Find Research outputs

Search results

• Conference contribution

  Investigation of a rotating shaft with a novel integrated wireless accelerometer

  Arebi, L., Gu, J., Ball, A. & Gu, F., 22 Jun 2010, 7th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2010, CM 2010/MFPT 2010. British Institute of Non-Destructive Testing, Vol. 1. p. 186-196 11 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• Investigation of a scale-up manufacturing approach for nanostructures using multi-tip nanoscale diamond tool

  Tong, Z., Luo, X. & Sun, J., 2014, Proceedings of the 14th International Conference of the European Society for Precision Engineering and Nanotechnology. Vol. 2. p. 347-350 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Investigation of bubble behaviour in a gas-solid fluidized bed by means of a twin-plane ECT sensor

  Li, X., Jaworski, AJ. & Mao, X., 2016, Proceedings of the 8th World Congress on Industrial Process Tomography, (Iguassu Falls, Brazil: 26-29 September 2016). International Society for Industrial Process Tomography, B4. (World Congress on Industrial Process Tomography).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Investigation of Combined Effect of Pulse Electric Field and Transforming Growth Factor Beta-3 (TGF-B3) on Proliferation and Spreading of the Human Colon Adenocarcinoma HT29 Cell Line

  Mamman, H. B., Jamil, M. M. A., Rahman, N. A. A., Youseffi, M., Ghazali, N. & Javid, F., 17 Mar 2021, Proceeding - 2021 IEEE 17th International Colloquium on Signal Processing and Its Applications, CSPA 2021. Institute of Electrical and Electronics Engineers Inc., p. 6-11 6 p. 9377291

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Investigation of Embroidery Conductive Layer Dyed with Graphene and ZnO

  Bao, L. N. Q., Ooi, P. C., Chin, J. K. & Pu, C. C., 29 Jan 2015, 2014 International Symposium on Antennas and Propagation Conference Proceedings. Institute of Electrical and Electronics Engineers Inc., Vol. 1. p. 515-516 2 p. 7026752

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Investigation of Heterogeneous Mixtures With Dual-Modality Transducers Fabricated Using Thick-Film Technology

  Meng, G., Jaworski, A. J., Dyakowski, T., Hale, J. M. & White, N. M., 19 Jul 2004, ASME 7th Biennial Conference on Engineering Systems Design and Analysis. American Society of Mechanical Engineers (ASME), Vol. 1. p. 969-977 9 p. ESDA2004-58570

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Investigation of IT Security and Compliance Challenges in Security-as-a-Service for Cloud Computing

  Al-Aqrabi, H., Liu, L., Xu, J., Hill, R., Antonopoulos, N. & Zhan, Y., 10 May 2012, 2012 15th IEEE International Symposium on Object/Component/Service-Oriented Real-Time Distributed Computing Workshops (ISORCW). Institute of Electrical and Electronics Engineers Inc., p. 124-129 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  33 Citations (Scopus)

• Investigation of Kalman Filter Divergence using Robust Stability Techniques

  Pearson, J., Goodall, R., Eastham, M. & MacLeod, C., 1997, Proceedings of the 36th IEEE Conference on Decision and Control. IEEE, Vol. 5. p. 4892-4893 2 p. (IEEE Conference on Decision and Control).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  8 Citations (Scopus)

• Investigation of kinematics error influence on on-machine measurement for ultra-precision turning

  Li, D., Tong, Z., Blunt, L., Ding, F. & Jiang, X., 5 Jun 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN): June 4th-8th 2018, Venice, IT. Riemer, O., Savio, E., Billington, D., Leach, R. K. & Phillips, D. (eds.). euspen, p. 143-144 2 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• Investigation of Motor Current Signature Analysis in Detecting Unbalanced Motor Windings of an Induction Motor with Sensorless Vector Control Drive

  Lane, M., Ashari, D., Gu, F. & Ball, A. D., 15 Aug 2015, Vibration Engineering and Technology of Machinery: Proceedings of VETOMAC X 2014, held at the University of Manchester, UK, September 9-11, 2014. Sinha, J. K. (ed.). Cham: Springer Netherlands, p. 801-810 10 p. (Mechanisms and Machine Science; vol. 23).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  5 Citations (Scopus)

