Quasi-Static Flexural and Tensile Behavior of Glass Fiber Reinforced Polymer

S. Azwan; B. Abdi; M. Yazid Yahya; Amran Ayob

doi:10.4028/www.scientific.net/AMR.845.302

Quasi-Static Flexural and Tensile Behavior of Glass Fiber Reinforced Polymer

S. Azwan, B. Abdi, M. Yazid Yahya, Amran Ayob

University of Technology Malaysia

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

In this paper, glass fiber reinforce polymer subject to quasi-static three point bending loading and tensile loading was studied experimentally. Glass fiber reinforced made of chopped strand mat (CSM) were used in this study. Several samples were prepared and tested by using Instron universal testing machine at different strain rate including 1mm/min, 10mm/min and 100mm/min and all of the tests were repeated three times in order to minimize experimental error and the average of the obtained results were used for further analysis. The load-extension curves and stress-strain curveofglass fiber reinforce subject to three point bending and tensile loading test were determined at different strain rate and the obtained results were compared together. As results of this study, it has found that the strain rate has effect on flexural and tensile behavior of glass fiber reinforce.

Original language	English
Title of host publication	Materials, Industrial, and Manufacturing Engineering Research Advances 1.1
Editors	Denni Kurniawan
Publisher	Trans Tech Publications Ltd
Pages	302-305
Number of pages	4
ISBN (Electronic)	9783037956304, 9783038263173
ISBN (Print)	9783037859360
DOIs	https://doi.org/10.4028/www.scientific.net/AMR.845.302
Publication status	Published - 4 Dec 2013
Externally published	Yes
Event	1st International Materials, Industrial, and Manufacturing Engineering Conference - Johor Bahru, Malaysia Duration: 4 Dec 2013 → 6 Dec 2013 https://web.archive.org/web/20140328010805/http://www.utm.my/mimec/

Publication series

Name	Advanced Materials Research
Publisher	Trans Tech Publications Ltd
Volume	845
ISSN (Print)	1022-6680

Conference

Conference	1st International Materials, Industrial, and Manufacturing Engineering Conference
Abbreviated title	MIMEC 2013
Country/Territory	Malaysia
City	Johor Bahru
Period	4/12/13 → 6/12/13
Internet address	https://web.archive.org/web/20140328010805/http://www.utm.my/mimec/

Access to Document

10.4028/www.scientific.net/AMR.845.302Licence: Unspecified

Cite this

@inproceedings{50a7ee994f694df98a23bfb357ff5676,

title = "Quasi-Static Flexural and Tensile Behavior of Glass Fiber Reinforced Polymer",

abstract = "In this paper, glass fiber reinforce polymer subject to quasi-static three point bending loading and tensile loading was studied experimentally. Glass fiber reinforced made of chopped strand mat (CSM) were used in this study. Several samples were prepared and tested by using Instron universal testing machine at different strain rate including 1mm/min, 10mm/min and 100mm/min and all of the tests were repeated three times in order to minimize experimental error and the average of the obtained results were used for further analysis. The load-extension curves and stress-strain curveofglass fiber reinforce subject to three point bending and tensile loading test were determined at different strain rate and the obtained results were compared together. As results of this study, it has found that the strain rate has effect on flexural and tensile behavior of glass fiber reinforce.",

keywords = "Flexural, Glass fiber reinforce, Quasi-static, Tensile",

author = "S. Azwan and B. Abdi and Yahya, \{M. Yazid\} and Amran Ayob",

year = "2013",

month = dec,

day = "4",

doi = "10.4028/www.scientific.net/AMR.845.302",

language = "English",

isbn = "9783037859360",

series = "Advanced Materials Research",

publisher = "Trans Tech Publications Ltd",

pages = "302--305",

editor = "Denni Kurniawan",

booktitle = "Materials, Industrial, and Manufacturing Engineering Research Advances 1.1",

