Current Control of Nine-Switch Inverter Using Integrated Current Sensors

S. M. Dehghan; M. Mohamadian; A. Yazdian

doi:10.1109/PEOCO.2010.5559228

Current Control of Nine-Switch Inverter Using Integrated Current Sensors

S. M. Dehghan, M. Mohamadian, A. Yazdian

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3 Citations (Scopus)

Abstract

Recently nine-switch inverter (NSI) has been presented as a dual-output inverter with only nine semiconductor switches. This inverter can be used to control two ac loads such as electric motors, independently. While external current sensors are usually in closed loop control of inverter, this paper proposes using power semiconductor switches that include integrated pilot current sensors as mid switches of nine-switch inverter. In this manner, using only three integrated current sensors, both outputs of nine-switch inverter can be controlled. Since integrated current sensors can not cover current in each phase during the whole fundamental cycle, a reconstruction algorithm is proposed for calculation of non-measurable currents. Performance of the proposed method is verified by simulation results.

Original language	English
Title of host publication	PEOCO 2010 - 4th International Power Engineering and Optimization Conference, Program and Abstracts
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	95-100
Number of pages	6
ISBN (Electronic)	9781424471287
ISBN (Print)	9781424471270
DOIs	https://doi.org/10.1109/PEOCO.2010.5559228
Publication status	Published - 30 Aug 2010
Externally published	Yes
Event	4th International Power Engineering and Optimization Conference - Shah Alam, Malaysia Duration: 23 Jun 2010 → 24 Jun 2010 Conference number: 4

Conference

Conference	4th International Power Engineering and Optimization Conference
Abbreviated title	PEOCO 2010
Country/Territory	Malaysia
City	Shah Alam
Period	23/06/10 → 24/06/10

Access to Document

10.1109/PEOCO.2010.5559228Licence: Unspecified

Cite this

@inproceedings{b095ee4b6be74afb979c59021cfa58ba,

title = "Current Control of Nine-Switch Inverter Using Integrated Current Sensors",

abstract = "Recently nine-switch inverter (NSI) has been presented as a dual-output inverter with only nine semiconductor switches. This inverter can be used to control two ac loads such as electric motors, independently. While external current sensors are usually in closed loop control of inverter, this paper proposes using power semiconductor switches that include integrated pilot current sensors as mid switches of nine-switch inverter. In this manner, using only three integrated current sensors, both outputs of nine-switch inverter can be controlled. Since integrated current sensors can not cover current in each phase during the whole fundamental cycle, a reconstruction algorithm is proposed for calculation of non-measurable currents. Performance of the proposed method is verified by simulation results.",

keywords = "Current sensor, Integrated current sensor, Nine-switch inverter, Pilot sensor",

author = "Dehghan, {S. M.} and M. Mohamadian and A. Yazdian",

year = "2010",

month = aug,

day = "30",

doi = "10.1109/PEOCO.2010.5559228",

language = "English",

isbn = "9781424471270",

pages = "95--100",

booktitle = "PEOCO 2010 - 4th International Power Engineering and Optimization Conference, Program and Abstracts",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

address = "United States",

note = "4th International Power Engineering and Optimization Conference, PEOCO 2010 ; Conference date: 23-06-2010 Through 24-06-2010",

}

Dehghan, SM, Mohamadian, M & Yazdian, A 2010, Current Control of Nine-Switch Inverter Using Integrated Current Sensors. in PEOCO 2010 - 4th International Power Engineering and Optimization Conference, Program and Abstracts., 5559228, Institute of Electrical and Electronics Engineers Inc., pp. 95-100, 4th International Power Engineering and Optimization Conference, Shah Alam, Malaysia, 23/06/10. https://doi.org/10.1109/PEOCO.2010.5559228

Current Control of Nine-Switch Inverter Using Integrated Current Sensors. / Dehghan, S. M.; Mohamadian, M.; Yazdian, A.

PEOCO 2010 - 4th International Power Engineering and Optimization Conference, Program and Abstracts. Institute of Electrical and Electronics Engineers Inc., 2010. p. 95-100 5559228.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Current Control of Nine-Switch Inverter Using Integrated Current Sensors

AU - Dehghan, S. M.

AU - Mohamadian, M.

AU - Yazdian, A.

N1 - Conference code: 4

PY - 2010/8/30

Y1 - 2010/8/30

N2 - Recently nine-switch inverter (NSI) has been presented as a dual-output inverter with only nine semiconductor switches. This inverter can be used to control two ac loads such as electric motors, independently. While external current sensors are usually in closed loop control of inverter, this paper proposes using power semiconductor switches that include integrated pilot current sensors as mid switches of nine-switch inverter. In this manner, using only three integrated current sensors, both outputs of nine-switch inverter can be controlled. Since integrated current sensors can not cover current in each phase during the whole fundamental cycle, a reconstruction algorithm is proposed for calculation of non-measurable currents. Performance of the proposed method is verified by simulation results.

AB - Recently nine-switch inverter (NSI) has been presented as a dual-output inverter with only nine semiconductor switches. This inverter can be used to control two ac loads such as electric motors, independently. While external current sensors are usually in closed loop control of inverter, this paper proposes using power semiconductor switches that include integrated pilot current sensors as mid switches of nine-switch inverter. In this manner, using only three integrated current sensors, both outputs of nine-switch inverter can be controlled. Since integrated current sensors can not cover current in each phase during the whole fundamental cycle, a reconstruction algorithm is proposed for calculation of non-measurable currents. Performance of the proposed method is verified by simulation results.

KW - Current sensor

KW - Integrated current sensor

KW - Nine-switch inverter

KW - Pilot sensor

UR - http://www.scopus.com/inward/record.url?scp=77958001307&partnerID=8YFLogxK

U2 - 10.1109/PEOCO.2010.5559228

DO - 10.1109/PEOCO.2010.5559228

M3 - Conference contribution

AN - SCOPUS:77958001307

SN - 9781424471270

SP - 95

EP - 100

BT - PEOCO 2010 - 4th International Power Engineering and Optimization Conference, Program and Abstracts

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 4th International Power Engineering and Optimization Conference

Y2 - 23 June 2010 through 24 June 2010

ER -

Current Control of Nine-Switch Inverter Using Integrated Current Sensors

Abstract

Conference

Access to Document

Other files and links

Fingerprint

Cite this