Find Research Outputs

Search concepts
Selected filters
2020

An accurate instantaneous angular speed estimation method based on a dual detector setup

Zeng, Q., Feng, G., Shao, Y., Devitt, J., Gu, F. & Ball, A., 6 Feb 2020, In : Mechanical Systems and Signal Processing. 140, 16 p., 106674.

Research output: Contribution to journalArticle

Detectors
Rotors
Masks
Monitoring
Computer simulation
Bearings (structural)
Bispectrum
Non-Gaussian Noise
Noise Suppression
fault detection

Model Based IAS Analysis for Fault Detection and Diagnosis of IC Engine Powertrains

Xu, Y., Huang, B., Yun, Y., Cattley, R., Gu, F. & Ball, A. D., 24 Jan 2020, In : Energies. 13, 3, 21 p., 565.

Research output: Contribution to journalArticle

Open Access
Angular speed
Fault Detection and Diagnosis
Internal Combustion Engine
Powertrains
Internal combustion engines
1 Citation (Scopus)

Response analysis of an accelerating unbalanced rotating system with both random and interval variables

Fu, C., Xu, Y., Yang, Y., Lu, K., Gu, F. & Ball, A., 3 Feb 2020, In : Journal of Sound and Vibration. 466, 15 p., 115047.

Research output: Contribution to journalArticle

random variables
intervals
rotors
Rotors
distribution moments
2019

A homography transformation based video stabilization method for structural health monitoring using a unmanned aerial vehicle

Li, M., Gu, F., Ball, A. & Song, L., 1 Aug 2019, Sixteenth International Conference on Condition Monitoring and Asset Management (CM 2019) . British Institute of Non-Destructive Testing, Vol. 1. 130

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Structural health monitoring
Unmanned aerial vehicles (UAV)
Stabilization
Cameras
Monitoring

Airborne Acoustic Signature Analysis for Fault Diagnosis of Reciprocating Compressors Using Modulation Signal Bi-spectrum

Mondal, D., Haba, U., Gu, F. & Ball, A., 11 Nov 2019, 2019 25th IEEE International Conference on Automation and Computing, ICAC 2019: Improving Productivity through Automation and Computing. Yu, H. (ed.). Institute of Electrical and Electronics Engineers Inc., 5 p. 8895097

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bispectrum
Reciprocating compressors
Compressor
Fault Diagnosis
Failure analysis
2 Citations (Scopus)

An Approach to Reducing Input Parameter Volume for Fault Classifiers

Smith, A., Gu, F. & Ball, A., Apr 2019, In : International Journal of Automation and Computing. 16, 2, p. 199-212 14 p.

Research output: Contribution to journalArticle

Open Access
Fault
Classifiers
Classifier
Bayes Classifier
Harmonic

An Introduction of a Robust OMA Method: CoS-SSI and Its Performance Evaluation through the Simulation and a Case Study

Liu, F., Wu, J., Gu, F. & Ball, A. D., 31 Jan 2019, In : Shock and Vibration. 2019, p. 1-14 14 p., 6581516.

Research output: Contribution to journalArticle

Open Access
Correlation methods
Modal analysis
set theory
evaluation
Structural health monitoring

An Investigation into the Acoustic Emissions of Internal Combustion Engines with Modelling and Wavelet Package Analysis for Monitoring Lubrication Conditions

Wei, N., Gu, J. X., Gu, F., Chen, Z., Li, G. & Ball, A., 16 Feb 2019, In : Energies. 12, 4, 19 p., 640.

Research output: Contribution to journalArticle

Open Access
Internal Combustion Engine
Acoustic Emission
Lubrication
Acoustic emissions
Internal combustion engines

A Novel Wavelet Thresholding Method for Vibration Data Denoising and Diagnostic Feature Enhancement in Condition Monitoring

Rabeyee, K., Xu, Y., Gu, F. & Ball, A. D., 11 Nov 2019, 2019 25th IEEE International Conference on Automation and Computing, ICAC 2019: Improving Productivity through Automation and Computing. Yu, H. (ed.). Institute of Electrical and Electronics Engineers Inc., 6 p. 8894986

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wavelet Thresholding
Condition Monitoring
Condition monitoring
Denoising
Thresholding
4 Citations (Scopus)

A Performance Evaluation of Two Bispectrum Analysis Methods Applied to Electrical Current Signals for Monitoring Induction Motor-Driven Systems

Huang, B., Feng, G., Tang, X., Gu, J. X., Xu, G., Cattley, R., Gu, F. & Ball, A., 15 Apr 2019, In : Energies. 12, 8, 23 p., 1438.

