Find Research outputs

Search results

• Conference contribution

  Detailed Models for Dynamic Analysis of Railway Vehicles

  Magalhães, H., Pombo, J., Ambrósio, J. & Pereira, M., Apr 2014, Proceedings of the Second International Conference on Railway Technology: Research, Development and Maintenance. Pombo, J. (ed.). Civil-Comp Press, 271. (Civil-Comp Proceedings; vol. 104).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Detecting Bearing Faults Using an Ensemble Average Autocorrelation Based Stochastic Subspace Identification

  Xu, Y., van Vuuren, P., Tang, X., Gu, F. & Ball, A., Jul 2017, Proceedings of COMADEM 2017. Sherrington, I., Onsy, A., Rao, R., Brooks, H. & Philip, J. (eds.). p. 389-395 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Detecting Railway Under-Track Voids using Multi-Train In-Service Vehicle Accelerometer

  Balouchi, F., Bevan, A. & Formston, R., 27 Sep 2016, 7th IET Conference on Railway Condition Monitoring 2016 (RCM 2016). CP701 ed. Institution of Engineering and Technology, 6 p. 7920668. (IET Conference Publications; vol. 2016, no. CP701).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  8 Citations (Scopus)

• Detection and Diagnosis of Broken Rotor Bar Based on the Analysis of Signals from a Variable Speed Drive

  Ashari, D., Lane, M., Ball, A. & Gu, F., 2014, Proceedings of the 3rd International Workshop and Congress on eMaintenance: eMaintenance2014 - Trends in technologies and methodologies, challenges, possibilities and applications. Kumar, U., Karim, R., Parida, A. & Tretten, P. (eds.). p. 41-46 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• Detection and Diagnosis of Centrifugal Pump Bearing Faults Based on the Envelope Analysis of Airborne Sound Signals

  Daraz, A., Alabied, S., Smith, A., Gu, F. & Ball, A., 1 Jul 2019, 2018 24th International Conference on Automation and Computing (ICAC). Ma, X. (ed.). Institute of Electrical and Electronics Engineers Inc., 6 p. 8749053

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  4 Citations (Scopus)

• Detection and diagnosis of compound faults in induction motors using electric signals from variable speed drives

  Shaeboub, A., Lane, M., Haba, U., Gu, F. & Ball, A. D., 24 Oct 2016, 2016 22nd International Conference on Automation and Computing, ICAC 2016: Tackling the New Challenges in Automation and Computing. Institute of Electrical and Electronics Engineers Inc., p. 306-312 7 p. 7604937

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  9 Citations (Scopus)

• Detection and Diagnosis of Mechanical Seal Faults in Centrifugal Pumps Based on Acoustic Measurement

  Daraz, A., Alabied, S., Zhen, D., Gu, F. & Ball, A. D., 28 Aug 2020, Advances in Asset Management and Condition Monitoring, COMADEM 2019. Ball, A., Gelman, L. & Rao, B. K. N. (eds.). Springer, Cham, Vol. 166. p. 963-975 13 p. (Smart Innovation, Systems and Technologies; vol. 166).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  2 Citations (Scopus)

• Detection and diagnosis of motor stator faults using electric signals from variable speed drives

  Shaeboub, A., Abusaad, S., Hu, N., Gu, F. & Ball, A., 2 Nov 2015, Proceedings of the 21st International Conference on Automation & Computing. IEEE, 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  8 Citations (Scopus)

• Detection of Chipped Tooth in Gears by the Novel Residual Technology

  Gelman, L., Jennions, I. & Petrunin, I., 2011, 8th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies 2011: CM 2011/MFPT 2011. British Institute of Non-Destructive Testing, Vol. 1. p. 966-977 12 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Detection of diesel engine injector faults using acoustic emissions

  Elamin, F., Fan, Y., Gu, F. & Ball, A., 10 Sep 2010, COMADEM 2010 - Advances in Maintenance and Condition Diagnosis Technologies Towards Sustainable Society, Proc. 23rd Int. Congr. Condition Monitoring and Diagnostic Engineering Management. p. 297-303 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  7 Citations (Scopus)

• Detection of induction motors faults using instantaneous phase variation

  Alshandoli, A. F. S., Gu, F. & Ball, A. D., 30 Sep 2004, Proceedings of the 7th Biennial Conference on Engineering Systems Design and Analysis, ESDA 2004. American Society of Mechanical Engineers (ASME), Vol. 3. p. 715-721 7 p. ESDA2004-58207

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  2 Citations (Scopus)

• Detection of Low Adhesion in the Railway Vehicle Wheel/Rail Interface: Assessment of Multi-Bodied Simulation Data

  Ward, C., Goodall, R., Dixon, R. & Charles, G., 22 Oct 2012, Proceedings of the 2012 UKACC International Conference on Control. IEEE, p. 725-730 6 p. 6334719

