Design and Implementation of a Data Processing and Visualization System for STEP-NC Programs

Riliang Liu; Xianzhi Zhang; Chengrui Zhang

doi:10.4028/www.scientific.net/AMM.16-19.1015

Design and Implementation of a Data Processing and Visualization System for STEP-NC Programs

Riliang Liu, Xianzhi Zhang, Chengrui Zhang

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

Abstract

Over the last decade a new data interface for CAM/CNC integration has been established to replace ISO 6983. The new standard, ISO 14649 (STEP-NC), provides a comprehensive data model that describes both geometrical and technological information in an object-oriented way. In order to bridge the gap between such rich-information programs and the legacy CNC systems, this paper presents a framework for manipulating the manufacturing data in STEP-NC part programs. The proposed system provides a basic platform for STEP-NC program interpretation, geometry visualization, micro-process planning and program re-generation. Major issues relating to the realization of manufacturing information extraction and shop-floor-level process planning are addressed in particular, and a prototype for STEP-NC turning process is implemented to demonstrate the feasibility of the approach.

Original language	English
Title of host publication	e-Engineering and Digital Enterprise Technology VII
Editors	Kai Cheng, Yongxian Liu, Xipeng Xu, Hualong Xie
Publisher	Trans Tech Publications Ltd
Pages	1015-1019
Number of pages	5
Volume	1
ISBN (Electronic)	9783038132950
ISBN (Print)	0878492992, 9780878492992
DOIs	https://doi.org/10.4028/www.scientific.net/AMM.16-19.1015
Publication status	Published - 2009
Externally published	Yes
Event	7th International Conference on e-Engineering and Digital Enterprise Technology - Shenyang, China Duration: 3 Sep 2009 → 5 Sep 2009 Conference number: 7 https://www.tib.eu/en/search/id/TIBKAT%3A642601275/

Publication series

Name	Applied Mechanics and Materials
Volume	16-19
ISSN (Print)	1660-9336
ISSN (Electronic)	1662-7482

Conference

Conference	7th International Conference on e-Engineering and Digital Enterprise Technology
Country/Territory	China
City	Shenyang
Period	3/09/09 → 5/09/09
Internet address	https://www.tib.eu/en/search/id/TIBKAT%3A642601275/

Access to Document

10.4028/www.scientific.net/AMM.16-19.1015Licence: Unspecified

Cite this

Liu, R., Zhang, X., & Zhang, C. (2009). Design and Implementation of a Data Processing and Visualization System for STEP-NC Programs. In K. Cheng, Y. Liu, X. Xu, & H. Xie (Eds.), e-Engineering and Digital Enterprise Technology VII (Vol. 1, pp. 1015-1019). (Applied Mechanics and Materials; Vol. 16-19). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/AMM.16-19.1015

@inproceedings{94220d5600f24cb38d6ed465d8a66281,

title = "Design and Implementation of a Data Processing and Visualization System for STEP-NC Programs",

abstract = "Over the last decade a new data interface for CAM/CNC integration has been established to replace ISO 6983. The new standard, ISO 14649 (STEP-NC), provides a comprehensive data model that describes both geometrical and technological information in an object-oriented way. In order to bridge the gap between such rich-information programs and the legacy CNC systems, this paper presents a framework for manipulating the manufacturing data in STEP-NC part programs. The proposed system provides a basic platform for STEP-NC program interpretation, geometry visualization, micro-process planning and program re-generation. Major issues relating to the realization of manufacturing information extraction and shop-floor-level process planning are addressed in particular, and a prototype for STEP-NC turning process is implemented to demonstrate the feasibility of the approach.",

keywords = "CAM/CNC, NC programming, STEP-NC, Turning process",

author = "Riliang Liu and Xianzhi Zhang and Chengrui Zhang",

year = "2009",

doi = "10.4028/www.scientific.net/AMM.16-19.1015",

language = "English",

isbn = "0878492992",

volume = "1",

series = "Applied Mechanics and Materials",

publisher = "Trans Tech Publications Ltd",

pages = "1015--1019",

editor = "Kai Cheng and Yongxian Liu and Xipeng Xu and Hualong Xie",

booktitle = "e-Engineering and Digital Enterprise Technology VII",

address = "Switzerland",

note = "7th International Conference on e-Engineering and Digital Enterprise Technology ; Conference date: 03-09-2009 Through 05-09-2009",

