Review of Non-contact Blade Vibration Monitoring Based on Blade Tip Timing

Fubin Wang; Chao Fu; Longxi Zheng; Kuan Lu; Fengshou Gu

doi:10.1007/978-3-031-49413-0_34

Review of Non-contact Blade Vibration Monitoring Based on Blade Tip Timing

Fubin Wang, Chao Fu, Longxi Zheng, Kuan Lu, Fengshou Gu

Northwestern Polytechnical University

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

In the working state of the aero engine, it is very important to accurately monitor the vibration characteristics of the rotor blades to obtain their operating status, aiming to avoid serious failures such as the fatigue fracture of blades and rub-impact between blades and casing and ensure the overall safety of the engine. At present, the non-contact blade vibration measurement technology based on blade tip timing (BTT) technology is the most promising tool among all measurement schemes. This paper summarizes the advantages of the BTT technique and explains the working principle of each part of the system. The historical development process of the BTT, the current research progress, and cutting-edge achievements of non-contact blade vibration measurement and vibration signal processing based on the BTT technology are comprehensively analyzed. The intelligent monitoring technology and the estimation of stress and strain fields of integral blades are also covered. Finally, the existing technical problems are discussed, and the future development trend of this technology prospects.

Original language	English
Title of host publication	Proceedings of the UNIfied Conference of DAMAS, IncoME and TEPEN Conferences (UNIfied 2023)
Subtitle of host publication	Volume 1
Editors	Andrew D. Ball, Huajiang Ouyang, Jyoti K. Sinha, Zuolu Wang
Publisher	Springer, Cham
Pages	459-469
Number of pages	11
Volume	151
Edition	1st
ISBN (Electronic)	9783031494130
ISBN (Print)	9783031494123, 9783031494154
DOIs	https://doi.org/10.1007/978-3-031-49413-0_34
Publication status	Published - 30 May 2024
Event	UNIfied Conference of DAMAS, InCoME and TEPEN Conferences - Huddersfield, United Kingdom, Huddersfield, United Kingdom Duration: 29 Aug 2023 → 1 Sept 2023 https://unified2023.org/

Publication series

Name	Mechanisms and Machine Science
Publisher	Springer
Volume	151 MMS
ISSN (Print)	2211-0984
ISSN (Electronic)	2211-0992

Conference

Conference	UNIfied Conference of DAMAS, InCoME and TEPEN Conferences
Abbreviated title	UNIfied 2023
Country/Territory	United Kingdom
City	Huddersfield
Period	29/08/23 → 1/09/23
Internet address	https://unified2023.org/

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 9 Industry, Innovation, and Infrastructure

Access to Document

10.1007/978-3-031-49413-0_34Licence: Unspecified

Cite this

Wang, F., Fu, C., Zheng, L., Lu, K., & Gu, F. (2024). Review of Non-contact Blade Vibration Monitoring Based on Blade Tip Timing. In A. D. Ball, H. Ouyang, J. K. Sinha, & Z. Wang (Eds.), Proceedings of the UNIfied Conference of DAMAS, IncoME and TEPEN Conferences (UNIfied 2023) : Volume 1 (1st ed., Vol. 151, pp. 459-469). (Mechanisms and Machine Science; Vol. 151 MMS). Springer, Cham. https://doi.org/10.1007/978-3-031-49413-0_34

Wang, Fubin ; Fu, Chao ; Zheng, Longxi et al. / Review of Non-contact Blade Vibration Monitoring Based on Blade Tip Timing. Proceedings of the UNIfied Conference of DAMAS, IncoME and TEPEN Conferences (UNIfied 2023) : Volume 1. editor / Andrew D. Ball ; Huajiang Ouyang ; Jyoti K. Sinha ; Zuolu Wang. Vol. 151 1st. ed. Springer, Cham, 2024. pp. 459-469 (Mechanisms and Machine Science).

@inproceedings{a034f6f8b35c4a7e94059da83e7e73fa,

title = "Review of Non-contact Blade Vibration Monitoring Based on Blade Tip Timing",

abstract = "In the working state of the aero engine, it is very important to accurately monitor the vibration characteristics of the rotor blades to obtain their operating status, aiming to avoid serious failures such as the fatigue fracture of blades and rub-impact between blades and casing and ensure the overall safety of the engine. At present, the non-contact blade vibration measurement technology based on blade tip timing (BTT) technology is the most promising tool among all measurement schemes. This paper summarizes the advantages of the BTT technique and explains the working principle of each part of the system. The historical development process of the BTT, the current research progress, and cutting-edge achievements of non-contact blade vibration measurement and vibration signal processing based on the BTT technology are comprehensively analyzed. The intelligent monitoring technology and the estimation of stress and strain fields of integral blades are also covered. Finally, the existing technical problems are discussed, and the future development trend of this technology prospects.",

keywords = "Blade tip timing, Non-contact, Rotor blades, Stress and strain fields, Vibration measurement",

author = "Fubin Wang and Chao Fu and Longxi Zheng and Kuan Lu and Fengshou Gu",

note = "Publisher Copyright: {\textcopyright} The Author(s), under exclusive license to Springer Nature Switzerland AG 2024.; UNIfied Conference of DAMAS, InCoME and TEPEN Conferences, UNIfied 2023 ; Conference date: 29-08-2023 Through 01-09-2023",

