Study on the measurement of global sizes of cylindrical parts using Talyrond 585LT

Zexiang Zhao, Xinyu Zhao, Ruyi Liu, Dongxue Ren, Yanlong Cao, Wenhan Zeng

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

The measurement method of the global sizes of cylindrical parts based on Talyrond 585LT and the standard ring was proposed. The changing processes from the roundness profiles measured by Talyrond 585LT to the actual roundness profiles was studied for holes and shafts, respectively. The evaluation models of the least-squares diameter, minimum circumscribed diameter, maximum inscribed diameter and minimax diameter of cylindrical parts were given. The roundness profiles of two holes and two shafts were extracted and changed into their corresponding actual roundness profiles. Their global sizes were evaluated, and their measurement uncertainties were analyzed and estimated. The analysis and experiment results showed that the above measuring method can meet the measurement need of the global sizes of cylindrical parts for implementation of ISO 14405-1 in the manufacturing industry.
LanguageEnglish
Title of host publication2019 25th International Conference on Automation & Computing (ICAC)
PublisherIEEE
Pages86-90
Number of pages5
Publication statusAccepted/In press - 2019

Fingerprint

Industry
Experiments
Uncertainty

Cite this

Zhao, Z., Zhao, X., Liu, R., Ren, D., Cao, Y., & Zeng, W. (Accepted/In press). Study on the measurement of global sizes of cylindrical parts using Talyrond 585LT. In 2019 25th International Conference on Automation & Computing (ICAC) (pp. 86-90). IEEE.
Zhao, Zexiang ; Zhao, Xinyu ; Liu, Ruyi ; Ren, Dongxue ; Cao, Yanlong ; Zeng, Wenhan. / Study on the measurement of global sizes of cylindrical parts using Talyrond 585LT. 2019 25th International Conference on Automation & Computing (ICAC). IEEE, 2019. pp. 86-90
@inproceedings{2834e6d58ffb4c1ba264b5440bcfb546,
title = "Study on the measurement of global sizes of cylindrical parts using Talyrond 585LT",
abstract = "The measurement method of the global sizes of cylindrical parts based on Talyrond 585LT and the standard ring was proposed. The changing processes from the roundness profiles measured by Talyrond 585LT to the actual roundness profiles was studied for holes and shafts, respectively. The evaluation models of the least-squares diameter, minimum circumscribed diameter, maximum inscribed diameter and minimax diameter of cylindrical parts were given. The roundness profiles of two holes and two shafts were extracted and changed into their corresponding actual roundness profiles. Their global sizes were evaluated, and their measurement uncertainties were analyzed and estimated. The analysis and experiment results showed that the above measuring method can meet the measurement need of the global sizes of cylindrical parts for implementation of ISO 14405-1 in the manufacturing industry.",
keywords = "least-squares diameter, minimum circumscribed diameter, maximum inscribed diameter, minimax diameter",
author = "Zexiang Zhao and Xinyu Zhao and Ruyi Liu and Dongxue Ren and Yanlong Cao and Wenhan Zeng",
year = "2019",
language = "English",
pages = "86--90",
booktitle = "2019 25th International Conference on Automation & Computing (ICAC)",
publisher = "IEEE",

}

Zhao, Z, Zhao, X, Liu, R, Ren, D, Cao, Y & Zeng, W 2019, Study on the measurement of global sizes of cylindrical parts using Talyrond 585LT. in 2019 25th International Conference on Automation & Computing (ICAC). IEEE, pp. 86-90.

Study on the measurement of global sizes of cylindrical parts using Talyrond 585LT. / Zhao, Zexiang; Zhao, Xinyu; Liu, Ruyi; Ren, Dongxue; Cao, Yanlong; Zeng, Wenhan.

2019 25th International Conference on Automation & Computing (ICAC). IEEE, 2019. p. 86-90.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

TY - GEN

T1 - Study on the measurement of global sizes of cylindrical parts using Talyrond 585LT

AU - Zhao, Zexiang

AU - Zhao, Xinyu

AU - Liu, Ruyi

AU - Ren, Dongxue

AU - Cao, Yanlong

AU - Zeng, Wenhan

PY - 2019

Y1 - 2019

N2 - The measurement method of the global sizes of cylindrical parts based on Talyrond 585LT and the standard ring was proposed. The changing processes from the roundness profiles measured by Talyrond 585LT to the actual roundness profiles was studied for holes and shafts, respectively. The evaluation models of the least-squares diameter, minimum circumscribed diameter, maximum inscribed diameter and minimax diameter of cylindrical parts were given. The roundness profiles of two holes and two shafts were extracted and changed into their corresponding actual roundness profiles. Their global sizes were evaluated, and their measurement uncertainties were analyzed and estimated. The analysis and experiment results showed that the above measuring method can meet the measurement need of the global sizes of cylindrical parts for implementation of ISO 14405-1 in the manufacturing industry.

AB - The measurement method of the global sizes of cylindrical parts based on Talyrond 585LT and the standard ring was proposed. The changing processes from the roundness profiles measured by Talyrond 585LT to the actual roundness profiles was studied for holes and shafts, respectively. The evaluation models of the least-squares diameter, minimum circumscribed diameter, maximum inscribed diameter and minimax diameter of cylindrical parts were given. The roundness profiles of two holes and two shafts were extracted and changed into their corresponding actual roundness profiles. Their global sizes were evaluated, and their measurement uncertainties were analyzed and estimated. The analysis and experiment results showed that the above measuring method can meet the measurement need of the global sizes of cylindrical parts for implementation of ISO 14405-1 in the manufacturing industry.

KW - least-squares diameter

KW - minimum circumscribed diameter

KW - maximum inscribed diameter

KW - minimax diameter

M3 - Conference contribution

SP - 86

EP - 90

BT - 2019 25th International Conference on Automation & Computing (ICAC)

PB - IEEE

ER -

Zhao Z, Zhao X, Liu R, Ren D, Cao Y, Zeng W. Study on the measurement of global sizes of cylindrical parts using Talyrond 585LT. In 2019 25th International Conference on Automation & Computing (ICAC). IEEE. 2019. p. 86-90