address = "Switzerland",

note = "1st International Materials, Industrial, and Manufacturing Engineering Conference , MIMEC 2013 ; Conference date: 04-12-2013 Through 06-12-2013",

url = "https://web.archive.org/web/20140328010805/http://www.utm.my/mimec/",

}

Azwan, S, Abdi, B, Yahya, MY & Ayob, A 2013, Quasi-Static Flexural and Tensile Behavior of Glass Fiber Reinforced Polymer. in D Kurniawan (ed.), Materials, Industrial, and Manufacturing Engineering Research Advances 1.1. Advanced Materials Research, vol. 845, Trans Tech Publications Ltd, pp. 302-305, 1st International Materials, Industrial, and Manufacturing Engineering Conference , Johor Bahru, Malaysia, 4/12/13. https://doi.org/10.4028/www.scientific.net/AMR.845.302

Quasi-Static Flexural and Tensile Behavior of Glass Fiber Reinforced Polymer. / Azwan, S.; Abdi, B.; Yahya, M. Yazid et al.
Materials, Industrial, and Manufacturing Engineering Research Advances 1.1. ed. / Denni Kurniawan. Trans Tech Publications Ltd, 2013. p. 302-305 (Advanced Materials Research; Vol. 845).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Quasi-Static Flexural and Tensile Behavior of Glass Fiber Reinforced Polymer

AU - Azwan, S.

AU - Abdi, B.

AU - Yahya, M. Yazid

AU - Ayob, Amran

PY - 2013/12/4

Y1 - 2013/12/4

N2 - In this paper, glass fiber reinforce polymer subject to quasi-static three point bending loading and tensile loading was studied experimentally. Glass fiber reinforced made of chopped strand mat (CSM) were used in this study. Several samples were prepared and tested by using Instron universal testing machine at different strain rate including 1mm/min, 10mm/min and 100mm/min and all of the tests were repeated three times in order to minimize experimental error and the average of the obtained results were used for further analysis. The load-extension curves and stress-strain curveofglass fiber reinforce subject to three point bending and tensile loading test were determined at different strain rate and the obtained results were compared together. As results of this study, it has found that the strain rate has effect on flexural and tensile behavior of glass fiber reinforce.

AB - In this paper, glass fiber reinforce polymer subject to quasi-static three point bending loading and tensile loading was studied experimentally. Glass fiber reinforced made of chopped strand mat (CSM) were used in this study. Several samples were prepared and tested by using Instron universal testing machine at different strain rate including 1mm/min, 10mm/min and 100mm/min and all of the tests were repeated three times in order to minimize experimental error and the average of the obtained results were used for further analysis. The load-extension curves and stress-strain curveofglass fiber reinforce subject to three point bending and tensile loading test were determined at different strain rate and the obtained results were compared together. As results of this study, it has found that the strain rate has effect on flexural and tensile behavior of glass fiber reinforce.

KW - Flexural

KW - Glass fiber reinforce

KW - Quasi-static

KW - Tensile

UR - https://www.scopus.com/pages/publications/84891549990

UR - https://www.scientific.net/book/materials-industrial-and-manufacturing-engineering-research-advances-1-1/978-3-03826-317-3

U2 - 10.4028/www.scientific.net/AMR.845.302

DO - 10.4028/www.scientific.net/AMR.845.302

M3 - Conference contribution

AN - SCOPUS:84891549990

SN - 9783037859360

T3 - Advanced Materials Research

SP - 302

EP - 305

BT - Materials, Industrial, and Manufacturing Engineering Research Advances 1.1

A2 - Kurniawan, Denni

PB - Trans Tech Publications Ltd

T2 - 1st International Materials, Industrial, and Manufacturing Engineering Conference

Y2 - 4 December 2013 through 6 December 2013

ER -

Quasi-Static Flexural and Tensile Behavior of Glass Fiber Reinforced Polymer

Abstract

Publication series

Conference

Access to Document

Other files and links

Fingerprint

Cite this