Find Research outputs

Search results

• Conference contribution

  Mid-infrared quantum cascade laser waveguide losses: An anisotropic complex permittivity model

  Ikonić, Z., Rehouma, G., Evans, C. A., Indjin, D. & Harrison, P., 17 Nov 2008, Proceedings of CAOL 2008: 4th International Conference on Advanced Optoelectronics and Lasers. Institute of Electrical and Electronics Engineers Inc., p. 29-31 3 p. 4671888. (Proceedings of CAOL: International Conference on Advanced Optoelectronics and Lasers).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Milestone Report of the Manufacturing and Instrumentation Coordinating Committee: From MEMS to Enterprise Systems

  Ollero, A., Morel, G., Bernus, P., Nof, S. Y., Sasiadek, J., Boverie, S., Erbe, H. & Goodall, R., 2002, Proceedings of the 15th IFAC World Congress International Federation of Automatic Control. 1 ed. Elsevier, Vol. 35. p. 179-189 11 p. (IFAC Proceedings Volumes (IFAC-PapersOnline); vol. 35, no. 1).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• Millimeter Wave Receiver Comparison Under Energy vs Spectral Efficiency Trade-off

  Bin Abbas, W., Gomez-Cuba, F. & Zorzi, M., 17 Aug 2017, European Wireless 2017 - 23rd European Wireless Conference. Institute of Electrical and Electronics Engineers Inc., 7 p. 8011299

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  5 Citations (Scopus)

• Miniaturized Spiral UWB Transparent Wearable Flexible Antenna for Breast Cancer Detection

  Saeidi, T., Mahmood, S. N., Juraiza Ishak, A., Alani, S., Ali, S. M., Ismail, I. & Alhawari, A. R. H., 25 Dec 2020, 2020 International Symposium on Networks, Computers and Communications, ISNCC 2020. Institute of Electrical and Electronics Engineers Inc., 6 p. 9297255

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  6 Citations (Scopus)

• Minimising Content Stagnation in Construction Education: Automating the Content Update through a Shared Web Repository for Distance Construction Education

  Keraminiyage, K., Amaratunga, D., Haigh, R. & Kaklauskas, A., 1 Dec 2008, ISARC 2008: Proceedings from the 25th International Symposium on Automation and Robotics in Construction. The International Association for Automation and Robotics in Construction (IAARC), p. 858-863 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  2 Citations (Scopus)

• Minimum mean square error-ordered successive interference cancellation (MMSEOSIC) in UWB-MIMO systems

  Iqbal, A., Islam, S. M. R. & Kwak, K. S., 23 Dec 2010, 2010 International Conference on Information and Communication Technology Convergence, ICTC 2010. Institute of Electrical and Electronics Engineers Inc., p. 53-54 2 p. 5674724. (International Conference on Information and Communication Technology Convergence, ICTC).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Minimum sand transport conditions in gas-solid-liquid three-phase stratified flow in horizontal pipelines

  Fajemidupe, O. T., Aliyu, A. M., Baba, Y. D., Archibong, A. E., Okeke, N. E., Ehinmowo, A. B. & Yeung, H., 7 Aug 2019, SPE Nigeria Annual International Conference and Exhibition 2019, NAIC 2019. Society of Petroleum Engineers (SPE), 9 p. SPE-198726-MS

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• Mining Free-Text Medical Notes for Suicide Risk Assessment

  Adamou, M., Antoniou, G., Greasidou, E., Lagani, V., Charonyktakis, P. & Tsamardinos, I., 9 Jul 2018, Proceedings - 10th Hellenic Conference on Artificial Intelligence, SETN 2018. New York, New York, USA: Association for Computing Machinery (ACM), 8 p. 47

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  4 Citations (Scopus)

• Minor Groove Binders for DNA as Antitypanosomal Agents: the Veterinary Context

  Suckling, C. J., Khalaf, A. I., Scott, F., Gillingwater, K., Morrison, L., De Koning, H. P., Giordani, F. & Barrett, M., 1 Nov 2017, 3rd International Electronic Conference on Medicinal Chemistry. 19 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  File

