Find Research Outputs

Search concepts
Selected filters

Publication Year

  • 2020
  • 2019
  • 2018
  • 2017
  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011

Author

  • Fengshou Gu
2017

Planetary Gear Fault Diagnosis Based on Instantaneous Angular Speed Analysis

Zeng, Q., Mones, Z., Shao, Y., Gu, F. & Ball, A., 26 Oct 2017, Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017). Institute of Electrical and Electronics Engineers Inc., 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
2 Citations (Scopus)

Predicting Oil Film performance in a Journal Bearing based on Modulation Signal Bispectrum analysis of Vibration Signals

Hassin, O., Yao, A., Zhang, H. C., Gu, F. & Ball, A., 1 Jul 2017, In : International Journal of COMADEM. 20, 3, p. 19-24 6 p.

Research output: Contribution to journalArticle

The Identification of Shaft Current Induced Defects on Rolling Bearings in Wind Turbine Generators

Li, L., Wang, G., Deng, W., Tang, X., Gu, F. & Ball, A., 26 Oct 2017, Proceedings of the 23rd International Conference on Automation and Computing (University of Huddersfield, 7-8 September 2017). Institute of Electrical and Electronics Engineers Inc., 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Thermal Energy Harvesting in Wireless Temperature Sensor Nodes for Condition Monitoring

Elforjani, B., Feng, G., Gu, F. & Ball, A., 1 Jul 2017, In : International Journal of COMADEM. 20, 3, p. 5-11 7 p.

Research output: Contribution to journalArticle

The Validation of an ACS-SSI based Online Condition Monitoring for Railway Vehicle Suspension Systems using a SIMPACK Model

Liu, F., Gu, F., Ball, A., Zhao, Y. & Peng, B., 26 Oct 2017, Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017). Institute of Electrical and Electronics Engineers Inc., 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
2 Citations (Scopus)

Vibration Based Centrifugal Pump Fault Diagnosis Based on Modulation Signal Bispectrum Analysis

Hamomd, O., Alabied, S., Xu, Y., Daraz, A., Gu, F. & Ball, A., 26 Oct 2017, Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017). Institute of Electrical and Electronics Engineers Inc., 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
4 Citations (Scopus)

Vibration signal model for fault diagnosis of sun gear in epicyclical gearboxes

Zhang, L., Hu, N., Hu, L. & Gu, F., 1 Jul 2017, In : International Journal of COMADEM. 20, 3, p. 13-18 6 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Wavelet Packet Analysis and Empirical Mode Decomposition for the Fault Diagnosis of Reciprocating Compressors

Muo, U., Madamedon, M., Ball, A. & Gu, F., 26 Oct 2017, Proceedings of the 23rd International Conference on Automation & Computing, (University of Huddersfield, 7-8 September 2017). Institute of Electrical and Electronics Engineers Inc., 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
2 Citations (Scopus)

基于声发射和小波分析的活塞环-缸套系统的摩擦润滑状态研究

Translated title of the contribution: Friction Lubrication State of Piston Ring-Cylinder System Based on Acoustic Emission and Wavelet AnalysisShi, Q., Gu, F., Wang, T., Wei, N., Li, G. & Yang, L., 15 Aug 2017, In : Neiranji Gongcheng/Chinese Internal Combustion Engine Engineering. 38, 4, p. 97-102 6 p.

Research output: Contribution to journalArticle

2016

An investigation of electrical motor parameters in a sensorless variable speed drive for machine fault diagnosis

Hamad, N., Brethee, K. F., Gu, F. & Ball, A. D., 24 Oct 2016, 22nd International Conference on Automation and Computing: Tackling the New Challenges in Automation and Computing. Institute of Electrical and Electronics Engineers Inc., p. 329-335 7 p. 7604941

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
4 Citations (Scopus)
Open Access
13 Citations (Scopus)

A validated finite element model for predicting dynamic responses of cylinder liners in an IC engine

Li, G., Gu, F., Wei, N., Xu, Y., Ball, A. D. & Wang, T., 24 Oct 2016, 2016 22nd International Conference on Automation and Computing, ICAC 2016: Tackling the New Challenges in Automation and Computing. Institute of Electrical and Electronics Engineers Inc., p. 126-131 6 p. 7604906

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
4 Citations (Scopus)

A validation study of ACS-SSI for online condition monitoring of vehicle suspension systems

Liu, F., Gu, F., Zhao, Y. & Ball, A., 8 Dec 2016, In : Vibroengineering Procedia. 10, p. 369-375 7 p.