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Determination of the material constants of creep damage constitutive equations using Matlab optimization procedure

  Igual, J. Z. & Xu, Q., 30 Oct 2015, 2015 21st International Conference on Automation and Computing: Automation, Computing and Manufacturing for New Economic Growth, ICAC 2015. Institute of Electrical and Electronics Engineers Inc., 7313991

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  4 Citations (Scopus)

• Determining a robust, Pareto optimal geometry for a welded joint

  Barrans, S. M. & Radhi, H. E., 2014, Mechanical and Aerospace Engineering V. Trans Tech Publications Ltd, Vol. 1016. p. 39-43 5 p. (Advanced Materials Research; vol. 1016).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Determining linearity of optimal plans by operator schema analysis

  Chrpa, L., Vallati, M. & McCluskey, T. L., 2013, Proceedings of the 10th Symposium on Abstraction, Reformulation, and Approximation, SARA 2013. p. 34-41 8 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  2 Citations (Scopus)

• Determining redundant actions in sequential plans

  Chrpa, L., McCluskey, T. L. & Osborne, H., 2012, Proceedings - 2012 IEEE 24th International Conference on Tools with Artificial Intelligence, ICTAI 2012. Vol. 1. p. 484-491 8 p. 6495084

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  4 Citations (Scopus)

• Determining Representativeness of Training Plans: A Case of Macro-operators

  Chrpa, L. & Vallati, M., 13 Dec 2018, 30th IEEE International Conference on Tools with Artificial Intelligence (ICTAI 2018). IEEE, p. 488-492 5 p. 8576079

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  File
  2 Citations (Scopus)

• Determining Sample Size in Binary Measurement System

  Zhao, Y., He, Z., Blunt, L., Jiang, X., Cao, Y. & Zhang, H., 31 Dec 2008, Fourth International Symposium on Precision Mechanical Measurements. Fei, Y., Fan, K-C. & Lu, R. (eds.). SPIE, Vol. 7130. 7 p. 71305X. (Proceedings of SPIE - The International Society for Optical Engineering; vol. 7130).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Determining Stress in Turbocharger Impellers due to Component Machining Process

  Barrans, S., Tabriz, M. S. E. & Ellis, C., 2017, ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers (ASME), Vol. Volume 7A: Structures and Dynamics. 11 p. V07AT30A006

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• Determining the Elastic Moduli of the Individual Component Layers of Cylindrical Thermal Barrier Coatings by means of a Mixed Numerical Experimental Technique

  Lauwagie, T., Lambrinou, K., Mircea, I., Bartsch, M., Heylen, W. & Van Der Biest, O., 30 Aug 2005, Functionally Graded Materials VIII. Van der Biest, O., Gasik, M. & Vleugels, J. (eds.). Trans Tech Publications Ltd, p. 653-658 6 p. (Materials Science Forum; vol. 492-493).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  3 Citations (Scopus)

• Deterministic fabrication of surface micro-step features using a facet diamond cutting tool

  Tong, Z., Jiang, X. & Blunt, L., 5 Jun 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN): June 4th-8th 2018, Venice, IT. Riemer, O., Savio, E., Billington, D., Leach, R. K. & Phillips, D. (eds.). euspen, p. 91-92 2 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• Developing a conceptual framework for investigating the resilience of construction SMEs and their supply chains against extreme weather events

  Wedawatta, G., Ingirige, B. & Amaratunga, D., 1 Dec 2010, COBRA 2010: Construction, Building and Real Estate Research Conference of the Royal Institution of Chartered Surveyors. Royal Institution of Chartered Surveyors

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  3 Citations (Scopus)

• Developing a Domain Ontology of Information Science (OIS)

  Sawsaa, A. F. & Lu, J., 1 Nov 2012, International Conference on Information Society, i-Society 2012, Proceedings. IEEE, Vol. 1. p. 447-452 6 p. 6285013

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  2 Citations (Scopus)

• Developing a Learning Analytics Model to Explore Computer Science Student Motivation in the UK

  Al Ansari, H., Ward, R. & Hill, R., 2 Aug 2021, Proceedings 21st IEEEE International Conference on Advanced Learning Technologies: ICALT 2021. Chang, M., Chen, N-S., Sampson, D. G. & Tlili, A. (eds.). IEEE, p. 442-444 3 p. 9499817. (Proceedings (IEEE International Conference on Advanced Learning Technologies)).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Developing a Multi-professional e-Learning Mentor Update Package

  Ousey, K. J. & White, S. A., Feb 2009, 2009 International Conference on Mobile, Hybrid, and On-line Learning. IEEE Computer Society, p. 103-107 5 p. 4782611

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  2 Citations (Scopus)

• Developing an Inerter Model using Multibody Dynamics Software for Railway Vehicle Applications

