Find Research outputs

Search results

• Conference contribution

  Optimal Passive Fault Tolerant Control of a High Redundancy Actuator

  Steffen, T., Michail, K., Dixon, R., Zolotas, A. & Goodall, R., 2009, Proceedings of the 7th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes. Escobet, T. (ed.). 8 ed. Elsevier, Vol. 42. p. 1234-1239 6 p. (IFAC Proceedings Volumes (IFAC-PapersOnline); vol. 42, no. 8).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  1 Citation (Scopus)

• Optimal Selection for Sensor Fault Tolerant Control of an EMS System via Loop-Shaping Robust Control

  Michail, K., Zolotas, A. C., Goodall, R. M. & Halikias, G., 12 Aug 2011, 2011 19th Mediterranean Conference on Control and Automation (MED). IEEE, p. 1112-1117 6 p. 5983065

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  4 Citations (Scopus)

• Optimal Sensor Placement and Measurement of Wind for Water Quality Studies in Urban Reservoirs

  Du, W., Xing, Z., Li, M., He, B., Chua, L. H. C. & Miao, H., 8 Jul 2014, Proceedings of the 13th International Symposium on Information Processing in Sensor Networks (Part of CPS Week): IPSN'14. IEEE, p. 167-178 12 p. 6846750

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  48 Citations (Scopus)

• Optimal Vaneless Diffuser Design For A High-End Centrifugal Compressor

  Ahmed, N., Asim, T. & Mishra, R., Sep 2018, 28th International Congress on Condition Monitoring and Diagnostic Engineering Management. p. 406-413 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Optimisation of a Lead Sulphate Settling Process

  Cregan, V. & Lee, W. T., 28 Nov 2018, Extended Abstracts Summer 2016: Slow-Fast Systems and Hysteresis: Theory and Applications. Korobeinikov, A. (ed.). 1st ed. Birkhauser Verlag Basel, p. 1-6 6 p. (Trends in Mathematics; vol. 10).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Optimisation of flat pad aerostatic bearings with the aid of finite element analysis

  Barrans, S. M. & Bhat, N., 2005, Laser Metrology and Machine Performance VII: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2005. Shore, P. (ed.). euspen, p. 392-401 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  3 Citations (Scopus)

• Optimisation of Grolishing Freeform Surfaces with Rigid and Semi-rigid Tools

  Yu, G., Wu, H. Y., Walker, D., Zheng, X., Li, H., Dunn, C. & Gray, C., 22 Jul 2016, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation II. Navarro, R. & Burge, J. H. (eds.). SPIE, Vol. 9912. 6 p. 99123Q. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 9912).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• Optimised sensor configuration for a Maglev suspension

  Michail, K., Zolotas, A. & Goodall, R. M., 2008, Proceedings of the 17th World Congress, International Federation of Automatic Control. 2 ed. Elsevier, Vol. 41. p. 8305-8310 6 p. (IFAC Proceedings Volumes (IFAC-PapersOnline); vol. 41, no. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  6 Citations (Scopus)

• Optimised Sensor Configurations with Reduced Order Controllers Applied to an EMS System

  Michail, K., Zhou, Y., Zolotas, A., Goodall, R. & Halikias, G., 20 Sep 2010, Proceedings of the 29th Chinese Control Conference. Chen, J. (ed.). IEEE, p. 3595-3600 6 p. 5573264

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• Optimised sensor selection for control and fault tolerance: Comparison and some new results

  Michail, K., Zolotas, A. & Goodall, R., 26 Sep 2013, 21st Mediterranean Conference on Control and Automation. Antsaklis, P., Valavanis, K., Tsourveloudis, N., Zingaretti, P. & Moreno, L. (eds.). IEEE, p. 60-65 6 p. 6608699

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Optimising Comfort in Rural Villages of SW China

  Pitts, A., Gao, Y. & Le, V., 19 Apr 2020, Proceedings of 11th Windsor Conference on Thermal Comfort: Resilient Comfort. Roaf, S., Nicol, F. & Finlayson, W. (eds.). Oxford: Ecohouse Initiative Ltd, p. 693-709 17 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  File

