Find Research Outputs

Search results

• 2020

  An Overview of Synthetic Jet Under Different Clamping and Amplitude Modulation Techniques

  Azzawi, I. D. J., Jaworski, A. J. & Mao, X., 4 Dec 2020, In: Journal of Fluids Engineering, Transactions of the ASME. 143, 3, FE-20-1384.

  Research output: Contribution to journal › Article › peer-review

  • Amplitude modulation
  • Actuators
  • Diaphragms
  • Metals
  • cavity

• A Simplified Numerical Approach to Examine the Sensitivity of Two-Electrode Capacitance Sensor Orientation to Capture Different Gas–Liquid Flow Patterns in a Small Circular Pipe

  Al-Alweet, F., Jaworski, A. J., Alghamdi, Y., Almutairi, Z. & Kołłątaj, J., 2 Sep 2020, In: Sensors. 20, 17, p. 1-30 30 p., 4971.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Flow patterns
  • Electrodes
  • Capacitance
  • flow distribution
  • capacitance

• Experimental study of heat transfer characteristics of finned-tube and circular-pore heat exchangers in oscillatory flow

  Piccolo, A. & Jaworski, A. J., 25 Nov 2020, In: Applied Thermal Engineering. 181, 10 p., 116022.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Heat exchangers
  • Heat transfer coefficients
  • Heat transfer
  • Tubes (components)
  • Engines
  1 Citation (Scopus)

• Systematic Frequency and Statistical Analysis Approach to Identify Different Gas–Liquid Flow Patterns Using Two Electrodes Capacitance Sensor: Experimental Evaluations

  Al-Alweet, F., Jaworski, A. J., Alghamdi, Y., Almutairi, Z. & Kołłątaj, J., 8 Jun 2020, In: Energies. 13, 11, 32 p., 2932.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Experimental Evaluation
  • Flow Pattern
  • Frequency Analysis
  • Capacitance
  • Electrode
  1 Citation (Scopus)
• 2019

  Development and Assessment of Two-Stage Thermoacoustic Electricity Generator

  Hamood, A., Jaworski, A. J. & Mao, X., 11 May 2019, In: Energies. 12, 9, p. 1-18 18 p., 1790.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Thermoacoustic engines
  • Thermoacoustics
  • Electricity
  • Acoustics
  • Acoustic impedance
  4 Citations (Scopus)

• Experimental investigation of the flow structures over a 40° swept wing

  Zhang, S., Jaworski, A. J., McParlin, S. C. & Turner, J. T., 27 Feb 2019, In: Aeronautical Journal. 123, 1259, p. 39-55 17 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Swept wings
  • Flow structure
  • Flow patterns
  • Reynolds number
  • Oils
  2 Citations (Scopus)

• Experimental investigations of the performance of a thermoacoustic electricity generator

  Hamood, A. & Jaworski, A., 24 Sep 2019, In: E3S Web of Conferences. 116, 8 p., 00025.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Thermoacoustics
  • electricity
  • Electricity
  • acoustic wave
  • exhaust gas

• Numerical simulation of the effect of plate spacing on heat transfer characteristics within a parallel-plate heat exchanger in a standing wave thermoacoustic system

  Huang, H. & Jaworski, A. J., 24 Sep 2019, In: E3S Web of Conferences. 116, 9 p., 28.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Thermoacoustics
  • standing wave
  • Plates (structural components)
  • heat transfer
  • Heat exchangers

• Numerical studies of co-axial travelling-wave thermoacoustic cooler powered by standing-wave thermoacoustic engine

  Saechan, P. & Jaworski, A. J., Aug 2019, In: Renewable Energy. 139, p. 600-610 11 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Thermoacoustic engines
  • Thermoacoustics
  • Regenerators
  • Cooking
  • Waste heat
  7 Citations (Scopus)

• Special Issue “Fluid Flow and Heat Transfer”

  Jaworski, A. J., 7 Aug 2019, In: Energies. 12, 16, 4 p., 3044.

