Find Research outputs

Search results

• Conference contribution

  Normalised least mean-square aided decision-directed adaptive detection in hybrid direct-sequence time-hopping UWB systems

  Ahmed, Q. Z. & Yang, L. L., 1 Dec 2008, The 68th IEEE Vehicular Technology Conference, VTC 2008-Fall. 5 p. 4657246

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  9 Citations (Scopus)

• Norway-UK comparative analysis of sustainability in design education

  Pavel, N. & Zitkus, E., 2018, Design Education: Diversity or Conformity? Proceedings of the 20th International Conference on Engineering and Product Design Education (E&PDE18). Bohemia, E., Buck, L., Childs, P., Green, S., Hall, A. & Dasan, A. (eds.). The Design Society, p. 610-615 6 p. (E & PDE).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  File

• Novel Anomaly Detection Based on the nearest Neighbours and Sequential Methods

  Gelman, L. & Petrunin, I., 2011, 8th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2011: CM 2011/MFPT 2011. British Institute of Non-Destructive Testing, Vol. 1. p. 1005-1012 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  2 Citations (Scopus)

• Novel Anomaly Detection Technique for Condition Monitoring

  Gelman, L., Murray, B., Patel, T. H. & Thomson, A., 2013, 10th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2013: CM 2013/MFPT 2013. British Institute of Non-Destructive Testing, Vol. 1. p. 950-964 15 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Novel architecture of modular exponent on reconfigurable system

  Paul, R., Saha, S., Pal, C. & Sau, S., 14 May 2012, 2012 Students Conference on Engineering and Systems, SCES 2012. IEEE, 6 p. 6199123

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  4 Citations (Scopus)

• Novel automated process for aspheric surfaces

  Bingham, R. G., Walker, D. D., Kim, D. H., Brooks, D., Freeman, R. & Riley, D., 24 Oct 2000, Current Developments in Lens Design and Optical Systems Engineering: International Symposium on Optical Science and Technology. Fischer, R. E., Smith, W. J., Johnson, R. B. & Swantner, W. H. (eds.). 1 ed. Vol. 4093. p. 445-450 6 p. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 4093).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  130 Citations (Scopus)

• Novel CNC polishing process for control of form and texture on aspheric surfaces

  Walker, D. D., Beaucamp, A. T. H., Brooks, D., Freeman, R., King, A., McCavana, G., Morton, R., Riley, D. & Simms, J., 16 Oct 2002, Current Developments in Lens Design and Optical Engineering III. Fischer, R. E., Smith, W. J. & Johnson, R. B. (eds.). SPIE, Vol. 4767. p. 99-105 7 p. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 4767).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  47 Citations (Scopus)

• Novel Comparison of Vibration and Acoustic Detection of Local Tooth Damage in Gearboxes

  Gryllias, K. C., Borisov, A., Gelman, L., Shaw, B., Vaidhianathasamy, M. & Walters, M., 2011, 8th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2011: CM 2011/MFPT 2011. British Institute of Non-Destructive Testing, Vol. 1. p. 1013-1026 14 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Novel condition monitoring of induction motor bearings via motor current signature analysis

  Ciszewski, T., Dzwonkowski, A., Swedrowski, L. & Gelman, L., 2017, WCCM 2017 - 1st World Congress on Condition Monitoring 2017. British Institute of Non-Destructive Testing, Vol. 1. p. 1-12 12 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Novel designs for the audio mixing interface based on data visualisation first principles

  Dewey, C. & Wakefield, J. P., 26 May 2016, 140th Audio Engineering Society International Convention 2016. Audio Engineering Society, 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  4 Citations (Scopus)

• Novel designs for the parametric peaking EQ user interface for single channel corrective EQ tasks

  Dewey, C. & Wakefield, J., 2013, 134th Audio Engineering Society Convention 2013. p. 453-462 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  3 Citations (Scopus)

• Novel gear diagnosis technique based on spectral kurtosis

  Chandra, H. & Gelman, L., 2016, ICSV 2016 - 23rd International Congress on Sound and Vibration: From Ancient to Modern Acoustics. International Institute of Acoustics and Vibrations

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  5 Citations (Scopus)

• Novel Half-mode Substrate Integrated Waveguide Filters With Modified Broadside-coupled Split Ring Resonators

  Huang, L. & Cha, H., 8 Feb 2016, Proceedings of 2015 IEEE 16th International Conference on Communication Technology, ICCT 2015. Institute of Electrical and Electronics Engineers Inc., p. 548-552 5 p. 7399898

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  2 Citations (Scopus)

• Novel metrics to quantify the impacts of frequency support provision methods by wind power

