TY - JOUR
T1 - Electrochemical Decoration of Additively Manufactured Graphene Macroelectrodes with MoO2Nanowires
T2 - An Approach to Demonstrate the Surface Morphology
AU - Slate, Anthony J.
AU - Whitehead, Kathryn A.
AU - Lynch, Stephen
AU - Foster, Christopher W.
AU - Banks, Craig E.
N1 - Funding Information:
This research was funded by the Manchester Metropolitan University. Funding from the Engineering and Physical Sciences Research Council is recognized (Reference: EP/N001877/1).
Publisher Copyright:
Copyright © 2020 American Chemical Society.
PY - 2020/7/16
Y1 - 2020/7/16
N2 - Additive manufacturing (AM) provides a unique platform for the rapid design and fabrication of complex structures. Printed structures can be used as is or as templates to be decorated with electrochemically deposited nanomaterials, which may be utilized as electrocatalytic sensing platforms. Novel methods are required to determine the electrochemical deposition morphology present on the electrode surfaces. Additively manufactured graphene macroelectrodes (AM-GMs) were fabricated using a commercially available feedstock and molybdenum dioxide (MoO2) was successfully electrochemically deposited onto the electrode surface. The electrochemically deposited MoO2 was analyzed using scanning electron microscopy (SEM), optical interferometry, Raman spectroscopy, and multifractal analysis (MFA). Although the electrochemical deposition of MoO2 nanowires was clearly visible using SEM, MFA enabled quantification of the MoO2 nanowires deposited at various time points (20-300 s). MFA was utilized to generate quantitative data, derived from f(α) curves, to determine the area of the electrochemically deposited MoO2 nanowires, including coverage, density, dispersion, and clustering. The AM-GMs, which were subjected to 300 s (maximum time period) of MoO2 electrodeposition, demonstrated the greatest percentage area coverage (20.14%). The use of such mathematical systems offers an inexpensive method to characterize the parameters of electrochemically deposited materials.
AB - Additive manufacturing (AM) provides a unique platform for the rapid design and fabrication of complex structures. Printed structures can be used as is or as templates to be decorated with electrochemically deposited nanomaterials, which may be utilized as electrocatalytic sensing platforms. Novel methods are required to determine the electrochemical deposition morphology present on the electrode surfaces. Additively manufactured graphene macroelectrodes (AM-GMs) were fabricated using a commercially available feedstock and molybdenum dioxide (MoO2) was successfully electrochemically deposited onto the electrode surface. The electrochemically deposited MoO2 was analyzed using scanning electron microscopy (SEM), optical interferometry, Raman spectroscopy, and multifractal analysis (MFA). Although the electrochemical deposition of MoO2 nanowires was clearly visible using SEM, MFA enabled quantification of the MoO2 nanowires deposited at various time points (20-300 s). MFA was utilized to generate quantitative data, derived from f(α) curves, to determine the area of the electrochemically deposited MoO2 nanowires, including coverage, density, dispersion, and clustering. The AM-GMs, which were subjected to 300 s (maximum time period) of MoO2 electrodeposition, demonstrated the greatest percentage area coverage (20.14%). The use of such mathematical systems offers an inexpensive method to characterize the parameters of electrochemically deposited materials.
KW - Deposition
KW - electrodeposition
KW - electrodes
KW - nanowires
KW - two dimensional materials
UR - http://www.scopus.com/inward/record.url?scp=85089263532&partnerID=8YFLogxK
U2 - 10.1021/acs.jpcc.0c04532
DO - 10.1021/acs.jpcc.0c04532
M3 - Article
AN - SCOPUS:85089263532
VL - 124
SP - 15377
EP - 15385
JO - Journal of Physical Chemistry C
JF - Journal of Physical Chemistry C
SN - 1932-7447
IS - 28
ER -