Research output: Contribution to journalArticle

Open Access
3 Citations (Scopus)

Detection and diagnosis of compound faults in induction motors using electric signals from variable speed drives

Shaeboub, A., Lane, M., Haba, U., Gu, F. & Ball, A. D., 24 Oct 2016, 2016 22nd International Conference on Automation and Computing, ICAC 2016: Tackling the New Challenges in Automation and Computing. Institute of Electrical and Electronics Engineers Inc., p. 306-312 7 p. 7604937

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
6 Citations (Scopus)

Fault detection and diagnosis of gear transmission systems with sensorless variable speed drives

Abusaad, S., Gu, F., Zhang, R., Benghozzi, A. & Ball, A. D., Jul 2016, In : International Journal of COMADEM. 19, 3, p. 13-17 5 p.

Research output: Contribution to journalArticle

Frictional effects on the dynamic responses of gear systems and the diagnostics of tooth breakages

Brethee, K. F., Gu, F. & Ball, A. D., 2016, In : Systems Science & Control Engineering. 4, 1, p. 270-284 15 p.

Research output: Contribution to journalArticle

Open Access
5 Citations (Scopus)

Influence of heat treatment on fatigue performances for self-piercing riveting similar and dissimilar titanium, aluminium and copper alloys

Zhang, X., He, X., Xing, B., Zhao, L., Lu, Y., Gu, F. & Ball, A., 5 May 2016, In : Materials and Design. 97, p. 108-117 10 p.

Research output: Contribution to journalArticle

Open Access
22 Citations (Scopus)

Investigation of reductions in motor efficiency caused by stator faults when operated from an inverter drive

Lane, M., Shaeboub, A., Gu, F. & Ball, A. D., 24 Oct 2016, 22nd International Conference on Automation and Computing: Tackling the New Challenges in Automation and Computing. Institute of Electrical and Electronics Engineers Inc., p. 144-149 6 p. 7604909

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access

Journal bearing condition monitoring based on the modulation signal bispectrum analysis of vibrations

Hassin, O., Yao, A., Gu, F. & Ball, A., Nov 2016, Power Engineering: Proceedings of the International Conference on Power Transmissions 2016 (ICPT 2016), Chongqing, P.R. China, 27–30 October 2016. Qin, D. & Shao, Y. (eds.). Taylor & Francis, p. 907-912 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Maintaining model efficiency, avoiding bias and reducing input parameter volume in compressor fault classification

Smith, A., Gu, F. & Ball, A., 23 Aug 2016, Proceedings of 2016 7th International Conference on Mechanical and Aerospace Engineering, ICMAE 2016. Institute of Electrical and Electronics Engineers Inc., p. 196-201 6 p. 7549534

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
1 Citation (Scopus)

Modelling, Testing and Analysis of a Regenerative Hydraulic Shock Absorber System

Wang, R., Gu, F., Cattley, R. & Ball, A., 19 May 2016, In : Energies. 9, 5, 24 p., 386.

Research output: Contribution to journalArticle

Open Access
22 Citations (Scopus)

Performance evaluation of wireless MEMS accelerometer for reciprocating compressor condition monitoring

Mones, Z., Feng, G., Ogbulaor, U. E., Wang, T., Gu, F. & Ball, A., 25 Nov 2016, Power Engineering: Proceedings of the International Conference on Power Transmissions 2016 (ICPT 2016), Chongqing, P.R. China, 27–30 October 2016. Qin, D. & Shao, Y. (eds.). CRC Press/Balkema, p. 895-900 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
1 Citation (Scopus)

Research on effect of gas-charged accumulator capacity on hydraulic regenerative shock absorber system

Wang, R., Gao, J., Gu, F. & Ball, A., May 2016, Energy and Mechanical Engineering: Proceedings of 2015 International Conference on Energy and Mechanical Engineering. Liang, S. Y. (ed.). World Scientific, p. 765-774 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2015