• Investigation of motor current signature analysis to detect motor resistance imbalances

  Lane, M., Ashari, D., Gu, F. & Ball, A. D., 2 Nov 2015, 2015 21st International Conference on Automation and Computing: Automation, Computing and Manufacturing for New Economic Growth, ICAC 2015. Institute of Electrical and Electronics Engineers Inc., 7313945

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• Investigation of Plastic Deformation of Sub-micropillars by a Multiscale Dislocation-Based Model

  Zhang, Z., Tong, Z. & Jiang, J., 16 Apr 2022, Proceedings of the 7th International Conference on NanoManufacturing (NanoMan2021). Yang, S., Luo, X., Yan, Y. & Jiang, Z. (eds.). Springer Singapore, Vol. 296. p. 208-217 10 p. (Smart Innovation, Systems and Technologies; vol. 296).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Investigation of polarization-sensitive optical coherence tomography towards the study of microstructure of articular cartilage

  Kasaragod, D., Lu, Z., Le Maitre, C., Wilkinson, J. M. & Matcher, S., 20 Mar 2013, Optical Coherence Tomography and Coherence Domain Optical Methods in Biomedicine XVII. Fujimoto, J. G., Izatt, J. A. & Tuchin, V. V. (eds.). SPIE, Vol. 8571. 6 p. 85712K. (Progress in Biomedical Optics and Imaging - Proceedings of SPIE; vol. 8571).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Investigation of Poultry Litter Conversion into Useful Energy Resources Using Fast Pyrolysis

  Simbolon, L. M., Pandey, D. S., Tsekos, C., Jong, W. D. & Tassou, S. A., 27 May 2019, Proceedings of the 27th Biomass Conference and Exhibition: EUBCE 2019. European Biomass Conference and Exhibition (EUBCE) , Vol. 2019. p. 1222-1226 5 p. (European Biomass Conference and Exhibition Proceedings; vol. 2019).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  2 Citations (Scopus)

• Investigation of reductions in motor efficiency caused by stator faults when operated from an inverter drive

  Lane, M., Shaeboub, A., Gu, F. & Ball, A. D., 24 Oct 2016, 22nd International Conference on Automation and Computing: Tackling the New Challenges in Automation and Computing. Institute of Electrical and Electronics Engineers Inc., p. 144-149 6 p. 7604909

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  1 Citation (Scopus)

• Investigation of Surface Topography at the End of Running-In Process

  Jiang, X. Q., Zhang, G. P., Liu, X. J. & Lu, W. L., 6 Nov 2013, Industrial Design and Mechanics Power II. p. 564-567 4 p. (Applied Mechanics and Materials; vol. 437).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Investigation of the cutting force coefficients in ball-end milling

  Liu, X. W., Cheng, K., Webb, D., Longstaff, A. P., Widiyarto, M. H., Jiang, X. Q., Blunt, L. & Ford, D. G., 1 Dec 2003, Laser Metrology and Machine Performance VI. Ford, D. G. (ed.). WIT Press, Vol. 44. p. 45-54 10 p. (Transactions on Engineering Sciences; vol. 44).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  3 Citations (Scopus)

• Investigation of the effect of biodiesel blends on fuel injection pumps based on vibration and pressure measurements

  Abruss, A., Guo, Y., Wang, T., Gu, F., Ball, A. D. & Brown, D., 2015, Vibration Engineering and Technology of Machinery - Proceedings of VETOMAC X, 2014. Kluwer Academic Publishers, Vol. 23. p. 535-546 12 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Investigation of visual management cases in construction by an analytical framework from manufacturing

  Murata, K., Nakajima, K., Kinoshita, K., Tezel, A., Koskela, L., Tzortzopoulos, P. & Katayama, H., 2015, Proceedings - CIE 45: 2015 International Conference on Computers and Industrial Engineering. Universite de Lorraine

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  3 Citations (Scopus)

