Find Research outputs

Search results

• Conference contribution

  The application of optics polishing to free form knee implants

  Blunt, L., Charlton, P., Beaucamp, A. & Jiang, X., 2006, Proceedings of the 6th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2006. Zervos, H. (ed.). euspen, Vol. 2. p. 188-191 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  5 Citations (Scopus)

• The Application of Synthetic Jet Actuators for the Modification of the Characteristics of Separated Shear Layers

  Watson, M., Jaworski, A. J. & Wood, N. J., 19 Jul 2004, ASME 7th Biennial Conference on Engineering Systems Design and Analysis. American Society of Mechanical Engineers (ASME), Vol. 1. p. 959-968 10 p. ESDA2004-58561

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• The Application of Taguchi Approach to Optimise the Processing Conditions on Bonnet Polishing of CoCr

  Blunt, L., Jiang, X. & Zeng, S., 18 Jan 2012, Precision Machining VI. p. 235-240 6 p. (Key Engineering Materials; vol. 496).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  6 Citations (Scopus)

• The boundary layer velocity measurements in a high-amplitude standing wave thermoacoustic stack

  Mao, X., Jaworski, A. J. & Shi, L., 21 Aug 2007, Proceedings of the 22nd IIR International Congress of Refrigeration (ICR 2007). 8 p. ICR07-A1-281

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• The carrier dynamical issues for extending the operating wavelength of quantum cascade lasers into the Terahertz regime

  Harrison, P., Donovan, K. & Kelsall, R. W., 6 Aug 2002, Proceedings of 12th IEEE Lasers and Electro-Optics Society Annual Meeting: LEOS 1999. IEEE, Vol. 2. p. 578-579 2 p. 811859. (Conference Proceedings - Lasers and Electro-Optics Society Annual Meeting-LEOS; vol. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• The Challenges and Obstacles of Post-Disaster Road Infrastructure Reconstruction in the Pre-Construction Phase

  Hayat, E., Amaratunga, D. & Malalgoda, C., 5 Jan 2016, 6th International Conference on Structural Engineering and Construction Management. p. 47-57 11 p. SECM/15/082

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  File

• The challenges in edge detection and porosity analysis for dissimilar materials additive manufactured components

  Tawfik, A., Racasan, R., Bacheva, D., Blunt, L. & Bills, P., 2019, European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 19th International Conference and Exhibition, EUSPEN 2019. Leach, R. K., Billington, D., Nisbet, C. & Phillips, D. (eds.). euspen, p. 350-351 2 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  1 Citation (Scopus)

• The challenges of managing stakeholder requirements in a urban regeneration project

  Tillmann, P. A., Tzortzopoulos, P., Miron, L. I. G. & Formoso, C. T., 2011, 19th Annual Conference of the International Group for Lean Construction 2011, IGLC 2011. p. 362-371 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  1 Citation (Scopus)

• The Chthonolpolis: Labyrinths and Dream Spaces

  Clear, N., 21 Apr 2017, Future Cities: The Marvellous Conference Catalogue. Spiller, N. & Clear, N. (eds.). University of Greenwich, p. 17-21 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• The condition monitoring of diesel engines using acoustic measurements part 2: Fault detection and diagnosis

  Ball, A. D., Gu, F. & Li, W., 2000, SAE 2000 World Congress.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  27 Citations (Scopus)

• The CONFORM project: Construction of a nonscaling FFAG and its applications

  Barlow, R. J., Pozimski, J. K., Peach, K., Bliss, N., Marks, N., Owen, H., Poole, M. W. & Edgecock, T. R., Aug 2007, Proceedings of the IEEE Particle Accelerator Conference, PAC07. Petit-Jean-Genaz, C. (ed.). IEEE, p. 2886-2888 3 p. 4440609. (IEEE Particle Accelerator Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  8 Citations (Scopus)

• The consequences of post conflict reconstruction: a review of literature

  Sakalasuriya, M., Haigh, R. & Amaratunga, D., Aug 2016, 12th International Conference of the International Institute for Infrastructure Resilience and Reconstruction (IIIRR). Kandy, Sri Lanka, p. 153-159 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  File

• The construction of a corpus to investigate the presentation of speech, thought and writing in written and spoken British English

