Find Research Outputs

Search concepts
Selected filters

Publication Year

  • 2020
  • 2019
  • 2018
  • 2017
  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011

Author

  • Fengshou Gu
2019

Self-piercing riveting of aluminium–lithium alloy sheet materials

Zhang, X., He, X., Gu, F. & Ball, A., 1 Jun 2019, In : Journal of Materials Processing Technology. 268, p. 192-200 9 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Time-varying coupled vibration analysis of ball screw feed system

Wu, Q., Gu, F. & Ball, A., 1 Aug 2019, Sixteenth International Conference on Condition Monitoring and Asset Management (CM 2019) . British Institute of Non-Destructive Testing, Vol. 1. 127

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Tribological behaviour diagnostic and fault detection of mechanical seals based on acoustic emission measurements

Towsyfyan, H., Gu, F., Ball, A. & Liang, B., 1 Dec 2019, In : Friction. 7, 6, p. 572-586 15 p.

Research output: Contribution to journalArticle

Open Access

Vibration analysis of journal bearings under water contaminated lubrication

Ma, J., Zhang, H., Shi, Z., Kontogiorgos, V., Gu, F. & Ball, A., 1 Jul 2019, 2018 24th IEEE International Conference on Automation and Computing (ICAC): Improving Productivity through Automation and Computing. Ma, X. (ed.). Institute of Electrical and Electronics Engineers Inc., 8749016

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2018

A Gas Path Fault Contribution Matrix for Marine Gas Turbine Diagnosis Based on a Multiple Model Fault Detection and Isolation Approach

Yang, Q., Li, S., Cao, Y., Gu, F. & Smith, A., 1 Dec 2018, In : Energies. 11, 12, p. 1-21 21 p., 3316.

Research output: Contribution to journalArticle

Open Access
3 Citations (Scopus)

An investigation into vibration response for condition monitoring of reciprocating compressor based on modulation signal spectrum analysis

Haba, U., Brethee, K., Hassin, O., Gu, F. & Ball, A. D., Jul 2018, In : International Journal of COMADEM. 21, 3, p. 31-37 7 p.

Research output: Contribution to journalConference article

1 Citation (Scopus)
Open Access
32 Citations (Scopus)

A Sparse Modulation Signal Bispectrum Analysis Method for Rolling Element Bearing Diagnosis

Wang, G., Gu, F., Rehab, I., Ball, A. & Li, L., 19 Dec 2018, In : Mathematical Problems in Engineering. 2018, 12 p., 2954094.

Research output: Contribution to journalArticle

Open Access
2 Citations (Scopus)

Clinch-bonded hybrid joining for similar and dissimilar copper alloy, aluminium alloy and galvanised steel sheets

Lei, L., He, X., Zhao, D., Zhang, Y., Gu, F. & Ball, A., 1 Oct 2018, In : Thin-Walled Structures. 131, p. 393-403 11 p.

Research output: Contribution to journalArticle

Open Access
File
5 Citations (Scopus)

Early Fault Diagnosis for Planetary Gearbox Based Wavelet Packet Energy and Modulation Signal Bispectrum Analysis

Guo, J., Shi, Z., Li, H., Zhen, D., Gu, F. & Ball, A. D., 1 Sep 2018, In : Sensors (Switzerland). 18, 9, 12 p., 2908.

Research output: Contribution to journalArticle

Open Access
9 Citations (Scopus)

Energy Harvesting Technologies for Achieving Self-Powered Wireless Sensor Networks in Machine Condition Monitoring: A Review

Tang, X., Wang, X., Cattley, R., Gu, F. & Ball, A., 23 Nov 2018, In : Sensors (Switzerland). 18, 12, 39 p.

Research output: Contribution to journalReview article

Open Access
14 Citations (Scopus)

FAULT diagnosis of planetary gear drive system based on sparse decomposition optimized by generalized matching pursuit algorithm

Zhu, Z., Wang, Z., Zhang, H., Shi, Z. & Gu, F., 2018, 15th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, CM 2018/MFPT 2018. p. 533-541 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Influence of frictional excitations on the diagnostic features of helical gears under different operating conditions

Sun, X., Wang, T., Zhang, R., Gu, F. & Ball, A., 1 Dec 2018, Fifteenth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies (CM 2018/MFPT 2018). British Institute of Non-Destructive Testing, p. 522-531 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Model-based chatter stability prediction and detection for the turning of a flexible workpiece

Lu, K., Lian, Z., Gu, F. & Liu, H., 1 Feb 2018, In : Mechanical Systems and Signal Processing. 100, p. 814-826 13 p.

