Engineering of acidic O/W emulsions with pectin

K. Alba, L. M C Sagis, V. Kontogiorgos

Research output: Contribution to journalArticle

19 Citations (Scopus)

Abstract

Pectins with distinct molecular design were isolated by aqueous extraction at pH 2.0 or 6.0 and were examined in terms of their formation and stabilisation capacity of model n-alkane-in-water emulsions at acidic pH (pH 2.0). The properties and stability of the resulting emulsions were examined by means of droplet size distribution analysis, Lifshitz-Slyozov-Wagner modelling, bulk rheology, interfacial composition analysis, large-amplitude oscillatory surface dilatational rheology, electrokinetic analysis and fluorescence microscopy. Both pectin preparations were able to emulsify alkanes in water but exhibited distinct ageing characteristics. Emulsions prepared using pectin isolated at pH 6.0 were remarkably stable with respect to droplet growth after thirty days of ageing, while those prepared with pectin isolated at pH 2.0 destabilised rapidly. Examination of chemical composition of interfacial layers indicated multi-layered adsorption of pectins at the oil-water interface. The higher long-term stability of emulsions prepared with pectin isolated at high pH is attributed to mechanically stronger interfaces, the highly branched nature and the low hydrodynamic volume of the chains that result in effective steric stabilisation whereas acetyl and methyl contents do not contribute to the long-term stability. The present work shows that it is possible by tailoring the fine structure of pectin to engineer emulsions that operate in acidic environments.

LanguageEnglish
Pages301-308
Number of pages8
JournalColloids and Surfaces B: Biointerfaces
Volume145
Early online date6 May 2016
DOIs
Publication statusPublished - 1 Sep 2016

Fingerprint

Emulsions
emulsions
engineering
Pectins
Alkanes
Rheology
Paraffins
Water
rheology
Stabilization
alkanes
Aging of materials
stabilization
water
Fluorescence microscopy
Chemical analysis
electrokinetics
Hydrodynamics
Fluorescence Microscopy
Oils

Cite this

Alba, K. ; Sagis, L. M C ; Kontogiorgos, V. / Engineering of acidic O/W emulsions with pectin. In: Colloids and Surfaces B: Biointerfaces. 2016 ; Vol. 145. pp. 301-308.
@article{5aeb1d51b75448df98a04954f13e37e8,
title = "Engineering of acidic O/W emulsions with pectin",
abstract = "Pectins with distinct molecular design were isolated by aqueous extraction at pH 2.0 or 6.0 and were examined in terms of their formation and stabilisation capacity of model n-alkane-in-water emulsions at acidic pH (pH 2.0). The properties and stability of the resulting emulsions were examined by means of droplet size distribution analysis, Lifshitz-Slyozov-Wagner modelling, bulk rheology, interfacial composition analysis, large-amplitude oscillatory surface dilatational rheology, electrokinetic analysis and fluorescence microscopy. Both pectin preparations were able to emulsify alkanes in water but exhibited distinct ageing characteristics. Emulsions prepared using pectin isolated at pH 6.0 were remarkably stable with respect to droplet growth after thirty days of ageing, while those prepared with pectin isolated at pH 2.0 destabilised rapidly. Examination of chemical composition of interfacial layers indicated multi-layered adsorption of pectins at the oil-water interface. The higher long-term stability of emulsions prepared with pectin isolated at high pH is attributed to mechanically stronger interfaces, the highly branched nature and the low hydrodynamic volume of the chains that result in effective steric stabilisation whereas acetyl and methyl contents do not contribute to the long-term stability. The present work shows that it is possible by tailoring the fine structure of pectin to engineer emulsions that operate in acidic environments.",
keywords = "Biopolymer, Emulsions, Fluorescence, Lissajous plots, Ostwald ripening, Pectin",
author = "K. Alba and Sagis, {L. M C} and V. Kontogiorgos",
year = "2016",
month = "9",
day = "1",
doi = "10.1016/j.colsurfb.2016.05.016",
language = "English",
volume = "145",
pages = "301--308",
journal = "Colloids and Surfaces B: Biointerfaces",
issn = "0927-7765",
publisher = "Elsevier",

}

Engineering of acidic O/W emulsions with pectin. / Alba, K.; Sagis, L. M C; Kontogiorgos, V.