• Misalignment diagnosis of a planetary gearbox based on vibration analysis

  Abdalla, G. M., Tian, X., Zhen, D., Gu, F., Ball, A. & Chen, Z., 2014, 21st International Congress on Sound and Vibration 2014, ICSV 2014. International Institute of Acoustics and Vibrations, Vol. 4. p. 2775-2783 9 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  4 Citations (Scopus)

• Missing Data Recovery for Downstream Learning in Low-Cost Environmental Sensor Networks

  Agbo, B., Al-Aqrabi, H., Alsboui, T., Hussain, M. & Hill, R., 24 Jul 2023, 2023 9th International Conference on Information Technology Trends: ITT 2023. Institute of Electrical and Electronics Engineers Inc., p. 26-31 6 p. 10184239

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Mix Clarity Prediction using Multiresolution Inter-Band Relationship Analysis

  Parker, A. & Fenton, S., 28 May 2020, Proceedings of the 148th AES Convention. Audio Engineering Society, 10340

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
  1 Citation (Scopus)

• Mixing the Immiscible: Improvisation within Fixed-Media Composition

  Tremblay, P. A., 1 Jun 2012, Electroacoustic Music Studies Conference Meaning and Meaningfulness in Electroacoustic Music.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  31 Citations (Scopus)

• Mobile Agent Based Data Fusion for Wireless Sensor Networks with a XML Framework

  Lu, G., Lu, J. & Yip, J., 1 Dec 2008, Proceedings of the 2008 International Conference on Internet Computing, ICOMP 2008. Arabnia, H. R. & Clincy, V. A. (eds.). CSREA Press, p. 298-303 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  2 Citations (Scopus)

• Mobile Agent Itinerary Planning Approaches in Wireless Sensor Networks- State of the Art and Current Challenges

  Alsboui, T., Alrifaee, M., Etaywi, R. & Jawad, M. A., 31 Oct 2016, Industrial Networks and Intelligent Systems: Second International Conference, INISCOM 2016, Leicester, UK, October 31 – November 1, 2016, Proceedings. Maglaras, L. A., Janicke, H. & Jones, K. (eds.). 1st ed. Springer, Cham, p. 143-153 11 p. (Lecture Notes of the Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering, LNICST; vol. 188).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  8 Citations (Scopus)

• MODAL: An enabling technology for wireless access

  O'Reilly, JJ., Lane, PM., Capstick, MH., Salgado, HS., Heidemann, R., Hofstetter, R. & Schmuck, H., 1993, Telecommunications, 1993. Fourth IEE Conference on (Conf. Publ. No. 371). Manchester: IEEE, p. 6-10 5 p. 4427630

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Modal Logic S5 in Answer Set Programming with Lazy Creation of Worlds

  Alviano, M., Batsakis, S. & Baryannis, G., 29 Aug 2022, Logic Programming and Nonmonotonic Reasoning: 16th International Conference, LPNMR 2022, Genoa, Italy, September 5–8, 2022, Proceedings. Gottlob, G., Inclezan, D. & Maratea, M. (eds.). Cham: Springer, Cham, Vol. 13416. p. 16-28 13 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 13416 LNAI).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  File

• Moddicom: A complete and easily accessible library for prognostic evaluations relying on image features

  Dinapoli, N., Alitto, A. R., Vallati, M., Gatta, R., Autorino, R., Boldrini, L., Damiani, A. & Valentini, V., 5 Nov 2015, 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society : EMBC. p. 771-774 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  50 Citations (Scopus)

• Model based abduction in design

  Koskela, L. & Kroll, E., 11 Feb 2019, Design Computing and Cognition '18. Gero, J. S. (ed.). 1 ed. Springer Verlag, p. 247-264 18 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Model-Based Failure Analysis of Business Process

  Ge, X., Paige, R. F. & McDermid, J. A., 2011, ICEIS 2011: Proceedings of the 13th International Conference on Enterprise Information Systems. Zhang, R., Cordeiro, J., Li, X., Zhang, Z. & Zhang, J. (eds.). SciTePress, Vol. 4. p. 388-391 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  2 Citations (Scopus)