url = "https://www.tib.eu/en/search/id/TIBKAT%3A642601275/",

}

Liu, R, Zhang, X & Zhang, C 2009, Design and Implementation of a Data Processing and Visualization System for STEP-NC Programs. in K Cheng, Y Liu, X Xu & H Xie (eds), e-Engineering and Digital Enterprise Technology VII. vol. 1, Applied Mechanics and Materials, vol. 16-19, Trans Tech Publications Ltd, pp. 1015-1019, 7th International Conference on e-Engineering and Digital Enterprise Technology, Shenyang, China, 3/09/09. https://doi.org/10.4028/www.scientific.net/AMM.16-19.1015

Design and Implementation of a Data Processing and Visualization System for STEP-NC Programs. / Liu, Riliang; Zhang, Xianzhi; Zhang, Chengrui.

e-Engineering and Digital Enterprise Technology VII. ed. / Kai Cheng; Yongxian Liu; Xipeng Xu; Hualong Xie. Vol. 1 Trans Tech Publications Ltd, 2009. p. 1015-1019 (Applied Mechanics and Materials; Vol. 16-19).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Design and Implementation of a Data Processing and Visualization System for STEP-NC Programs

AU - Liu, Riliang

AU - Zhang, Xianzhi

AU - Zhang, Chengrui

N1 - Conference code: 7

PY - 2009

Y1 - 2009

N2 - Over the last decade a new data interface for CAM/CNC integration has been established to replace ISO 6983. The new standard, ISO 14649 (STEP-NC), provides a comprehensive data model that describes both geometrical and technological information in an object-oriented way. In order to bridge the gap between such rich-information programs and the legacy CNC systems, this paper presents a framework for manipulating the manufacturing data in STEP-NC part programs. The proposed system provides a basic platform for STEP-NC program interpretation, geometry visualization, micro-process planning and program re-generation. Major issues relating to the realization of manufacturing information extraction and shop-floor-level process planning are addressed in particular, and a prototype for STEP-NC turning process is implemented to demonstrate the feasibility of the approach.

AB - Over the last decade a new data interface for CAM/CNC integration has been established to replace ISO 6983. The new standard, ISO 14649 (STEP-NC), provides a comprehensive data model that describes both geometrical and technological information in an object-oriented way. In order to bridge the gap between such rich-information programs and the legacy CNC systems, this paper presents a framework for manipulating the manufacturing data in STEP-NC part programs. The proposed system provides a basic platform for STEP-NC program interpretation, geometry visualization, micro-process planning and program re-generation. Major issues relating to the realization of manufacturing information extraction and shop-floor-level process planning are addressed in particular, and a prototype for STEP-NC turning process is implemented to demonstrate the feasibility of the approach.

KW - CAM/CNC

KW - NC programming

KW - STEP-NC

KW - Turning process

UR - http://www.scopus.com/inward/record.url?scp=73949106210&partnerID=8YFLogxK

UR - https://www.scientific.net/book/e-engineering-digital-enterprise-technology-vii/978-3-03813-295-0

U2 - 10.4028/www.scientific.net/AMM.16-19.1015

DO - 10.4028/www.scientific.net/AMM.16-19.1015

M3 - Conference contribution

AN - SCOPUS:73949106210

SN - 0878492992

SN - 9780878492992

VL - 1

T3 - Applied Mechanics and Materials

SP - 1015

EP - 1019

BT - e-Engineering and Digital Enterprise Technology VII

A2 - Cheng, Kai

A2 - Liu, Yongxian

A2 - Xu, Xipeng

A2 - Xie, Hualong

PB - Trans Tech Publications Ltd

T2 - 7th International Conference on e-Engineering and Digital Enterprise Technology

Y2 - 3 September 2009 through 5 September 2009

ER -

Design and Implementation of a Data Processing and Visualization System for STEP-NC Programs

Abstract

Publication series

Conference

Access to Document

Other files and links

Fingerprint