year = "2024",

month = may,

day = "30",

doi = "10.1007/978-3-031-49413-0\_34",

language = "English",

isbn = "9783031494123",

volume = "151",

series = "Mechanisms and Machine Science",

publisher = "Springer, Cham",

pages = "459--469",

editor = "Ball, \{Andrew D.\} and Huajiang Ouyang and Sinha, \{Jyoti K.\} and Zuolu Wang",

booktitle = "Proceedings of the UNIfied Conference of DAMAS, IncoME and TEPEN Conferences (UNIfied 2023)",

address = "Switzerland",

edition = "1st",

url = "https://unified2023.org/",

}

Wang, F, Fu, C, Zheng, L, Lu, K & Gu, F 2024, Review of Non-contact Blade Vibration Monitoring Based on Blade Tip Timing. in AD Ball, H Ouyang, JK Sinha & Z Wang (eds), Proceedings of the UNIfied Conference of DAMAS, IncoME and TEPEN Conferences (UNIfied 2023) : Volume 1. 1st edn, vol. 151, Mechanisms and Machine Science, vol. 151 MMS, Springer, Cham, pp. 459-469, UNIfied Conference of DAMAS, InCoME and TEPEN Conferences, Huddersfield, United Kingdom, 29/08/23. https://doi.org/10.1007/978-3-031-49413-0_34

Review of Non-contact Blade Vibration Monitoring Based on Blade Tip Timing. / Wang, Fubin; Fu, Chao; Zheng, Longxi et al.
Proceedings of the UNIfied Conference of DAMAS, IncoME and TEPEN Conferences (UNIfied 2023) : Volume 1. ed. / Andrew D. Ball; Huajiang Ouyang; Jyoti K. Sinha; Zuolu Wang. Vol. 151 1st. ed. Springer, Cham, 2024. p. 459-469 (Mechanisms and Machine Science; Vol. 151 MMS).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Review of Non-contact Blade Vibration Monitoring Based on Blade Tip Timing

AU - Wang, Fubin

AU - Fu, Chao

AU - Zheng, Longxi

AU - Lu, Kuan

AU - Gu, Fengshou

N1 - Publisher Copyright: © The Author(s), under exclusive license to Springer Nature Switzerland AG 2024.

PY - 2024/5/30

Y1 - 2024/5/30

N2 - In the working state of the aero engine, it is very important to accurately monitor the vibration characteristics of the rotor blades to obtain their operating status, aiming to avoid serious failures such as the fatigue fracture of blades and rub-impact between blades and casing and ensure the overall safety of the engine. At present, the non-contact blade vibration measurement technology based on blade tip timing (BTT) technology is the most promising tool among all measurement schemes. This paper summarizes the advantages of the BTT technique and explains the working principle of each part of the system. The historical development process of the BTT, the current research progress, and cutting-edge achievements of non-contact blade vibration measurement and vibration signal processing based on the BTT technology are comprehensively analyzed. The intelligent monitoring technology and the estimation of stress and strain fields of integral blades are also covered. Finally, the existing technical problems are discussed, and the future development trend of this technology prospects.

AB - In the working state of the aero engine, it is very important to accurately monitor the vibration characteristics of the rotor blades to obtain their operating status, aiming to avoid serious failures such as the fatigue fracture of blades and rub-impact between blades and casing and ensure the overall safety of the engine. At present, the non-contact blade vibration measurement technology based on blade tip timing (BTT) technology is the most promising tool among all measurement schemes. This paper summarizes the advantages of the BTT technique and explains the working principle of each part of the system. The historical development process of the BTT, the current research progress, and cutting-edge achievements of non-contact blade vibration measurement and vibration signal processing based on the BTT technology are comprehensively analyzed. The intelligent monitoring technology and the estimation of stress and strain fields of integral blades are also covered. Finally, the existing technical problems are discussed, and the future development trend of this technology prospects.

KW - Blade tip timing

KW - Non-contact

KW - Rotor blades

KW - Stress and strain fields

KW - Vibration measurement

UR - https://www.scopus.com/pages/publications/85197118493

UR - https://doi.org/10.1007/978-3-031-49413-0

U2 - 10.1007/978-3-031-49413-0_34

DO - 10.1007/978-3-031-49413-0_34

M3 - Conference contribution

AN - SCOPUS:85197118493

SN - 9783031494123

SN - 9783031494154

VL - 151

T3 - Mechanisms and Machine Science

SP - 459

EP - 469

BT - Proceedings of the UNIfied Conference of DAMAS, IncoME and TEPEN Conferences (UNIfied 2023)

A2 - Ball, Andrew D.

A2 - Ouyang, Huajiang

A2 - Sinha, Jyoti K.

A2 - Wang, Zuolu

PB - Springer, Cham

T2 - UNIfied Conference of DAMAS, InCoME and TEPEN Conferences

Y2 - 29 August 2023 through 1 September 2023

ER -

Wang F, Fu C, Zheng L, Lu K, Gu F. Review of Non-contact Blade Vibration Monitoring Based on Blade Tip Timing. In Ball AD, Ouyang H, Sinha JK, Wang Z, editors, Proceedings of the UNIfied Conference of DAMAS, IncoME and TEPEN Conferences (UNIfied 2023) : Volume 1. 1st ed. Vol. 151. Springer, Cham. 2024. p. 459-469. (Mechanisms and Machine Science). Epub 2024 May 29. doi: 10.1007/978-3-031-49413-0_34

Review of Non-contact Blade Vibration Monitoring Based on Blade Tip Timing

Abstract

Publication series

Conference

UN SDGs

Access to Document

Other files and links

Fingerprint