  McIntyre, D., Bellard-Thompson, C., Heywood, J., McEnery, T., Semino, E. & Short, M., 2003, Proceedings of the Corpus Linguistics 2003 conference. Archer, D., Rayson, P., Wilson, A. & McEnery, T. (eds.). Vol. 16. p. 513-522 10 p. (UCREL Technical Papers).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• The Contributions of Computer Music Pioneer Knut Wiggen

  Rudi, J., 5 Aug 2018, ICMC 2018 - Proceedings of the 2018 International Computer Music Conference. International Computer Music Association, p. 178-181 4 p. (Proceedings of the International Computer Music Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• The Creation of Radiation Dominated Plasmas Using Laboratory X-Ray Lasers

  Tallents, G. J., Wilson, S., Aslanyan, V., West, A., Rossall, A. K., Menoni, C. S. & Rocca, J. J., 24 Feb 2018, X-Ray Lasers 2016: Proceedings of the 15th International Conference on X-Ray Lasers. Kawachi, T., Bulanov, S. V., Daido, H. & Kato, Y. (eds.). Springer, Cham, Vol. 202. p. 37-43 7 p. (Springer Proceedings in Physics; vol. 202).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  File

• The Cross-Correlation Between Acoustics and Vibrations from a Multi-Stage Gearbox

  Borisov, A., Gelman, L., Gryllias, K., Petrunin, I., Nze, I. & Yebra, G., 2011, 8th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2011, CM 2011/MFPT 2011. British Institute of Non-Destructive Testing, Vol. 1. p. 978-992 15 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• The dependence of frequency and field on stochastic ordering in photonic band gap resonant structures

  Matthews, C. J. & Seviour, R., 2009, IET Conference on High Power RF Technologies. CP548 ed. Institution of Engineering and Technology, 3 p. 5

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• The Design, Development and Evaluation of Virtual Reality Learning Environment for Numeracy Concepts Using 3D Virtual Manipulatives

  Daghestani, L., Ward, R. D., Xu, Z. & Al-Nuaim, H., 19 Sep 2008, Proceedings of the 5th International Conference on Computer Graphics, Imaging and Visualisation: Modern Techniques and Applications. Sarfraz, M., Banissi, E. & Jeng, W. C. (eds.). IEEE Computer Society, p. 93-100 8 p. 4626990

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  7 Citations (Scopus)

• The Design and Creation of Tactile Knitted E-textiles for Interactive Applications

  Chen, A., 9 Feb 2020, TEI 2020: Proceedings of the 14th International Conference on Tangible, Embedded, and Embodied Interaction. Association for Computing Machinery, Inc, p. 905-909 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  4 Citations (Scopus)

• The design and use of an explosion metrology system

  Horler, G., McGorman, D., Birch, J. & Curry, N., 2009, Proceedings - 2009 IMAPS International Conference on High Temperature Electronics Network, HiTEN 2009. IMAPS-International Microelectronics and Packaging Society, p. 131-135 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• The Designing and Implementation of a Smart Home System with Wireless Sensor/Actuator and Smartphone

  Lu, Z. & Ghabar, O., 20 Jul 2014, INFOCOMP 2014 : The Fourth International Conference on Advanced Communications and Computation. Paris, France: International Academy, Research, and Industry Association (IARIA), p. 56-64 9 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

• The Design of Inductively Coupled Plasma Jet Processing System for High Power Laser Optics

  Li, D., Wang, B. & Jiang, X. J., 1 Mar 2015, Laser Metrology and Machine Performance XI: 11 International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance. Blunt, L. & Hansen, H. N. (eds.). Cranfield: euspen, p. 390-397 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• The detection of shaft misalignments using motor current signals from a sensorless variable speed drive

  Benghozzi, A., Smith, A., Gu, F. & Ball, A., 2015, Vibration Engineering and Technology of Machinery - Proceedings of VETOMAC X, 2014. Kluwer Academic Publishers, Vol. 23. p. 173-182 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• The development and use of T2GGM: A gas modelling code for the postclosure safety assessment of OPG's proposed L&ILW deep geologic repository, Canada

  Suckling, P., Calder, N., Humphreys, P., King, F. & Leung, H., 2009, ASME 2009 12th International Conference on Environmental Remediation and Radioactive Waste Management, ICEM2009. Vol. 1. p. 29-38 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• The Development and Validation of Multi-axial Creep Damage Constitutive Equations for P91

  Xu, Q., Wright, M. & Xu, Q., 21 Nov 2011, Proceedings of 2011 17th International Conference on Automation & Computing: ICAC 2011. Chen, W., Chen, X. & Xu, Z. (eds.). IEEE, p. 177-182 6 p. 6084923

