Geometry and stiffness optimization for switches and crossings, and simulation of material degradation

D. Nicklisch, E. Kassa, J. Nielsen, M. Ekh, S. Iwnicki

Research output: Contribution to journalArticle

39 Citations (Scopus)

Abstract

A methodology for simulating wear, rolling contact fatigue, and plastic deformation for a mixed traffic situation in switches and crossings (S&C) has been developed. The methodology includes simulation of dynamic vehicle-track interaction considering stochastic variations in input data, simulation of wheel-rail contacts accounting for non-linear material properties and plasticity, and simulation of wear and plastic deformation in the rail during the life of the S&C component. To find means of improving the switch panel design, the geometry of a designed track gauge variation in the switch panel has been represented in a parametric way. For traffic in the facing and trailing moves of the through route, an optimum solution was identified and then validated by evaluating a wide set of simulation cases (using different wheel profiles). The optimum design includes a 12 mm maximum gauge widening. Several crossing geometries were investigated to find an optimal geometric design for the crossing nose and wing rails. The MaKüDe design showed the best performance for moderately worn wheel profiles in both running directions (facing and trailing moves). In connection with reduced support stiffness (e.g. elastic rail pads), this crossing design is predicted to lead to a significant reduction of impact loads and consequently provide a high potential of life-cycle cost reduction.

Original languageEnglish
Pages (from-to)279-292
Number of pages14
JournalProceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
Volume224
Issue number4
DOIs
Publication statusPublished - 1 Jan 2010
Externally publishedYes

Fingerprint

Rails
Switches
Stiffness
Degradation
Wheels
Geometry
Gages
Plastic deformation
Wear of materials
Cost reduction
Plasticity
Life cycle
Materials properties
Fatigue of materials

Cite this

@article{b788d46885cd415a9634e12c078d0f17,
title = "Geometry and stiffness optimization for switches and crossings, and simulation of material degradation",
abstract = "A methodology for simulating wear, rolling contact fatigue, and plastic deformation for a mixed traffic situation in switches and crossings (S&C) has been developed. The methodology includes simulation of dynamic vehicle-track interaction considering stochastic variations in input data, simulation of wheel-rail contacts accounting for non-linear material properties and plasticity, and simulation of wear and plastic deformation in the rail during the life of the S&C component. To find means of improving the switch panel design, the geometry of a designed track gauge variation in the switch panel has been represented in a parametric way. For traffic in the facing and trailing moves of the through route, an optimum solution was identified and then validated by evaluating a wide set of simulation cases (using different wheel profiles). The optimum design includes a 12 mm maximum gauge widening. Several crossing geometries were investigated to find an optimal geometric design for the crossing nose and wing rails. The MaK{\"u}De design showed the best performance for moderately worn wheel profiles in both running directions (facing and trailing moves). In connection with reduced support stiffness (e.g. elastic rail pads), this crossing design is predicted to lead to a significant reduction of impact loads and consequently provide a high potential of life-cycle cost reduction.",
keywords = "plastic deformation, switches and crossings, track gauge, track stiffness, wear",
author = "D. Nicklisch and E. Kassa and J. Nielsen and M. Ekh and S. Iwnicki",
year = "2010",
month = "1",
day = "1",
doi = "10.1243/09544097JRRT348",
language = "English",
volume = "224",
pages = "279--292",
journal = "Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit",
issn = "0954-4097",
publisher = "SAGE Publications Ltd",
number = "4",

}

Geometry and stiffness optimization for switches and crossings, and simulation of material degradation. / Nicklisch, D.; Kassa, E.; Nielsen, J.; Ekh, M.; Iwnicki, S.

In: Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, Vol. 224, No. 4, 01.01.2010, p. 279-292.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Geometry and stiffness optimization for switches and crossings, and simulation of material degradation

AU - Nicklisch, D.

AU - Kassa, E.

AU - Nielsen, J.

AU - Ekh, M.

AU - Iwnicki, S.

PY - 2010/1/1

Y1 - 2010/1/1

N2 - A methodology for simulating wear, rolling contact fatigue, and plastic deformation for a mixed traffic situation in switches and crossings (S&C) has been developed. The methodology includes simulation of dynamic vehicle-track interaction considering stochastic variations in input data, simulation of wheel-rail contacts accounting for non-linear material properties and plasticity, and simulation of wear and plastic deformation in the rail during the life of the S&C component. To find means of improving the switch panel design, the geometry of a designed track gauge variation in the switch panel has been represented in a parametric way. For traffic in the facing and trailing moves of the through route, an optimum solution was identified and then validated by evaluating a wide set of simulation cases (using different wheel profiles). The optimum design includes a 12 mm maximum gauge widening. Several crossing geometries were investigated to find an optimal geometric design for the crossing nose and wing rails. The MaKüDe design showed the best performance for moderately worn wheel profiles in both running directions (facing and trailing moves). In connection with reduced support stiffness (e.g. elastic rail pads), this crossing design is predicted to lead to a significant reduction of impact loads and consequently provide a high potential of life-cycle cost reduction.

AB - A methodology for simulating wear, rolling contact fatigue, and plastic deformation for a mixed traffic situation in switches and crossings (S&C) has been developed. The methodology includes simulation of dynamic vehicle-track interaction considering stochastic variations in input data, simulation of wheel-rail contacts accounting for non-linear material properties and plasticity, and simulation of wear and plastic deformation in the rail during the life of the S&C component. To find means of improving the switch panel design, the geometry of a designed track gauge variation in the switch panel has been represented in a parametric way. For traffic in the facing and trailing moves of the through route, an optimum solution was identified and then validated by evaluating a wide set of simulation cases (using different wheel profiles). The optimum design includes a 12 mm maximum gauge widening. Several crossing geometries were investigated to find an optimal geometric design for the crossing nose and wing rails. The MaKüDe design showed the best performance for moderately worn wheel profiles in both running directions (facing and trailing moves). In connection with reduced support stiffness (e.g. elastic rail pads), this crossing design is predicted to lead to a significant reduction of impact loads and consequently provide a high potential of life-cycle cost reduction.

KW - plastic deformation

KW - switches and crossings

KW - track gauge

KW - track stiffness

KW - wear

UR - http://www.scopus.com/inward/record.url?scp=77955286860&partnerID=8YFLogxK

U2 - 10.1243/09544097JRRT348

DO - 10.1243/09544097JRRT348

M3 - Article

VL - 224

SP - 279

EP - 292

JO - Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit

JF - Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit

SN - 0954-4097

IS - 4

ER -