  Research output: Contribution to journal › Editorial › peer-review

  Open Access

• Two-stage travelling-wave thermoacoustic electricity generator for rural areas of developing countries

  Abdoulla-Latiwish, K. O. A. & Jaworski, A. J., 1 Aug 2019, In: Applied Acoustics. 151, p. 87-98 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • rural areas
  • linear alternators
  • electricity
  • traveling waves
  • generators
  4 Citations (Scopus)
• 2018

  Bubble size and bubble rise velocity estimation by means of electrical capacitance tomography within gas-solids fluidized beds

  Li, X., Jaworski, A. J. & Mao, X., 1 Mar 2018, In: Measurement: Journal of the International Measurement Confederation. 117, p. 226-240 15 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Electrical Capacitance Tomography
  • Fluidized Bed
  • Bubble
  • Fluidized beds
  • Tomography
  15 Citations (Scopus)

• Comparative study of two non-intrusive measurement methods for bubbling gas-solids fluidized beds: Electrical capacitance tomography and pressure fluctuations

  Li, X., Jaworski, A. J. & Mao, X., 1 Aug 2018, In: Flow Measurement and Instrumentation. 62, p. 255-268 14 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Electrical Capacitance Tomography
  • nonintrusive measurement
  • Fluidized Bed
  • Comparative Study
  • Fluidized beds
  16 Citations (Scopus)

• Design and construction of a two-stage thermoacoustic electricity generator with push-pull linear alternator

  Hamood, A., Jaworski, A. J., Mao, X. & Simpson, K., 1 Feb 2018, In: Energy. 144, p. 61-72 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Acoustic generators
  • Thermoacoustics
  • Electricity
  • Heat
  • engine
  10 Citations (Scopus)

• Experimental and Numerical Investigations of Thermal Characteristics of Heat Exchangers in Oscillatory Flow

  Ilori, O. M., Jaworski, A. J. & Mao, X., 5 Nov 2018, In: Applied Thermal Engineering. 144, p. 910–925 16 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Heat exchangers
  • Hot Temperature
  • Thermoacoustic engines
  • Tubes (components)
  • Pressure drop
  7 Citations (Scopus)

• Thermoacoustic cooler to meet medical storage needs of rural communities in developing countries

  Saechan, P. & Jaworski, A. J., Sep 2018, In: Thermal Science and Engineering Progress. 7, p. 164-175 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Thermoacoustic engines
  • Cold storage
  • Propane
  • Gas burners
  • Thermoacoustics
  7 Citations (Scopus)

• Thermoacoustic cooler to meet medical storage needs of rural communities in developing countries – High pressure system

  Saechan, P. & Jaworski, A. J., Dec 2018, In: Thermal Science and Engineering Progress. 8, p. 31-46 16 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Thermoacoustics
  • Thermoacoustic engines
  • Developing countries
  • Biomedical equipment
  • Cooling
  4 Citations (Scopus)
• 2017

  Editorial for special issue: "Heat transfer processes in oscillatory flow conditions"

  Jaworski, A. J., 26 Sep 2017, In: Applied Sciences (Switzerland). 7, 10, 3 p., 944.

  Research output: Contribution to journal › Editorial › peer-review

  Open Access

  File

• Experimental investigation of thermal performance of random stack materials for use in standing wave thermoacoustic refrigerators

  Yahya, S. G., Mao, X. & Jaworski, A. J., Mar 2017, In: International Journal of Refrigeration. 75, p. 52-63 12 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Thermoacoustics
  • Refrigerators
  • Hot Temperature
  • Costs
  • Compaction
  14 Citations (Scopus)

• Friction Factor Correlation for Regenerator Working in a Travelling-Wave Thermoacoustic System

  Mohd Saat, F. A. Z. & Jaworski, A. J., 5 Mar 2017, In: Applied Sciences. 7, 3, 19 p., 253.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Thermoacoustics
  • friction factor
  • regenerators
  • Regenerators
  • traveling waves
  7 Citations (Scopus)

• Numerical Predictions of Early Stage Turbulence in Oscillatory Flow across Parallel-Plate Heat Exchangers of a Thermoacoustic System

  Mohd Saat, F. A. Z. & Jaworski, AJ., Jul 2017, In: Applied Sciences. 7, 7, 22 p., 673.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Thermoacoustics
  • Parallel flow
  • heat exchangers
  • parallel plates
  • Shear stress
  12 Citations (Scopus)

• The Effect of Temperature Field on Low Amplitude Oscillatory Flow within a Parallel-Plate Heat Exchanger in a Standing Wave Thermoacoustic System

  Mohd Saat, F. A. Z. & Jaworski, AJ., 20 Apr 2017, In: Applied Sciences. 7, 4, 29 p., 417.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Thermoacoustics
  • heat exchangers
  • parallel plates
  • Heat exchangers
  • Temperature distribution
  11 Citations (Scopus)

• Thermoacoustic micro-electricity generator for rural dwellings in developing countries driven by waste heat from cooking activities