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  4 Citations (Scopus)

• The Development and Validation of the Creep Damage Constitutive Equations for P91 Alloy

  Yang, X., Xu, Q. & Lou, Z., 1 May 2015, Scientific Computing. Arabnia, H. R., Gravvanis, G. A., Jandieri, G., Solo, A. M. G. & Tinetti, F. G. (eds.). CSREA Press, p. 121-127 7 p. (The 2013 WorldComp International Conference Series).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• The development of advanced creep constitutive equations for high chromium steel P91 at low stress range

  An, L., Xu, Q. & Lou, Z., 2013, 6th International “HIDA” Conference: Life/Defect Assessment & Failures in High Temperature Plant. Shibli, A. (ed.). ETD Ltd, UK, Poster Paper 6

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

• The development of an evaluation framework based on the design science approach

  Brady, D. A., Tzortzopoulos, P. & Rooke, J., 2013, 21st Annual Conference of the International Group for Lean Construction 2013, IGLC 2013. The International Group for Lean Construction, p. 516-525 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  5 Citations (Scopus)

• The Development of a RFID-based Smart Pipeline Tracking and Information Management System

  Ji, W., Chen, M., Davies, J., Xu, Z., Wang, B. & Sun, K., 1 Jul 2019, 2018 24th IEEE International Conference on Automation and Computing (ICAC 2018): Improving Productivity through Automation and Computing. Ma, X. (ed.). Institute of Electrical and Electronics Engineers Inc., 6 p. 8748958

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  2 Citations (Scopus)

• The Development of a Social Survey Questionnaire for the Investigation of Human Response to Vibration in Residential Environment

  Condie, J., Whittle, N., Brown, P. & Waddington, D., 1 Mar 2010, 8th European Conference on Noise Control 2009 (EURONOISE 2009) . PART 3 ed. Vol. 6. p. 3371-3380 10 p. (8th European Conference on Noise Control 2009, EURONOISE 2009 - Proceedings of the Institute of Acoustics; vol. 31, no. PART 3).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  3 Citations (Scopus)

• The development of computational FE system for creep damage analysis of weldment

  Tan, F., Xu, Q., Lou, Z. & Barrans, S., 2013, 6th International ‘HIDA’ Conference: Life/Defect Assessment & Failures in High Temperature Plant. Shibli, A. (ed.). ETD Ltd, UK

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

• The development of creep damage constitutive equations for low Cr-Mo alloy steel and its weldment at low stress

  Xu, Q., Xu, Q. & Lou, Z., 2013, 6th International ‘HIDA’ Conference: Life/Defect Assessment & Failures in High Temperature Plant. Shibli, A. (ed.). ETD Ltd, UK

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

• The Development of Finite Element Analysis Software for Creep Damage Analysis

  Liu, D., Xu, Q., Lou, Z., Xu, D. & Tan, F., 1 May 2015, Scientific Computing. Arabnia, H. R., Gravvanis, G. A., Jandieri, G., Solo, A. M. G. & Tinetti, F. G. (eds.). CSREA Press, 5 p. (The 2013 WorldComp International Conference proceedings).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• The development of finite element software for creep deformation and damage analysis of weldment

  Liu, D., Xu, Q., Lu, J. & Barrans, S., 2013, 6th International ‘HIDA’ Conference: Life/Defect Assessment & Failures in High Temperature Plant. Shibli, A. (ed.). ETD Ltd, UK

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

• The development of measurement protocol for characterisation of ultra smooth surfaces

  Brown, L. & Blunt, L., 2006, Proceedings of the 6th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2006. Zervos, H. (ed.). euspen, Vol. 1. p. 516-519 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• The Development of Multi-Axial Creep Damage Constitutive Equations for 0.5 Cr0. 5Mo0. 25V Ferretic Steel at 590℃

  Xu, Q., 3 Jun 2001, Proceedings of the 7th international conference on creep and fatigue at elevated temperatures: CREEP 7. Japan Society of Mechanical Engineers, p. 571-577 7 p. SA-11-3(047

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

• The development of phenomenological multi-axial isotropic creep damage constitutive equations

  Xu, Q., Aug 2001, Mechanics and Material Engineering for Science and Experiments: Proceedings of International Symposium of Young Scholars on Mechanics and Material Engineering for Science and Experiments. Zhou, Y., Gu, Y. & Li, Z. (eds.). London: Science Press, p. 457-460 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• The development of synthetic jets for enhanced control of separated flows