• Model-Based Solutions for Structural Coupling Problems in Aircraft

  Halsey, S. A., Goodall, R. M., Caldwell, B. D. & Pearson, J. T., 2007, 17th IFAC Symposium on Automatic Control in Aerospace. 7 ed. Elsevier, Vol. 40. p. 503-508 6 p. (IFAC Proceedings Volumes (IFAC-PapersOnline); vol. 40, no. 7).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  1 Citation (Scopus)

• Model for a CAD-assisted designing process with focus on the definition of the surface texture specifications and quality

  Qi, Q., Jiang, X., Scott, P. J. & Lu, W., 2013, Proceedings of the 37th International MATADOR 2012 Conference. p. 273-276 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Model for Smart, Self-learning and Adaptive Resilience Building

  Kaklauskas, A., Lill, I., Amaratunga, D. & Ubarte, I., 1 May 2019, 10th Nordic Conference on Construction Economics and Organization. Lill, I. & Witt, E. (eds.). Emerald Group Publishing Ltd., Vol. 2. p. 315-324 10 p. (Emerald Reach Proceedings Series).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  3 Citations (Scopus)

• Modeling and Simulation of an Identical Double Micro-Ring Resonator

  Jiang, X. & Yang, S., 29 Nov 2010, 2010 IEEE 5th International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2010. p. 1149-1153 5 p. 5592534

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  2 Citations (Scopus)

• Modeling approaches for 3D woven composites: Potential and limitations: Potential and limitations

  Saleh, M. N., Snape, A. E., Turner, J. L., Tew, H., Scaife, R. J. & El-Dessouky, H. M., 2017, The Fiber Society Spring Meeting and Technical Conference 2017 : Next Generation Fibers for Smart Products. The Fiber Society, 1 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  1 Citation (Scopus)

• Modeling of CO, NO_x and CO₂ due to vehicle emissions from sultan Qaboos university in Oman

  Abdul-Wahab, S. A. & Fadlallah, S. O., 11 Nov 2014, Hydraulic Engineering III - Proceedings of the 3rd Technical Conference on Hydraulic Engineering, CHE 2014. Xie, L. (ed.). CRC Press/Balkema, p. 159-164 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Modeling the dynamic behaviour of the wheel rail interface using a novel 3D wheel-rail contact model

  Anyakwo, A., Pislaru, C., Ball, A. & Gu, F., 2011, 5th IET Conference on Railway Condition Monitoring and Non-Destructive Testing, RCM 2011. 581 CP ed. Vol. 2011.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Modeling the Transmission Path Effect in a Planetary Gearbox

  Graja, O., Zghal, B., Dziedziech, K., Chaari, F., Jablonski, A., Barszcz, T. & Haddar, M., 20 Jul 2018, Rotating Machinery and Signal Processing: Proceedings of the First Workshop on Signal Processing Applied to Rotating Machinery Diagnostics, SIGPROMD’2017, April 09-11, 2017, Setif, Algeria. Felkaoui, A., Chaari, F. & Haddar, M. (eds.). 1st ed. Springer, Cham, p. 116-122 7 p. (Applied Condition Monitoring; vol. ACM 12).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Modeling the Transmission Path in a Planetary Gearbox: A Comparison of Two Methods

  Graja, O., Ghorbel, A., Chaari, F. & Haddar, M., 31 May 2020, Mechatronics 4.0: Proceedings of the First International Workshop on Mechatronics 4.0, June 8–9, 2019, Mahdia, Tunisia. Barkallah, M., Choley, J-Y., Louati, J., Ayadi, O., Chaari, F. & Haddar, M. (eds.). 1st ed. Springer, Cham, p. 95-104 10 p. (Lecture Notes in Mechanical Engineering).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  2 Citations (Scopus)

• Modelling alternative strategies for mental rotation

  Peebles, D., Oct 2019, Proceedings of the ICCM 2019: 17th International Conference on Cognitive Modelling. Stewart, T. C. (ed.). Applied Cognitive Science Lab, 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  File