  Abdoulla-Latiwish, K. O. A., Mao, X. & Jaworski, A. J., 1 Sep 2017, In: Energy. 134, p. 1107-1120 14 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  File

  • Developing Countries
  • Thermoacoustics
  • Electricity
  • waste heat
  • Cooking
  16 Citations (Scopus)
• 2016

  Application of a Twin-plane Electrical Capacitance Tomography Sensor for Characterising Bubble Behaviour in a Gas-solids Fluidized Bed

  Li, X., Jaworski, A. & Mao, X., 1 Jul 2016, Lecture Notes in Engineering and Computer Science: Proceedings of The World Congress on Engineering 2017, WCE 2017, 5-7 July, 2017, London, U.K. Ao, S. I., Gelman, L., Hukins, D. W. L., Hunter, A. & Korsunsky, A. M. (eds.). Newswood Limited, Vol. 2. p. 1100-1105 6 p. (Lecture Notes in Engineering and Computer Science; vol. 2230).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  • beds
  • capacitance
  • tomography
  • bubbles
  • sensors

• Design, fabrication and characterization of low speed open-jet wind tunnel

  Azzawi, I. D. J., Mao, X. & Jaworski, A. J., 2016, Proceedings of the World Congress on Engineering. Ao, S. I., Gelman, L., Hukins, D. W. L., Hunter, A. & Korsunsky, A. M. (eds.). Newswood Limited, Vol. II. p. 883-888 6 p. (Lecture Notes in Engineering and Computer Science; vol. 2224).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  • wind tunnels
  • aerodynamics
  • diffusers
  • actuators
  • combs (social insects)
  3 Citations (Scopus)

• Investigation of bubble behaviour in a gas-solid fluidized bed by means of a twin-plane ECT sensor

  Li, X., Jaworski, AJ. & Mao, X., 2016, Proceedings of the 8th World Congress on Industrial Process Tomography, (Iguassu Falls, Brazil: 26-29 September 2016). International Society for Industrial Process Tomography, B4. (World Congress on Industrial Process Tomography).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • beds
  • capacitance
  • tomography
  • bubbles
  • sensors

• Thermal performance of finned-tube thermoacoustic heat exchangers in oscillatory flow conditions

  Kamsanam, W., Mao, X. & Jaworski, AJ., Mar 2016, In: International Journal of Thermal Sciences. 101, p. 169-180 12 p.

  Research output: Contribution to journal › Article › peer-review

  • Thermoacoustics
  • heat exchangers
  • tube heat exchangers
  • Tubes (components)
  • Heat exchangers
  15 Citations (Scopus)

• Two-stage Looped-tube Thermoacoustic Cooler – Design and Preliminary Testing

  Yahya, SG., Mao, X. & Jaworski, AJ., 1 Jul 2016, Proceedings of the World Congress on Engineering (WCE), (London, June 29 - July 1 2016). Ao, S. I., Gelman, L., Hukins, D. W. L., Hunter, A. & Korsunsky, A. M. (eds.). Newswood Limited, Vol. II. p. 1044-1049 6 p. (Lecture Notes in Engineering and Computer Science; vol. 2224).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  • Thermoacoustics
  • Acoustics
  • Refrigerators
  • Testing
  • Loudspeakers
  2 Citations (Scopus)

• Two-Stage Thermoacoustic Electricity Generator for Waste Heat Recovery

  Hamood, A., Mao, X. & Jaworski, AJ., 1 Jul 2016, Proceedings of World Congress on Engineering, (London, 29 June - 1 July 2016). Ao, S. I., Gelman, L., Hukins, D. W. L., Hunter, A. & Korsunsky, A. M. (eds.). Newswood Limited, Vol. II. p. 944-949 6 p. (Lecture Notes in Engineering and Computer Science; vol. 2224).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  • Thermoacoustics
  • Waste heat utilization
  • Acoustics
  • Electricity
  • Regenerators
• 2015

  CFD study of oscillatory flow through 90º bends of thermoacoustic devices

  Ilori, OM., Mao, X. & Jaworski, AJ., 1 Aug 2015, Proceedings of the 24th IIR International Congress on Refrigeration (ICR): Improving Quality of Life, Preserving the Earth, (Yokohama, Japan: 16-22 August 2015). International Institute of Refrigeration, 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Thermoacoustics
  • Acoustics
  • Computational fluid dynamics
  • Computer simulation
  • Lead

• Characterization of inexpensive stack materials for use in standing wave thermoacoustic refrigerators