  Attya, A. B., Anaya-Lara, O. & Leithead, W. E., 16 Feb 2017, 2016 IEEE PES Innovative Smart Grid Technologies Conference Europe (ISGT-Europe). IEEE Computer Society, 6 p. 7856322

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  7 Citations (Scopus)

• Novel Multi-Scale Cementitious Composites Developed Using Microcrystalline Cellulose (MCC) and Sisal Fibers

  De Souza Filho, A. G., Parveen, S., Rana, S., Vanderlei, R. D. & Fangueiro, R., 15 Jul 2019, Advanced Materials for Defense: 1st World Conference on Advanced Materials for Defense. Fangueiro, R. & Rana, S. (eds.). Trans Tech Publications Ltd, p. 100-106 7 p. (Key Engineering Materials; vol. 812 ).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  2 Citations (Scopus)

• Novel Non-contact Displacement Sensor with Broad Measuring Range

  Zeng, W., Guo, J., Jiang, X., Xie, T. & Li, Z., Aug 2002, Proceedings of the Second International Symposium on Instrumentation Science and Technology. Jiubin, T. & Xianfang, W. (eds.). Harbin Institute of Technology, Vol. 3. p. 259-264 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Novel spatial scanning technique for surface roughness measurement

  Xie, F., Zhang, W., Jiang, X. Q., Zhang, L. & Bennion, I., 2003, 2003 IEEE LEOS Annual Meeting Conference Proceedings. IEEE, Vol. 2. p. 97-98 2 p. (IEEE Photonics Conference (IPC)).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Novel Substrate Integrated Waveguide Bandpass Filter with Broadside-Coupled Complementary Split Ring Resonators

  Huang, L., Robertson, I. D., Yuan, N. & Huang, J., 6 Aug 2012, 2012 IEEE MTT-S International Microwave Symposium, Proceedings: IMS 2012. Institute of Electrical and Electronics Engineers Inc., 3 p. 6258429. (IEEE MTT-S International Microwave Symposium Digest).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  7 Citations (Scopus)

• Novel Technology for Bearing Condition Monitoring Based on the Bicoherence

  Gelman, L., Patel, T. H., Murray, B. & Thomson, A., 2013, 10th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2013: CM 2013/MFPT 2013. British Institute of Non-Destructive Testing, Vol. 1. p. 939-949 11 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Novelty Messages Filtering for Multi Agent Privacy-Preserving Planning

  Gerevini, A. E., Lipovetzky, N., Peli, N., Percassi, F., Saetti, A. & Serina, I., 5 Jul 2019, Proceedings of the 12th International Symposium on Combinatorial Search: (SoCS 2019). Surynek, P. & Yeoh, W. (eds.). AAAI press, p. 79-87 9 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  5 Citations (Scopus)

• Novel vibration diagnosis technology for industrial gearboxes

  Gelman, L., Chandra, H. N., Patel, M. & Manning-Ohren, D., 2017, 24th International Congress on Sound and Vibration, ICSV 2017. International Institute of Acoustics and Vibration, IIAV, Vol. 4 of 9. p. 2709-2714 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Novel white-light interferometer using an electronically scanned Mach-Zehnder interferometer

  Marshall, R. H., Ning, Y. N., Jiang, X. Q., Palmer, A. W., Meggitt, B. T. & Grattan, K. T., 3 Jan 1996, Self-Calibrated Intelligent Optical Sensors and Systems. Wang, A. (ed.). SPIE, Vol. 2594. p. 159-167 9 p. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 2594).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  5 Citations (Scopus)

• Novel Wind Turbine reliability model-implementation to estimate Wind Farms capacity credit

  Subramanian, B. K., Attya, A. B. & Hartkopf, T., 24 Jun 2014, 2014 16th International Conference on Harmonics and Quality of Power (ICHQP). IEEE, p. 97-101 5 p. 6842923

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  5 Citations (Scopus)

• Now I like it, now I don’t: Delay effects and retrospective judgment

  Aldrovandi, S., Poirier, M., Kusev, P., Heussen, D. & Ayton, P., 2011, Proceedings of the Annual Meeting of the Cognitive Science Society. Vol. 33. p. 2866-2871 6 p. (Proceedings of the Annual Meeting of the Cognitive Science Society; vol. 33).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• NSSSD: A new semantic hierarchical storage for sensor data

  Gheisari, M., Movassagh, A. A., Qin, Y., Yong, J., Tao, X., Zhang, J. & Shen, H., 13 Sep 2016, Proceedings of the 2016 IEEE 20th International Conference on Computer Supported Cooperative Work in Design, CSCWD 2016. Institute of Electrical and Electronics Engineers Inc., p. 174-179 6 p. 7565984

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  22 Citations (Scopus)

• Numerical analysis of the heat transfer in an oscillatory flow around the heat exchangers of thermoacoustic systems