  Zhao, Y., Tucker, G., Goodall, R., Iwnicki, S., Jaing, J. Z. & Smith, M., 22 Jan 2018, Dynamics of Vehicles on Roads and Tracks: Proceedings of the 25th International Symposium on Dynamics of Vehicles on Roads and Tracks (IAVSD 2017), 14-18 August 2017, Rockhampton, Queensland, Australia. Spiryagin, M., Gordon, T., Cole, C. & McSweeney, T. (eds.). CRC Press, Vol. 2. p. 1267-1272

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  2 Citations (Scopus)

• Developing an Open Writing Aid for Non-Native Speakers of English: An Ontology-Based Approach

  Sanjurjo-González, H., Alaiz-Moretón, H., Ramón, N., Labrador, B. & García, I., 2019, 2019 14th Iberian Conference on Information Systems and Technologies (CISTI). IEEE, p. 1-6 6 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Developing a Price Competitiveness Index to Calculate Price Elasticity of Demand for Outbound Tourism in Australia

  Seetaram, N., Forsyth, P. & Dwyer, L., 2014, CAUTHE 2014 Tourism and Hospitality in the Contemporary World: Trends, Changes and Complexity. p. 1100-1104 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Developing a wheel motor controller for an actively steered bogie using co-simulation

  Zhao, Y., Goodall, R., Stow, J., Cooney, N. & Hawley, J., 22 Jan 2018, The Dynamics of Vehicles on Roads and Tracks: Proceedings of the 25th International Symposium on Dynamics of Vehicles on Roads and Tracks. Spiryagin, M., Gordon, T., Cole, C. & McSweeney, T. (eds.). CRC Press/Balkema, Vol. 2. p. 723-727 5 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Developing Professional identity in social work students in social media environments

  Miller, S., 6 Jul 2016, EDULEARN16 Proceedings: 8th International Conference on Education and New Learning Technologies. IATED Academy, p. 2241-2250 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Developing Shared Understanding through Simulation

  Hardiker, N. & Kay, S., 1999, Medical Informatics Europe '99. Kokol, P., Zupan, B., Stare, J., Premik, M. & Engelbrecht, R. (eds.). IOS Press, Vol. 68. p. 329-334 6 p. (Studies in Health Technology and Informatics).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• Developing Three-Dimensional CFD City Model Based on Public Accessible Information for Street-Level Wind Risk Assessment

  Miao, H. Y. & Shen, J. L., 2016, Proceedings of the 19th Australasian Fluid Mechanics Conference, AFMC 2014. Australasian Fluid Mechanics Society, Vol. 1. p. 1095-1098 4 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  2 Citations (Scopus)

• Developing viable biorefineries for the production of biodegradable microbial plastics and various added-value products

  Koutinas, A., Wang, R., Campbell, G. & Webb, C., 2005, 7th World Congress of Chemical Engineering, GLASGOW2005, incorporating the 5th European Congress of Chemical Engineering - Congress Manuscripts. p. 76 1 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Development and Characterization of Microcrystalline Cellulose Based Novel Multi-scale Biocomposites

  Rana, S., Parveen, S., Pichandi, S. & Fangueiro, R., 28 Nov 2017, Advances in Natural Fibre Composites: Raw Materials, Processing and Analysis. Fangueiro, R. & Rana, S. (eds.). 1st ed. Cham: Springer International Publishing, p. 159-173 15 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Development of a Computational Tool for the Dynamic Analysis of the Pantograph-Catenary Interaction for High-Speed Trains

  Antunes, P., Mósca, A., Ambrósio, J., Pombo, J. & Pereira, M., Sep 2012, Proceedings of the 11th International Conference on Computational Structures Technology, CST 2012. Topping, B. H. V. (ed.). Civil-Comp Press, 129. (Civil-Comp Proceedings; vol. 99).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Development of a Framework to Examine the Transportation Infrastructure Resilience: Sri Lankan Context

  Shehara, P. L. A. I., Siriwardana, C. S. A., Amaratunga, D. & Haigh, R., 25 Oct 2021, ICSBE 2020 - Proceedings of the 11th International Conference on Sustainable Built Environment. Dissanayake, R., Mendis, P., Weerasekera, K., De Silva, S. & Fernando, S. (eds.). Springer Singapore, Vol. 174. p. 235-258 24 p. (Lecture Notes in Civil Engineering; vol. 174).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
  1 Citation (Scopus)

• Development of a high redundancy actuation software demonstrator

  Davies, J., Goodall, R. M., Dixon, R. & Steffen, T., 1 Dec 2010, UKACC International Conference on CONTROL 2010. Burnham, K. J. & Ersanilli, V. E. (eds.). 4 ed. IEEE, Vol. 2010. p. 246-251 6 p. 0288

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Development of a Methodology for the Geometric Parameterization of Three-Dimensional Tracks