  Yahya, SG., Mao, X. & Jaworski, AJ., 1 Aug 2015, Proceedings of the 24th IIR International Congress of Refrigeration (ICR): Improving Quality of Life, Preserving the Earth, (Yokohama, Japan: 16-22 August 2015). International Institute of Refrigeration, 8 p. 526

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • thermoacoustic refrigerators
  • characterization
  • thermoacoustic effects
  • costs
  • Mylar (trademark)

• Design a two-stage looped-tube thermoacoustic cooler for thermal management of enclosures

  Yahya, S. G., Mao, X. & Jaworski, A. J., 1 Jan 2015, 24th IIR International Congress of Refrigeration, ICR 2015. International Institute of Refrigeration, 8 p. 528

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Thermoacoustics
  • coolers
  • enclosure
  • Enclosures
  • Temperature control
  3 Citations (Scopus)

• Design of two-stage thermoacoustic stirling engine coupled with push-pull linear alternator for waste heat recovery

  Hamood, A., Mao, X. & Jaworski, AJ., 1 Aug 2015, Proceedings of the 24th IIR International Congress of Refrigeration (ICR): Improving Quality of Life, Preserving the Earth, (Yokohama, Japan: 16-22 August 2015). International Institute of Refrigeration, 8 p. 531

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Thermoacoustics
  • Stirling engines
  • Waste heat utilization
  • Electricity
  • Waste heat

• Development of experimental techniques for measurement of heat transfer rates in heat exchangers in oscillatory flows

  Kamsanam, W., Mao, X. & Jaworski, AJ., Apr 2015, In: Experimental Thermal and Fluid Science. 62, p. 202-215 14 p.

  Research output: Contribution to journal › Article › peer-review

  • Heat exchangers
  • Heat transfer
  • Heat transfer coefficients
  • Gases
  • Thermoacoustics
  8 Citations (Scopus)

• Modal and non-modal stabilities of flow around a stack of plates

  Theobald, R., Mao, X., Jaworski, A. & Berson, A., 1 Sep 2015, In: European Journal of Mechanics, B/Fluids. 53, p. 113-118 6 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Vortex Shedding
  • base flow
  • Perturbation
  • perturbation
  • vortex shedding
  1 Citation (Scopus)

• Numerical analysis of the heat transfer in an oscillatory flow around the heat exchangers of thermoacoustic systems

  Ilori, O. M., Jaworski, A. J. & Mao, X., 2015, Proceedings of CHT-15: 6th International Symposium on Advances in Computational Heat Transfer, May 25-29, 2015, Rutgers University, New Brunswick, NJ, USA. p. 1052-1066

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • heat exchangers
  • numerical analysis
  • heat transfer
  • heat sinks
  • wall temperature

• Numerical simulation of oscillatory flow and heat transfer in the heat exchangers of thermoacoustic systems

  Ilori, O. M., Mao, X. & Jaworski, AJ., 16 Aug 2015, Proceedings of the 24th IIR International Congress of Refrigeration (ICR). International Institute of Refrigeration, p. 1308-1315 8 p. 522

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • heat exchangers
  • oscillating flow
  • heat transfer
  • entrances
  • simulation
  1 Citation (Scopus)

• Optimal design of a thermoacoustic system comprising of a standing-wave engine driving a travelling-wave cooler

  Saechan, P., Mao, X. & Jaworski, A. J., 1 Jan 2015, 24th IIR International Congress of Refrigeration, ICR 2015. International Institute of Refrigeration, p. 1316-1323 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Thermoacoustics
  • coolers
  • traveling waves
  • engines
  • Thermoacoustic engines
  1 Citation (Scopus)
• 2014

  CFD-simulation of oscillatory flow around the heat exchangers of thermoacoustic devices

  Ilori, O. M., Mao, X. & Jaworski, A. J., 14 Nov 2014, Proceedings of ASME 2014 International Mechanical Engineering Congress and Exposition: Montreal, Quebec, Canada, November 14–20. American Society of Mechanical Engineers (ASME), 8 p. IMECE2014-37926

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Thermoacoustics
  • Heat exchangers
  • Computational fluid dynamics
  • Computer simulation
  • Acoustics
  2 Citations (Scopus)

• Experimental study of heat transfer in oscillatory gas flow inside a parallel-plate channel with imposed axial temperature gradient

  Yu, Z., Mao, X. & Jaworski, AJ., Oct 2014, In: International Journal of Heat and Mass Transfer. 77, p. 1023-1032 10 p.