  Ilori, O. M., Jaworski, A. J. & Mao, X., 2015, Proceedings of CHT-15: 6th International Symposium on Advances in Computational Heat Transfer, May 25-29, 2015, Rutgers University, New Brunswick, NJ, USA. p. 1052-1066

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Numerical aspects of the development of Quantum Cascade Laser simulation software

  Reeder, R., Udal, A., Velmre, E., Valavanis, A., Cooper, J., Grier, A. & Harrison, P., 5 Nov 2015, BEC 2014 - Proceedings of the 14th Biennial Baltic Electronics Conference. IEEE Computer Society, p. 37-40 4 p. 7320550. (Proceedings of the Biennial Baltic Electronics Conference, BEC; vol. 2015-November).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Numerical rate equation modelling of a 1.6 μm pumped ∼2 μm Tm³⁺-doped tellurite fibre laser

  Richards, B. D. O., Evans, C. A., Ikonić, Z., Harrison, P., Tsang, Y. H., Binks, D. J., Lousteau, J. & Jha, A., 22 Apr 2008, Solid State Lasers and Amplifiers III. Terry, J. A., Graf, T. & Jelínková, H. (eds.). SPIE, Vol. 6998. 10 p. 69981T. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 6998).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• Numerical Simulation Analysis of Interaction Model between Track and Sandy Road Based on Discrete Element Method

  Zhou, L., Gao, J., Li, Q., Hu, C. & Wang, R., 11 Nov 2019, 25th International Conference on Automation & Computing: ICAC 2019. Yu, H. (ed.). Institute of Electrical and Electronics Engineers Inc., 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  2 Citations (Scopus)

• Numerical simulation of heat transfer enhancement for copper foam heat sink in electronic devices using water based BN nanofluids

  Zhang, G., Cao, H., Navarro, M. E., Pomeroy, J. W., Yuan, C., Kuball, M. & Ding, Y., 10 Aug 2018, Proceedings of the 16th International Heat Transfer Conference, IHTC-16. p. 3795-3802 8 p. (International Heat Transfer Conference).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Numerical simulation of oscillatory flow and heat transfer in the heat exchangers of thermoacoustic systems

  Ilori, O. M., Mao, X. & Jaworski, AJ., 16 Aug 2015, Proceedings of the 24th IIR International Congress of Refrigeration (ICR). International Institute of Refrigeration, p. 1308-1315 8 p. 522

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Numerical simulation of oscillatory flow in a thermoacoustic stack

  Saleh, Y. M., Mao, X. & Jaworski, A. J., 21 Aug 2007, Proceedings of the 22nd IIR International Congress of Refrigeration (ICR 2007). 7 p. ICR07-A1-278

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Numerical studies of the velocity distribution within the volute of a centrifugal pump

  Al-Obaidi, A., Pradhan, S., Asim, T., Mishra, R. & Zala, K., 2014, 27th International Congress of Condition Monitoring and Diagnostic Engineering. Brisbane, Australia

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• Numerical Study of Motor Electrical Signature for Condition Monitoring of Gear Tooth Breakage in a Motor-Gear System

  Otuyemi, F., Sun, X., Gu, F. & Ball, A. D., 18 Sep 2022, Proceedings of IncoME-VI and TEPEN 2021 : Performance Engineering and Maintenance Engineering. Zhang, H., Feng, G., Wang, H., Gu, F. & Sinha, J. K. (eds.). Springer, Cham, Vol. 117. p. 341-358 18 p. (Mechanisms and Machine Science; vol. 117).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Objective evaluation of car noise by means of support vector machine

  Sha, D. Q., Jiao, F. L., Liu, K., Gu, F. S., Ball, A. D. & Jiang, J., 1 Dec 2006, Institute of Noise Control Engineering of the USA - 35th International Congress and Exposition on Noise Control Engineering, INTER-NOISE 2006. Vol. 7. p. 4779-4788 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Objective measurement of music quality using Inter-Band Relationship analysis

  Fenton, S., Fazenda, B. & Wakefield, J., 2011, 130th Audio Engineering Society Convention 2011. Vol. 2. p. 760-769 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  8 Citations (Scopus)

• Objective profiling of perceived punch and clarity in produced music

  Fenton, S. & Wakefield, J., 2012, 132nd Audio Engineering Society Convention 2012. p. 587-601 15 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  8 Citations (Scopus)

• Objective quality measurement of audio using multiband dynamic range analysis

  Fenton, S. M., Fazenda, B. M. & Wakefield, J. P., 2009, 25th Reproduced Sound Conference 2009, REPRODUCED SOUND 2009: The Audio Explosion - Proceedings of the Institute of Acoustics. Vol. 31. p. 6-18 13 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  3 Citations (Scopus)