• Optimising Neutron Production from Compact Low Energy Accelerators

  Ratcliffe, N., Barlow, R., Bungau, A., Cywinski, R. & Edgecock, T. R., Jul 2012, IPAC 2012: International Particle Accelerator Conference 2012. Corbett, J. (ed.). Joint Accelerator Conferences Website (JACoW), p. 4154-4156 3 p. THPPR076

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  1 Citation (Scopus)

• Optimization-driven design of a 90° metasurface phase shifter at 60 GHz

  Cano, P. H. Z., Vassos, E., Zaharis, Z. D., Lazaridis, P., Yioultsis, T. V., Kantartzis, N. V. & Feresidis, A., 24 Aug 2022, 2022 IEEE International Black Sea Conference on Communications and Networking, BlackSeaCom 2022. Institute of Electrical and Electronics Engineers Inc., p. 26-29 4 p. 9858206

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Optimization of Log-Periodic Dipole Antenna with LTE Band Rejection

  Mistry, K., Lazaridis, P., Zaharis, Z., Xenos, T. D. & Glover, I., 24 May 2018, Loughborough Antennas & Propagation Conference (LAPC 2017). Institute of Electrical and Electronics Engineers Inc., 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  7 Citations (Scopus)

• Optimization of support stiffness at a railway crossing panel

  Grossoni, I., Bezin, Y. & Neves, S. G. M., 2016, Proceedings of the third international conference on railway technology: Research, development and maintenance. Civil-Comp Press, Vol. 110. (Civil-Comp Proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  2 Citations (Scopus)

• Optimization of surface determination strategies to enhance detection of unfused powder in metal additive manufactured components

  Tawfik, A., Bills, P., Blunt, L. & Racasan, R., 2018, Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing. American Society for Precision Engineering, ASPE, p. 281-285 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  2 Citations (Scopus)

• Optimizations for Query Index Updating in Finite Automaton Based XML Stream Filtering Systems

  Qin, Y., Sun, W., Yu, P. & Zhang, Z., 8 Aug 2008, Proceedings of 2008 IEEE 8th International Conference on Computer and Information Technology: (CIT 2008). Wu, Q., He, X., Nguyen, Q. V., Jia, W. & Huang, M. (eds.). IEEE, p. 509-514 6 p. 4594727

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Optimizing a Deformable Secondary Mirror for Adaptive Optics

  Bigelow, B. C., Bingham, R. G. & Walker, D. D., 31 May 1994, Adaptive Optics in Astronomy. Ealey, M. A. & Merkle, F. (eds.). SPIE, Vol. 2201. p. 800-810 11 p. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 2201).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Optimizing Overlap between Testing and Design in Engineering Product Development Processes

  Tahera, K., Eckert, C. & Earl, C., 2013, Smart Product Engineering: Proceedings of the 23rd CIRP Design Conference, Bochum, Germany, March 11th - 13th, 2013. Abramovici, M. & Stark, R. (eds.). Springer Heidelberg, p. 201-210 10 p. (Lecture Notes in Production Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Optimizing plans through analysis of action dependencies and independencies

  Chrpa, L., McCluskey, T. L. & Osborne, H., 2012, ICAPS 2012 - Proceedings of the 22nd International Conference on Automated Planning and Scheduling. p. 338-342 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  17 Citations (Scopus)

• Optimizing X-Ray Computed Tomography Settings for Dimensional Metrology Using 2D Image Analysis

  Chahid, M., Townsend, A., Liu, A., Bills, P., Sperling, P. & Racasan, R., 1 Sep 2020, Structural Integrity of Additive Manufactured Materials and Parts. Nima, S. & Mohsen, S. (eds.). ASTM International, p. 88-101 14 p. (ASTM Special Technical Publication; vol. STP 1631).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  2 Citations (Scopus)