Achieving high bit rate logical stochastic resonance in a bistable system by adjusting parameters

Yang, D., Gu, F., Feng, G., Yang, Y. & Ball, A., 10 Oct 2015, In : Chinese Physics B. 24, 11, 110502.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Analysis of frictional effects on the dynamic response of gear systems and the implications for diagnostics

Brethee, K. F., Gao, J., Gu, F. & Ball, A. D., 30 Oct 2015, 2015 21st International Conference on Automation and Computing: Automation, Computing and Manufacturing for New Economic Growth, ICAC 2015. Institute of Electrical and Electronics Engineers Inc., 7313957

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

A new method of accurate broken rotor bar diagnosis based on modulation signal bispectrum analysis of motor current signals

Gu, F., Wang, T., Alwodai, A., Tian, X., Shao, Y. & Ball, A. D., 2015, In : Mechanical Systems and Signal Processing. 50-51, p. 400-413 14 p.

Research output: Contribution to journalArticle

56 Citations (Scopus)

An Improved Optimal Slip Ratio Prediction considering Tyre Inflation Pressure Changes

Li, G., Wang, T., Zhang, R., Gu, F. & Shen, J., 2015, In : Journal of Control Science and Engineering. 2015, 512024.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

An investigation of a hypocycloid mechanism based twin-rotor piston engine

Xu, X., Xu, H., Deng, H., Gu, F. & Talbot, C., 1 Jan 2015, In : Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 229, 1, p. 106-115 10 p.

Research output: Contribution to journalArticle

A novel method to improve the resolution of envelope spectrum for bearing fault diagnosis based on a wireless sensor node

Feng, G., Zhen, D., Tian, X., Gu, F. & Ball, A. D., 2015, Vibration Engineering and Technology of Machinery - Proceedings of VETOMAC X, 2014. Kluwer Academic Publishers, Vol. 23. p. 765-775 11 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

A novel procedure for diagnosing multiple faults in rotating machinery

Wang, Z., Han, Z., Gu, F., Gu, J. X. & Ning, S., 1 Mar 2015, In : ISA Transactions. 55, p. 208-218 11 p.

Research output: Contribution to journalArticle

43 Citations (Scopus)

A study of diagnostic signatures of a deep groove ball bearing based on a nonlinear dynamic model

Rehab, I., Tian, X., Gu, F. & Ball, A. D., 2015, 2015 21st International Conference on Automation and Computing: Automation, Computing and Manufacturing for New Economic Growth, ICAC 2015. New York: Institute of Electrical and Electronics Engineers Inc., 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
2 Citations (Scopus)

Characterisation of acoustic emissions for the frictional effect in engines using wavelets based multi-resolution analysis

Wei, N., Gu, F., Wang, T., Li, G., Xu, Y., Yang, L. & Ball, A. D., 30 Oct 2015, 2015 21st International Conference on Automation and Computing: Automation, Computing and Manufacturing for New Economic Growth, ICAC 2015. Institute of Electrical and Electronics Engineers Inc., 7313961

Research output: Chapter in Book/Report/Conference proceedingConference contribution

6 Citations (Scopus)

Characterizing the Dynamic Response of a Chassis Frame in a Heavy-Duty Dump Vehicle Based on an Improved Stochastic System Identification

Chen, Z., Wang, T., Gu, F. & Zhang, R., 2015, In : Shock and Vibration. 2015, 374083.

Research output: Contribution to journalArticle

Open Access
9 Citations (Scopus)

Combustion Noise Analysis for Combustion and Fuels Diagnosis of a Compression Ignition Diesel Engine Operating with Biodiesels

Zhen, D., Song, Z., Shi, Z., Gu, F. & Ball, A., 2 Dec 2015, In : Combustion Science and Technology. 187, 12, p. 1974-1992 19 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Detection and diagnosis of motor stator faults using electric signals from variable speed drives

Shaeboub, A., Abusaad, S., Hu, N., Gu, F. & Ball, A., 2 Nov 2015, Proceedings of the 21st International Conference on Automation & Computing. IEEE, 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Open Access
5 Citations (Scopus)

Diagnosis of combination faults in a planetary gearbox using a modulation signal bispectrum based sideband estimator

Tian, X., Abdallaa, G. M., Rehab, I., Gu, F., Ball, A. D. & Wang, T., 2 Nov 2015, 2015 21st International Conference on Automation and Computing (ICAC 2015). IEEE, p. 203-208 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Citations (Scopus)

Enhanced detection of rolling element bearing fault based on averaged stochastic resonance

Hu, N., Hu, L., Zhang, L., Hou, W. & Gu, F., 1 Oct 2015, In : International Journal of COMADEM. 18, 4, p. 11-15 5 p.