Research output: Contribution to journalArticle

Open Access
Bispectrum
Induction Motor
Induction motors
Performance Evaluation
Rotors

Application of minimum entropy deconvolution in diagnosis of reciprocating compressor faults based on airborne acoustic analysis

Mondal, D., Gu, F. & Ball, A., 1 Aug 2019, Sixteenth International Conference on Condition Monitoring and Asset Management (CM 2019) . British Institute of Non-Destructive Testing, Vol. 1. 139

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Reciprocating compressors
Deconvolution
Entropy
Acoustics
Condition monitoring

A review on energy harvesting supplying wireless sensor nodes for machine condition monitoring

Tang, X., Mones, Z., Wang, X., Gu, F. & Ball, A. D., 1 Jul 2019, 2018 24th IEEE International Conference on Automation and Computing ICAC 2018. Ma, X. (ed.). Institute of Electrical and Electronics Engineers Inc., 8748946

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Condition Monitoring
Energy Harvesting
Energy harvesting
Wireless Sensors
Condition monitoring

Autocorrelation Ensemble Average of Larger Amplitude Impact Transients for the Fault Diagnosis of Rolling Element Bearings

Hu, L., Xu, Y., Gu, F., He, J., Hu, N. & Ball, A., 12 Dec 2019, In : Energies. 12, 24, 19 p., 4740.

Research output: Contribution to journalArticle

Open Access
Bearings (structural)
Fault Diagnosis
Autocorrelation
Failure analysis
Ensemble

Bond Graph Modelling for Condition Monitoring of Induction Motors

Alashter, A., Cao, Y., Rabeyee, K., Alabied, S., Gu, F. & Ball, A., 24 Jun 2019, (Accepted/In press) Proceedings of COMADEM: 32nd International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management: COMADEM 2019. COMADEM International

Research output: Chapter in Book/Report/Conference proceedingConference contribution

AC motors
Condition monitoring
Induction motors
Short circuit currents
Stators

Broken Rotor Bar Detection Using Mathematical Morphology Based on Instantaneous Induction Motor Electrical Signals Analysis

Li, H., Zhen, D., Otuyemi, F., Gu, F. & Ball, A. D., 11 Nov 2019, 2019 25th International Conference on Automation and Computing, ICAC 2019: Improving Productivity through Automation and Computing. Yu, H. (ed.). Institute of Electrical and Electronics Engineers Inc., 4 p. 8894928

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mathematical morphology
Mathematical Morphology
Signal Analysis
Induction Motor
Signal analysis

Condition monitoring and fault diagnosis based on multipoint optimal minimum entropy deconvolution adjusted technique

Alqatawneh, I., Kuosheng, J., Mones, Z., Zeng, Q., Gu, F. & Ball, A. D., 1 Jul 2019, 2018 24th IEEE International Conference on Automation and Computing (ICAC): Improving Productivity through Automation and Computing. Ma, X. (ed.). Institute of Electrical and Electronics Engineers Inc., 6 p. 8748963

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gearbox
Condition Monitoring
Deconvolution
Condition monitoring
Fault Diagnosis

Correlation signal subset-based stochastic subspace identification for an online identification of railway vehicle suspension systems

Liu, F., Zhang, H., He, X., Zhao, Y., Gu, F. & Ball, A. D., 14 Mar 2019, In : Vehicle System Dynamics. 21 p.

Research output: Contribution to journalArticle

Vehicle suspensions
Monitoring
Nonlinear systems
Identification (control systems)
Wheels

Detection and Diagnosis of Centrifugal Pump Bearing Faults Based on the Envelope Analysis of Airborne Sound Signals

Daraz, A., Alabied, S., Smith, A., Gu, F. & Ball, A., 1 Jul 2019, 2018 24th International Conference on Automation and Computing (ICAC). Ma, X. (ed.). Institute of Electrical and Electronics Engineers Inc., 6 p. 8749053

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Centrifugal pumps
Acoustic waves
Pumps
Signal processing

Diagnosing lubricant shortages in gearboxes using instantaneous phases from electrical signals

Hamad, N., Sun, X., Zhang, R., Abusaad, S., Gu, F. & Ball, A. D., 1 Jul 2019, 2018 24th IEEE International Conference on Automation and Computing (ICAC): Improving Productivity through Automation and Computing. Ma, X. (ed.). Institute of Electrical and Electronics Engineers Inc., 8748999

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gearbox
Shortage
Instantaneous
Lubricants
Diagnostics

