Geometrical Product Specification and Verification as toolbox to meet up-to-date technical requirements

Wojciech Płowucha; Władysław Jakubiec; Zbigniew Humienny; Tino Hausotte; Enrico Savio; Mihai Dragomir; Paul Bills; Michael Marxer; Norbert Wisła; Luc Mathieu

Geometrical Product Specification and Verification as toolbox to meet up-to-date technical requirements

Wojciech Płowucha, Władysław Jakubiec, Zbigniew Humienny, Tino Hausotte, Enrico Savio, Mihai Dragomir, Paul Bills, Michael Marxer, Norbert Wisła, Luc Mathieu

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

11 Citations (Scopus)

Abstract

The ISO standards for the Geometrical Product Specification and Verification (GPS) define an internationally uniform description language, that allows expressing unambiguously and completely all requirements for the geometry of a product with the corresponding requirements for the inspection process in technical drawings, taking into account current possibilities of measurement and testing technology. The practice shows that the university curricula of the mechanical engineering faculties often include only limited classes on the GPS, mostly as part of curriculum of subjects like Metrology or Fundamentals of Machine Design. This does not allow students to gain enough knowledge on the subject. Currently there is no coherent EU-wide provision for vocational training (VET) in this area. Consortium, members of which are the authors of this paper, is preparing a proposal of an EU project aiming to develop appropriate course.

Original language	English
Title of host publication	11th International Scientific Conference on Coordinate Measuring Technique, CMT 2014
Editors	Jerzy Sladek, Wladyslaw Jakubiec
Publisher	UNIVERSITY OF BIELSKO-BIALA
Pages	131-139
Number of pages	9
ISBN (Electronic)	9788363713881
Publication status	Published - Apr 2014
Event	11th International Scientific Conference on Coordinate Measuring Technique: Coordinate Measuring Technique - Bielsko-Biala, Poland Duration: 2 Apr 2014 → 4 Apr 2014 Conference number: 11 http://arch.wtp.pl/conf/11/index.html (Link to Conference Website)

Conference

Conference	11th International Scientific Conference on Coordinate Measuring Technique
Abbreviated title	CMT 2014
Country/Territory	Poland
City	Bielsko-Biala
Period	2/04/14 → 4/04/14
Other	The aim of the conference is the exchange of information on science and technological progress in the field of designing, software, practice and verification of coordinate measuring machines and also the interaction between coordinate measuring technique and geometrical product specifications.
Internet address	http://arch.wtp.pl/conf/11/index.html (Link to Conference Website)

Cite this

Płowucha, W., Jakubiec, W., Humienny, Z., Hausotte, T., Savio, E., Dragomir, M., Bills, P., Marxer, M., Wisła, N., & Mathieu, L. (2014). Geometrical Product Specification and Verification as toolbox to meet up-to-date technical requirements. In J. Sladek, & W. Jakubiec (Eds.), 11th International Scientific Conference on Coordinate Measuring Technique, CMT 2014 (pp. 131-139). UNIVERSITY OF BIELSKO-BIALA.

@inproceedings{79602691f4994c65b49234354d79fa82,

title = "Geometrical Product Specification and Verification as toolbox to meet up-to-date technical requirements",

abstract = "The ISO standards for the Geometrical Product Specification and Verification (GPS) define an internationally uniform description language, that allows expressing unambiguously and completely all requirements for the geometry of a product with the corresponding requirements for the inspection process in technical drawings, taking into account current possibilities of measurement and testing technology. The practice shows that the university curricula of the mechanical engineering faculties often include only limited classes on the GPS, mostly as part of curriculum of subjects like Metrology or Fundamentals of Machine Design. This does not allow students to gain enough knowledge on the subject. Currently there is no coherent EU-wide provision for vocational training (VET) in this area. Consortium, members of which are the authors of this paper, is preparing a proposal of an EU project aiming to develop appropriate course.",

keywords = "E-learning, Geometrical product specification, Vocational training",

author = "Wojciech P{\l}owucha and W{\l}adys{\l}aw Jakubiec and Zbigniew Humienny and Tino Hausotte and Enrico Savio and Mihai Dragomir and Paul Bills and Michael Marxer and Norbert Wis{\l}a and Luc Mathieu",