• Investigation of wireless sensor deployed on a rotating shaft and its potential for machinery condition monitoring

  Arebi, L., Fan, Y., Gu, F. & Ball, A., 10 Sep 2010, COMADEM 2010 - Advances in Maintenance and Condition Diagnosis Technologies Towards Sustainable Society, Proc. 23rd Int. Congr. Condition Monitoring and Diagnostic Engineering Management. p. 627-635 9 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  4 Citations (Scopus)

• Investigation on moisture and salt transport in heterogeneous porous media of Relics-Soil in archaeology museum

  Luo, X. L., Gu, Z. L., Chai, J., Meng, X. Z., Lu, Z. & Zhu, B. X., 2014, Heat Transfer and Thermal Engineering: ASME Proceedings. American Society of Mechanical Engineers (ASME), Vol. 8A. 6 p. IMECE2014-39488

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Investigation on the phantom image elevation effect

  Lee, H., 2015, 139th Audio Engineering Society International Convention, AES 2015. Audio Engineering Society

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  10 Citations (Scopus)

• Investigation on thermomechanical properties of poly (l-lactic acid) for the stretch blow moulding process of bioresorbable vascular scaffold

  Wei, H. & Menary, G., 16 Oct 2017, 20th International ESAFORM Conference on Material Forming: ESAFORM 2017. American Institute of Physics Inc., 060002. (AIP Conference Proceedings; vol. 1896).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Investigations of flow instabilities within the dense phase pneumatic conveying system

  Jaworski, A. J. & Dyakowski, T., 27 May 2001, Proceedings of the 4th International Conference on Multiphase Flow: 27 May – 1 June, 2001, New Orleans, Louisiana, USA. Elsevier, 7 p. 846

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Investigations of flow morphology around thermoacoustic parallel-plate stacks and heat exchangers

  Mao, X., Shi, L., Yu, Z. & Jaworski, A. J., 1 Dec 2009, Society for Experimental Mechanics - SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2009. Vol. 2. p. 1182-1189 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  2 Citations (Scopus)

• Investigations on Augmented Reality based maintenance practices within SMEs

  Mueller, M., Stegelmeyer, D. & Mishra, R., 1 Nov 2018, Proceedings of the 31st International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management: COMADEM 2018. Heyns, P. S., van Vuuren, P. A., van Schoor, G. & Rao, R. B. K. N. (eds.). COMADEM International, p. 173-180 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• In vitro experimental investigation of the integrity of the stem-cement interface

  Zhang, H., Fleming, L. & Blunt, L., Jan 2013, Biomaterial and Bioengineering: Advanced Materials Research. Wang, T. (ed.). Vol. 647. p. 53-56 4 p. (Advanced Materials Research; vol. 647).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• IOWA & Cross-ratio Uninorm operators as aggregation tools in sentiment analysis and ensemble methods

  Appel, O., Chiclana, F., Carter, J. & Fujita, H., 24 Aug 2017, 2017 IEEE International Conference on Fuzzy Systems (FUZZ-IEEE). IEEE, 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  1 Citation (Scopus)

• iPlug 2: Desktop Plug-in Framework Meets Web Audio Modules

  Larkin, O., Harker, A. & Kleimola, J., 19 Sep 2018, 4th Web Audio Conference: WAC '18. TU Berlin, 6 p. 13. (Proceedings of ... Web Audio Conference; vol. 2018).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• Ironless Machine Design and Novel Digital Control for Automotive Applications

  Stamenkovic, I., Milivojevic, N., Krishnamurthy, M., Schofield, N. & Emadi, A., 20 Oct 2009, 5th IEEE Vehicle Power and Propulsion Conference, VPPC '09. IEEE, p. 475-480 6 p. 5289811. (IEEE Vehicle Power and Propulsion Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  2 Citations (Scopus)

• Is Agile Project Management Applicable to Construction?

