Solar charger system with LED driver using capacitor-less multi-port converter

S. M. Dehghan; M. Alinaghizadeh Ardestani

doi:10.1109/PEDSTC.2016.7556865

Solar charger system with LED driver using capacitor-less multi-port converter

S. M. Dehghan, M. Alinaghizadeh Ardestani

Qom University of Technology

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Citations (Scopus)

Abstract

In this paper, a three-port converter, without capacitor in the common bus, is used for a solar charger application. Two ports of the converter are connected to a solar panel and a battery bank. Third port is used as a LED driver with constant current. This paper analyzes the used converter and proposes special switching, control and design approaches for the mentioned application. The performance of the proposed configuration and approaches are surveyed using simulation results.

Original language	English
Title of host publication	7th Power Electronics, Drive Systems and Technologies Conference, PEDSTC 2016
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	222-227
Number of pages	6
ISBN (Electronic)	9781509003754
ISBN (Print)	9781509003761
DOIs	https://doi.org/10.1109/PEDSTC.2016.7556865
Publication status	Published - 1 Sept 2016
Externally published	Yes
Event	7th Power Electronics, Drive Systems and Technologies Conference - Tehran, Iran, Islamic Republic of Duration: 16 Feb 2016 → 18 Feb 2016 Conference number: 7

Conference

Conference	7th Power Electronics, Drive Systems and Technologies Conference
Abbreviated title	PEDSTC 2016
Country/Territory	Iran, Islamic Republic of
City	Tehran
Period	16/02/16 → 18/02/16

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Access to Document

10.1109/PEDSTC.2016.7556865Licence: Unspecified

Cite this

@inproceedings{ed742ba3112c47608f0a2ea4fa617399,

title = "Solar charger system with LED driver using capacitor-less multi-port converter",

abstract = "In this paper, a three-port converter, without capacitor in the common bus, is used for a solar charger application. Two ports of the converter are connected to a solar panel and a battery bank. Third port is used as a LED driver with constant current. This paper analyzes the used converter and proposes special switching, control and design approaches for the mentioned application. The performance of the proposed configuration and approaches are surveyed using simulation results.",

keywords = "LED Driver, Maximum Power Point Tracking (MPPT), Multi-Port DC/DC Converter, Photovoltaic, Solar Charger",

author = "Dehghan, \{S. M.\} and \{Alinaghizadeh Ardestani\}, M.",

year = "2016",

month = sep,

day = "1",

doi = "10.1109/PEDSTC.2016.7556865",

language = "English",

isbn = "9781509003761",

pages = "222--227",

booktitle = "7th Power Electronics, Drive Systems and Technologies Conference, PEDSTC 2016",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

address = "United States",

note = "7th Power Electronics, Drive Systems and Technologies Conference, PEDSTC 2016 ; Conference date: 16-02-2016 Through 18-02-2016",

}

Dehghan, SM & Alinaghizadeh Ardestani, M 2016, Solar charger system with LED driver using capacitor-less multi-port converter. in 7th Power Electronics, Drive Systems and Technologies Conference, PEDSTC 2016., 7556865, Institute of Electrical and Electronics Engineers Inc., pp. 222-227, 7th Power Electronics, Drive Systems and Technologies Conference, Tehran, Iran, Islamic Republic of, 16/02/16. https://doi.org/10.1109/PEDSTC.2016.7556865

Solar charger system with LED driver using capacitor-less multi-port converter. / Dehghan, S. M.; Alinaghizadeh Ardestani, M.
7th Power Electronics, Drive Systems and Technologies Conference, PEDSTC 2016. Institute of Electrical and Electronics Engineers Inc., 2016. p. 222-227 7556865.

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Solar charger system with LED driver using capacitor-less multi-port converter

AU - Dehghan, S. M.

AU - Alinaghizadeh Ardestani, M.

N1 - Conference code: 7

PY - 2016/9/1

Y1 - 2016/9/1

N2 - In this paper, a three-port converter, without capacitor in the common bus, is used for a solar charger application. Two ports of the converter are connected to a solar panel and a battery bank. Third port is used as a LED driver with constant current. This paper analyzes the used converter and proposes special switching, control and design approaches for the mentioned application. The performance of the proposed configuration and approaches are surveyed using simulation results.

AB - In this paper, a three-port converter, without capacitor in the common bus, is used for a solar charger application. Two ports of the converter are connected to a solar panel and a battery bank. Third port is used as a LED driver with constant current. This paper analyzes the used converter and proposes special switching, control and design approaches for the mentioned application. The performance of the proposed configuration and approaches are surveyed using simulation results.

KW - LED Driver

KW - Maximum Power Point Tracking (MPPT)

KW - Multi-Port DC/DC Converter

KW - Photovoltaic

KW - Solar Charger

UR - https://www.scopus.com/pages/publications/84987942248

U2 - 10.1109/PEDSTC.2016.7556865

DO - 10.1109/PEDSTC.2016.7556865

M3 - Conference contribution

AN - SCOPUS:84987942248

SN - 9781509003761

SP - 222

EP - 227

BT - 7th Power Electronics, Drive Systems and Technologies Conference, PEDSTC 2016

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 7th Power Electronics, Drive Systems and Technologies Conference

Y2 - 16 February 2016 through 18 February 2016

ER -

Solar charger system with LED driver using capacitor-less multi-port converter

Abstract

Conference

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this