year = "2014",

month = apr,

language = "English",

pages = "131--139",

editor = "Jerzy Sladek and Wladyslaw Jakubiec",

booktitle = "11th International Scientific Conference on Coordinate Measuring Technique, CMT 2014",

publisher = "UNIVERSITY OF BIELSKO-BIALA",

address = "Poland",

note = "11th International Scientific Conference on Coordinate Measuring Technique : Coordinate Measuring Technique, CMT 2014 ; Conference date: 02-04-2014 Through 04-04-2014",

url = "http://arch.wtp.pl/conf/11/index.html",

}

Płowucha, W, Jakubiec, W, Humienny, Z, Hausotte, T, Savio, E, Dragomir, M, Bills, P, Marxer, M, Wisła, N & Mathieu, L 2014, Geometrical Product Specification and Verification as toolbox to meet up-to-date technical requirements. in J Sladek & W Jakubiec (eds), 11th International Scientific Conference on Coordinate Measuring Technique, CMT 2014. UNIVERSITY OF BIELSKO-BIALA, pp. 131-139, 11th International Scientific Conference on Coordinate Measuring Technique, Bielsko-Biala, Poland, 2/04/14.

Geometrical Product Specification and Verification as toolbox to meet up-to-date technical requirements. / Płowucha, Wojciech; Jakubiec, Władysław; Humienny, Zbigniew et al.

11th International Scientific Conference on Coordinate Measuring Technique, CMT 2014. ed. / Jerzy Sladek; Wladyslaw Jakubiec. UNIVERSITY OF BIELSKO-BIALA, 2014. p. 131-139.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Geometrical Product Specification and Verification as toolbox to meet up-to-date technical requirements

AU - Płowucha, Wojciech

AU - Jakubiec, Władysław

AU - Humienny, Zbigniew

AU - Hausotte, Tino

AU - Savio, Enrico

AU - Dragomir, Mihai

AU - Bills, Paul

AU - Marxer, Michael

AU - Wisła, Norbert

AU - Mathieu, Luc

N1 - Conference code: 11

PY - 2014/4

Y1 - 2014/4

N2 - The ISO standards for the Geometrical Product Specification and Verification (GPS) define an internationally uniform description language, that allows expressing unambiguously and completely all requirements for the geometry of a product with the corresponding requirements for the inspection process in technical drawings, taking into account current possibilities of measurement and testing technology. The practice shows that the university curricula of the mechanical engineering faculties often include only limited classes on the GPS, mostly as part of curriculum of subjects like Metrology or Fundamentals of Machine Design. This does not allow students to gain enough knowledge on the subject. Currently there is no coherent EU-wide provision for vocational training (VET) in this area. Consortium, members of which are the authors of this paper, is preparing a proposal of an EU project aiming to develop appropriate course.

AB - The ISO standards for the Geometrical Product Specification and Verification (GPS) define an internationally uniform description language, that allows expressing unambiguously and completely all requirements for the geometry of a product with the corresponding requirements for the inspection process in technical drawings, taking into account current possibilities of measurement and testing technology. The practice shows that the university curricula of the mechanical engineering faculties often include only limited classes on the GPS, mostly as part of curriculum of subjects like Metrology or Fundamentals of Machine Design. This does not allow students to gain enough knowledge on the subject. Currently there is no coherent EU-wide provision for vocational training (VET) in this area. Consortium, members of which are the authors of this paper, is preparing a proposal of an EU project aiming to develop appropriate course.

KW - E-learning

KW - Geometrical product specification

KW - Vocational training

UR - http://www.scopus.com/inward/record.url?scp=84978539823&partnerID=8YFLogxK

UR - http://arch.wtp.pl/konf_common/11/ProceedingsCMT2014.pdf

M3 - Conference contribution

SP - 131

EP - 139

BT - 11th International Scientific Conference on Coordinate Measuring Technique, CMT 2014

A2 - Sladek, Jerzy

A2 - Jakubiec, Wladyslaw

PB - UNIVERSITY OF BIELSKO-BIALA

T2 - 11th International Scientific Conference on Coordinate Measuring Technique

Y2 - 2 April 2014 through 4 April 2014

ER -

Geometrical Product Specification and Verification as toolbox to meet up-to-date technical requirements

Abstract

Conference

Other files and links

Fingerprint

Cite this