  Owen, R., Koskela, L., Henrich, G. & Codinhoto, R., 25 Jul 2006, Proceedings of the 14th Annual Conference of the International Group for Lean Construction (IGLC14). Sacks, R. & Bertelsen, S. (eds.). The International Group for Lean Construction, p. 51-66 16 p. (Proceedings of the Annual Conference of the International Group for Lean Construction; vol. 2006).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  61 Citations (Scopus)

• ISO definition of resolution for surface topography measuring instruments

  Leach, R., Giusca, C., Henning, A., Sherlock, B. & Coupland, J., 1 Jan 2014, Fringe 2013 : 7th International Workshop on Advanced Optical Imaging and Metrology. Osten, W. (ed.). Springer Berlin, p. 405-410 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  8 Citations (Scopus)

• IT, process and people integration for healthcare delivery in the built and human environment

  Kagioglou, M., Aouad, G. & Sexton, M., 1 Dec 2003, Concurrent Engineering: Enhanced Interoperable Systems. Jardim -Goncalves, R., Cha, J. & Steiger-Garcao, A. (eds.). 1 ed. Lisse: Swets en Zeitlinger B.V., p. 881-885 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Iterative Sustainability Impact Assessment: When to propose?

  Penzenstadler, B., Betz, S., Duboc, L., Seyff, N., Porras, J., Oyedeji, S., Brooks, I. & Venters, C. C., 7 Jul 2021, 2021 IEEE/ACM International Workshop on Body of Knowledge for Software Sustainability (BoKSS). O'Conner, L. (ed.). IEEE, p. 5-6 2 p. 9470767

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Iterative Width Search for Multi Agent Privacy-Preserving Planning

  Bazzotti, G., Gerevini, A. E., Lipovetzky, N., Percassi, F., Saetti, A. & Serina, I., 9 Nov 2018, AI*IA 2018 – Advances in Artificial Intelligence : 17th International Conference of the Italian Association for Artificial Intelligence, Proceedings. Ghidini, C., Traverso, P., Magnini, B. & Passerini, A. (eds.). 1st ed. Cham: Springer Nature Switzerland AG, Vol. LNAI 11298. p. 431-444 14 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 11298 LNAI).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• I think I now know

  Hunter, R., 2011, Artistic Research in Action: Proceedings of the Colloquium on Artistic Research in Performing Arts 2. Arlander, A. (ed.). Helsinki: The University of the Arts Helsinki (Uniarts Helsinki), p. 23-47 24 p. (Theatre Academy Helsinki; vol. 42).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• IWO-based synthesis of log-periodic dipole array

  Zaharis, Z. D., Skeberis, C., Xenos, T. D., Lazaridis, P. I. & Stratakis, D. I., 7 Oct 2014, 2014 International Conference on Telecommunications and Multimedia, TEMU 2014. Institute of Electrical and Electronics Engineers Inc., p. 150-154 5 p. 6917752

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  12 Citations (Scopus)

• Jam with Jamendo: Querying a Large Music Collection by Chords from a Learner's Perspective

  Xambó, A., Pauwels, J., Roma, G., Barthet, M. & Fazekas, G., 12 Sep 2018, AM'18: Proceedings of the Audio Mostly 2018 on Sound in Immersion and Emotion. Association for Computing Machinery (ACM), 7 p. a30. (ACM International Conference Proceeding Series).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  5 Citations (Scopus)

• jArgSemSAT: An Efficient Off-The-Shelf Solver for Abstract Argumentation Frameworks

  Cerutti, F., Vallati, M. & Giacomin, M., 2016, Proceedings of the 15th International Conference on Principles of Knowledge Representation and Reasoning. AAAI press, p. 541-544 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  6 Citations (Scopus)

• Jatropha-based biorefinery integrating chemical and thermochemical platforms for the co-production of biofuel, bioenergy and chemicals

  Martinez-Hernandez, E., Campbell, G. M. & Sadhukhan, J., 2013, Sustainable Engineering Forum 2013 - Core Programming Area at the 2013 AIChE Annual Meeting: Global Challenges for Engineering a Sustainable Future. Curran Associates, Inc, p. 637-638 2 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• Joint Channel Estimation and Interference Suppressions for MB-OFDM UWB Systems