• Optimum design of planar redundant cable-suspended robots for minimum time trajectory tracking

  Fahham, H. R. & Farid, M., 17 Dec 2010, ICCAS 2010 - International Conference on Control, Automation and Systems. IEEE, p. 2156-2163 8 p. 5670228

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  4 Citations (Scopus)

• Optimum look-up table for reduction of current harmonics in direct torque controlled dual three-phase permanent magnet brushless AC machine drives

  Hoang, K. D., Zhu, Z. Q. & Foster, M., 19 Jul 2012, 6th IET International Conference on Power Electronics, Machines and Drives, PEMD 2012. 592 CP ed. IET Conference Publications, 6 p. 6242032

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• Optimum reactor design for the phenol production

  Khodabakhshi, G. & Sayyar, M. H., 2007, Conference of the Computing and Systems Technology Division 2007, Held at the 2007 AIChE Spring National Meeting. AIChE, p. 15-22 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Order-Preserving Encryption Using Approximate Integer Common Divisors

  Dyer, J., Dyer, M. & Xu, J., 13 Sep 2017, Data Privacy Management, Cryptocurrencies and Blockchain Technology: ESORICS 2017 International Workshops, DPM 2017 and CBT 2017, Oslo, Norway, September 14-15, 2017, Proceedings. Garcia-Alfaro, J., Navarro-Arribas, G., Hartenstein, H. & Herrera-Joancomartí, J. (eds.). Springer Verlag, p. 257-274 18 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 10436 LNCS).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  10 Citations (Scopus)

• Organizing, Managing, Designing: Double meanings, doings and (new?) dilemmas

  Hearn, J., 17 Feb 2017, Dilemmas 2015 Papers from the 18th annual International Conference Dilemmas for Human Services: Organizing, Designing and Managing. Llinnaeus University, 9 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• Orthogonal Distance Fitting of Precision Freeform Surfaces Based on L₁ Norm

  Zhang, X., Jiang, X. & Scott, P. J., 1 Apr 2009, Advanced Mathematical and Computational Tools in Metrology and Testing VIII. Pavese, F., Bär, M., Forbes, A. B., Linares, J. M., Perruchet, C. & Zhang, N. F. (eds.). World Scientific Publishing Co., Vol. 78. p. 385-390 6 p. (Advances in Mathematics for Applied Sciences; vol. 78).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• Oscillating flow in a parallel-plate stack in a standing wave thermoacoustic resonator: PIV measurements within the entrance region

  Mao, X., Yu, Z. & Jaworski, A. J., 9 Apr 2007, Proceedings of the International Congress on Ultrasonics: Vienna, April 9-13. 4 p. 1564

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Oscillatory flow and heat transfer within parallel-plate heat exchangers of thermoacoustic systems

  Saat, F. A. Z. M. & Jaworski, A. J., 25 Nov 2013, Proceedings of the World Congress on Engineering 2013, WCE 2013. Vol. 3 LNECS. p. 1699-1704 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  3 Citations (Scopus)

• Outage analysis of causal cognitive radio channel

  Khan, F. A., Ratnarajah, T., Sellathurai, M. & Prakriya, S., 1 Dec 2009, Proceedings - 2009 1st UK-India International Workshop on Cognitive Wireless Systems, UKIWCWS 2009. 5749415

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• Outage analysis of cognitive Z-interference channel with two-path cognitive relaying

  Khan, F. A., Ratnarajah, T. & Prakriya, S., 3 Mar 2011, Proceedings - 2010 2nd UK-India-IDRC International Workshop on Cognitive Wireless Systems, UKIWCWS 2010. 5724234

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Outage Performance Analysis of Content Delivery in Multiple Devices to Single Device Communications

  Daghal, A. S., Zhu, H., Ahmed, Q. Z. & Pan, Y., 14 Nov 2017, 2017 IEEE 85th Vehicular Technology Conference, VTC Spring 2017 - Proceedings. Institute of Electrical and Electronics Engineers Inc., Vol. 2017-June. 5 p. 8108401

