Calibration of an Interferometric Surface Measurement System on an Ultra-Precision Turning Lathe

Duo Li; Xiangqian Jiang; Liam Blunt; Zhen Tong; Fei Ding

Calibration of an Interferometric Surface Measurement System on an Ultra-Precision Turning Lathe

Duo Li, Xiangqian Jiang, Liam Blunt, Zhen Tong, Fei Ding

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

On-machine measurement avoids the time-consuming transposition operations between the measurement and machine coordinates. The present work integrates an interferometric probing system on an ultra-precision turning machine. Due to the relatively harsh environment in the machine tools, metrological characteristics of the surface measurement instrument would deviate from those tested under standard laboratory conditions. In order to improve the performance of on-machine measurement systems, it is necessary to calibrate the on-machine measurement (OMM) system and compensate for any systematic errors. Three key issues, including on-machine vibration, machine tool kinematics error, and linearity error are discussed in this study. Experimental investigation is conducted to prove the validity of proposed calibration methodology and the effectiveness of on-machine measurement.

Original language	English
Title of host publication	Laser Metrology and Machine Performance XII - 12th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2017
Publisher	euspen
Pages	252-255
Number of pages	4
ISBN (Electronic)	9780956679093
Publication status	Published - 1 Jan 2017
Event	12th International Conference and Exhibition on Laser Metrology, Coordinate Measuring Machine and Machine Tool Performance - Renishaw Innovation Centre, Wotton-under-Edge, United Kingdom Duration: 15 Mar 2017 → 16 Mar 2017 Conference number: 12 http://www.euspen.eu/events/lamdamap-12th-international-conference-exhibition/ (Link to Conference Details ) https://www.euspen.eu/our-events/lamdamap-programme/ (Link to Event Details) https://www.euspen.eu/wp-content/uploads/2017/03/Programme-delegates.pdf (Programme)

Conference

Conference	12th International Conference and Exhibition on Laser Metrology, Coordinate Measuring Machine and Machine Tool Performance
Abbreviated title	LAMDAMAP 2017
Country/Territory	United Kingdom
City	Wotton-under-Edge
Period	15/03/17 → 16/03/17
Internet address	http://www.euspen.eu/events/lamdamap-12th-international-conference-exhibition/ (Link to Conference Details ) https://www.euspen.eu/our-events/lamdamap-programme/ (Link to Event Details) https://www.euspen.eu/wp-content/uploads/2017/03/Programme-delegates.pdf (Programme)

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Cite this

@inproceedings{4e1ab364bbff4b58b9c708d5fb8dc14e,

title = "Calibration of an Interferometric Surface Measurement System on an Ultra-Precision Turning Lathe",

abstract = "On-machine measurement avoids the time-consuming transposition operations between the measurement and machine coordinates. The present work integrates an interferometric probing system on an ultra-precision turning machine. Due to the relatively harsh environment in the machine tools, metrological characteristics of the surface measurement instrument would deviate from those tested under standard laboratory conditions. In order to improve the performance of on-machine measurement systems, it is necessary to calibrate the on-machine measurement (OMM) system and compensate for any systematic errors. Three key issues, including on-machine vibration, machine tool kinematics error, and linearity error are discussed in this study. Experimental investigation is conducted to prove the validity of proposed calibration methodology and the effectiveness of on-machine measurement.",

author = "Duo Li and Xiangqian Jiang and Liam Blunt and Zhen Tong and Fei Ding",

year = "2017",

month = jan,

day = "1",

language = "English",

pages = "252--255",

booktitle = "Laser Metrology and Machine Performance XII - 12th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2017",

publisher = "euspen",

address = "United Kingdom",

note = "12th International Conference and Exhibition on Laser Metrology, Coordinate Measuring Machine and Machine Tool Performance, LAMDAMAP 2017 ; Conference date: 15-03-2017 Through 16-03-2017",

url = "http://www.euspen.eu/events/lamdamap-12th-international-conference-exhibition/, https://www.euspen.eu/our-events/lamdamap-programme/, https://www.euspen.eu/wp-content/uploads/2017/03/Programme-delegates.pdf",

}

Li, D, Jiang, X , Blunt, L, Tong, Z & Ding, F 2017, Calibration of an Interferometric Surface Measurement System on an Ultra-Precision Turning Lathe. in Laser Metrology and Machine Performance XII - 12th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2017. euspen, pp. 252-255, 12th International Conference and Exhibition on Laser Metrology, Coordinate Measuring Machine and Machine Tool Performance, Wotton-under-Edge, United Kingdom, 15/03/17.

Calibration of an Interferometric Surface Measurement System on an Ultra-Precision Turning Lathe. / Li, Duo; Jiang, Xiangqian ; Blunt, Liam et al.

Laser Metrology and Machine Performance XII - 12th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2017. euspen, 2017. p. 252-255.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Calibration of an Interferometric Surface Measurement System on an Ultra-Precision Turning Lathe

AU - Li, Duo

AU - Jiang, Xiangqian

AU - Blunt, Liam

AU - Tong, Zhen

AU - Ding, Fei

N1 - Conference code: 12

PY - 2017/1/1

Y1 - 2017/1/1

N2 - On-machine measurement avoids the time-consuming transposition operations between the measurement and machine coordinates. The present work integrates an interferometric probing system on an ultra-precision turning machine. Due to the relatively harsh environment in the machine tools, metrological characteristics of the surface measurement instrument would deviate from those tested under standard laboratory conditions. In order to improve the performance of on-machine measurement systems, it is necessary to calibrate the on-machine measurement (OMM) system and compensate for any systematic errors. Three key issues, including on-machine vibration, machine tool kinematics error, and linearity error are discussed in this study. Experimental investigation is conducted to prove the validity of proposed calibration methodology and the effectiveness of on-machine measurement.

AB - On-machine measurement avoids the time-consuming transposition operations between the measurement and machine coordinates. The present work integrates an interferometric probing system on an ultra-precision turning machine. Due to the relatively harsh environment in the machine tools, metrological characteristics of the surface measurement instrument would deviate from those tested under standard laboratory conditions. In order to improve the performance of on-machine measurement systems, it is necessary to calibrate the on-machine measurement (OMM) system and compensate for any systematic errors. Three key issues, including on-machine vibration, machine tool kinematics error, and linearity error are discussed in this study. Experimental investigation is conducted to prove the validity of proposed calibration methodology and the effectiveness of on-machine measurement.

UR - http://www.scopus.com/inward/record.url?scp=85043386090&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:85043386090

SP - 252

EP - 255

BT - Laser Metrology and Machine Performance XII - 12th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2017

PB - euspen

T2 - 12th International Conference and Exhibition on Laser Metrology, Coordinate Measuring Machine and Machine Tool Performance

Y2 - 15 March 2017 through 16 March 2017

ER -

Calibration of an Interferometric Surface Measurement System on an Ultra-Precision Turning Lathe

Abstract

Conference

UN SDGs

Other files and links

Fingerprint