• Modelling and Analysis of a Railway Wheelset for Active Control

  Li, H. & Goodall, R., 1998, UKACC International Conference on CONTROL '98. 455 ed. Essex: IET, p. 1289-1293 5 p. (IEE Conference Publication).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  4 Citations (Scopus)

• Modelling and Analysis of Internal Excitation of Cracked Spur Gear Considering Effects of Tooth Errors

  Yang, L., Zou, D., Sun, X., Shao, Y., Gu, F., Ball, A. & Mba, D., 4 Mar 2023, Proceedings of TEPEN 2022 : Efficiency and Performance Engineering Network. Zhang, H., Ji, Y., Liu, T., Sun, X. & Ball, A. D. (eds.). Springer, Cham, Vol. 129. p. 841-852 12 p. (Mechanisms and Machine Science; vol. 129 MMS).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Modelling and Control of a Leg Rehabilitation System for a Reconfigurable Wheelchair

  Fadlallah, S. O. & Goher, K. M., 23 Jan 2014, Proceedings - 2013 IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2013. IEEE, p. 162-167 6 p. 6719952

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Modelling and control of railway vehicle suspensions

  Zolotas, A. C. & Goodall, R. M., 30 Oct 2007, Mathematical Methods for Robust and Nonlinear Control: EPSRC Summer School. Turner, M. C. & Bates, D. G. (eds.). p. 373-411 39 p. (Lecture Notes in Control and Information Sciences; vol. 367).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  9 Citations (Scopus)

• Modelling and validation of a regenerative shock absorber system

  Wang, R., Chen, Z., Xu, H., Schmidt, K., Gu, F. & Ball, A. D., 24 Oct 2014, ICAC 2014 - Proceedings of the 20th International Conference on Automation and Computing: Future Automation, Computing and Manufacturing. Institute of Electrical and Electronics Engineers Inc., p. 32-37 6 p. 6935456

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  15 Citations (Scopus)

• Modelling and Vibration Signal Analysis for Condition Monitoring of Industrial Robots

  Han, H., Shi, D., Gu, L., Wei, N. & Gu, F., 18 Sep 2022, Proceedings of IncoME-VI and TEPEN 2021 : Performance Engineering and Maintenance Engineering. Zhang, H., Feng, G., Wang, H., Gu, F. & Sinha, J. K. (eds.). Springer, Cham, Vol. 117. p. 879-891 13 p. (Mechanisms and Machine Science; vol. 117).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Modelling comparison of actively-steered railway vehicles using Simpack and Matlab

  Mei, T. X., Nagy, Z. & Goodall, R. M., 4 May 2015, 1999 European Control Conference (ECC). Institute of Electrical and Electronics Engineers Inc., p. 2425-2430 6 p. 7099686

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• Modelling for Designing, Managing and Improving Virtual Enterprises in One-of-a-kind Business

  Koskela, L., Kazi, A. S. & Hannus, M., 31 May 2001, Global Engineering, Manufacturing and Enterprise Networks: IFIP TC5 WG5.3/5.7/5.12 Fourth International Working Conference on the Design of Information Infrastructure Systems for Manufacturing (DIISM 2000). November 15–17, 2000, Melbourne, Victoria, Australia. Mo, J. P. T. & Nemes, L. (eds.). 1 ed. Springer US, Vol. 63. p. 119-127 9 p. (IFIP Advances in Information and Communication Technology; vol. 63).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Modelling Formation of Online Temporal Communities

  Inuwa-Dutse, I., 23 Apr 2018, WWW '18: Proceedings of the 2018 World Wide Web Conference. Association for Computing Machinery, Inc, p. 867-871 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  3 Citations (Scopus)

• Modelling in-cylinder pressures for accurate simulations of instantaneous angular speed responses to combustion faults in an IC engine powertrain

  Xu, Y., Fei, J., Yun, Y., Wang, J., Gu, F. & Ball, A. D., 1 Aug 2019, Sixteenth International Conference on Condition Monitoring and Asset Management (CM 2019) . British Institute of Non-Destructive Testing, Vol. 1. 133