  Research output: Contribution to journal › Article › peer-review

  • parallel plates
  • Thermal gradients
  • Flow of gases
  • gas flow
  • temperature gradients
  27 Citations (Scopus)
• 2013

  Design of thermoacoustic rig for the analysis of thermal and hydraulic performance of heat exchangers in oscillatory flow

  Ilori, OM., Mao, X. & Jaworski, AJ., 2013, Lecture Notes in Engineering and Computer Science. Newswood Limited, Vol. III. p. 1669-1674 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  • heat exchangers
  • hydraulics
  • pressure drop
  • performance
  • aerodynamics
  3 Citations (Scopus)

• Development of thermoacoustic devices for power generation and refrigeration

  Jaworski, AJ. & Mao, X., 2013, In: Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy. 227, 7, p. 762-782 21 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Thermoacoustics
  • Refrigeration
  • Power generation
  • Electricity
  • Thermoacoustic engines
  22 Citations (Scopus)

• Experimental investigation of heat transfer effectiveness on finned-tube thermoacoustic heat exchanger

  Kamsanam, W., Mao, X. & Jaworski, A. J., 25 Nov 2013, Proceedings of the World Congress on Engineering 2013, WCE 2013. Vol. 3 LNECS. p. 1979-1984 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Thermoacoustics
  • Heat exchangers
  • Heat transfer
  • Hot Temperature
  • Tubes (components)

• Oscillatory flow and heat transfer within parallel-plate heat exchangers of thermoacoustic systems

  Saat, F. A. Z. M. & Jaworski, A. J., 25 Nov 2013, Proceedings of the World Congress on Engineering 2013, WCE 2013. Vol. 3 LNECS. p. 1699-1704 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Thermoacoustics
  • Heat exchangers
  • Heat transfer
  • Vorticity
  • Turbulence models
  2 Citations (Scopus)

• Thermoacoustic refrigerator driven by a combustion-powered thermoacoustic engine - Demonstrator of device for rural areas of developing countries

  Saechan, P., Kang, H., Mao, X. & Jaworski, A. J., 25 Nov 2013, Proceedings of the World Congress on Engineering 2013, WCE 2013. Vol. 3 LNECS. p. 2097-2102 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • Thermoacoustic engines
  • Thermoacoustics
  • Refrigerators
  • Developing countries
  • Gas burners
  2 Citations (Scopus)

• Thermoacoustic travelling-wave cooler driven by a cascade thermoacoustic engine

  Kang, H., Jiang, F., Zheng, H. & Jaworski, A. J., 25 Sep 2013, In: Applied Thermal Engineering. 59, 1-2, p. 223-231 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Thermoacoustic engines
  • Thermoacoustics
  • Acoustics
  • Acoustic fields
  • Regenerators
  9 Citations (Scopus)

• Travelling wave thermoacoustic electricity generator for rural areas using a side-branch alternator arrangement

  Abdoulla, K., Kang, H. & Jaworski, AJ., 2013, Proceedings of the World Congress on Engineering 2013. Lecture Notes in Engineering and Computer Science. Ao, SI., Gelman, L., Hukins, DWL., Hunter, A. & Korunsky, A. (eds.). Newswood Limited, Vol. 3. p. 1835-1840 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)
• 2012

  CFD modelling of flow and heat transfer within the parallel plate heat exchanger in standing wave thermoacoustic system

  Saat, F. A. Z. M., Jaworski, A. J., Mao, X. & Yu, Z., 1 Dec 2012, 19th International Congress on Sound and Vibration 2012, ICSV 2012. Vol. 2. p. 936-943 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • heat exchangers
  • computational fluid dynamics
  • parallel plates
  • heat transfer
  • temperature profiles
  2 Citations (Scopus)

• Demonstrator of a combustion driven thermoacoustic electricity generator for remote and rural areas of developing countries

  Yu, Z. & Jaworski, A. J., 1 Dec 2012, 19th International Congress on Sound and Vibration 2012, ICSV 2012. Vol. 2. p. 1581-1588 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  • rural areas
  • electricity
  • engines
  • generators
  • AC generators
  3 Citations (Scopus)

• Design and experimental evaluation of a travelling wave thermoacoustic cooler driven by a standing wave thermoacoustic engine

  Saechan, P., Yu, Z. & Jaworski, AJ., 1 Dec 2012, Proceedings of the 19th International Conference on Sound and Vibration (ICSV) 2012. International Institute of Acoustics and Vibrations, Vol. 2. p. 1621-1628 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  1 Citation (Scopus)