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  2 Citations (Scopus)

• Outage performance of causal cognitive radio Z-interference fading channel with cognitive relaying

  Khan, F. A., Ratnarajah, T. & Prakriya, S., 2 Sep 2010, 2010 International Conference on Signal Processing and Communications, SPCOM 2010. 5560508

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  2 Citations (Scopus)

• Outage performance of cognitive radio wireless network with secondary relaying

  Khan, F. A., Ratnarajah, T. & Ding, Z., 7 Feb 2013, 2012 International Conference on Computer Systems and Industrial Informatics, ICCSII 2012. 6454571

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  2 Citations (Scopus)

• Outage Probability Analysis of Shared UE-Side Distributed Antenna System Based Cooperative AF Relaying Network for 5G Systems

  Singya, P. K., Kumar, N., Bhatia, V. & Khan, F. A., 16 Nov 2017, Proceedings of the 85th Vehicular Technology Conference, VTC Spring 2017 . IEEE, 6 p. 8108244. (IEEE Vehicular Technology Conference; vol. 2017-June).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Outlines and Outliers: A mix-method study of garment silhouette and the ageing body shape

  Zhang, M., Gill, S. & Andrew, S., 1 Nov 2021, 91st Textile Institute World Conference 2018: Integrating Design with Sustainable Technology. Curran Associates, Inc, Vol. 1. p. 605-617 13 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Overcoming Terminological Barriers in Nursing

  Hardiker, N. & Kirby, J., 1996, Medical Informatics Europe ’96: Human Facets in Information Technologies. Brender, J., Christensen, J. P., Scherrer, J. R. & McNair, P. (eds.). IOS Press, Vol. 34. p. 227 - 231 5 p. (Studies in Health Technology and Informatics).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  2 Citations (Scopus)

• Overcoming the Utility Problem in Heuristic Generation: Why Time Matters

  Barley, M. W., Franco, S. & Riddle, P. J., 10 May 2014, Proceedings of the Twenty-Fourth International Conference on Automated Planning and Scheduling. Chien, S., Fern, A. & Ruml, W. (eds.). AAAI press, p. 38-46 9 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  11 Citations (Scopus)

• Overheating Risks and Impacts on Occupant Well-Being of Covid Lock-down in UK Apartment Blocks

  Pitts, A. & Gao, Y., 23 Jun 2022, Proceedings of Comfort At The Extremes Conference Proceeding: CATE'21. Al-Hashim, A., Al-Saadi, S. & Al-Khatri, H. (eds.). Sultan Qaboos University, p. 72-79 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  File

• Overlapping clustering: A review

  Baadel, S., Thabtah, F. & Lu, J., 1 Sep 2016, Proceedings of 2016 SAI Computing Conference. Institute of Electrical and Electronics Engineers Inc., p. 233-237 5 p. 7555988

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  24 Citations (Scopus)

• Overview of Solid Target Studies for a Neutrino Factory

  Edgecock, T. R., Bennett, J. R. J., Brooks, S., Škoro, G. P., Booth, C. N. & Back, J. J., Jun 2010, IPAC 2010: Proceedings of the 1st International Particle Accelerator Conference. Noda, A., Petit-Jean-Genaz, C., Schaa, V. R. W., Shirai, T. & Shirakawa, A. (eds.). Joint Accelerator Conferences Website (JACoW), p. 4263-4265 3 p. THPEC089

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• Overview of the CLEF 2016 Cultural Micro-Blog Contextualization Workshop

  Murtagh, F., Goeuriot, L., Mothe, J., Mulhem, P. & SanJuan, E., 23 Aug 2016, Experimental IR Meets Multilinguality, Multimodality, and Interaction - 7th International Conference of the CLEF Association, CLEF 2016, Proceedings. Springer Verlag, p. 371-378 8 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 9822 LNCS).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  18 Citations (Scopus)

• Padovan Sequence Based Backoff Algorithm for Improved Wireless Medium Access in MANETs