Diagnosing the change in the internal clearances of rolling element bearings based on vibration signatures

Rabeyee, K., Tang, X., Xu, Y., Zhen, D., Gu, F. & Ball, A. D., 1 Jul 2019, 2018 24th IEEE International Conference on Automation and Computing (ICAC): Improving Productivity through Automation and Computing. Ma, X. (ed.). Institute of Electrical and Electronics Engineers Inc., 6 p. 8749121

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bearings (structural)
Clearance
Signature
Vibration
Wear of materials

Dynamic modeling and chatter analysis of a spindle-workpiece-tailstock system for the turning of flexible parts

Lu, K., Wang, Y., Gu, F., Pang, X. & Ball, A., 1 Oct 2019, In : International Journal of Advanced Manufacturing Technology. 104, 5-8, p. 3007-3015 9 p.

Research output: Contribution to journalArticle

Bearings (structural)
Stiffness
Chucks
Cutting tools
Parameter estimation

Dynamic Modeling and Structural Optimization of a Bistable Electromagnetic Vibration Energy Harvester

Zhang, B., Zhang, Q., Wang, W., Han, J., Tang, X., Gu, F. & Ball, A. D., 23 Jun 2019, In : Energies. 12, 12, p. 1-19 19 p., 2410.

Research output: Contribution to journalArticle

Open Access
Harvesters
Structural optimization
Structural Optimization
Dynamic Modeling
Membrane

Dynamics analysis of a hollow-shaft rotor system with an open crack under model uncertainties

Fu, C., Xu, Y., Yang, Y., Lu, K., Gu, F. & Ball, A., 6 Nov 2019, In : Communications in Nonlinear Science and Numerical Simulation. 83, 18 p., 105102.

Research output: Contribution to journalArticle

Model Uncertainty
Dynamic Analysis
Dynamic analysis
Rotor
Crack
1 Citation (Scopus)

Effect of foam copper interlayer on the mechanical properties and fretting wear of sandwich clinched joints

Lei, L., He, X., Xing, B., Zhao, D., Gu, F. & Ball, A., Dec 2019, In : Journal of Materials Processing Technology. 274, 10 p., 116285.

Research output: Contribution to journalArticle

Foams
Copper
Wear of materials
Mechanical properties
Fatigue of materials

Effects of Bounded Uncertainties on the Dynamic Characteristics of an Overhung Rotor System with Rubbing Fault

Fu, C., Zhen, D., Yang, Y., Gu, F. & Ball, A., 15 Nov 2019, In : Energies. 12, 22, 15 p., 4365.

Research output: Contribution to journalArticle

Open Access
Dynamic Characteristics
Rotor
Fault
Rotors
Uncertainty

Empirical mode decomposition of motor current signatures for centrifugal pump diagnostics

Alabied, S., Haba, U., Daraz, A., Gu, F. & Ball, A. D., 1 Jul 2019, 2018 24th IEEE International Conference on Automation and Computing (ICAC): Improving Productivity through Automation and Computing. Ma, X. (ed.). Institute of Electrical and Electronics Engineers Inc., 8749109

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal Pump
Centrifugal pumps
Diagnostics
Fault
Signature
1 Citation (Scopus)

Exploiting Bayesian networks for fault isolation: A diagnostic case study of diesel fuel injection system

Wang, J., Wang, Z., Stetsyuk, V., Ma, X., Gu, F. & Li, W., Mar 2019, In : ISA Transactions. 86, p. 276-286 11 p.

Research output: Contribution to journalArticle

Open Access
File
Fault Isolation
diesel fuels
fuel injection
Fuel injection
Bayesian networks

Extraction of Information From Vibration Data Using Double Density Discrete Wavelet Analysis for Condition Monitoring

Rabeyee, K., Xu, Y., Alabied, S., Gu, F. & Ball, A., 1 Aug 2019, Sixteenth International Conference on Condition Monitoring and Asset Management (CM 2019) . British Institute of Non-Destructive Testing, 149467

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wavelet analysis
Discrete wavelet transforms
Condition monitoring
Fault detection
Failure analysis
3 Citations (Scopus)

Extraction of the largest amplitude impact transients for diagnosing rolling element defects in bearings

Hu, L., Zhang, L., Gu, F., Hu, N. & Ball, A., 1 Feb 2019, In : Mechanical Systems and Signal Processing. 116, p. 796-815 20 p.