  Riazul Islam, S. M., Iqbal, A. & Kwak, K. S., 14 Oct 2010, 2010 6th International Conference on Wireless Communications, Networking and Mobile Computing, WiCOM 2010. Institute of Electrical and Electronics Engineers Inc., 6 p. 5600993. (International Conference on Wireless Communications, Networking and Mobile Computing).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Journal bearing condition monitoring based on the modulation signal bispectrum analysis of vibrations

  Hassin, O., Yao, A., Gu, F. & Ball, A., Nov 2016, Power Engineering: Proceedings of the International Conference on Power Transmissions 2016 (ICPT 2016), Chongqing, P.R. China, 27–30 October 2016. Qin, D. & Shao, Y. (eds.). Taylor & Francis, p. 907-912 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Justifications for logic programming

  Viegas Damásio, C., Analyti, A. & Antoniou, G., 22 Oct 2013, Logic Programming and Nonmonotonic Reasoning : 12th International Conference, LPNMR 2013, Proceedings. Cabalar, P. (ed.). p. 530-542 13 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 8148 LNAI).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  25 Citations (Scopus)

• Just Noticeable Difference in Apparent Source Width Depending on the Direction of a Single Reflection

  Johnson, D. & Lee, H., 11 May 2017, 142nd Audio Engineering Society International Convention 2017. Audio Engineering Society, Vol. 2. p. 599-609 10 p. 9757

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Kalman filter for the state estimation of a 2-AXLE railway vehicle

  Mei, T. X., Goodall, R. M. & Li, H., 1999, 1999 European Control Conference (ECC). Institute of Electrical and Electronics Engineers Inc., p. 2431-2435 5 p. 7099687

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  4 Citations (Scopus)

• KEWI: A knowledge engineering tool for modelling AI planning tasks

  Wickler, G., Chrpa, L. & McCluskey, T. L., 2014, KEOD 2014 - Proceedings of the International Conference on Knowledge Engineering and Ontology Development. INSTICC Press, p. 36-47 12 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  5 Citations (Scopus)

• Kinematic Analysis of the Human Thumb with Foldable Palm

  Nanayakkara, V., Ataka, A., Venetsanos, D., Duran, O., Vitzilaios, N., Nanayakkara, T. & Sahinkaya, M. N., 26 Jun 2016, Towards Autonomous Robotic Systems : 17th Annual Conference, TAROS 2016, Proceedings. Alboul, L., Damian, D. & Aitken, J. M. (eds.). Springer, Cham, p. 226-238 13 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 9716).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  2 Citations (Scopus)

• Kite-Powered Design-to-Robotic-Production for Affordable Building on Demand

  Bier, H., Schmehl, R., Mostafavi, S., Anton, A. & Bodea, S., 1 Oct 2017, Proceedings of 34th International Symposium on Automation and Robotics in Construction and Mining (ISARC 2017). Curran Associates, Inc, Vol. 1. p. 566-570 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• Knowledge-Based Building Information Modeling (K-BIM) for Facilities Management

  Charlesraj, V. P. C., 9 Jul 2014, Proceedings of the 31st International Symposium on Automation and Robotics in Construction and Mining (ISARC2014). Queng, H., Shen, X. & Akbarnezhad, A. (eds.). 1 ed. The International Association for Automation and Robotics in Construction (IAARC), p. 936-941 6 p. (Proceedings of the International Symposium on Automation and Robotics in Construction).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  21 Citations (Scopus)

• Knowledge Formulation for AI Planning

  McCluskey, T. L. & Simpson, R. M., 2004, Engineering Knowledge in the Age of the Semantic Web: 14th International Conference, EKAW 2004, Whittlebury Hall, UK, October 5-8, 2004. Proceedings. Motta, E., Shadbolt, N. R., Stutt, A. & Gibbins, N. (eds.). Springer-Verlag Berlin Heidelberg, Vol. LNAI 3257. p. 449-465 17 p. (Lecture Notes in Artificial Intelligence (Subseries of Lecture Notes in Computer Science); vol. LNAI 3257).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  7 Citations (Scopus)