A Model-Based Iteration Method of the Estimation for the Bearings Dynamic Coefficients

Yang Kang; Zizhen Qiu; Hao Zhang; Zhanqun Shi; Fengshou Gu; Andrew Ball

doi:10.1007/978-3-030-75793-9_68

A Model-Based Iteration Method of the Estimation for the Bearings Dynamic Coefficients

Yang Kang, Zizhen Qiu, Hao Zhang, Zhanqun Shi, Fengshou Gu, Andrew Ball

Hebei University of Technology

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

The journal bearings are widely used in the high load rotation machine. The dynamic coefficients of the bearings a critical factor in the fault diagnosis of the system. In this paper, a model-based iteration method is described to identify the bearing dynamic coefficients. The model system is created firstly by the finite element method. Secondly, the principle of the method is proposed combining with the Kalman filter and Tikhonov’s regularisation method, which uses the theoretical dynamic coefficients to estimate the new bearing displacement in the horizontal and vertical directions using single measurement and then recalculate the dynamic coefficients. Finally, to verify this method, numerical simulations are carried out under different rotation speeds. The results show that this method has high confidence intervals in the identification of both stiffness and damping coefficients. This method would provide a new route for the identification of the bearing dynamic coefficients and dynamic analysis for the rotor-bearing system.

Original language	English
Title of host publication	Proceedings of IncoME-V & CEPE Net-2020
Subtitle of host publication	Condition Monitoring, Plant Maintenance and Reliability
Editors	Dong Zhen, Dong Wang, Tianyang Wang, Hongjun Wang, Baoshan Huang, Jyoti K. Sinha, Andrew David Ball
Publisher	Springer, Cham
Pages	709-717
Number of pages	9
Volume	105
Edition	1st
ISBN (Electronic)	9783030757939
ISBN (Print)	9783030757953, 9783030757922
DOIs	https://doi.org/10.1007/978-3-030-75793-9_68
Publication status	Published - 16 May 2021
Event	5th International Conference on Maintenance Engineering: IncoME-V and the 2020 Annual Conference of the Centre for Efficiency and Performance Engineering Network: IncoME-V & CEPE Net-2020 - Zhuhai, China Duration: 23 Oct 2020 → 25 Oct 2020 Conference number: 5

Publication series

Name	Mechanisms and Machine Science
Publisher	Springer
Volume	105
ISSN (Print)	2211-0984
ISSN (Electronic)	2211-0992

Conference

Conference	5th International Conference on Maintenance Engineering: IncoME-V and the 2020 Annual Conference of the Centre for Efficiency and Performance Engineering Network
Country/Territory	China
City	Zhuhai
Period	23/10/20 → 25/10/20

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 9 Industry, Innovation, and Infrastructure

Access to Document

10.1007/978-3-030-75793-9_68Licence: Unspecified

Cite this

Kang, Y., Qiu, Z., Zhang, H., Shi, Z., Gu, F., & Ball, A. (2021). A Model-Based Iteration Method of the Estimation for the Bearings Dynamic Coefficients. In D. Zhen, D. Wang, T. Wang, H. Wang, B. Huang, J. K. Sinha, & A. D. Ball (Eds.), Proceedings of IncoME-V & CEPE Net-2020: Condition Monitoring, Plant Maintenance and Reliability (1st ed., Vol. 105, pp. 709-717). (Mechanisms and Machine Science; Vol. 105). Springer, Cham. https://doi.org/10.1007/978-3-030-75793-9_68

Kang, Yang ; Qiu, Zizhen ; Zhang, Hao et al. / A Model-Based Iteration Method of the Estimation for the Bearings Dynamic Coefficients. Proceedings of IncoME-V & CEPE Net-2020: Condition Monitoring, Plant Maintenance and Reliability. editor / Dong Zhen ; Dong Wang ; Tianyang Wang ; Hongjun Wang ; Baoshan Huang ; Jyoti K. Sinha ; Andrew David Ball. Vol. 105 1st. ed. Springer, Cham, 2021. pp. 709-717 (Mechanisms and Machine Science).