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Modelling Mechanical Behaviour of Amorphous Poly (L-Lactic Acid) under Biaxial Stretch at Temperatures above Glass Transition

  Wei, H., Menary, G. & Yan, S., 8 May 2018, ANTEC 2017 - Proceedings of the 75th Annual Technical Conference & Exhibition of the Society of Plastics Engineers. Society of Plastics Engineers, p. 489-492 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• Modelling mental imagery in the ACT-R cognitive architecture

  Peebles, D., 1 Oct 2019, 41st Annual Meeting of the Cognitive Science Society (CogSci 2019) : Creativity + Cognition + Computation . Goel, A., Seifert, C. & Freksa, C. (eds.). Cognitive Science Society, p. 2550-2556 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  1 Citation (Scopus)

• Modelling of interferometric crosstalk in optical networks

  Moura, L., Karafolas, N., Lane, P., Hill, A. & O'Reilly, J., 1996, Global Telecommunications Conference, 1996. GLOBECOM '96. 'Communications: The Key to Global Prosperity. IEEE, Vol. 1. p. 333-337 5 p. 5677909

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  12 Citations (Scopus)

• Modelling of Spur Gear Dynamic Behaviours with Tooth Surface Wear

  Sun, X., Wang, T., Zhang, R., Gu, F. & Ball, A. D., 28 Aug 2020, Advances in Asset Management and Condition Monitoring, COMADEM 2019. Ball, A., Gelman, L. & Rao, B. K. N. (eds.). Springer, Cham, Vol. 166. p. 1437-1449 13 p. (Smart Innovation, Systems and Technologies; vol. 166).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Modelling of tirapazamine effects on solid tumour morphology

  Kazmi, N., Hossain, M. A. & Phillips, R. M., 2011, 5th International Conference on Practical Applications of Computational Biology and Bioinformatics (PACBB 2011). Vol. 93. p. 125-132 8 p. (Advances in Intelligent and Soft Computing; vol. 93).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  2 Citations (Scopus)

• Modelling options for ballast track dynamics

  Shih, J-Y., Kostovasilis, D., Bezin, Y. & Thompson, D. J., 2017, Proceedings of the 24th International Congress on Sound and Vibration: London Calling, 2017. Gibbs, B. (ed.). International Institute of Acoustics and Vibrations, p. 3746-3753 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  8 Citations (Scopus)

• Modelling rail vehicle dynamics using a novel 2D wheel-rail contact model

  Anyakwo, A., Pislaru, C. & Ball, A., 2013, Proceedings - UKSim-AMSS 7th European Modelling Symposium on Computer Modelling and Simulation, EMS 2013. IEEE Computer Society, p. 463-468 6 p. 6779889

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  2 Citations (Scopus)

• Modelling Road Traffic Incident Management Problems for Automated Planning

  Shah, M. M. S., McCluskey, T. L., Gregory, P. & Jimoh, F., 1 Sep 2012, Control in Transportation Systems 2012: Preprints of the 13th IFAC Symposium CTS'12. Stoilov, T. (ed.). 24 ed. IFAC Publications, Vol. 45. p. 360-365 6 p. (IFAC Proceedings Volumes (IFAC-PapersOnline); vol. 45, no. 24).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Modelling the dynamic behaviour of a ballscrew system taking into account the changing position of the ballscrew nut

  Holroyd, G., Fletcher, S. & Myers, A., 2005, Laser Metrology and Machine Performance VII: 7th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2005. Shore, P. (ed.). euspen, p. 148-158 11 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  3 Citations (Scopus)

• Modelling the Dynamics of a CNC Spindle for Tool Condition Identification Based on On-Rotor Sensing

  Li, C., Shi, D., Li, B., Wang, H., Feng, G., Gu, F. & Ball, A. D., 18 Sep 2022, Proceedings of IncoME-VI and TEPEN 2021 : Performance Engineering and Maintenance Engineering. Zhang, H., Feng, G., Wang, H., Gu, F. & Sinha, J. K. (eds.). Springer, Cham, Vol. 117. p. 1057-1071 15 p. (Mechanisms and Machine Science; vol. 117).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review