Research output: Contribution to journalArticle

Open Access
14 Citations (Scopus)
Open Access
File
4 Citations (Scopus)

Monitoring the tribological behaviour of piston ring-cylinder liner in a four-cylinder diesel engine by using acoustic emission signals

Xu, Y., Fei, J., Gu, F. & Ball, A., 2018, 15th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, CM 2018/MFPT 2018. p. 508-521 14 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Study on failure mechanism of mechanical clinching in aluminium sheet materials

Zhang, Y., He, X., Wang, Y., Lu, Y., Gu, F. & Ball, A., 1 Jun 2018, In : International Journal of Advanced Manufacturing Technology. 96, 9-12, p. 3057-3068 12 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

The effect of the wear evolution on vibration based fault detection in tapered roller bearings

Rabeyee, K., Tang, X., Gu, F. & Ball, A., 2018, 15th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, CM 2018/MFPT 2018. p. 475-486 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2017

A comparative study of gravitational acceleration cancellation from on-rotor MEMS accelerometers for condition monitoring

Mones, Z., Feng, G., Tang, X., Haba, U., Gu, F. & Ball, A., 2017, Proceedings of the 24th International Congress on Sound and Vibration, ICSV 2017. Gibbs, B. (ed.). International Institute of Acoustics and Vibration, IIAV

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
1 Citation (Scopus)

Acoustic feature extraction for monitoring the combustion process of diesel engine based on EMD and wavelet analysis

Fang, S., Li, S. C., Zhen, D., Shi, Z., Gu, F. & Ball, A. D., 1 Jul 2017, In : International Journal of COMADEM. 20, 3, p. 25-30 6 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

A Dynamic Deformation based Lubrication Model between the Piston Rings and Cylinder Liner

Li, G., Gu, F., Wang, T., Lu, X., Zhang, R. & Ball, A., 26 Oct 2017, Proceedings of the 23rd International Conference on Automation & Computing (University of Huddersfield, 7-8 September 2017). Institute of Electrical and Electronics Engineers Inc., 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

An Improved Lubrication Model between Piston Rings and Cylinder Liners with Consideration of Liner Dynamic Deformations

Li, G., Gu, F., Wang, T., Lu, X., Zhang, L., Zhang, C. & Ball, A., 13 Dec 2017, In : Energies. 10, 12, 22 p., 2122.

Research output: Contribution to journalArticle

Open Access
8 Citations (Scopus)

An Improved Multiobjective Particle Swarm Optimization Algorithm Using Minimum Distance of Point to Line

Fan, Z., Wang, T., Cheng, Z., Li, G. & Gu, F., 25 Sep 2017, In : Shock and Vibration. 2017, 16 p., 8204867.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

Application of wavelet packet transform and envelope analysis to non-stationary vibration signals for fault diagnosis of a reciprocating compressor

Ogbulafor, U. E., Feng, G., Mones, Z., Gu, F. & Ball, A. D., 2017, 1st World Congress on Condition Monitoring: (WCCM 2017). British Institute of Non-Destructive Testing

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

A Study Of The Diagnostic Amplitude Of Rolling Bearing Under Increasing Radial Clearance Using Modulation Signal Bispectrum

Rehab, I. A. M., Tian, X., Zhang, R., Ball, A. & Gu, F., 1 Jan 2017, In : International Journal of COMADEM. 20, 3

Research output: Contribution to journalArticle

Open Access

Bogie Speed Estimation and Signal Source Separation via Rail Vibration Analysis

Qin, G., Gu, F., Xu, Y., Liu, F. & Ball, A., Jul 2017, Proceedings of COMADEM 2017. Sherrington, I., Onsy, A., Rao, R., Brooks, H. & Philip, J. (eds.). p. 200-208 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
2 Citations (Scopus)

Condition Monitoring of Lubricant Starvation Based on Gearbox Vibration Signatures

Brethee, K., Gu, F. & Ball, A., 1 Jul 2017, In : International Journal of COMADEM. 20, 3, p. 45-52 8 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Detecting Bearing Faults Using an Ensemble Average Autocorrelation Based Stochastic Subspace Identification

Xu, Y., van Vuuren, P., Tang, X., Gu, F. & Ball, A., Jul 2017, Proceedings of COMADEM 2017. Sherrington, I., Onsy, A., Rao, R., Brooks, H. & Philip, J. (eds.). p. 389-395 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Early Detection of Rolling Bearing Faults Using an Auto-Correlated Envelope Ensemble Average

Xu, Y., Tang, X., Gu, F., Ball, A. & Gu, J. X., 26 Oct 2017, Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017). Institute of Electrical and Electronics Engineers Inc., 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Effect of friction coefficients on the dynamic response of gear systems

Jiang, L., Deng, Z., Gu, F., Ball, A. D. & Li, X., Sep 2017, In : Frontiers of Mechanical Engineering. 12, 3, p. 397-405 9 p.