Research output: Contribution to journalArticle

Open Access
File
Bearings (structural)
Defects
Tachometers
White noise
Demodulation

Fault Diagnosis for Planetary Gearbox Using On-Rotor MEMS Sensor and EMD Analysis

Mones, Z., Alqatawneh, I., Zhen, D., Gu, F. & Ball, A. D., 11 Nov 2019, 2019 25th IEEE International Conference on Automation and Computing, ICAC 2019 : Improving Productivity through Automation and Computing. Yu, H. (ed.). Institute of Electrical and Electronics Engineers Inc., 6 p. 8895155

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gearbox
Fault Diagnosis
Micro-electro-mechanical Systems
Rotor
Failure analysis

Fault Diagnosis of Broken Rotor Bar in AC Induction Motor based on A Qualitative Simulation Approach

Alashter, A., Gu, F., Ball, A. D. & Cao, Y., 11 Nov 2019, 2019 25th International Conference on Automation and Computing (ICAC). Yu, H. (ed.). Institute of Electrical and Electronics Engineers Inc., p. 1-6 6 p. 8895071

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Qualitative Simulation
Rotors (windings)
AC motors
Induction Motor
Fault Diagnosis

Fault diagnosis of planetary gearboxes via processing the on-rotor MEMS accelerometer signals

Mones, Z., Zhen, D., Alqatawneh, I., Zeng, Q., Gu, F. & Ball, A. D., 1 Jul 2019, 2018 24th IEEE International Conference on Automation and Computing (ICAC): Improving Productivity through Automation and Computing. Ma, X. (ed.). Institute of Electrical and Electronics Engineers Inc., 8749050

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Gearbox
Accelerometer
Fault Diagnosis
Micro-electro-mechanical Systems
Accelerometers

Fault Diagnosis of Reciprocating Compressor Using Empirical Mode Decomposition-Based Teager Energy Spectrum of Airborne Acoustic Signal

Mondal, D., Zhen, D., Gu, F. & Ball, A., 24 Jun 2019, (Accepted/In press) Proceedings of COMADEM: 32nd International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management: COMADEM 2019. Springer

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Reciprocating compressors
Failure analysis
Acoustics
Decomposition
Spectrum analysis
6 Citations (Scopus)

Fault feature extraction for rolling element bearing diagnosis based on a multi-stage noise reduction method

Guo, J., Zhen, D., Li, H., Shi, Z., Gu, F. & Ball, A. D., Jun 2019, In : Measurement: Journal of the International Measurement Confederation. 139, p. 226-235 10 p.

Research output: Contribution to journalArticle

Bearings (structural)
Noise abatement
noise reduction
pattern recognition
Feature extraction
1 Citation (Scopus)

Fault Identification for a Closed-Loop Control System Based on an Improved Deep Neural Network

Sun, B., Wang, J., He, Z., Zhou, H. & Gu, F., 8 May 2019, In : Sensors (Switzerland). 19, 9, 18 p.

Research output: Contribution to journalArticle

Open Access
Closed loop control systems
Identification (control systems)
Noise
Social Adjustment
satellite attitude control

Modelling in-cylinder pressures for accurate simulations of instantaneous angular speed responses to combustion faults in an IC engine powertrain

Xu, Y., Fei, J., Yun, Y., Wang, J., Gu, F. & Ball, A. D., 1 Aug 2019, Sixteenth International Conference on Condition Monitoring and Asset Management (CM 2019) . British Institute of Non-Destructive Testing, Vol. 1. 133

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Powertrains
Engine cylinders
Internal combustion engines
Ship propulsion
Monitoring

Modulation Sideband Separation Using the Teager–Kaiser Energy Operator for Rotor Fault Diagnostics of Induction Motors

Li, H., Wang, Z., Zhen, D., Gu, F. & Ball, A., 21 Nov 2019, In : Energies. 12, 23, p. 1-16 16 p., 4437.

Research output: Contribution to journalArticle

Open Access
Induction Motor
Induction motors
Rotor
Diagnostics
Modulation

Modulation Signal Bispectrum Analysis of Acoustic Signals for the Impeller Wear Detection of Centrifugal Pumps

Daraz, A., Alabied, S., Gu, F. & Ball, A. D., 11 Nov 2019, 2019 25th IEEE International Conference on Automation and Computing, ICAC 2019 : Improving Productivity through Automation and Computing. Yu, H. (ed.). Institute of Electrical and Electronics Engineers Inc., 6 p. 8895023

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal Pump
Bispectrum
Centrifugal pumps
Signal analysis
Acoustics

Modulation Signal Bispectrum Analysis of Motor Current Signals for Condition Monitoring of Electromechanical Systems

Otuyemi, F., Li, H., Liu, F., Wang, J., Gu, F. & Ball, A. D., 2019, Proceedings of the 13th International Conference on Damage Assessment of Structures. Wahab, M. A. (ed.). Springer, p. 566-581 16 p. (Lecture Notes in Mechanical Engineering).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Signal analysis
Condition monitoring
Amplitude modulation
Frequency modulation
Modulation

Monitoring nonstationary and dynamic trends for practical process fault diagnosis

Lin, Y., Kruger, U., Gu, F., Ball, A. & Chen, Q., 1 Mar 2019, In : Control Engineering Practice. 84, p. 139-158 20 p.