  Moad, D., Djahel, S. & Nait-Abdesselam, F., 23 Oct 2014, 2014 Global Information Infrastructure and Networking Symposium, GIIS 2014. Institute of Electrical and Electronics Engineers Inc., 6 p. 6934267. (Global Information Infrastructure and Networking Symposium, GIIS).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  6 Citations (Scopus)

• PAMELA - A model for an FFAG based hadron therapy machine

  Peach, K., Cobb, J., Yokoi, T., Gardner, I., Edgecock, R., Poole, M., Pozimski, J., Cywinski, B., Jones, B., McKenna, G., Vojnovic, B., Folkard, M., Kirkby, K., Webb, R., Barlow, R. & Elliott, A., 29 Jun 2007, Proceedings of the IEEE Particle Accelerator Conference, PAC07. Institute of Electrical and Electronics Engineers Inc., p. 2880-2882 3 p. 4440607. (IEEE Particle Accelerator Conference; vol. 2007).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  5 Citations (Scopus)

• PAMELA Overview and Status

  Peach, K. J., Cobb, J. H., Sheehy, S. L., Witte, H., Yokoi, T., Fenning, R., Khan, A., Seviour, R., Johnstone, C., Hill, M., Jones, B., Vojnovic, B., Aslaninejad, M., Easton, M., Pasternak, J., Pozimski, J. K., Beard, C., Bliss, N., Jones, T., McIntosh, P., & 11 othersPattalwar, S., Smith, S. L., Strachan, J., Tzenov, S., Edgecock, T. R., Gardner, I. S. K., Kelliher, D., Machida, S., Barlow, R. J., Owen, H. & Tygier, S., Jun 2010, IPAC 2010 : Proceedings of the 1st International Particle Accelerator Conference. Noda, A., Petit-Jean-Genaz, C., Schaa, V., Shirai, T. & Shirakawa, A. (eds.). Joint Accelerator Conferences Website (JACoW), p. 112-114 3 p. MOPEA021

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  9 Citations (Scopus)

• Pantograph-catenary interaction in curved railway tracks

  Ambrosio, J., Antunes, P., Pombo, J. & Facchinetti, A., 22 Aug 2019, Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications - Proceedings of the 7th International Conference on Structural Engineering, Mechanics and Computation, 2019. Zingoni, A. (ed.). 1 ed. CRC Press, p. 1791-1798 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Parameter Estimation of Railway Vehicle Dynamic Model Using Rao-Blackwellised Particle Filter

  Li, P., Goodall, R. & Kadirkamanathan, V., 2003, European Control Conference, ECC 2003. IEEE, p. 2384-2389 6 p. 7085323

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  42 Citations (Scopus)

• Parametric analysis of membrane-based absorbers at air-cooling thermal conditions

  Asfand, F. & Bourouis, M., 1 Jun 2019, ECOS 2019: Proceedings of the 32nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems. Stanek, W., Gladysz, P., Werle, S. & Adamczyk, W. (eds.). Institute of Thermal Technology, Vol. 2019-June. p. 3917-3930 14 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Parametrized Approximation Estimators for Mixed Noise Distributions

  Jenkinson, D. P., Mason, J. C., Crampton, A., Cox, M. G., Forbes, A. B. & Boudjemaa, R., 1 Jul 2004, Advanced Mathematical and Computational Tools in Metrology VI. Ciarlini, P., Cox, M. G., Pavese, F. & Rossi, G. B. (eds.). World Scientific, Vol. 66. p. 67-81 15 p. (Advances in Mathematics for Applied Sciences; vol. 66).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Parasitic Rotor Losses in a Brushless Permanent Magnet Traction Machine

  Schofield, N., Ng, K., Zhu, Z. Q. & Howe, D., 1 Sep 1997, Eighth International Conference on Electrical Machines and Drives. Institution of Engineering and Technology, Vol. 444. p. 200-204 5 p. 677114. (IEE Conference Publication; vol. 444).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  35 Citations (Scopus)