@inproceedings{6a475753fd3d45f78b64ec31ba9a7519,

title = "A Model-Based Iteration Method of the Estimation for the Bearings Dynamic Coefficients",

abstract = "The journal bearings are widely used in the high load rotation machine. The dynamic coefficients of the bearings a critical factor in the fault diagnosis of the system. In this paper, a model-based iteration method is described to identify the bearing dynamic coefficients. The model system is created firstly by the finite element method. Secondly, the principle of the method is proposed combining with the Kalman filter and Tikhonov{\textquoteright}s regularisation method, which uses the theoretical dynamic coefficients to estimate the new bearing displacement in the horizontal and vertical directions using single measurement and then recalculate the dynamic coefficients. Finally, to verify this method, numerical simulations are carried out under different rotation speeds. The results show that this method has high confidence intervals in the identification of both stiffness and damping coefficients. This method would provide a new route for the identification of the bearing dynamic coefficients and dynamic analysis for the rotor-bearing system.",

keywords = "Displacements, Dynamic coefficients identification, Journal bearings, Tikhonov{\textquoteright}s regularisation method",

author = "Yang Kang and Zizhen Qiu and Hao Zhang and Zhanqun Shi and Fengshou Gu and Andrew Ball",

note = "Funding Information: Acknowledgements. This research was financially supported by the National Natural Science Foundation of China (Grant no. 51705127, 51875166), China Scholarship Council (201906700007). Publisher Copyright: {\textcopyright} 2021, The Author(s), under exclusive license to Springer Nature Switzerland AG. Copyright: Copyright 2021 Elsevier B.V., All rights reserved.; 5th International Conference on Maintenance Engineering: IncoME-V and the 2020 Annual Conference of the Centre for Efficiency and Performance Engineering Network : IncoME-V \& CEPE Net-2020 ; Conference date: 23-10-2020 Through 25-10-2020",

year = "2021",

month = may,

day = "16",

doi = "10.1007/978-3-030-75793-9\_68",

language = "English",

isbn = "9783030757953",

volume = "105",

series = "Mechanisms and Machine Science",

publisher = "Springer, Cham",

pages = "709--717",

editor = "Dong Zhen and Dong Wang and Tianyang Wang and Hongjun Wang and Baoshan Huang and Sinha, \{Jyoti K.\} and Ball, \{Andrew David\}",

booktitle = "Proceedings of IncoME-V \& CEPE Net-2020",

address = "Switzerland",

edition = "1st",

}

Kang, Y, Qiu, Z, Zhang, H, Shi, Z, Gu, F & Ball, A 2021, A Model-Based Iteration Method of the Estimation for the Bearings Dynamic Coefficients. in D Zhen, D Wang, T Wang, H Wang, B Huang, JK Sinha & AD Ball (eds), Proceedings of IncoME-V & CEPE Net-2020: Condition Monitoring, Plant Maintenance and Reliability. 1st edn, vol. 105, Mechanisms and Machine Science, vol. 105, Springer, Cham, pp. 709-717, 5th International Conference on Maintenance Engineering: IncoME-V and the 2020 Annual Conference of the Centre for Efficiency and Performance Engineering Network, Zhuhai, China, 23/10/20. https://doi.org/10.1007/978-3-030-75793-9_68

A Model-Based Iteration Method of the Estimation for the Bearings Dynamic Coefficients. / Kang, Yang; Qiu, Zizhen; Zhang, Hao et al.
Proceedings of IncoME-V & CEPE Net-2020: Condition Monitoring, Plant Maintenance and Reliability. ed. / Dong Zhen; Dong Wang; Tianyang Wang; Hongjun Wang; Baoshan Huang; Jyoti K. Sinha; Andrew David Ball. Vol. 105 1st. ed. Springer, Cham, 2021. p. 709-717 (Mechanisms and Machine Science; Vol. 105).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - A Model-Based Iteration Method of the Estimation for the Bearings Dynamic Coefficients

