Downhole Steam Generation for Green Heavy Oil Recovery

Abdulsallam Al-Mashrafi, Mahmood Fani, Faisal Asfand, Mahmood Amani, Mohsen Assadi, Nader Mosavat

Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review


The ultimate target of heavy oil recovery is to enhance oil mobility by transferring steam's thermal energy to the oil phase, incrementing its temperature, and reducing heavy oil's viscosity. While the various types of steam floods such as Cyclic Steam Injection (CSI) and Steam-Assisted Gravity Drainage (SAGD) are widely used worldwide, they have certain limitations that need further improvements. Notably, in surface steam generation systems, downhole steam quality is around 70% which means that 30% of latent heat is lost while steam travels from the surface to the pre-determined downhole location. Downhole steam generation (DHSG) can be a viable alternative for the surface steam injection in which steam will be generated downhole instead of on the surface. The asserted method presents significant benefits such as preventing steam quality loss, decreasing the environmental effects, and enhancing the heavy oil recovery by co-injecting the flue gas products such as CO2, and consequently, the economic outcomes will be increased. In this research, a comprehensive techno-economic case study has been conducted on a heavy oil reservoir to evaluate the economic and technical advantages of DHSG compared to surface steam generation. Various technical expenses and revenues such as investment costs, operating costs, royalties, and taxes have been considered in a simulation model in MATLAB. This DHSG feasibility assessment has been performed using data of a heavy oil reserve currently under steam flood. Results showed that DHSG could increase up to 50% economic and technical interest than conventional steam injection projects. One of the outstanding benefits of DHSG is the reduction of heat loss. Since steam is produced in-situ, either downhole or in the reservoir, no waste of heat occurs. Typically, most heat losses happen on surface lines and wellbore during steam injection from the surface, which accounts for approximately 32%. Thus, this issue is excluded using the DHSG method. The results of the recent effort fit well into the current industry's requirements. DHSG can (1) increase the rate of heavy oil production, (2) decrease the extra expenses, and (3) dwindle the environmental side effects of CO2 emission of surface steam generation. Compared with conventional thermal methods, in DHSG, the steam to oil ratio remains constant with depth change while the desired steam quality can be achieved at any location. The asserted benefits can ultimately optimize the steam injection with a significant reduction in UTC, hence, improved profitability.

Original languageEnglish
Title of host publicationSociety of Petroleum Engineers - Abu Dhabi International Petroleum Exhibition and Conference, ADIP 2021
PublisherSociety of Petroleum Engineers (SPE)
ISBN (Electronic)9781613998342
Publication statusPublished - 9 Dec 2021
Externally publishedYes
Event2021 Abu Dhabi International Petroleum Exhibition and Conference - Abu Dhabi, United Arab Emirates
Duration: 15 Nov 202118 Nov 2021


Conference2021 Abu Dhabi International Petroleum Exhibition and Conference
Abbreviated titleADIP 2021
Country/TerritoryUnited Arab Emirates
CityAbu Dhabi


Dive into the research topics of 'Downhole Steam Generation for Green Heavy Oil Recovery'. Together they form a unique fingerprint.

Cite this