  Watson, M., Jaworski, A. J. & Wood, N. J., 1 Dec 2003, 33rd AIAA Fluid Dynamics Conference and Exhibit.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  2 Citations (Scopus)

• The Development of the Course Experience Questionnaire and Revised-Study Process Questionnaire for Part-Time Learners on Blended, Vocationally Relevant, Degree Programmes

  Youde, A., 2019, EduLearn19: 11th International Conference on Education and New Learning Technologies Proceedings. p. 10-17 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  File

• The diagnosis of a gearbox transmission system using electrical control parameters

  Benghozzi, A., Shao, Y., Shi, Z., Gu, F. & Ball, A. D., 2012, ICAC 12 - Proceedings of the 18th International Conference on Automation and Computing: Integration of Design and Engineering. p. 274-279 6 p. 6330496

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  1 Citation (Scopus)

• The different effects of thinking aloud and writing on graph comprehension

  Ali, N. & Peebles, D., 2011, Expanding the Space of Cognitive Science: Proceedings of the 33rd Annual Meeting of the Cognitive Science Society. Carlson, L., Hoelscher, C. & Shipley, T. F. (eds.). The Cognitive Science Society, Vol. 33. p. 3143-3148 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  6 Citations (Scopus)

• The DR-Prolog tool suite for defeasible reasoning and proof explanation in the Semantic Web

  Bikakis, A., Papatheodorou, C. & Antoniou, G., 10 Nov 2008, Artificial Intelligence: Theories, Models and Applications - 5th Hellenic Conference on AI, SETN 2008, Proceedings. p. 345-351 7 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 5138 LNAI).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  4 Citations (Scopus)

• The dual nature of design management

  Koskela, L., Pikas, E., Tredal, N., Knotten, V. & Bølviken, T., Jul 2018, IGLC 2018 - Proceedings of the 26th Annual Conference of the International Group for Lean Construction: Evolving Lean Construction Towards Mature Production Management Across Cultures and Frontiers. Gonzalez, V. A. (ed.). The International Group for Lean Construction, Vol. 1. p. 647-657 11 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• The dyeing of nonwovens: An examination of the adsorption behaviour of hydroentangled fabrics

  Hewitt, A. D., Blackburn, R. S. & Russell, S. J., 1 Dec 2006, International Nonwovens Technical Conference, INTC 2006. p. 673-683 11 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• The Early Classical Recordings of First World War England: Process, preoccupation and performance

  Stanovic, I., 1 Jan 2020, The Great War (1914-1918) and Music: Compositional Strategies, Performing Practices, and Social Impacts. Tuksar, S. & Janjik, M. J. (eds.). Croatian Musicological Society, p. 103-112 10 p. (Musicological Proceedings; no. 21).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• The Earnings Expectations of Business Economics Students in the Czech Republic and England: the effect of seniority

  Benesova, M. & Anchor, J., 2 Sep 2019, Proceedings of the 14th International Conference: Liberec Economic Forum 2019. Antlová, K. & Semerádová, T. (eds.). Liberec: Technical University of Liberec, p. 72-80 9 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• The Economic Theory of Production Conceals Opportunities for Sustainability Improvement

  Koskela, L. & Tommelein, I. D., 1 Dec 2009, Proceedings for the 17th Annual Conference of the International Group for Lean Construction. Cuperus, Y. & Hirota, E. H. (eds.). The International Group for Lean Construction, p. 295-304 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  11 Citations (Scopus)

• The effective blended tutor: supporting adult learners studying part-time, vocationally relevant degrees at a distance

  Youde, A., 9 Mar 2016, INTED 2016 Proceedings. Gómez Chova, L., López Martínez, A. & Candel Torres, I. (eds.). IATED Academy, p. 1589-1598 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• The effectiveness of Design Thinking techniques to enhance undergraduate student learning

  Ritchie, J., Tinker, A. & Power, E., 10 Oct 2016, Futurescan 3: Intersecting Identities. Britt, H., Morgan, L. & Walton, K. (eds.). p. 10-20 11 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• The effect of a vertical reflection on the relationship between preference and perceived change in timbral and spatial attributes

  Robotham, T., Stephenson, M. & Lee, H., 26 May 2016, 140th Audio Engineering Society International Convention 2016, AES 2016. Audio Engineering Society, 9547

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  4 Citations (Scopus)