Research output: Contribution to journalArticle

Identification of lubrication regimes in mechanical seals using acoustic emission for condition monitoring

Towsyfyan, H., Wei, N., Gu, F. & Ball, A. D., 2015, 54th Annual British Conference of Non-Destructive Testing, NDT 2015. British Institute of Non-Destructive Testing

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Implementation of envelope analysis on a wireless condition monitoring system for bearing fault diagnosis

Feng, G., Gu, J., Zhen, D., Aliwan, M., Gu, F. & Ball, A. D., 1 Feb 2015, In : International Journal of Automation and Computing. 12, 1, p. 14-24 11 p.

Research output: Contribution to journalArticle

12 Citations (Scopus)

Influence of sheet thickness on fatigue behavior and fretting of self-piercing riveted joints in aluminum alloy 5052

Zhao, L., He, X., Xing, B., Lu, Y., Gu, F. & Ball, A., 15 Dec 2015, In : Materials and Design. 87, p. 1010-1017 8 p.

Research output: Contribution to journalArticle

34 Citations (Scopus)

Investigation of Motor Current Signature Analysis in Detecting Unbalanced Motor Windings of an Induction Motor with Sensorless Vector Control Drive

Lane, M., Ashari, D., Gu, F. & Ball, A. D., 15 Aug 2015, Vibration Engineering and Technology of Machinery: Proceedings of VETOMAC X 2014, held at the University of Manchester, UK, September 9-11, 2014. Sinha, J. K. (ed.). Cham: Springer Netherlands, p. 801-810 10 p. (Mechanisms and Machine Science; vol. 23).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Investigation of motor current signature analysis to detect motor resistance imbalances

Lane, M., Ashari, D., Gu, F. & Ball, A. D., 2 Nov 2015, 2015 21st International Conference on Automation and Computing: Automation, Computing and Manufacturing for New Economic Growth, ICAC 2015. Institute of Electrical and Electronics Engineers Inc., 7313945

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Investigation of the effect of biodiesel blends on fuel injection pumps based on vibration and pressure measurements

Abruss, A., Guo, Y., Wang, T., Gu, F., Ball, A. D. & Brown, D., 2015, Vibration Engineering and Technology of Machinery - Proceedings of VETOMAC X, 2014. Kluwer Academic Publishers, Vol. 23. p. 535-546 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Mechanical properties of extensible die clinched joints in titanium sheet materials

He, X., Zhang, Y., Xing, B., Gu, F. & Ball, A., 15 Apr 2015, In : Materials and Design. 71, p. 26-35 10 p.

Research output: Contribution to journalArticle

56 Citations (Scopus)
Open Access
6 Citations (Scopus)

Self-piercing riveting of similar and dissimilar metal sheets of aluminum alloy and copper alloy

He, X., Zhao, L., Deng, C., Xing, B., Gu, F. & Ball, A., 1 Jan 2015, In : Materials and Design. 65, p. 923-933 11 p.

Research output: Contribution to journalArticle

42 Citations (Scopus)

Self-piercing riveting of similar and dissimilar titanium sheet materials

He, X., Wang, Y., Lu, Y., Zeng, K., Gu, F. & Ball, A., 1 May 2015, In : International Journal of Advanced Manufacturing Technology. 80, 9-12, p. 2105-2115 11 p.

Research output: Contribution to journalArticle

28 Citations (Scopus)

The average correlation signal based stochastic subspace identification for the online modal analysis of a dump truck frame

Chen, Z., Wang, T., Gu, F., Zhang, R. & Shen, J., 2015, In : Journal of Vibroengineering. 17, 4, p. 1971-1988 18 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)
2 Citations (Scopus)