• Observer based tuning techniques and integrated SAW torque transducers for two-inertia servo-drive systems

  O'Sullivan, T. M., Bingham, C. M. & Schofield, N., 7 Aug 2006, 2005 European Conference on Power Electronics and Applications. IEEE Computer Society, 10 p. 1665817

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Occam's razor: supporting visual query expression for content-based image queries

  Venters, C. C., Hartley, R. J. & Hewitt, W. T., 17 Jan 2005, Proceedings of Internet Imaging VI: Electronic Imaging 2005. Santini, S., Schettini, R. & Gevers, T. (eds.). SPIE, Vol. 5670. p. 44-55 12 p. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 5670).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• OCL plus: Processes and events in object-centred planning

  Shah, S., Chrpa, L., Gregory, P., McCluskey, T. L. & Jimoh, F., 2012, STAIRS 2012 - Proceedings of the Sixth Starting AI Researchers' Symposium. IOS Press, Vol. 241. p. 282-293 12 p. (Frontiers in Artificial Intelligence and Applications; vol. 241).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Offshore/nearshore outsourcing as a strategic competitive posturing: insights from Ghana

  Adams, K., Nyuur, R. B., Mordi, C. & Debrah, Y. A., 6 Sep 2018, Proceedings from the 32nd Annual British Academy of Management Conference: Driving Productivity in Uncertain and Challenging Times. British Academy of Management, p. 1-35 35 p. 631

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• OGLP-400: An Innovative Computer Controlled Polishing Machine

  Kim, S-W., Rees, D., Walker, D. D., Bingham, R. G., Brooks, D., Humm, B., Jamshidi, H., Kim, D-H., Yang, H-S. & Nixon, G., 19 Aug 1996, Specification, Production, and Testing of Optical Components and Systems. Gee, A. E. & Houee, J-F. (eds.). SPIE, Vol. 2775. p. 491-496 6 p. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 2775).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  8 Citations (Scopus)

• Okra extracts as emulsifiers for acidic emulsions

  Alba, K., Kontogiorgos, V., Georgiadis, N. & Ritzoulis, C., 2014, Gums and Stabilisers for the Food Industry 17 - The Changing Face of Food Manufacture: The Role of Hydrocolloids. Royal Society of Chemistry, p. 238-244 7 p. (Food Research International; vol. 54, no. 2).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• On Applying the AGM Theory to DLs and OWL

  Flouris, G., Plexousakis, D. & Antoniou, G., 4 Nov 2005, The Semantic Web, ISWC 2005: 4th International Semantic Web Conference, ISWC 2005, Proceedings. Gill, Y., Motta, E., Benjamins, V. R. & Musen, M. A. (eds.). Springer-Verlag Berlin Heidelberg, Vol. 3729 LNCS. p. 216-231 16 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 3729 LNCS).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  61 Citations (Scopus)

• On a Road to Promises That Work

  Cleary, M., Rooke, J. & Koskela, L., 1 Dec 2010, 18th Annual Conference of the International Group for Lean Construction. Walsh, K. & Alves, T. (eds.). The International Group for Lean Construction, p. 366-385 11 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  3 Citations (Scopus)

• On characterising surface topography of metal powder bed fusion additive manufactured parts

  Lou, S., Townsend, A., Jiang, X., Blunt, L., Zeng, W. & Scott, P., 2016, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016. euspen, 2 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  9 Citations (Scopus)

• On Compiling Away PDDL3 Soft Trajectory Constraints without Using Automata

  Percassi, F. & Gerevini, A. E., 6 Jul 2019, Proceedings of the 29th International Conference on Automated Planning and Scheduling: (ICAPS 2019). Benton, J., Lipovetzky, N., Onaindia, E., Smith, D. E. & Srivastava, S. (eds.). AAAI press, p. 320-328 9 p. (Proceedings International Conference on Automated Planning and Scheduling, ICAPS).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  7 Citations (Scopus)

• On Computing the Set of Acceptable Arguments in Abstract Argumentation

  Thimm, M., Cerutti, F. & Vallati, M., 31 Aug 2020, Proceedings of the 8th International Conference on Models of Argument : (COMMA 2020). Prakken, H., Bistarelli, S., Santini, F. & Taticchi, C. (eds.). IOS Press, p. 363-370 8 p. (Frontiers in Artificial Intelligence and Applications; vol. 326).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• On creating complementary pattern databases

  Franco Aixela, S., Torralba, A., Lelis, L. HS. & Barley, M., 1 Aug 2017, Proceedings of the 26th International Joint Conference on Artificial Intelligence (IJCAI-17). Sierra, C. (ed.). p. 4302-4309 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  17 Citations (Scopus)