In: Colloids and Surfaces B: Biointerfaces, Vol. 145, 01.09.2016, p. 301-308.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Engineering of acidic O/W emulsions with pectin

AU - Alba, K.

AU - Sagis, L. M C

AU - Kontogiorgos, V.

PY - 2016/9/1

Y1 - 2016/9/1

N2 - Pectins with distinct molecular design were isolated by aqueous extraction at pH 2.0 or 6.0 and were examined in terms of their formation and stabilisation capacity of model n-alkane-in-water emulsions at acidic pH (pH 2.0). The properties and stability of the resulting emulsions were examined by means of droplet size distribution analysis, Lifshitz-Slyozov-Wagner modelling, bulk rheology, interfacial composition analysis, large-amplitude oscillatory surface dilatational rheology, electrokinetic analysis and fluorescence microscopy. Both pectin preparations were able to emulsify alkanes in water but exhibited distinct ageing characteristics. Emulsions prepared using pectin isolated at pH 6.0 were remarkably stable with respect to droplet growth after thirty days of ageing, while those prepared with pectin isolated at pH 2.0 destabilised rapidly. Examination of chemical composition of interfacial layers indicated multi-layered adsorption of pectins at the oil-water interface. The higher long-term stability of emulsions prepared with pectin isolated at high pH is attributed to mechanically stronger interfaces, the highly branched nature and the low hydrodynamic volume of the chains that result in effective steric stabilisation whereas acetyl and methyl contents do not contribute to the long-term stability. The present work shows that it is possible by tailoring the fine structure of pectin to engineer emulsions that operate in acidic environments.

AB - Pectins with distinct molecular design were isolated by aqueous extraction at pH 2.0 or 6.0 and were examined in terms of their formation and stabilisation capacity of model n-alkane-in-water emulsions at acidic pH (pH 2.0). The properties and stability of the resulting emulsions were examined by means of droplet size distribution analysis, Lifshitz-Slyozov-Wagner modelling, bulk rheology, interfacial composition analysis, large-amplitude oscillatory surface dilatational rheology, electrokinetic analysis and fluorescence microscopy. Both pectin preparations were able to emulsify alkanes in water but exhibited distinct ageing characteristics. Emulsions prepared using pectin isolated at pH 6.0 were remarkably stable with respect to droplet growth after thirty days of ageing, while those prepared with pectin isolated at pH 2.0 destabilised rapidly. Examination of chemical composition of interfacial layers indicated multi-layered adsorption of pectins at the oil-water interface. The higher long-term stability of emulsions prepared with pectin isolated at high pH is attributed to mechanically stronger interfaces, the highly branched nature and the low hydrodynamic volume of the chains that result in effective steric stabilisation whereas acetyl and methyl contents do not contribute to the long-term stability. The present work shows that it is possible by tailoring the fine structure of pectin to engineer emulsions that operate in acidic environments.

KW - Biopolymer

KW - Emulsions

KW - Fluorescence

KW - Lissajous plots

KW - Ostwald ripening

KW - Pectin

UR - http://www.scopus.com/inward/record.url?scp=84969168225&partnerID=8YFLogxK

U2 - 10.1016/j.colsurfb.2016.05.016

DO - 10.1016/j.colsurfb.2016.05.016

M3 - Article

VL - 145

SP - 301

EP - 308

JO - Colloids and Surfaces B: Biointerfaces

T2 - Colloids and Surfaces B: Biointerfaces

JF - Colloids and Surfaces B: Biointerfaces

SN - 0927-7765

ER -