Simulating 5-Axis Milling with a Ball Nose Cutting Tool

Chun Chan; Simon Barrans

doi:10.1109/ICMAE52228.2021.9522558

Simulating 5-Axis Milling with a Ball Nose Cutting Tool

Chun Chan, Simon Barrans

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

Abstract

5-axis milling has become widely used in industries where 3-Dimensional cutting is needed. The cutting cost is higher than using 3-axis milling due to the higher complexity of the machine tools. Although the literature describes research investigating the 5-axis cutting process experimentally, there is a lack of research focusing on modeling to the process. Existing models tend to simulate the process in step-wise fashion. In this paper a new model is presented which simulates the continuous process. The impact of this on the feed marks generated within the cusps is demonstrated.

Original language	English
Title of host publication	Proceedings of 12th International Conference on Mechanical and Aerospace Engineering, ICMAE 2021
Publisher	IEEE
Pages	269-274
Number of pages	6
ISBN (Electronic)	9781665433211, 9781665433204
ISBN (Print)	9781665433228
DOIs	https://doi.org/10.1109/ICMAE52228.2021.9522558
Publication status	Published - 30 Aug 2021
Event	12th International Conference on Mechanical and Aerospace Engineering - Virtual, Athens, Greece Duration: 16 Jul 2021 → 19 Jul 2021 Conference number: 12

Conference

Conference	12th International Conference on Mechanical and Aerospace Engineering
Abbreviated title	ICMAE 2021
Country/Territory	Greece
City	Virtual, Athens
Period	16/07/21 → 19/07/21

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 9 Industry, Innovation, and Infrastructure

Access to Document

10.1109/ICMAE52228.2021.9522558Licence: Unspecified

Cite this

@inproceedings{7618b72713d64b24908c95c3b3121e31,

title = "Simulating 5-Axis Milling with a Ball Nose Cutting Tool",

abstract = "5-axis milling has become widely used in industries where 3-Dimensional cutting is needed. The cutting cost is higher than using 3-axis milling due to the higher complexity of the machine tools. Although the literature describes research investigating the 5-axis cutting process experimentally, there is a lack of research focusing on modeling to the process. Existing models tend to simulate the process in step-wise fashion. In this paper a new model is presented which simulates the continuous process. The impact of this on the feed marks generated within the cusps is demonstrated. ",

keywords = "5-axis milling, Component, Cutting model, Simulation",

author = "Chun Chan and Simon Barrans",

note = "Publisher Copyright: {\textcopyright} 2021 IEEE. Copyright: Copyright 2021 Elsevier B.V., All rights reserved.; 12th International Conference on Mechanical and Aerospace Engineering, ICMAE 2021 ; Conference date: 16-07-2021 Through 19-07-2021",

year = "2021",

month = aug,

day = "30",

doi = "10.1109/ICMAE52228.2021.9522558",

language = "English",

isbn = "9781665433228",

pages = "269--274",

booktitle = "Proceedings of 12th International Conference on Mechanical and Aerospace Engineering, ICMAE 2021",

publisher = "IEEE",

address = "United States",

}

TY - GEN

T1 - Simulating 5-Axis Milling with a Ball Nose Cutting Tool

AU - Chan, Chun

AU - Barrans, Simon

N1 - Conference code: 12

PY - 2021/8/30

Y1 - 2021/8/30

N2 - 5-axis milling has become widely used in industries where 3-Dimensional cutting is needed. The cutting cost is higher than using 3-axis milling due to the higher complexity of the machine tools. Although the literature describes research investigating the 5-axis cutting process experimentally, there is a lack of research focusing on modeling to the process. Existing models tend to simulate the process in step-wise fashion. In this paper a new model is presented which simulates the continuous process. The impact of this on the feed marks generated within the cusps is demonstrated.

AB - 5-axis milling has become widely used in industries where 3-Dimensional cutting is needed. The cutting cost is higher than using 3-axis milling due to the higher complexity of the machine tools. Although the literature describes research investigating the 5-axis cutting process experimentally, there is a lack of research focusing on modeling to the process. Existing models tend to simulate the process in step-wise fashion. In this paper a new model is presented which simulates the continuous process. The impact of this on the feed marks generated within the cusps is demonstrated.

KW - 5-axis milling

KW - Component

KW - Cutting model

KW - Simulation

UR - https://www.scopus.com/pages/publications/85115385470

U2 - 10.1109/ICMAE52228.2021.9522558

DO - 10.1109/ICMAE52228.2021.9522558

M3 - Conference contribution

AN - SCOPUS:85115385470

SN - 9781665433228

SP - 269

EP - 274

BT - Proceedings of 12th International Conference on Mechanical and Aerospace Engineering, ICMAE 2021

PB - IEEE

T2 - 12th International Conference on Mechanical and Aerospace Engineering

Y2 - 16 July 2021 through 19 July 2021

ER -

Simulating 5-Axis Milling with a Ball Nose Cutting Tool

Abstract

Conference

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this