Research output: Contribution to journalArticle

Open Access
5 Citations (Scopus)

Expedient identification of the dynamics of ball-screw drives using online-validation

Hatwesh, A., Fletcher, S., Longstaff, A., Pan, W. & Gu, F., 26 Oct 2017, 2017 23rd International Conference on Automation and Computing (ICAC). Institute of Electrical and Electronics Engineers Inc., 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fault Detection of Rolling Bearings Using an Ensemble Average Autocorrelation Based Stochastic Subspace Identification

Xu, Y., Li, H., Zhen, D., Rehab, I. A. M., Gu, F. & Ball, A., Sep 2017, 24th International Congress on Sound and Vibration 2017 (ICSV 24). Curran Associates, Inc, Vol. 4. p. 2607-2614 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Fault Detection of Rolling Element Bearings Using the Frequency Shift and Envelope based Compressive Sensing

Tang, X., Xu, Y., Gu, F. & Wang, G., 26 Oct 2017, Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017). Institute of Electrical and Electronics Engineers Inc., 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Fault Diagnosis of Centrifugal Pumps based on the Intrinsic Time-scale Decomposition of Motor Current signals

Alabied, S., Hamomd, O., Daraz, A., Gu, F. & Ball, A., 26 Oct 2017, Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017). Institute of Electrical and Electronics Engineers Inc., 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
2 Citations (Scopus)

Fretting behavior of self-piercing riveted joints in titanium sheet materials

Zhao, L., He, X., Xing, B., Zhang, X., Cheng, Q., Gu, F. & Ball, A., Nov 2017, In : Journal of Materials Processing Technology. 249, p. 246-254 9 p.

Research output: Contribution to journalArticle

10 Citations (Scopus)

Gear wear monitoring by modulation signal bispectrum based on motor current signal analysis

Zhang, R., Gu, F., Mansaf, H., Wang, T. & Ball, A., 15 Sep 2017, In : Mechanical Systems and Signal Processing. 94, p. 202-213 12 p.

Research output: Contribution to journalArticle

Open Access
23 Citations (Scopus)

Gear Wear Process Monitoring Using a Sideband Estimator Based on Modulation Signal Bispectrum

Zhang, R., Gu, X., Gu, F., Wang, T. & Ball, A., 10 Mar 2017, In : Applied Sciences. 7, 3, 10 p., 274.

Research output: Contribution to journalArticle

Open Access
5 Citations (Scopus)

Helical gear wear monitoring: Modelling and experimental validation

Brethee, K. F., Zhen, D., Gu, F. & Ball, A. D., Nov 2017, In : Mechanism and Machine Theory. 117, p. 210-229 20 p.

Research output: Contribution to journalArticle

Open Access
11 Citations (Scopus)

Influence of heat treatment on mechanical properties of clinched joints in titanium alloy sheets

Zhang, Y., He, X., Zeng, K., Lei, L., Gu, F. & Ball, A., 1 Aug 2017, In : International Journal of Advanced Manufacturing Technology. 91, 9-12, p. 3349-3361 13 p.

Research output: Contribution to journalArticle

11 Citations (Scopus)

Investigation into the dynamic response of cylinder liners in an IC engine based on a validated finite-element model

Li, G., Gu, F., Wang, T., Yang, T. & Ball, A., 2017, In : Systems Science & Control Engineering. 5, 1, p. 56-69 14 p.

Research output: Contribution to journalArticle

Open Access
5 Citations (Scopus)

Investigation into the Vibrational Responses of Cylinder Liners in an IC Engine Fueled with Biodiesel

Li, G., Gu, F., Wang, T., You, J. & Ball, A., 13 Jul 2017, In : Applied Sciences (Switzerland). 7, 7, 24 p., 717.

Research output: Contribution to journalArticle

Open Access
2 Citations (Scopus)
Open Access
5 Citations (Scopus)
Open Access
5 Citations (Scopus)

Monitoring gearbox oil viscosity by means of motor current signal analysis

Van Vuuren, P. A., Xu, Y., Gu, F. & Ball, A. D., 2017, 1st World Congress on Condition Monitoring: (WCCM 2017) . British Institute of Non-Destructive Testing, Vol. 1. p. 170-181 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Monitoring Gearbox Using a Wireless Temperature Node Powered by Thermal Energy Harvesting Module

Elforjani, B., Xu, Y., Brethee, K., Wu, Z., Gu, F. & Ball, A., 26 Oct 2017, Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017). Institute of Electrical and Electronics Engineers Inc., 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
2 Citations (Scopus)

Motor Current Signature Analysis for the Compound Fault Diagnosis of Reciprocating Compressors

Haba, U., Feng, G., Shaeboub, A., Peng, X., Gu, F. & Ball, A., 1 Jul 2017, In : International Journal of COMADEM. 20, 3, p. 31-37 7 p.

Research output: Contribution to journalArticle

Online estimation of engine Driveline dynamic response

Madamedon, M., Gu, F., Aburass, A. & Ball, A. D., 9 Jan 2017, 2016 International Conference for Students on Applied Engineering: ICSAE 2016. Institute of Electrical and Electronics Engineers Inc., p. 351-356 6 p. 7810216

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Planetary Gearbox Fault Diagnosis Using an On-Rotor MEMS Accelerometer

Mones, Z., Zeng, Q., Hu, L., Tang, X., Gu, F. & Ball, A., 26 Oct 2017, Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017). Institute of Electrical and Electronics Engineers Inc., 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
2 Citations (Scopus)