  Sequeira, B., Pombo, J., Antunes, P., Ambrósio, J. & Woodward, P., 1 Sep 2015, Proceedings of the Fifteenth International Conference on Civil, Structural and Environmental Engineering Computing. Krunis, J., Tsompanakis, Y. & Topping, B. H. V. (eds.). Civil-Comp Press, 133. (Civil-Comp Proceedings; vol. 108).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Development of an adaptive toolpath planning strategy for diamond face turning of freeform surfaces

  Zhong, W., Tong, Z., Chen, W. & Jiang, X., 2019, European Society for Precision Engineering and Nanotechnology, Conference Proceedings - 19th International Conference and Exhibition, EUSPEN 2019. Leach, R. K., Billington, D., Nisbet, C. & Phillips, D. (eds.). euspen, p. 126-127 2 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Development of an AM artefact to characterize unfused powder using computer tomography

  Tawfik, A., Bills, P., Blunt, L. & Racasan, R., 5 Jun 2018, Proceedings of the 18th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN): June 4th-8th 2018, Venice, IT. Riemer, O., Savio, E., Billington, D., Leach, R. K. & Phillips, D. (eds.). euspen, p. 97-98 2 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• Development of a new running gear for the spectrum intermodal vehicle

  Shackleton, P., Bezin, Y., Crosbee, D., Molyneux-Berry, P. & Kaushal, A., 3 May 2016, The Dynamics of Vehicles on Roads and Tracks: Proceedings of the 24th Symposium of the International Association for Vehicle System Dynamics, IAVSD 2015. Rosenberger, M., Plöchl, M., Six, K. & Edelmann, J. (eds.). CRC Press/Balkema, p. 1461-1470 10 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  1 Citation (Scopus)

• Development of an Experimental Waste Framework Based on Bim/Lean Concept in Construction Design

  Mollasalehi, S., Fleming, A., Talebi, S. & Underwood, J., 20 Jul 2016, Proceedings of the 24th Annual Conference of the International Group for Lean Construction. Pasquire, C. L., da C. L. Alves, T. & Reginato, J. M. (eds.). The International Group for Lean Construction, Vol. 1. p. 193-202 10 p. (Proceedings of the Annual Conference of the International Group for Lean Construction).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access
  14 Citations (Scopus)

• Development of an Extended Information Quality Framework for E-Learning System Content for Engineering Education Courses (EECs)

  Alseddiqi, M., Mishra, R. & Asim, T., Apr 2012, Learning with mobile technologies, handheld devices and smart phones: Innovative methods. Lu, Z. J. (ed.). IGI Global, p. 162-170 9 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Development of an instrument to measure students’ acceptance of technologically-enhanced personal, academic and professional development portfolios

  Ahmed, E. & Ward, R., 2015, INTED2015 Proceedings: 9th International Technology, Education and Development Conference. p. 2255-2265 11 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

• Development of an integrated connectedness model to evaluate the effectiveness of teaching and learning

  Al-Hamad, S., Kollar, L. E., Asim, T. & Mishra, R., 2016, Conference on e-Business, e-Services, and e-Society, I3E 2016, Proceedings: Social Media: The Good, the Bad, and the Ugly - 15th IFIP WG 6.11 . Springer Verlag, Vol. 9844. p. 707-716 10 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 9844).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• Development of an Optimisation Tool for the Mechanical Design of Permanent Magnet Rotors in High-Speed Electric Machines

  Mallin, L. & Barrans, S., 30 Aug 2021, Proceedings of 12th International Conference on Mechanical and Aerospace Engineering, ICMAE 2021. IEEE, p. 208-214 7 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

• Development of an ultra-precision grinding technique for the production of structured micro-patches on ceramics and tool steel

  Young, C., Blunt, L. & Tong, Z., 26 May 2017, Proceedings of the 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017. Phillips, D. (ed.). euspen, p. 207-208 2 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

• Development of a professional doctoral programme in built environment to enhance societal resilience to disasters

  Babatunde, S., Ginige, K., Adeniyi, O., Perera, S. & Amaratunga, D., 31 Jul 2016, Proceedings of the 5th World Construction Symposium: Greening Environment, Eco-Innovations & Entrepreneurship. Sandanayake, Y. G., Karunasena, G. I. & Ramachandra, T. (eds.). p. 153-161 9 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access

  File

• Development of a Real-time Punch Meter Plugin

  Parker, A., Fenton, S. & Lee, H., Sep 2018, Proceedings of the 4th Workshop on Intelligent Music Production. University of Huddersfield

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  Open Access

  File

• Development of a Tram-Train wheel profile for dual-operation running

  Crosbee, D., Allen, P. D. & Carroll, R., 21 Apr 2015, Stephenson Conference Research for Railways 2015. Institution of Mechanical Engineers, Vol. 2015-April. p. 95-110 16 p.

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

  Open Access