AU - Kang, Yang

AU - Qiu, Zizhen

AU - Zhang, Hao

AU - Shi, Zhanqun

AU - Gu, Fengshou

AU - Ball, Andrew

N1 - Conference code: 5

PY - 2021/5/16

Y1 - 2021/5/16

N2 - The journal bearings are widely used in the high load rotation machine. The dynamic coefficients of the bearings a critical factor in the fault diagnosis of the system. In this paper, a model-based iteration method is described to identify the bearing dynamic coefficients. The model system is created firstly by the finite element method. Secondly, the principle of the method is proposed combining with the Kalman filter and Tikhonov’s regularisation method, which uses the theoretical dynamic coefficients to estimate the new bearing displacement in the horizontal and vertical directions using single measurement and then recalculate the dynamic coefficients. Finally, to verify this method, numerical simulations are carried out under different rotation speeds. The results show that this method has high confidence intervals in the identification of both stiffness and damping coefficients. This method would provide a new route for the identification of the bearing dynamic coefficients and dynamic analysis for the rotor-bearing system.

AB - The journal bearings are widely used in the high load rotation machine. The dynamic coefficients of the bearings a critical factor in the fault diagnosis of the system. In this paper, a model-based iteration method is described to identify the bearing dynamic coefficients. The model system is created firstly by the finite element method. Secondly, the principle of the method is proposed combining with the Kalman filter and Tikhonov’s regularisation method, which uses the theoretical dynamic coefficients to estimate the new bearing displacement in the horizontal and vertical directions using single measurement and then recalculate the dynamic coefficients. Finally, to verify this method, numerical simulations are carried out under different rotation speeds. The results show that this method has high confidence intervals in the identification of both stiffness and damping coefficients. This method would provide a new route for the identification of the bearing dynamic coefficients and dynamic analysis for the rotor-bearing system.

KW - Displacements

KW - Dynamic coefficients identification

KW - Journal bearings

KW - Tikhonov’s regularisation method

UR - https://www.scopus.com/pages/publications/85105976653

UR - https://www.springer.com/gp/book/9783030757922

U2 - 10.1007/978-3-030-75793-9_68

DO - 10.1007/978-3-030-75793-9_68

M3 - Conference contribution

AN - SCOPUS:85105976653

SN - 9783030757953

SN - 9783030757922

VL - 105

T3 - Mechanisms and Machine Science

SP - 709

EP - 717

BT - Proceedings of IncoME-V & CEPE Net-2020

A2 - Zhen, Dong

A2 - Wang, Dong

A2 - Wang, Tianyang

A2 - Wang, Hongjun

A2 - Huang, Baoshan

A2 - Sinha, Jyoti K.

A2 - Ball, Andrew David

PB - Springer, Cham

T2 - 5th International Conference on Maintenance Engineering: IncoME-V and the 2020 Annual Conference of the Centre for Efficiency and Performance Engineering Network

Y2 - 23 October 2020 through 25 October 2020

ER -

Kang Y, Qiu Z, Zhang H, Shi Z, Gu F , Ball A. A Model-Based Iteration Method of the Estimation for the Bearings Dynamic Coefficients. In Zhen D, Wang D, Wang T, Wang H, Huang B, Sinha JK, Ball AD, editors, Proceedings of IncoME-V & CEPE Net-2020: Condition Monitoring, Plant Maintenance and Reliability. 1st ed. Vol. 105. Springer, Cham. 2021. p. 709-717. (Mechanisms and Machine Science). doi: 10.1007/978-3-030-75793-9_68

A Model-Based Iteration Method of the Estimation for the Bearings Dynamic Coefficients

Abstract

Publication series

Conference

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this