder Liners with Consideration of Liner Dynamic Deformations

Li, G., Gu, F., Wang, T., Lu, X., Zhang, L., Zhang, C. & Ball, A., 13 Dec 2017, In : Energies. 10, 12, 22 p., 2122.

Research output: Contribution to journalArticle

Open Access
8 Citations (Scopus)

An Introduction of a Robust OMA Method: CoS-SSI and Its Performance Evaluation through the Simulation and a Case Study

Liu, F., Wu, J., Gu, F. & Ball, A. D., 31 Jan 2019, In : Shock and Vibration. 2019, p. 1-14 14 p., 6581516.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

An Investigation into the Acoustic Emissions of Internal Combustion Engines with Modelling and Wavelet Package Analysis for Monitoring Lubrication Conditions

Wei, N., Gu, J. X., Gu, F., Chen, Z., Li, G. & Ball, A., 16 Feb 2019, In : Energies. 12, 4, 19 p., 640.

Research output: Contribution to journalArticle

Open Access
2 Citations (Scopus)

An investigation into vibration response for condition monitoring of reciprocating compressor based on modulation signal spectrum analysis

Haba, U., Brethee, K., Hassin, O., Gu, F. & Ball, A. D., Jul 2018, In : International Journal of COMADEM. 21, 3, p. 31-37 7 p.

Research output: Contribution to journalConference article

1 Citation (Scopus)

An investigation of acoustic emission responses of a self aligning spherical journal bearing

Raharjo, P., Abdusslam, S. A., Wang, T., Gu, F. & Ball, A. D., Aug 2011, 8th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2011, CM 2011/MFPT 2011. British Institute of Non-Destructive Testing, Vol. 1. p. 424-439 16 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

An investigation of electrical motor parameters in a sensorless variable speed drive for machine fault diagnosis

Hamad, N., Brethee, K. F., Gu, F. & Ball, A. D., 24 Oct 2016, 22nd International Conference on Automation and Computing: Tackling the New Challenges in Automation and Computing. Institute of Electrical and Electronics Engineers Inc., p. 329-335 7 p. 7604941

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
4 Citations (Scopus)
6 Citations (Scopus)
Open Access
13 Citations (Scopus)

An investigation on energy recovery analysis of active suspension system

Wang, R., Tran, V. T., Gu, F. & Ball, A. D., 2013, ICAC 2013 - Proceedings of the 19th International Conference on Automation and Computing: Future Energy and Automation. IEEE Computer Society, p. 287-292 6 p. 6662053

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

A novel approach to modelling and simulation of the dynamic behaviour of the wheel-rail interface

Anyakwo, A., Pislaru, C., Ball, A. & Gu, F., 2011, Proceedings of 2011 17th International Conference on Automation and Computing, ICAC 2011. p. 283-288 6 p. 6084942

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

A novel method to improve the resolution of envelope spectrum for bearing fault diagnosis based on a wireless sensor node

Feng, G., Zhen, D., Tian, X., Gu, F. & Ball, A. D., 2015, Vibration Engineering and Technology of Machinery - Proceedings of VETOMAC X, 2014. Kluwer Academic Publishers, Vol. 23. p. 765-775 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

A Novel Wavelet Thresholding Method for Vibration Data Denoising and Diagnostic Feature Enhancement in Condition Monitoring

Rabeyee, K., Xu, Y., Gu, F. & Ball, A. D., 11 Nov 2019, 2019 25th IEEE International Conference on Automation and Computing, ICAC 2019: Improving Productivity through Automation and Computing. Yu, H. (ed.). Institute of Electrical and Electronics Engineers Inc., 6 p. 8894986

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A Performance Evaluation of Two Bispectrum Analysis Methods Applied to Electrical Current Signals for Monitoring Induction Motor-Driven Systems

Huang, B., Feng, G., Tang, X., Gu, J. X., Xu, G., Cattley, R., Gu, F. & Ball, A., 15 Apr 2019, In : Energies. 12, 8, 23 p., 1438.

Research output: Contribution to journalArticle

Open Access
5 Citations (Scopus)

Application of EKF for an electro-hydraulic servo system using model-based approach

Zheng, L., Wu, L. L., Gu, X., Shi, Z. & Ball, A., 2013, Applied Scientific Research and Engineering Developments for Industry. Vol. 385-386. p. 609-613 5 p. (Applied Mechanics and Materials; vol. 385-386).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Application of minimum entropy deconvolution in diagnosis of reciprocating compressor faults based on airborne acoustic analysis

Mondal, D., Gu, F. & Ball, A., 1 Aug 2019, Sixteenth International Conference on Condition Monitoring and Asset Management (CM 2019) . British Institute of Non-Destructive Testing, Vol. 1. 139

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Application of wavelet packet transform and envelope analysis to non-stationary vibration signals for fault diagnosis of a reciprocating compressor

Ogbulafor, U. E., Feng, G., Mones, Z., Gu, F. & Ball, A. D., 2017, 1st World Congress on Condition Monitoring: (WCCM 2017). British Institute of Non-Destructive Testing

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

A process monitoring method for self-piercing riveting

He, X., Gu, F. & Ball, A., 1 Jul 2012, In : Advanced Science Letters. 14, 1, p. 394-397 4 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

A review of numerical analysis of friction stir welding

He, X., Gu, F. & Ball, A., 2014, In : Progress in Materials Science. 65, p. 1-66 66 p.

Research output: Contribution to journalArticle

248 Citations (Scopus)

A review on energy harvesting supplying wireless sensor nodes for machine condition monitoring

Tang, X., Mones, Z., Wang, X., Gu, F. & Ball, A. D., 1 Jul 2019, 2018 24th IEEE International Conference on Automation and Computing ICAC 2018. Ma, X. (ed.). Institute of Electrical and Electronics Engineers Inc., 8748946

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
32 Citations (Scopus)

A Sparse Modulation Signal Bispectrum Analysis Method for Rolling Element Bearing Diagnosis

Wang, G., Gu, F., Rehab, I., Ball, A. & Li, L., 19 Dec 2018, In : Mathematical Problems in Engineering. 2018, 12 p., 2954094.

Research output: Contribution to journalArticle

Open Access
2 Citations (Scopus)

A study of diagnostic signatures of a deep groove ball bearing based on a nonlinear dynamic model

Rehab, I., Tian, X., Gu, F. & Ball, A. D., 2015, 2015 21st International Conference on Automation and Computing: Automation, Computing and Manufacturing for New Economic Growth, ICAC 2015. New York: Institute of Electrical and Electronics Engineers Inc., 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
2 Citations (Scopus)

A Study Of The Diagnostic Amplitude Of Rolling Bearing Under Increasing Radial Clearance Using Modulation Signal Bispectrum

Rehab, I. A. M., Tian, X., Zhang, R., Ball, A. & Gu, F., 1 Jan 2017, In : International Journal of COMADEM. 20, 3

Research output: Contribution to journalArticle

Open Access

A study of the suspension system for the diagnosis of dynamic characteristics

Hamed, M., Tesfa, B., Gu, F. & Ball, A. D., 24 Oct 2014, ICAC 2014 - Proceedings of the 20th International Conference on Automation and Computing: Future Automation, Computing and Manufacturing. Institute of Electrical and Electronics Engineers Inc., p. 152-157 6 p. 6935478

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)