Research output: Contribution to journalArticle

Open Access
File
Fault Diagnosis
Failure analysis
Monitoring
Normal distribution
Industrial applications

Monitoring Nonstationary Processes Using Stationary Subspace Analysis and Fractional Integration Order Estimation

Lin, Y., Kruger, U., Gu, F., Ball, A. & Chen, Q., 24 Apr 2019, In : Industrial and Engineering Chemistry Research. 58, 16, p. 6486-6504 19 p.

Research output: Contribution to journalArticle

Process monitoring
Time series
Statistics
Monitoring

Motor Current Signal Analysis Based on Machine Learning for Centrifugal Pump Fault Diagnosis

Alabied, S., Daraz, A., Rabeyee, K., Alqatawneh, I., Gu, F. & Ball, A. D., 11 Nov 2019, 2019 25th IEEE International Conference on Automation and Computing, ICAC 2019 : Improving Productivity through Automation and Computing. Yu, H. (ed.). Institute of Electrical and Electronics Engineers Inc., 7 p. 8895057

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Centrifugal Pump
Signal Analysis
Centrifugal pumps
Signal analysis
Fault Diagnosis
Vibration analysis
Rotors
Dynamic response
Stiffness
Uncertainty

Operational Modal Analysis of Y25 Bogie via Stochastic Subspace Identification for the Condition Monitoring of Primary Suspension Systems

Liu, F., Wang, J., Li, M., Gu, F. & Ball, A. D., 2019, Proceedings of the 13th International Conference on Damage Assessment of Structures. Wahab, M. A. (ed.). Springer, p. 166-181 16 p. (Lecture Notes in Mechanical Engineering).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Condition monitoring
Modal analysis
Suspensions
Vehicle suspensions
Natural frequencies

Performance and combustion characteristics of a diesel engine fueled with waste vegetable oils

Abuhabaya, A. A. A. & Gu, F., 2 May 2019, Proceedings of 2018 6th International Renewable and Sustainable Energy Conference, IRSEC 2018. El Hibaoui, A., Essaaidi, M. & Zaz, Y. (eds.). Institute of Electrical and Electronics Engineers Inc., 7 p. 8702888

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Vegetable oils
Biodiesel
Diesel engines
Engines
Diesel fuels
1 Citation (Scopus)

Performance monitoring and fault diagnosis of vacuum pumps based on airborne sounds

Appadoo, R., Xu, Y., Gu, F. & Ball, A. D., 1 Jul 2019, 2018 24th IEEE International Conference on Automation and Computing (ICAC): Improving Productivity through Automation and Computing. Ma, X. (ed.). Institute of Electrical and Electronics Engineers Inc., 8748969

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Vacuum pumps
Performance Monitoring
Fault Diagnosis
Pump
Failure analysis

Random vibration of a finite element rotor model with crack fault via polynomial chaos expansion

Fu, C., Yang, Y., Wang, Y., Gu, F. & Ball, A., 1 Aug 2019, 16th International Conference on Condition Monitoring and Asset Management: CM 2019. British Institute of Non-Destructive Testing, Vol. 1. 107

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Chaos theory
Rotors
Polynomials
Cracks
Mechanical engineering

Rotor dynamics in a pump system with magnetoelectrical, fluid and mechanical effects using ANSYS

Tang, W., Gu, F., Mao, H., Ball, A. & Daraz, A., 1 Aug 2019, Sixteenth International Conference on Condition Monitoring and Asset Management (CM 2019) . British Institute of Non-Destructive Testing, Vol. 1. 136

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Rotors
Pumps
Fluids
Centrifugal pumps
Turbomachine blades
2 Citations (Scopus)

Self-piercing riveting of aluminium–lithium alloy sheet materials

Zhang, X., He, X., Gu, F. & Ball, A., 1 Jun 2019, In : Journal of Materials Processing Technology. 268, p. 192-200 9 p.

Research output: Contribution to journalArticle

Riveting
Piercing
Fatigue of materials
Rivets
Failure modes